LUM-IFAMPLIFIER-MIB
117 objects
The MIB module for management of amplifier objects. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The amplifier group contains information and configuration for high order amplifier object. The group is used for objects common for any amplifier type. (3) The module group contains information and configuration for all module objects. The group is used for representation of hardware modules on the board. (4) The raman group contains information and configuration for all Raman objects. The group is used for representation of amplifiers of Raman type. (5) The edfa group contains information and configuration for all EDFA objects. The group is used for representation of amplifiers of EDFA type.
Imported Objects
| LUM-REG | lumIfAmplifierMIB lumModules |
| LUM-TC | AdminStatusWithNA FaultStatusWithNA Integer32WithNA MgmtNameString OperStatusWithNA Signed32WithNA |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.65 | IdentitylumIfAmplifierMIBModule | The MIB module for management of amplifier objects. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps… | ||
| 1.3.6.1.4.1.8708.2.65.1 | NodelumIfAmplifierConfs | |||
| 1.3.6.1.4.1.8708.2.65.1.1 | NodelumIfAmplifierGroups | |||
| 1.3.6.1.4.1.8708.2.65.1.1.1 | GroupifAmplifierGeneralGroupV1 | current | The general objects. | |
| 1.3.6.1.4.1.8708.2.65.1.1.2 | GroupifAmplifierAmplifierGroupV1 | deprecated | The ifAmplifierAmplifier objects. | |
| 1.3.6.1.4.1.8708.2.65.1.1.3 | GroupifAmplifierModuleGroupV1 | current | The ifAmplifierModule objects. | |
| 1.3.6.1.4.1.8708.2.65.1.1.4 | GroupifAmplifierRamanGroupV1 | deprecated | The ifAmplifierRaman objects. | |
| 1.3.6.1.4.1.8708.2.65.1.1.5 | GroupifAmplifierEdfaGroupV1 | deprecated | The ifAmplifierEdfa objects. | |
| 1.3.6.1.4.1.8708.2.65.1.1.6 | GroupifAmplifierAmplifierGroupV2 | deprecated | The ifAmplifierAmplifier objects (27.0). | |
| 1.3.6.1.4.1.8708.2.65.1.1.7 | GroupifAmplifierEdfaGroupV2 | deprecated | The ifAmplifierEdfa objects (27.0). | |
| 1.3.6.1.4.1.8708.2.65.1.1.8 | GroupifAmplifierRamanGroupV2 | current | The ifAmplifierRaman objects (30.0). | |
| 1.3.6.1.4.1.8708.2.65.1.1.9 | GroupifAmplifierEdfaGroupV3 | current | The ifAmplifierEdfa objects (30.0). | |
| 1.3.6.1.4.1.8708.2.65.1.1.10 | GroupifAmplifierAmplifierGroupV3 | deprecated | The ifAmplifierAmplifier objects (30.0). | |
| 1.3.6.1.4.1.8708.2.65.1.1.11 | GroupifAmplifierAmplifierGroupV4 | current | The ifAmplifierAmplifier objects (31.1). | |
| 1.3.6.1.4.1.8708.2.65.1.2 | NodelumIfAmplifierCompl | |||
| 1.3.6.1.4.1.8708.2.65.1.2.1 | CompliancelumIfAmplifierComplV1 | deprecated | Basic implementation requirements for the ifAmplifier MIB. | |
| 1.3.6.1.4.1.8708.2.65.1.2.2 | CompliancelumIfAmplifierComplV2 | deprecated | Basic implementation requirements for the ifAmplifier MIB (27.0). | |
| 1.3.6.1.4.1.8708.2.65.1.2.3 | CompliancelumIfAmplifierComplV3 | deprecated | Basic implementation requirements for the ifAmplifier MIB (30.0). | |
| 1.3.6.1.4.1.8708.2.65.1.2.4 | CompliancelumIfAmplifierComplV4 | current | Basic implementation requirements for the ifAmplifier MIB (31.1). | |
| 1.3.6.1.4.1.8708.2.65.2 | NodelumIfAmplifierMIBObjects | |||
| 1.3.6.1.4.1.8708.2.65.2.1 | NodeifAmplifierGeneral | |||
| 1.3.6.1.4.1.8708.2.65.2.1.1 | ScalarifAmplifierGeneralConfigLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.65.2.1.2 | ScalarifAmplifierGeneralStateLastChangeTime | read-only | current | The time when the state and/or configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.65.2.1.3 | ScalarifAmplifierGeneralIfAmplifierAmplifierTableSize | read-only | current | Size of amplifier amplifier table. |
| 1.3.6.1.4.1.8708.2.65.2.1.4 | ScalarifAmplifierGeneralIfAmplifierAmplifierConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.65.2.1.5 | ScalarifAmplifierGeneralIfAmplifierAmplifierStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.65.2.1.6 | ScalarifAmplifierGeneralIfAmplifierModuleTableSize | read-only | current | Size of module amplifier table. |
| 1.3.6.1.4.1.8708.2.65.2.1.7 | ScalarifAmplifierGeneralIfAmplifierModuleConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.65.2.1.8 | ScalarifAmplifierGeneralIfAmplifierModuleStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.65.2.1.9 | ScalarifAmplifierGeneralIfAmplifierRamanTableSize | read-only | current | Size of Raman amplifier table. |
| 1.3.6.1.4.1.8708.2.65.2.1.10 | ScalarifAmplifierGeneralIfAmplifierRamanConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.65.2.1.11 | ScalarifAmplifierGeneralIfAmplifierRamanStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.65.2.1.12 | ScalarifAmplifierGeneralIfAmplifierEdfaTableSize | read-only | current | Size of EDFA amplifier table. |
| 1.3.6.1.4.1.8708.2.65.2.1.13 | ScalarifAmplifierGeneralIfAmplifierEdfaConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.65.2.1.14 | ScalarifAmplifierGeneralIfAmplifierEdfaStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.65.2.2 | NodeifAmplifierAmplifierList | |||
| 1.3.6.1.4.1.8708.2.65.2.2.1 | TableifAmplifierAmplifierTable | not-accessible | current | The amplifier group contains information and configuration for all amplifier objects. The group is used for objects common for any amplifier type. |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1 | RowifAmplifierAmplifierEntry | not-accessible | current | An entry in the ifAmplifier amplifier list. |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.1 | ColumnifAmplifierAmplifierIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.2 | ColumnifAmplifierAmplifierName | read-only | current | The management name of the amplifier object. |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.3 | ColumnifAmplifierAmplifierUId | read-only | current | A unique identifier assigned to each entry. |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.4 | ColumnifAmplifierAmplifierRxPower | read-only | current | The received signal power level in units of 0.1 dBm. |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.5 | ColumnifAmplifierAmplifierTxPower | read-only | current | The transmitted power level in units of 0.1 dBm. |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.6 | ColumnifAmplifierAmplifierWantedGain | read-write | current | The wanted signal gain setting in units of 0.1 dB. Range and default value depends on type of amplifier, see table below. Name Min Max Default OARAED21/HG Hybr… |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.7 | ColumnifAmplifierAmplifierActualGain | read-only | current | Actual measured gain in units of 0.1 dB. |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.8 | ColumnifAmplifierAmplifierAdminStatus | read-write | current | The administrative state of the interface. up - The interface is active. Pump(s) are activated if all activation criteria are fulfilled. down - The interface i… |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.9 | ColumnifAmplifierAmplifierOperStatus | read-only | current | The operational state of the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preventing its tr… |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.10 | ColumnifAmplifierAmplifierMidStageLoss | read-only | current | The calculated loss between the two amplifier stages in units of 0.1 dB. |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.11 | ColumnifAmplifierAmplifierTxIfIndex | read-only | current | The index number of the associated Tx port. |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.12 | ColumnifAmplifierAmplifierRxIfIndex | read-only | current | The index number of the associated Rx port. |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.13 | ColumnifAmplifierAmplifierSubrack | read-only | current | The subrack of the entry. |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.14 | ColumnifAmplifierAmplifierSlot | read-only | current | The slot of the entry. |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.15 | ColumnifAmplifierAmplifierOutputPowerFail | read-only | current | Output power failed alarm. If the difference of wanted gain and actual gain is larger than the safety margin and if the difference of output power and transmit… |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.16 | ColumnifAmplifierAmplifierSaturation | read-only | current | Saturation alarm. If the difference of wanted gain and actual gain is larger than 1.0 dB (safety margin) the amplifier is considered saturated. |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.17 | ColumnifAmplifierAmplifierFunctionalType | read-write | current | The functional type of amplifier. This attribute is ONLY used to describe how the amplifier is used and traffic is not affected if changed. undefined - default… |
| 1.3.6.1.4.1.8708.2.65.2.2.1.1.18 | ColumnifAmplifierAmplifierDescr | read-write | current | User configurable label. |
| 1.3.6.1.4.1.8708.2.65.2.3 | NodeifAmplifierModuleList | |||
| 1.3.6.1.4.1.8708.2.65.2.3.1 | TableifAmplifierModuleTable | not-accessible | current | The module group contains information and configuration for all module objects. The group is used for representation of hardware modules on the board. |
| 1.3.6.1.4.1.8708.2.65.2.3.1.1 | RowifAmplifierModuleEntry | not-accessible | current | An entry in the ifAmplifier module list. |
| 1.3.6.1.4.1.8708.2.65.2.3.1.1.1 | ColumnifAmplifierModuleIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.65.2.3.1.1.2 | ColumnifAmplifierModuleName | read-only | current | The management name of the module object. |
| 1.3.6.1.4.1.8708.2.65.2.3.1.1.3 | ColumnifAmplifierModuleUId | read-only | current | A unique identifier assigned to each entry. |
| 1.3.6.1.4.1.8708.2.65.2.3.1.1.4 | ColumnifAmplifierModuleTemperature | read-only | current | The actual module temperature in units of 0.1 degrees Celsius. |
| 1.3.6.1.4.1.8708.2.65.2.3.1.1.5 | ColumnifAmplifierModuleInfo | read-only | current | Module information about firmware and serial number of the module on the board. |
| 1.3.6.1.4.1.8708.2.65.2.3.1.1.6 | ColumnifAmplifierModuleHighModuleTemperature | read-only | current | The actual temperature is over the module internal temperature alarm threshold. |
| 1.3.6.1.4.1.8708.2.65.2.3.1.1.7 | ColumnifAmplifierModuleHighPumpCurrent | read-only | current | The actual pump current of any pump in the module is over the module internal pump current alarm threshold. |
| 1.3.6.1.4.1.8708.2.65.2.3.1.1.8 | ColumnifAmplifierModuleHighPumpTemperature | read-only | current | The actual pump temperature of any pump in the module is over the module internal pump temperature alarm threshold. |
| 1.3.6.1.4.1.8708.2.65.2.3.1.1.9 | ColumnifAmplifierModuleCommunicationFailure | read-only | current | Communication between the module and the traffic unit has failed. A: The module does not respond. D: Communication works. |
| 1.3.6.1.4.1.8708.2.65.2.3.1.1.10 | ColumnifAmplifierModuleColdRestart | read-write | current | Software initiated cold restart of the Amplifier Module. Cold restart process may take a few seconds, during this period traffic will be disturbed. |
| 1.3.6.1.4.1.8708.2.65.2.3.1.1.11 | ColumnifAmplifierModuleSubrack | read-only | current | The subrack of the entry. |
| 1.3.6.1.4.1.8708.2.65.2.3.1.1.12 | ColumnifAmplifierModuleSlot | read-only | current | The slot of the entry. |
| 1.3.6.1.4.1.8708.2.65.2.4 | NodeifAmplifierRamanList | |||
| 1.3.6.1.4.1.8708.2.65.2.4.1 | TableifAmplifierRamanTable | not-accessible | current | The Raman group contains information and configuration for all Raman objects. The group is used for representation of amplifiers of Raman type. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1 | RowifAmplifierRamanEntry | not-accessible | current | An entry in the ifAmplifier Raman list. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.1 | ColumnifAmplifierRamanIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.2 | ColumnifAmplifierRamanName | read-only | current | The management name of the Raman object. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.3 | ColumnifAmplifierRamanUId | read-only | current | A unique identifier assigned to each entry. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.4 | ColumnifAmplifierRamanLineFiberType | read-create | current | Line fiber type setting for the Raman amplifier. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.5 | ColumnifAmplifierRamanWantedGainTilt | read-write | current | The wanted Raman gain tilt. A negative value will amplify shorter wavelengths more than longer wavelengths. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.6 | ColumnifAmplifierRamanReceivedPowerLevel | read-only | current | The received power level on the Raman input interface. The presented power level includes both signal and optical noise. In contrast Raman Rx power level only … |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.7 | ColumnifAmplifierRamanPump1Power | read-only | current | Pump power of the first Raman pump in units of 0.1 dBm. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.8 | ColumnifAmplifierRamanPump1Status | read-only | current | Status of the first Raman pump. Can take values on or off. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.9 | ColumnifAmplifierRamanPump2Power | read-only | current | Pump power of the second Raman pump in units of 0.1 dBm. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.10 | ColumnifAmplifierRamanPump2Status | read-only | current | Status of the second Raman pump. Can take values on or off. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.11 | ColumnifAmplifierRamanTotalPumpPower | read-only | current | Combined Raman Pumps power in units of 0.1 dBm. This is the total optical power that will enter through Raman Rx port into the line fiber. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.12 | ColumnifAmplifierRamanBackReflectionPower | read-only | current | The Back reflected power of the Raman pump in units of 0.1 dBm. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.13 | ColumnifAmplifierRamanBackReflectionPowerRatio | read-only | current | The Back reflected power ratio of the Raman pump. This parameter is calculated by dividing the Total pump power by the back reflected power of the Raman. Prese… |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.14 | ColumnifAmplifierRamanHighBackReflection | read-only | current | High Back Reflection. When back reflection power ratio is below the High back reflection threshold the alarm is activated. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.15 | ColumnifAmplifierRamanHighBackReflectionThld | read-write | current | High Back Reflection Threshold. The threshold to trigger the High back reflection alarm. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.16 | ColumnifAmplifierRamanPointInsertionLoss | read-only | current | Point Insertion Loss. The calculated insertion loss between the Raman pump and line fiber. Value is given in units of 0.1 dB and cannot be positive. Recommende… |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.17 | ColumnifAmplifierRamanPointInsertionLossThld | read-write | current | Point Insertion Loss Threshold. Settable threshold for High point insertion loss alarm. If Point insertion loss is more negative than threshold High point inse… |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.18 | ColumnifAmplifierRamanHighPointInsertionLoss | read-only | current | High Point Insertion Loss. If Point insertion loss is below Point insertion loss threshold High point insertion loss alarm will be activated. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.19 | ColumnifAmplifierRamanRelatedAmplifierIndex | read-only | current | The index number of the associated Amplifier object. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.20 | ColumnifAmplifierRamanSubrack | read-only | current | The subrack of the entry. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.21 | ColumnifAmplifierRamanSlot | read-only | current | The slot of the entry. |
| 1.3.6.1.4.1.8708.2.65.2.4.1.1.22 | ColumnifAmplifierRamanActualGain | read-only | current | The actual gain contribution of the Raman amplifier stage. |
| 1.3.6.1.4.1.8708.2.65.2.5 | NodeifAmplifierEdfaList | |||
| 1.3.6.1.4.1.8708.2.65.2.5.1 | TableifAmplifierEdfaTable | not-accessible | current | The edfa group contains information and configuration for all EDFA objects. The group is used for representation of amplifiers of EDFA type. |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1 | RowifAmplifierEdfaEntry | not-accessible | current | An entry in the ifAmplifier EDFA list. |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.1 | ColumnifAmplifierEdfaIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.2 | ColumnifAmplifierEdfaName | read-only | current | The management name of the EDFA object. |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.3 | ColumnifAmplifierEdfaUId | read-only | current | A unique identifier assigned to each entry. |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.4 | ColumnifAmplifierEdfaWantedGainTilt | read-write | current | The wanted EDFA gain tilt. A negative value will amplify shorter wavelengths more than longer wavelengths. Range and default value depends on type of amplifier… |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.5 | ColumnifAmplifierEdfaTxPowerLimit | read-write | current | Settable limit for maximum allowed output power. Range and default value depends on type of amplifier. Name Min Max Default OARAED21/HG 15.0 21.5 21.5 OARAED21… |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.6 | ColumnifAmplifierEdfaPumpStatus | read-only | current | Status of the EDFA pump. Can take values on or off. |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.7 | ColumnifAmplifierEdfaBackReflectionPower | read-only | current | The Back reflected power of the EDFA output in units of 0.1 dBm. |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.8 | ColumnifAmplifierEdfaBackReflectionPowerRatio | read-only | current | The Back reflected power ratio of the EDFA output. This parameter is calculated by dividing the EDFA output power by the back reflected power of the EDFA. Pres… |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.9 | ColumnifAmplifierEdfaHighBackReflection | read-only | current | High Back Reflection. When back reflection power ratio is below the High back reflection threshold the alarm is activated. |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.10 | ColumnifAmplifierEdfaHighBackReflectionThld | read-write | current | High Back Reflection Threshold. The threshold to trigger the High back reflection alarm. |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.11 | ColumnifAmplifierEdfaSaturation | read-only | deprecated | Saturation alarm. If the difference of wanted gain and actual gain is larger than 1.0 dB the amplifier is considered saturated. |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.12 | ColumnifAmplifierEdfaMonitorPortLoss | read-only | current | Monitor port loss. The difference in attenuation between EDFA output and EDFA monitor port. This is a value that is module specific and is presented in units o… |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.13 | ColumnifAmplifierEdfaRelatedAmplifierIndex | read-only | current | The index number of the associated Amplifier object. |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.14 | ColumnifAmplifierEdfaSubrack | read-only | current | The subrack of the entry. |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.15 | ColumnifAmplifierEdfaSlot | read-only | current | The slot of the entry. |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.16 | ColumnifAmplifierEdfaPumpPower | read-only | current | Pump power of the EDFA pump in units of 0.1 dBm. |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.17 | ColumnifAmplifierEdfaPumpCurrent | read-only | current | Pump current of the EDFA pump in units of 0.1 mA. |
| 1.3.6.1.4.1.8708.2.65.2.5.1.1.18 | ColumnifAmplifierEdfaActualGain | read-only | current | The actual gain contribution of the EDFA amplifier stage. |