LUM-IFETH-MIB
82 objects
This module describes the ethernet. The references refers to IEEE 802.3-2008 Part 3. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The Physical group contains information and configuration for the eth physical layer. (3) The Mac group contains information and configuration for the eth mac layer.
Imported Objects
| LUM-REG | lumIfEthMIB lumModules |
| LUM-TC | AutoNegotiationStatus FaultStatusWithNA FlowControlMode MgmtNameString OnOff RsFecMode RsFecOnOff SignalStatusWithNA Unsigned32WithNA |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.54 | IdentitylumIfEthMIBModule | This module describes the ethernet. The references refers to IEEE 802.3-2008 Part 3. The tables contained in this MIB are: (1) The General group contains some … | ||
| 1.3.6.1.4.1.8708.2.54.1 | NodelumIfEthConfs | |||
| 1.3.6.1.4.1.8708.2.54.1.1 | NodelumIfEthGroups | |||
| 1.3.6.1.4.1.8708.2.54.1.1.1 | GroupifEthGeneralGroupV1 | deprecated | The general objects. | |
| 1.3.6.1.4.1.8708.2.54.1.1.2 | GroupifEthPhysicalGroupV1 | deprecated | The ifEth PHYSICAL objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.54.1.1.3 | GroupifEthMacGroupV1 | current | The ifEth MAC objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.54.1.1.4 | GroupifEthPhysicalGroupV2 | deprecated | The ifEth PHYSICAL objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.54.1.1.5 | GroupifEthPhysicalGroupV3 | deprecated | The ifEth PHYSICAL objects (R23.1). | |
| 1.3.6.1.4.1.8708.2.54.1.1.6 | GroupifEthPhysicalGroupV4 | deprecated | The ifEth PHYSICAL objects (R24). | |
| 1.3.6.1.4.1.8708.2.54.1.1.7 | GroupifEthPhysicalGroupV5 | current | The ifEth PHYSICAL objects (R27.1). | |
| 1.3.6.1.4.1.8708.2.54.1.1.8 | GroupifEthRsFecGroupV1 | current | The ifEth RS-FEC objects (R28.0). | |
| 1.3.6.1.4.1.8708.2.54.1.1.9 | GroupifEthGeneralGroupV2 | current | The general objects. | |
| 1.3.6.1.4.1.8708.2.54.1.2 | NodelumIfEthCompl | |||
| 1.3.6.1.4.1.8708.2.54.1.2.1 | CompliancelumIfEthComplV1 | deprecated | Basic implementation requirements for the ifEth MIB. (R20.0) | |
| 1.3.6.1.4.1.8708.2.54.1.2.2 | CompliancelumIfEthComplV2 | deprecated | Basic implementation requirements for the ifEth MIB. (R20.0) | |
| 1.3.6.1.4.1.8708.2.54.1.2.3 | CompliancelumIfEthComplV3 | deprecated | Basic implementation requirements for the ifEth MIB. (R23.1) | |
| 1.3.6.1.4.1.8708.2.54.1.2.4 | CompliancelumIfEthComplV4 | deprecated | Basic implementation requirements for the ifEth MIB. (R24) | |
| 1.3.6.1.4.1.8708.2.54.1.2.5 | CompliancelumIfEthComplV5 | deprecated | Basic implementation requirements for the ifEth MIB. (R27.1) | |
| 1.3.6.1.4.1.8708.2.54.1.2.6 | CompliancelumIfEthComplV6 | deprecated | Basic implementation requirements for the ifEth MIB. (R27.1) | |
| 1.3.6.1.4.1.8708.2.54.1.2.7 | CompliancelumIfEthComplV7 | current | Basic implementation requirements for the ifEth MIB. (R28.0) | |
| 1.3.6.1.4.1.8708.2.54.2 | NodelumIfEthMIBObjects | |||
| 1.3.6.1.4.1.8708.2.54.2.1 | NodeifEthGeneral | |||
| 1.3.6.1.4.1.8708.2.54.2.1.1 | ScalarifEthGeneralConfigLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.54.2.1.2 | ScalarifEthGeneralStateLastChangeTime | read-only | current | The time when the state and/or configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.54.2.1.3 | ScalarifEthGeneralIfEthPhysicalTableSize | read-only | current | Size of ifEthPhysical table. |
| 1.3.6.1.4.1.8708.2.54.2.1.4 | ScalarifEthGeneralIfEthPhysicalConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.54.2.1.5 | ScalarifEthGeneralIfEthPhysicalStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.54.2.1.6 | ScalarifEthGeneralIfEthMacTableSize | read-only | current | Size of ifeth mac table |
| 1.3.6.1.4.1.8708.2.54.2.1.7 | ScalarifEthGeneralIfEthMacConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.54.2.1.8 | ScalarifEthGeneralIfEthMacStateLastChangeTime | read-only | current | The time when the state and/or the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.54.2.1.9 | ScalarifEthGeneralIfEthRsFecTableSize | read-only | current | Size of ifeth rsfec table |
| 1.3.6.1.4.1.8708.2.54.2.1.10 | ScalarifEthGeneralIfEthRsFecConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.54.2.1.11 | ScalarifEthGeneralIfEthRsFecStateLastChangeTime | read-only | current | The time when the state and/or the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.54.2.2 | NodeifEthPhysicalList | |||
| 1.3.6.1.4.1.8708.2.54.2.2.1 | TableifEthPhysicalTable | not-accessible | current | The Physical group contains information and configuration for the eth physical layer. |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1 | RowifEthPhysicalEntry | not-accessible | current | An entry in the ifEth physical list. |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.1 | ColumnifEthPhysicalIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.2 | ColumnifEthPhysicalName | read-only | current | The management name of the optical transmission section, for example 'physical:1:2:1-2', where the first number indicates subrack, the second slot number and t… |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.3 | ColumnifEthPhysicalConnIfBasicIfIndex | read-only | current | An index that describes to which index in ifBasicIf table this object is related. |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.4 | ColumnifEthPhysicalAutoNegotiationMode | read-only | current | The wanted auto negotiation mode. off - auto negotiation process is disabled on - auto negotiation process is enabled notApplicable (2147483647) is used when a… |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.5 | ColumnifEthPhysicalAutoNegotiationStatus | read-only | current | The result of the auto negotiation procedure incomplete - the result is still pending halfDuplex - half duplex fullDuplex - full duplex halfDuplexRxPauseOn - h… |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.6 | ColumnifEthPhysicalRxUtilization | read-only | current | Shows a snapshot of the current bandwidth utilization of the received ethernet signal during the last second. |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.7 | ColumnifEthPhysicalTxUtilization | read-only | current | Shows a snapshot of the current bandwidth utilization of the received ethernet signal during the last second. |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.8 | ColumnifEthPhysicalTxSignalStatus | read-only | current | The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.9 | ColumnifEthPhysicalRxSignalStatus | read-only | current | The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.10 | ColumnifEthPhysicalRemoteLinkFault | read-only | current | Remote link fault (RLF). Reference: 1000Base-SX/LX: 37.2.1.5 RF1/RF2 IEEE 802.3ah alarm: Active remote link fault indication. ok: Inactive remote link fault in… |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.11 | ColumnifEthPhysicalLocalLinkFault | read-only | current | Local link fault (LLF). Reference: 49.2.4.5 => 46.3.4 (link_fault in 46.3.4.2) 49.2.13.3 alarm: Active local link fault indication. ok: Inactive local link fau… |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.12 | ColumnifEthPhysicalLinkDown | read-only | current | Link down. alarm: Failure to negotiate a connection with the other party. ok: A connection is negotiated. |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.13 | ColumnifEthPhysicalHighBitErrorRate | read-only | current | High bit error rate (Hi-Ber), BER > 10^(-4). Reference: 10GBase-R: 49.2.13.2.2 (hi_ber) IEEE 802.3ah alarm: Active high bit error rate. ok: Inactive high bit e… |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.14 | ColumnifEthPhysicalPcsLossOfFrame | read-only | current | Rx PCS Loss of frame (block-lock). Reference: 10GBase-R: 49.2.13.2.2 alarm: Active high bit error rate. ok: Inactive high bit error rate. |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.15 | ColumnifEthPhysicalRxLocalLinkFault | read-only | current | Rx Local link fault (LLF). Reference: 49.2.4.5 => 46.3.4 (link_fault in 46.3.4.2) 49.2.13.3 alarm: Active local link fault indication. ok: Inactive local link … |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.16 | ColumnifEthPhysicalTxLocalLinkFault | read-only | current | Tx Local link fault (LLF). Reference: 49.2.4.5 => 46.3.4 (link_fault in 46.3.4.2) 49.2.13.3 alarm: Active local link fault indication. ok: Inactive local link … |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.17 | ColumnifEthPhysicalRxHighBitErrorRate | read-only | current | Rx High bit error rate (Hi-Ber), BER > 10^(-4). Reference: 10GBase-R: 49.2.13.2.2 (hi_ber) IEEE 802.3ah alarm: Active high bit error rate. ok: Inactive high bi… |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.18 | ColumnifEthPhysicalTxHighBitErrorRate | read-only | current | Tx High bit error rate (Hi-Ber), BER > 10^(-4). Reference: 10GBase-R: 49.2.13.2.2 (hi_ber) IEEE 802.3ah alarm: Active high bit error rate. ok: Inactive high bi… |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.19 | ColumnifEthPhysicalTxPcsLossOfFrame | read-only | current | Tx PCS Loss of frame (block-lock). Reference: 10GBase-R: 49.2.13.2.2 alarm: Active high bit error rate. ok: Inactive high bit error rate. |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.20 | ColumnifEthPhysicalUId | read-only | current | An unique identifier assigned to each entry. |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.21 | ColumnifEthPhysicalRxPcsLossOfSync | read-only | current | RX PCS Loss of sync. Reference: 1000Base-X: 36.2.5.2.6 IEEE 802.3 alarm: GbE 'frame' can not be located. ok: GbE 'frame' is located. |
| 1.3.6.1.4.1.8708.2.54.2.2.1.1.22 | ColumnifEthPhysicalTxPcsLossOfSync | read-only | current | TX PCS Loss of sync. Reference: 1000Base-X: 36.2.5.2.6 IEEE 802.3 alarm: GbE 'frame' can not be located. ok: GbE 'frame' is located. |
| 1.3.6.1.4.1.8708.2.54.2.3 | NodeifEthMacList | |||
| 1.3.6.1.4.1.8708.2.54.2.3.1 | TableifEthMacTable | not-accessible | current | The Mac group contains information and configuration for the eth mac layer. |
| 1.3.6.1.4.1.8708.2.54.2.3.1.1 | RowifEthMacEntry | not-accessible | current | An entry in the ifEth mac list. |
| 1.3.6.1.4.1.8708.2.54.2.3.1.1.1 | ColumnifEthMacIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.54.2.3.1.1.2 | ColumnifEthMacName | read-only | current | The management name of the optical transmission section, for example 'mac:1:2:1-2', where the first number indicates subrack, the second slot number and the th… |
| 1.3.6.1.4.1.8708.2.54.2.3.1.1.3 | ColumnifEthMacConnIfBasicIfIndex | read-only | current | An index that describes to which index in ifBasicIf table this object is related. |
| 1.3.6.1.4.1.8708.2.54.2.3.1.1.4 | ColumnifEthMacRxUtilization | read-only | current | Shows a snapshot of the current bandwidth utilization of the received ethernet signal during the last second. |
| 1.3.6.1.4.1.8708.2.54.2.3.1.1.5 | ColumnifEthMacTxUtilization | read-only | current | Shows a snapshot of the current bandwidth utilization of the transmitted ethernet signal during the last second. |
| 1.3.6.1.4.1.8708.2.54.2.3.1.1.6 | ColumnifEthMacMaxMtuSize | read-only | current | The maximum size of the transmitted and received frames (in bytes). |
| 1.3.6.1.4.1.8708.2.54.2.3.1.1.7 | ColumnifEthMacInterPacketGap | read-only | current | Time between the frames in nano seconds. Legal values are 64, 72, 80, ... 200, 320, 328, 336, ... 456 |
| 1.3.6.1.4.1.8708.2.54.2.3.1.1.8 | ColumnifEthMacFlowControlMode | read-only | current | The mode for handling flow control between the local device and link partner. The PAUSE settings has the following meaning when auto-negotiation is enabled. Se… |
| 1.3.6.1.4.1.8708.2.54.2.3.1.1.9 | ColumnifEthMacTxSignalStatus | read-only | current | The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.54.2.3.1.1.10 | ColumnifEthMacRxSignalStatus | read-only | current | The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. notAp… |
| 1.3.6.1.4.1.8708.2.54.2.4 | NodeifEthRsFecList | |||
| 1.3.6.1.4.1.8708.2.54.2.4.1 | TableifEthRsFecTable | not-accessible | current | The RS-FEC group contains information and configuration for the eth-rsFec error correction. |
| 1.3.6.1.4.1.8708.2.54.2.4.1.1 | RowifEthRsFecEntry | not-accessible | current | An entry in the ifEth RS-Fec list. |
| 1.3.6.1.4.1.8708.2.54.2.4.1.1.1 | ColumnifEthRsFecIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.54.2.4.1.1.2 | ColumnifEthRsFecName | read-create | current | The management name of the RS-FEC object, for example 'clientRsFec:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fou… |
| 1.3.6.1.4.1.8708.2.54.2.4.1.1.3 | ColumnifEthRsFecConnIfBasicIfIndex | read-create | current | An index describing to which index in ifBasicIf table this object is related to. |
| 1.3.6.1.4.1.8708.2.54.2.4.1.1.4 | ColumnifEthRsFecTxSignalStatus | read-only | current | The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.54.2.4.1.1.5 | ColumnifEthRsFecRxSignalStatus | read-only | current | The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.54.2.4.1.1.6 | ColumnifEthRsFecMode | read-write | current | Set RS-FEC mode. auto - RS-FEC automatically enabled or disabled, according to detected transceiver type. forced on - RS-FEC always enabled, regardless of the … |
| 1.3.6.1.4.1.8708.2.54.2.4.1.1.7 | ColumnifEthRsFecActualRsFec | read-only | current | The actual RS-FEC configuration. off - RS-FEC is disabled for inserted transceiver type. on - RS-FEC is enabled for inserted transceiver type. undefined - not … |
| 1.3.6.1.4.1.8708.2.54.2.4.1.1.8 | ColumnifEthRsFecLanesAlignmentError | read-only | current | FEC-lanes alignment error. FEC-lanes alignment marker does not contain valid lane identification bytes to identify the lanes as they are received. Reference: I… |