LUM-IFFH-MIB
42 objects
This module describes the ethernet. The references refers to IEEE 802.3. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The Cpri group contains information and configuration for the FH Cpri protocol. (3) The Obsai group contains information and configuration for the FH Obsai protocol.
Imported Objects
| LUM-REG | lumIfFhMIB lumModules |
| LUM-TC | FaultStatusWithNA MgmtNameString SignalStatusWithNA Unsigned32WithNA |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.68 | IdentitylumIfFhMIBModule | This module describes the ethernet. The references refers to IEEE 802.3. The tables contained in this MIB are: (1) The General group contains some general attr… | ||
| 1.3.6.1.4.1.8708.2.68.1 | NodelumIfFhConfs | |||
| 1.3.6.1.4.1.8708.2.68.1.1 | NodelumIfFhGroups | |||
| 1.3.6.1.4.1.8708.2.68.1.1.1 | GroupifFhGeneralGroupV1 | current | The general objects. | |
| 1.3.6.1.4.1.8708.2.68.1.1.2 | GroupifFhCpriGroupV1 | current | The Cpri objects. | |
| 1.3.6.1.4.1.8708.2.68.1.1.3 | GroupifFhObsaiGroupV1 | current | The Obsai objects. | |
| 1.3.6.1.4.1.8708.2.68.1.2 | NodelumIfFhCompl | |||
| 1.3.6.1.4.1.8708.2.68.1.2.1 | CompliancelumIfFhComplV1 | current | Basic implementation requirements for the ifFh MIB. (R27.1) | |
| 1.3.6.1.4.1.8708.2.68.2 | NodelumIfFhMIBObjects | |||
| 1.3.6.1.4.1.8708.2.68.2.1 | NodeifFhGeneral | |||
| 1.3.6.1.4.1.8708.2.68.2.1.1 | ScalarifFhGeneralConfigLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.68.2.1.2 | ScalarifFhGeneralStateLastChangeTime | read-only | current | The time when the state and/or configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.68.2.1.3 | ScalarifFhGeneralIfFhCpriTableSize | read-only | current | Size of cpri table. |
| 1.3.6.1.4.1.8708.2.68.2.1.4 | ScalarifFhGeneralIfFhCpriConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.68.2.1.5 | ScalarifFhGeneralIfFhCpriStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.68.2.1.6 | ScalarifFhGeneralIfFhObsaiTableSize | read-only | current | Size of obsai table. |
| 1.3.6.1.4.1.8708.2.68.2.1.7 | ScalarifFhGeneralIfFhObsaiConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.68.2.1.8 | ScalarifFhGeneralIfFhObsaiStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.68.2.2 | NodeifFhCpriList | |||
| 1.3.6.1.4.1.8708.2.68.2.2.1 | TableifFhCpriTable | not-accessible | current | The Cpri group contains information and configuration for the fh cpri protocol. |
| 1.3.6.1.4.1.8708.2.68.2.2.1.1 | RowifFhCpriEntry | not-accessible | current | An entry in the ifFh Cpri list. |
| 1.3.6.1.4.1.8708.2.68.2.2.1.1.1 | ColumnifFhCpriIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.68.2.2.1.1.2 | ColumnifFhCpriUId | read-only | current | An unique identifier assigned to each entry. |
| 1.3.6.1.4.1.8708.2.68.2.2.1.1.3 | ColumnifFhCpriName | read-only | current | The management name of the object, for example 'cpri:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the ph… |
| 1.3.6.1.4.1.8708.2.68.2.2.1.1.4 | ColumnifFhCpriConnIfBasicIfIndex | read-only | current | An index that describes to which index in ifBasicIf table this object is related. |
| 1.3.6.1.4.1.8708.2.68.2.2.1.1.5 | ColumnifFhCpriTxSignalStatus | read-only | current | The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.68.2.2.1.1.6 | ColumnifFhCpriRxSignalStatus | read-only | current | The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.68.2.2.1.1.7 | ColumnifFhCpriTxLossOfFrame | read-only | current | TX Loss of frame. Reference: CPRI alarm: Detecting if hyper-frame alignment cannot be achieved or is lost. ok: If the hyper-frame alignment is achieved. |
| 1.3.6.1.4.1.8708.2.68.2.2.1.1.8 | ColumnifFhCpriRxLossOfFrame | read-only | current | RX Loss of frame. Reference: CPRI alarm: Detecting if hyper-frame alignment cannot be achieved or is lost. ok: If the hyper-frame alignment is achieved. |
| 1.3.6.1.4.1.8708.2.68.2.2.1.1.9 | ColumnifFhCpriRxSAPDefectInd | read-only | current | When the near end explicitly informs the far end equipment that the link shall not be used for any of the Service Access Points. Reference: CPRI alarm: When th… |
| 1.3.6.1.4.1.8708.2.68.2.2.1.1.10 | ColumnifFhCpriRxRemoteAlarmInd | read-only | current | Rx Remote Alarm Indication. Reference: CPRI alarm: Any errors, including LOS and LOF, that are linked to CPRI transceiver. ok: When no errors, including LOF an… |
| 1.3.6.1.4.1.8708.2.68.2.3 | NodeifFhObsaiList | |||
| 1.3.6.1.4.1.8708.2.68.2.3.1 | TableifFhObsaiTable | not-accessible | current | The Obsai group contains information and configuration for the fh obsai protocol. |
| 1.3.6.1.4.1.8708.2.68.2.3.1.1 | RowifFhObsaiEntry | not-accessible | current | An entry in the ifFh Obsai list. |
| 1.3.6.1.4.1.8708.2.68.2.3.1.1.1 | ColumnifFhObsaiIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.68.2.3.1.1.2 | ColumnifFhObsaiUId | read-only | current | An unique identifier assigned to each entry. |
| 1.3.6.1.4.1.8708.2.68.2.3.1.1.3 | ColumnifFhObsaiName | read-only | current | The management name of the object, for example 'obsai:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the p… |
| 1.3.6.1.4.1.8708.2.68.2.3.1.1.4 | ColumnifFhObsaiConnIfBasicIfIndex | read-only | current | An index that describes to which index in ifBasicIf table this object is related. |
| 1.3.6.1.4.1.8708.2.68.2.3.1.1.5 | ColumnifFhObsaiTxSignalStatus | read-only | current | The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.68.2.3.1.1.6 | ColumnifFhObsaiRxSignalStatus | read-only | current | The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.68.2.3.1.1.7 | ColumnifFhObsaiRxLossOfFrame | read-only | current | RX Loss of frame. Reference: OBSAI alarm: Detecting if hyper-frame alignment cannot be achieved or is lost. ok: If the hyper-frame alignment is achieved. |
| 1.3.6.1.4.1.8708.2.68.2.3.1.1.8 | ColumnifFhObsaiTxLossOfFrame | read-only | current | TX Loss of frame. Reference: OBSAI alarm: Detecting if hyper-frame alignment cannot be achieved or is lost. ok: If the hyper-frame alignment is achieved. |