LUM-ICCP-MIB
46 objects
The MIB module for management of ICCP. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The Node table contains each individual ICCP node. Every board in the physical node that supports ICCP is considered an individual ICCP node. (3) The Rg table contains information and configuration for ICCP tunnel, which is a connection between two Label Switch Router, LSRs.
Imported Objects
| LUM-REG | lumIccpMIB lumModules |
| LUM-TC | CommandString FaultStatus MgmtNameString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.61 | IdentitylumIccpMIBModule | The MIB module for management of ICCP. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables s… | ||
| 1.3.6.1.4.1.8708.2.61.1 | NodelumIccpConfs | |||
| 1.3.6.1.4.1.8708.2.61.1.1 | NodelumIccpGroups | |||
| 1.3.6.1.4.1.8708.2.61.1.1.1 | GroupiccpGeneralGroupV1 | current | The general objects. | |
| 1.3.6.1.4.1.8708.2.61.1.1.2 | GroupiccpNodeGroupV1 | current | The ICCP Node objects (R24.0). | |
| 1.3.6.1.4.1.8708.2.61.1.1.3 | GroupiccpRgGroupV1 | current | The ICCP Rg objects (R24.0). | |
| 1.3.6.1.4.1.8708.2.61.1.2 | NodelumIccpCompl | |||
| 1.3.6.1.4.1.8708.2.61.1.2.1 | CompliancelumIccpBasicComplV1 | current | Basic implementation requirements for the ICCP MIB. (R24.0) | |
| 1.3.6.1.4.1.8708.2.61.2 | NodelumIccpMIBObjects | |||
| 1.3.6.1.4.1.8708.2.61.2.1 | NodeiccpGeneral | |||
| 1.3.6.1.4.1.8708.2.61.2.1.1 | ScalariccpGeneralLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.61.2.1.2 | ScalariccpGeneralStateLastChangeTime | read-only | current | The time when the state of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.61.2.1.3 | ScalariccpGeneralIccpNodeTableSize | read-only | current | ToDo |
| 1.3.6.1.4.1.8708.2.61.2.1.4 | ScalariccpGeneralIccpRgTableSize | read-only | current | ToDo |
| 1.3.6.1.4.1.8708.2.61.2.2 | NodeiccpNodeList | |||
| 1.3.6.1.4.1.8708.2.61.2.2.1 | TableiccpNodeTable | not-accessible | current | The ICCP node list. Each individual board that supports ICCP node is considered a ICCP node. |
| 1.3.6.1.4.1.8708.2.61.2.2.1.1 | RowiccpNodeEntry | not-accessible | current | An entry in the ICCP node list. |
| 1.3.6.1.4.1.8708.2.61.2.2.1.1.1 | ColumniccpNodeIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.61.2.2.1.1.2 | ColumniccpNodeName | read-only | current | The management name of the group, for example ':1:2:lag1:1-2' (:[subrack]:[slot]:[LAG identifier]:[ port]) |
| 1.3.6.1.4.1.8708.2.61.2.2.1.1.3 | ColumniccpNodeSystemMacAddress | read-only | current | The system mac address. |
| 1.3.6.1.4.1.8708.2.61.2.2.1.1.4 | ColumniccpNodeCreateIccpRg | read-only | current | Create an Inter-Chassis Communication Protocol (ICCP) Redundancy Group (RG). Group ID - The two PE:s that protect the same LAG must have the same Group ID. MEP… |
| 1.3.6.1.4.1.8708.2.61.2.2.1.1.5 | ColumniccpNodeInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.61.2.3 | NodeiccpRgList | |||
| 1.3.6.1.4.1.8708.2.61.2.3.1 | TableiccpRgTable | not-accessible | current | The ICCP RG list. |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1 | RowiccpRgEntry | not-accessible | current | An entry in the ICCP RG list. |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.1 | ColumniccpRgIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.2 | ColumniccpRgName | read-only | current | The management name of the Redundancy Group, for example 'iccpRg:1:2:1' (iccpRg:[subrack]:[slot]:[redundancyGroupId]) |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.3 | ColumniccpRgDescr | read-write | current | User configurable label. |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.4 | ColumniccpRgRedundancyGroupId | read-write | current | The Group ID used by all of its members. |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.5 | ColumniccpRgRedundancyObjectId | read-write | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.6 | ColumniccpRgPeerMacAddress | read-write | current | User configurable label. |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.7 | ColumniccpRgPortId | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.8 | ColumniccpRgMepName | read-write | current | The management name of the mep used for communication. |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.9 | ColumniccpRgMepMaid | read-write | current | The management name of the mep maid used for communication. |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.10 | ColumniccpRgMepId | read-write | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.11 | ColumniccpRgMegGroupId | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.12 | ColumniccpRgMegLevel | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.13 | ColumniccpRgVlanId | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.14 | ColumniccpRgState | read-create | current | nonExistent - A connect message has not yet been sent to the peer mep. connecting - Periodical connect messages are being sent to the peer mep. operational - A… |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.15 | ColumniccpRgApplicationState | read-create | current | nonExistent - The ICCP RG state is not operational. reset - The ICCP RG state has transitioned to operational. connectSent - An application connect message bee… |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.16 | ColumniccpRgInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.17 | ColumniccpRgApplication | read-create | current | ICCP-RG State nonExistent - This state indicates that the Application Connection does not exist since there is no ICCP connection between the PEs. connecting -… |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.18 | ColumniccpRgCreateMcLag | read-only | current | Create a Multi-Chassis Link Aggregation Group (MC-LAG). Node ID - This MUST be unique in a Redundancy Group (RG). Be sure to use different values for both PE:s… |
| 1.3.6.1.4.1.8708.2.61.2.3.1.1.19 | ColumniccpRgCommunicationFailure | read-only | current | alarm - The MEP has either the Remote CCM or RDI CCM alarm set or the ICCP RG state is not operational ok - The MEP does not have the Remote CCM or RDI CCM ala… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IccpIdentifier | Unsigned32 (0..65535) | current | ICCP identifier type, 16-bit integer. |
| IccpLabel | Unsigned32 (0..1048575) | current | ICCP label with actual label range 16-1048575, 0-15 is reserved. |