MIB Viewer

LUM-IFOPTICAL-MIB

160 objects
The MIB module for management of optical parameters on port objects. This module describes the physical and channel layer in ITU-T Recommendation G.709. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The opticalTransmission (ots) group contains information and configuration for the Ots (optical transmission section) layer objects. (3) The opticalChannel (och) group contains information and configuration for the Och (optical channel) layer objects. (4) The digital signal rate (dsr) group contains information and configuration for the Dsr (digital signal rate) layer objects. (5) The opticalTransportLaneCarrier (otlc) group contains information and configuration for the Otlc (optical transport lane carrier) layer objects. (6) The opticalTransportLaneCarrierGroup (otlcg) group contains information and configuration for the Otlcg (optical transport lane carrier group) layer objects.
Imported Objects
LUM-REGlumIfOpticalMIB lumModules
LUM-TCBerLevelMTOSI DispersionSearchLimit EnabledDisabledWithNA FaultStatus FaultStatusWithNA FecType Frequency FrequencyOnlyNotApplicable LaneFrequency LaserMode MgmtNameString OnOff ResetWithNA SignalStatusWithNA Signed32WithNA Unsigned32WithNA
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime
OIDNameAccessStatusDescription
1.3.6.1.4.1.8708.1.1.48IdentitylumIfOpticalMIBModuleThe MIB module for management of optical parameters on port objects. This module describes the physical and channel layer in ITU-T Recommendation G.709. The ta…
1.3.6.1.4.1.8708.2.48.1NodelumIfOpticalConfs
1.3.6.1.4.1.8708.2.48.1.1NodelumIfOpticalGroups
1.3.6.1.4.1.8708.2.48.1.1.1GroupifOpticalGeneralGroupV1deprecatedThe general objects.
1.3.6.1.4.1.8708.2.48.1.1.2GroupifOpticalTransSectionGroupV1deprecatedThe ifOptical transmission section objects (R20.0).
1.3.6.1.4.1.8708.2.48.1.1.3GroupifOpticalChannelGroupV1deprecatedThe ifOptical channel objects (R20.0).
1.3.6.1.4.1.8708.2.48.1.1.4GroupifOpticalDigitalSignalRateGroupV1currentThe ifOptical digital signal rate objects (R20.0).
1.3.6.1.4.1.8708.2.48.1.1.5GroupifOpticalFecGroupV1deprecatedThe ifOptical Fec objects (R21.0).
1.3.6.1.4.1.8708.2.48.1.1.6GroupifOpticalGeneralGroupV2deprecatedThe general objects.
1.3.6.1.4.1.8708.2.48.1.1.7GroupifOpticalTransSectionGroupV2deprecatedThe ifOptical transmission section objects (R21.0).
1.3.6.1.4.1.8708.2.48.1.1.8GroupifOpticalGeneralGroupV3currentThe general objects.
1.3.6.1.4.1.8708.2.48.1.1.9GroupifOpticalTransLaneCarrierGroupV1currentThe ifOptical otlc objects (R22.0).
1.3.6.1.4.1.8708.2.48.1.1.10GroupifOpticalTransLaneCarrierGroupGroupV1deprecatedThe ifOptical otlcg objects (R22.0).
1.3.6.1.4.1.8708.2.48.1.1.11GroupifOpticalTransLaneCarrierGroupGroupV2deprecatedThe ifOptical otlcg objects (R23.0).
1.3.6.1.4.1.8708.2.48.1.1.12GroupifOpticalTransLaneCarrierGroupGroupV3currentThe ifOptical otlcg objects (R25.0).
1.3.6.1.4.1.8708.2.48.1.1.13GroupifOpticalTransSectionGroupV3deprecatedThe ifOptical transmission section objects (R26.0).
1.3.6.1.4.1.8708.2.48.1.1.14GroupifOpticalChannelGroupV2deprecatedThe ifOptical channel objects (R26.0).
1.3.6.1.4.1.8708.2.48.1.1.15GroupifOpticalFecGroupV2deprecatedThe ifOptical Fec objects (R26.0).
1.3.6.1.4.1.8708.2.48.1.1.16GroupifOpticalFecGroupV3currentThe ifOptical Fec objects (R28.1).
1.3.6.1.4.1.8708.2.48.1.1.17GroupifOpticalChannelGroupV3deprecatedThe ifOptical channel objects (R28.1).
1.3.6.1.4.1.8708.2.48.1.1.18GroupifOpticalTransSectionGroupV4currentThe ifOptical transmission section objects (R28.1).
1.3.6.1.4.1.8708.2.48.1.1.19GroupifOpticalChannelGroupV4currentThe ifOptical channel objects (R29.1).
1.3.6.1.4.1.8708.2.48.1.2NodelumIfOpticalCompl
1.3.6.1.4.1.8708.2.48.1.2.1CompliancelumIfOpticalComplV1deprecatedBasic implementation requirements for the ifOptical MIB. (R20.0)
1.3.6.1.4.1.8708.2.48.1.2.2CompliancelumIfOpticalComplV2deprecatedBasic implementation requirements for the ifOptical MIB v2. (R21.0)
1.3.6.1.4.1.8708.2.48.1.2.3CompliancelumIfOpticalComplV3deprecatedBasic implementation requirements for the ifOptical MIB v2. (R22.0)
1.3.6.1.4.1.8708.2.48.1.2.4CompliancelumIfOpticalComplV4deprecatedBasic implementation requirements for the ifOptical MIB v2. (R23.0)
1.3.6.1.4.1.8708.2.48.1.2.5CompliancelumIfOpticalComplV5deprecatedBasic implementation requirements for the ifOptical MIB v2. (R23.0)
1.3.6.1.4.1.8708.2.48.1.2.6CompliancelumIfOpticalComplV6deprecatedBasic implementation requirements for the ifOptical MIB v2. (R26.0)
1.3.6.1.4.1.8708.2.48.1.2.7CompliancelumIfOpticalComplV7deprecatedBasic implementation requirements for the ifOptical MIB v2. (R26.0)
1.3.6.1.4.1.8708.2.48.1.2.8CompliancelumIfOpticalComplV8deprecatedBasic implementation requirements for the ifOptical MIB v2. (R28.1)
1.3.6.1.4.1.8708.2.48.1.2.9CompliancelumIfOpticalComplV9deprecatedBasic implementation requirements for the ifOptical MIB v2. (R29.1)
1.3.6.1.4.1.8708.2.48.1.2.10CompliancelumIfOpticalComplV10currentBasic implementation requirements for the ifOptical MIB v2. (R30.1)
1.3.6.1.4.1.8708.2.48.2NodelumIfOpticalMIBObjects
1.3.6.1.4.1.8708.2.48.2.1NodeifOpticalGeneral
1.3.6.1.4.1.8708.2.48.2.1.1ScalarifOpticalGeneralConfigLastChangeTimeread-onlycurrentThe time when the configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.48.2.1.2ScalarifOpticalGeneralStateLastChangeTimeread-onlycurrentThe time when the state and/or configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.48.2.1.3ScalarifOpticalGeneralIfOpticalTransSectionTableSizeread-onlycurrentSize of optical section transmission table.
1.3.6.1.4.1.8708.2.48.2.1.4ScalarifOpticalGeneralIfOpticalTransSectionConfigLastChangeTimeread-onlycurrentThe time when the configuration of the table was last changed.
1.3.6.1.4.1.8708.2.48.2.1.5ScalarifOpticalGeneralIfOpticalTransSectionStateLastChangeTimeread-onlycurrentThe time when the state and/or configuration of the table was last changed.
1.3.6.1.4.1.8708.2.48.2.1.6ScalarifOpticalGeneralIfOpticalChannelTableSizeread-onlycurrentSize of channel section table
1.3.6.1.4.1.8708.2.48.2.1.7ScalarifOpticalGeneralIfOpticalChannelConfigLastChangeTimeread-onlycurrentThe time when the configuration of the table was last changed.
1.3.6.1.4.1.8708.2.48.2.1.8ScalarifOpticalGeneralIfOpticalChannelStateLastChangeTimeread-onlycurrentThe time when the state and/or the configuration of the table was last changed.
1.3.6.1.4.1.8708.2.48.2.1.9ScalarifOpticalGeneralIfOpticalDigitalSignalRateTableSizeread-onlycurrentSize of digital signal rate table
1.3.6.1.4.1.8708.2.48.2.1.10ScalarifOpticalGeneralIfOpticalDigitalSignalRateConfigLastChangeTimeread-onlycurrentThe time when the configuration of the table was last changed.
1.3.6.1.4.1.8708.2.48.2.1.11ScalarifOpticalGeneralIfOpticalDigitalSignalRateStateLastChangeTimeread-onlycurrentThe time when the state and/or configuration of the table was last changed.
1.3.6.1.4.1.8708.2.48.2.1.12ScalarifOpticalGeneralIfOpticalFecTableSizeread-onlycurrentSize of Fec table
1.3.6.1.4.1.8708.2.48.2.1.13ScalarifOpticalGeneralIfOpticalFecConfigLastChangeTimeread-onlycurrentThe time when the configuration of the table was last changed.
1.3.6.1.4.1.8708.2.48.2.1.14ScalarifOpticalGeneralIfOpticalFecStateLastChangeTimeread-onlycurrentThe time when the state and/or configuration of the table was last changed.
1.3.6.1.4.1.8708.2.48.2.1.15ScalarifOpticalGeneralIfOpticalTransLaneCarrierTableSizeread-onlycurrentSize of OpticalTransLaneCarrier table
1.3.6.1.4.1.8708.2.48.2.1.16ScalarifOpticalGeneralIfOpticalTransLaneCarrierConfigLastChangeTimeread-onlycurrentThe time when the configuration of the table was last changed.
1.3.6.1.4.1.8708.2.48.2.1.17ScalarifOpticalGeneralIfOpticalTransLaneCarrierStateLastChangeTimeread-onlycurrentThe time when the state and/or configuration of the table was last changed.
1.3.6.1.4.1.8708.2.48.2.1.18ScalarifOpticalGeneralIfOpticalTransLaneCarrierGroupTableSizeread-onlycurrentSize of OpticalTransLaneCarrierGroup table
1.3.6.1.4.1.8708.2.48.2.1.19ScalarifOpticalGeneralIfOpticalTransLaneCarrierGrConfigLastChangeTimeread-onlycurrentThe time when the configuration of the table was last changed.
1.3.6.1.4.1.8708.2.48.2.1.20ScalarifOpticalGeneralIfOpticalTransLaneCarrierGrStateLastChangeTimeread-onlycurrentThe time when the state and/or configuration of the table was last changed.
1.3.6.1.4.1.8708.2.48.2.2NodeifOpticalTransSectionList
1.3.6.1.4.1.8708.2.48.2.2.1TableifOpticalTransSectionTablenot-accessiblecurrentThe if optical transmission section interface list.
1.3.6.1.4.1.8708.2.48.2.2.1.1RowifOpticalTransSectionEntrynot-accessiblecurrentAn entry in the ifOptical transmission section list.
1.3.6.1.4.1.8708.2.48.2.2.1.1.1ColumnifOpticalTransSectionIndexread-onlycurrentAn index assigned to each entry.
1.3.6.1.4.1.8708.2.48.2.2.1.1.2ColumnifOpticalTransSectionNameread-createcurrentThe management name of the optical transmission section, for example 'ots:1:2:1-2', where the first number indicates subrack, the second slot number and the th…
1.3.6.1.4.1.8708.2.48.2.2.1.1.3ColumnifOpticalTransSectionConnIfBasicIfIndexread-createcurrentAn index describing to which index in ifBasicIf table this object is related to.
1.3.6.1.4.1.8708.2.48.2.2.1.1.4ColumnifOpticalTransSectionForwardAlsread-writecurrentForward Automatic Laser Shut-down. Decides if laser shutdown of the client should occur when a defect on the line or remote client is detected. disabled - The …
1.3.6.1.4.1.8708.2.48.2.2.1.1.5ColumnifOpticalTransSectionRxPowerLevelread-onlycurrentThe received power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.48.2.2.1.1.6ColumnifOpticalTransSectionRxPowerLevelLowRelativeThldread-onlycurrentThe lower threshold for received power level in units of 0.1 dB, relative to the receiver sensitivity.
1.3.6.1.4.1.8708.2.48.2.2.1.1.7ColumnifOpticalTransSectionTxPowerLevelread-onlycurrentThe transmitted power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.48.2.2.1.1.8ColumnifOpticalTransSectionLaserModeread-writecurrentThe administrative state of the TX-side laser. als - Automatic Laser Shutdown/Turn-Off when lossOfSignal is detected on the RX side of the trunk interface. for…
1.3.6.1.4.1.8708.2.48.2.2.1.1.9ColumnifOpticalTransSectionLaserStatusread-onlycurrentThe actual state of the TX-side laser. on - The laser is turned on. off - The laser is turned off.
1.3.6.1.4.1.8708.2.48.2.2.1.1.10ColumnifOpticalTransSectionReceiverSensitivityread-onlycurrentThe lowest power that the receiver is guaranteed to handle, in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.48.2.2.1.1.11ColumnifOpticalTransSectionTxSignalStatusread-onlycurrentThe state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
1.3.6.1.4.1.8708.2.48.2.2.1.1.12ColumnifOpticalTransSectionRxSignalStatusread-onlycurrentThe state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
1.3.6.1.4.1.8708.2.48.2.2.1.1.13ColumnifOpticalTransSectionLossOfSignalread-onlycurrentLoss of signal (LOS). The received signal has disappeared. alarm - Loss of signal active ok - Loss of signal is not active
1.3.6.1.4.1.8708.2.48.2.2.1.1.14ColumnifOpticalTransSectionRxPowerLevelLowread-onlycurrentLow rx power. Received power level low threshold exceeded. Applicable for all signal formats. alarm: The received power level is below the associated threshold…
1.3.6.1.4.1.8708.2.48.2.2.1.1.15ColumnifOpticalTransSectionRxPowerLevelHighread-onlycurrentHigh rx power. Received power level is too high. Applicable for all signal formats. alarm: The received power level is too high. ok: The received power level i…
1.3.6.1.4.1.8708.2.48.2.2.1.1.16ColumnifOpticalTransSectionRxExcessiveInputPowerread-onlycurrentExcessively high rx power. Received power level is excessively high. Applicable for all signal formats. alarm: The received power level is excessively high. ok…
1.3.6.1.4.1.8708.2.48.2.2.1.1.17ColumnifOpticalTransSectionTxPowerLowread-onlycurrentLow tx power. Transmit power is lower than the set threshold. Applicable for all signal formats. alarm: The transmit power level is lower than threshold. ok: T…
1.3.6.1.4.1.8708.2.48.2.2.1.1.18ColumnifOpticalTransSectionRxPowerLevelLowAbsoluteThldread-onlycurrentThe lower threshold for received power level in units of 0.1 dB.
1.3.6.1.4.1.8708.2.48.2.2.1.1.19ColumnifOpticalTransSectionLossThldread-onlycurrentThe threshold to declare LOS.
1.3.6.1.4.1.8708.2.48.2.2.1.1.20ColumnifOpticalTransSectionLaserForcedOnread-writecurrentWhen enabled, the laser is forced on regardless of circumstances. Be aware that enabling this mode might interfere with other functions and affect working traf…
1.3.6.1.4.1.8708.2.48.2.3NodeifOpticalChannelList
1.3.6.1.4.1.8708.2.48.2.3.1TableifOpticalChannelTablenot-accessiblecurrentThe if optical channel interface list.
1.3.6.1.4.1.8708.2.48.2.3.1.1RowifOpticalChannelEntrynot-accessiblecurrentAn entry in the ifOptical channel list.
1.3.6.1.4.1.8708.2.48.2.3.1.1.1ColumnifOpticalChannelIndexread-onlycurrentAn index assigned to each entry.
1.3.6.1.4.1.8708.2.48.2.3.1.1.2ColumnifOpticalChannelNameread-createcurrentThe management name of the optical channel, for example 'och:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth ar…
1.3.6.1.4.1.8708.2.48.2.3.1.1.3ColumnifOpticalChannelConnIfBasicIfIndexread-createcurrentAn index describing to which index in ifBasicIf table this object is related to.
1.3.6.1.4.1.8708.2.48.2.3.1.1.4ColumnifOpticalChannelTxFrequencyread-onlycurrentThe transmitted frequency given in wavelength nm or as channels. E.g. ch871 means the frequency 187.1 THz. w1310 means the wavelength 1310 nm.
1.3.6.1.4.1.8708.2.48.2.3.1.1.5ColumnifOpticalChannelExpectedTxFrequencyread-writecurrentThe expected frequency given in wavelength nm or as channels. E.g. ch871 means the frequency 187.1 THz. w1310 means the wavelength 1310 nm.
1.3.6.1.4.1.8708.2.48.2.3.1.1.6ColumnifOpticalChannelTxSignalStatusread-onlycurrentThe state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
1.3.6.1.4.1.8708.2.48.2.3.1.1.7ColumnifOpticalChannelRxSignalStatusread-onlycurrentThe state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
1.3.6.1.4.1.8708.2.48.2.3.1.1.8ColumnifOpticalChannelIllegalTxFrequencyread-onlycurrentIllegal tx frequency. The tx frequency supported by the transceiver is not recognized by the system. alarm: Invalid or unknown frequency information is detecte…
1.3.6.1.4.1.8708.2.48.2.3.1.1.9ColumnifOpticalChannelUnexpectedTxFrequencyread-onlycurrentUnexpected transmitted frequency. The actual frequency does not match the pre-configured frequency. A pre-configured frequency of '0' matches all actual freque…
1.3.6.1.4.1.8708.2.48.2.3.1.1.10ColumnifOpticalChannelNoTxFrequencySetread-onlycurrentNo tx frequency set. The tunable laser frequency has not been set. alarm: Tunable laser frequency is not set. ok: Tunable laser frequency is set.
1.3.6.1.4.1.8708.2.48.2.3.1.1.11ColumnifOpticalChannelDispersionSearchLimitread-onlycurrentThe upper search limit for the module dispersion compensator. Medium = 22,500 ps/nm, which corresponds to approximately 1300 km standard fiber. High = 30,000 p…
1.3.6.1.4.1.8708.2.48.2.3.1.1.12ColumnifOpticalChannelLaserNotTunedread-onlycurrentLaser not tuned. The tunable laser is not tuned to set frequency yet. This alarm can be cleared by setting the attribute LaserForcedOn to enabled. Note that th…
1.3.6.1.4.1.8708.2.48.2.3.1.1.13ColumnifOpticalChannelLineCodingread-onlycurrentLine coding. qam16 - 16QAM dqpsk - D-QPSK qpsk - QPSK notApplicable - 2147483647 is used to indicate that the attribute is not used on the board.
1.3.6.1.4.1.8708.2.48.2.4NodeifOpticalDigitalSignalRateList
1.3.6.1.4.1.8708.2.48.2.4.1TableifOpticalDigitalSignalRateTablenot-accessiblecurrentThe if optical digital signal rate interface list.
1.3.6.1.4.1.8708.2.48.2.4.1.1RowifOpticalDigitalSignalRateEntrynot-accessiblecurrentAn entry in the ifOptical digital signal rate list.
1.3.6.1.4.1.8708.2.48.2.4.1.1.1ColumnifOpticalDigitalSignalRateIndexread-onlycurrentAn index assigned to each entry.
1.3.6.1.4.1.8708.2.48.2.4.1.1.2ColumnifOpticalDigitalSignalRateNameread-onlycurrentThe management name of the optical channel, for example 'dsr:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth ar…
1.3.6.1.4.1.8708.2.48.2.4.1.1.3ColumnifOpticalDigitalSignalRateConnIfBasicIfIndexread-onlycurrentAn index describing to which index in ifBasicIf table this object is related to.
1.3.6.1.4.1.8708.2.48.2.4.1.1.5ColumnifOpticalDigitalSignalRateMaxBitRateread-onlycurrentThe max signal bit rate in units of 1,000 000 bits (mb) per second.
1.3.6.1.4.1.8708.2.48.2.4.1.1.6ColumnifOpticalDigitalSignalRateMinBitRateread-onlycurrentThe min signal bit rate in units of 1,000 000 bits (mb) per second.
1.3.6.1.4.1.8708.2.48.2.4.1.1.7ColumnifOpticalDigitalSignalRateTxSignalStatusread-onlycurrentThe state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
1.3.6.1.4.1.8708.2.48.2.4.1.1.8ColumnifOpticalDigitalSignalRateRxSignalStatusread-onlycurrentThe state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
1.3.6.1.4.1.8708.2.48.2.4.1.1.9ColumnifOpticalDigitalSignalRateLossOfLockread-onlycurrentLoss of lock. The receiver could not lock to the rate of the incoming signal. alarm: The signal could not be locked. ok: The signal could be locked.
1.3.6.1.4.1.8708.2.48.2.4.1.1.10ColumnifOpticalDigitalSignalRateBitrateUnavailableread-onlycurrentBitrate unavailable. The inserted transceiver does not support the requested bit rate. alarm: A transceiver with other supported bit rate than the requested bi…
1.3.6.1.4.1.8708.2.48.2.5NodeifOpticalFecList
1.3.6.1.4.1.8708.2.48.2.5.1TableifOpticalFecTablenot-accessiblecurrentThe if optical Fec list.
1.3.6.1.4.1.8708.2.48.2.5.1.1RowifOpticalFecEntrynot-accessiblecurrentAn entry in the ifOptical Fec list.
1.3.6.1.4.1.8708.2.48.2.5.1.1.1ColumnifOpticalFecIndexread-onlycurrentAn index assigned to each entry.
1.3.6.1.4.1.8708.2.48.2.5.1.1.2ColumnifOpticalFecNameread-createcurrentThe management name of the FEC object, for example 'lineFec:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are…
1.3.6.1.4.1.8708.2.48.2.5.1.1.3ColumnifOpticalFecConnIfBasicIfIndexread-createcurrentAn index describing to which index in ifBasicIf table this object is related to.
1.3.6.1.4.1.8708.2.48.2.5.1.1.4ColumnifOpticalFecTyperead-writecurrentSet type of FEC. g709 - 1st generation FEC according to ITU-T G.709 (near 6 dB coding gain). g9751I4 - FEC according to G975.1 I.4. Outer code: RS(1023,1007), …
1.3.6.1.4.1.8708.2.48.2.5.1.1.5ColumnifOpticalFecTxSignalStatusread-onlycurrentThe state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
1.3.6.1.4.1.8708.2.48.2.5.1.1.6ColumnifOpticalFecRxSignalStatusread-onlycurrentThe state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
1.3.6.1.4.1.8708.2.48.2.5.1.1.7ColumnifOpticalFecFailureread-onlycurrentFEC failure. Too many errors to get valid FEC statistics. It is not possible to run control loops based on FEC statistics. A: Too many errors to get valid FEC …
1.3.6.1.4.1.8708.2.48.2.5.1.1.8ColumnifOpticalFecSignalDegradedread-onlycurrentSignal degraded (SD). Too many error corrected. If more errors are corrected it might effect the client signal in a negative way.
1.3.6.1.4.1.8708.2.48.2.5.1.1.9ColumnifOpticalFecSignalDegradeThresholdread-writecurrentThreshold for signal degraded alarm, based on BER value. Predefined levels rxBerLevel1 = 1E-12 rxBerLevel2 = 1E-13 rxBerLevel3 = 1E-15 OSNRMargin1 = 0.5 dB mar…
1.3.6.1.4.1.8708.2.48.2.5.1.1.10ColumnifOpticalFecTypeUnavailableread-onlycurrentFec type unavailable. The inserted transceiver does not support the requested fec type. alarm: A transceiver with other supported fec type han the requested bi…
1.3.6.1.4.1.8708.2.48.2.5.1.1.11ColumnifOpticalFecUIdread-createcurrentUnique Identifier for the entry
1.3.6.1.4.1.8708.2.48.2.5.1.1.12ColumnifOpticalFecDecModeMismatchread-onlycurrentFEC decoding mode mismatch.
1.3.6.1.4.1.8708.2.48.2.6NodeifOpticalTransLaneCarrierList
1.3.6.1.4.1.8708.2.48.2.6.1TableifOpticalTransLaneCarrierTablenot-accessiblecurrentThe if optical transport lane carrier list. Structure and nomenclature in table is derived from G.709 fig. 7-1B
1.3.6.1.4.1.8708.2.48.2.6.1.1RowifOpticalTransLaneCarrierEntrynot-accessiblecurrentAn entry in the ifOptical transport lane carrier list.
1.3.6.1.4.1.8708.2.48.2.6.1.1.1ColumnifOpticalTransLaneCarrierIndexread-onlycurrentAn index assigned to each entry.
1.3.6.1.4.1.8708.2.48.2.6.1.1.2ColumnifOpticalTransLaneCarrierNameread-onlycurrentThe management name of the OTLC object, for example 'lineOtlc:1:2:1-2:1', where the first number indicates subrack, the second slot number, the third/fourth ar…
1.3.6.1.4.1.8708.2.48.2.6.1.1.3ColumnifOpticalTransLaneCarrierConnIfBasicIfIndexread-onlycurrentAn index describing to which index in ifBasicIf table this object is related to.
1.3.6.1.4.1.8708.2.48.2.6.1.1.4ColumnifOpticalTransLaneCarrierConnIfOpticalTransLaneCarrierGrIndexread-onlycurrentAn index describing to which index in ifOpticalTransLaneCarrierGroup table this object is related to.
1.3.6.1.4.1.8708.2.48.2.6.1.1.5ColumnifOpticalTransLaneCarrierLaneIdread-onlycurrentLane number.
1.3.6.1.4.1.8708.2.48.2.6.1.1.6ColumnifOpticalTransLaneCarrierTxSignalStatusread-onlycurrentThe state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
1.3.6.1.4.1.8708.2.48.2.6.1.1.7ColumnifOpticalTransLaneCarrierRxSignalStatusread-onlycurrentThe state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
1.3.6.1.4.1.8708.2.48.2.6.1.1.8ColumnifOpticalTransLaneCarrierRxPowerLevelread-onlycurrentThe received power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.48.2.6.1.1.9ColumnifOpticalTransLaneCarrierLossOfSignalread-onlycurrentLoss of signal (LOS). The received signal has disappeared. alarm - Loss Of Signal active ok - Loss of signal is not active
1.3.6.1.4.1.8708.2.48.2.6.1.1.10ColumnifOpticalTransLaneCarrierReceiverSensitivityread-onlycurrentThe lowest power that the receiver is guaranteed to handle, per lane, in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.48.2.6.1.1.11ColumnifOpticalTransLaneCarrierRxPowerLevelLowread-onlycurrentLow rx power. Received power level low threshold exceeded. Relative to the threshold in the OTLCG table (Lane sensitivity + threshold). Applicable for all sign…
1.3.6.1.4.1.8708.2.48.2.6.1.1.12ColumnifOpticalTransLaneCarrierTxFrequencyread-onlycurrentThe transmitted frequency given in wavelength nm or as channels. E.g. ch871 means the frequency 187.1 THz. w1310 means the wavelength 1310 nm.
1.3.6.1.4.1.8708.2.48.2.6.1.1.13ColumnifOpticalTransLaneCarrierCounterSesread-onlycurrentSeverely Errored Seconds. The counter associated with the number of errored seconds (seconds with LOS) in the interval per lane.
1.3.6.1.4.1.8708.2.48.2.6.1.1.14ColumnifOpticalTransLaneCarrierCounterSesResetread-onlydeprecatedReset SES Counter. After a successful reset the default value (normal) is restored in this attribute.
1.3.6.1.4.1.8708.2.48.2.7NodeifOpticalTransLaneCarrierGroupList
1.3.6.1.4.1.8708.2.48.2.7.1TableifOpticalTransLaneCarrierGroupTablenot-accessiblecurrentThe if optical transport lane carrier group list.
1.3.6.1.4.1.8708.2.48.2.7.1.1RowifOpticalTransLaneCarrierGroupEntrynot-accessiblecurrentAn entry in the ifOptical transport lane carrier group list.
1.3.6.1.4.1.8708.2.48.2.7.1.1.1ColumnifOpticalTransLaneCarrierGroupIndexread-onlycurrentAn index assigned to each entry.
1.3.6.1.4.1.8708.2.48.2.7.1.1.2ColumnifOpticalTransLaneCarrierGroupNameread-createcurrentThe management name of the OTLCG object, for example 'lineOtlcg:1:2:1-2', where the first number indicates subrack, the second slot number, the third/fourth ar…
1.3.6.1.4.1.8708.2.48.2.7.1.1.3ColumnifOpticalTransLaneCarrierGroupConnIfBasicIfIndexread-createcurrentAn index describing to which index in ifBasicIf table this object is related to.
1.3.6.1.4.1.8708.2.48.2.7.1.1.4ColumnifOpticalTransLaneCarrierGroupTxSignalStatusread-onlycurrentThe state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
1.3.6.1.4.1.8708.2.48.2.7.1.1.5ColumnifOpticalTransLaneCarrierGroupRxSignalStatusread-onlycurrentThe state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
1.3.6.1.4.1.8708.2.48.2.7.1.1.6ColumnifOpticalTransLaneCarrierGroupForwardAlsread-writecurrentForward Automatic Laser Shut-down. Decides if laser shutdown of the client should occur when a defect on the line or remote client is detected. disabled - The …
1.3.6.1.4.1.8708.2.48.2.7.1.1.7ColumnifOpticalTransLaneCarrierGroupLaserStatusread-onlycurrentThe actual state of the TX-side laser. on - The laser is turned on. off - The laser is turned off.
1.3.6.1.4.1.8708.2.48.2.7.1.1.8ColumnifOpticalTransLaneCarrierGroupTxPowerLevelread-onlycurrentThe total transmitted power level, including all lanes, in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.48.2.7.1.1.9ColumnifOpticalTransLaneCarrierGroupRxPowerLevelread-onlycurrentThe total received power level, including all lanes, in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.48.2.7.1.1.10ColumnifOpticalTransLaneCarrierGroupLossOfSignalread-onlycurrentLoss of signal (LOS). The received signal has disappeared. alarm - Loss Of Signal active ok - Loss of signal is not active
1.3.6.1.4.1.8708.2.48.2.7.1.1.11ColumnifOpticalTransLaneCarrierGroupRxPowerLevelLowRelativeThldread-onlycurrentThe lower threshold for received power level in units of 0.1 dB, relative to the receiver sensitivity. If multi lane transceiver is used this threshold is used…
1.3.6.1.4.1.8708.2.48.2.7.1.1.12ColumnifOpticalTransLaneCarrierGroupRxPowerLevelLowread-onlycurrentLow rx power. Received power level low threshold exceeded. If multi lane transceiver is used the threshold is exceeded on at least one lane. Applicable for all…
1.3.6.1.4.1.8708.2.48.2.7.1.1.13ColumnifOpticalTransLaneCarrierGroupTxFrequencyread-onlycurrentThe transmitted frequency given in wavelength nm or as channels, in case of multi lambda lane transciever this is the base frequency. E.g. ch871 means the freq…
1.3.6.1.4.1.8708.2.48.2.7.1.1.14ColumnifOpticalTransLaneCarrierGroupExpectedTxFrequencyread-onlycurrentThe expected frequency given in wavelength nm or as channels. E.g. ch871 means the frequency 187.1 THz. w1310 means the wavelength 1310 nm.
1.3.6.1.4.1.8708.2.48.2.7.1.1.15ColumnifOpticalTransLaneCarrierGroupUnexpectedTxFrequencyread-onlycurrentUnexpected transmitted frequency. The actual frequency does not match the pre-configured frequency. A pre-configured frequency of '0' matches all actual freque…
1.3.6.1.4.1.8708.2.48.2.7.1.1.16ColumnifOpticalTransLaneCarrierGroupIllegalTxFrequencyread-onlycurrentIllegal tx frequency. The tx frequency supported by the transceiver is not recognized by the system. alarm: Invalid or unknown frequency information is detecte…
1.3.6.1.4.1.8708.2.48.2.7.1.1.17ColumnifOpticalTransLaneCarrierGroupCounterSesResetread-onlycurrentReset SES Counter. After a successful reset the default value (normal) is restored in this attribute.
1.3.6.1.4.1.8708.2.48.2.7.1.1.18ColumnifOpticalTransLaneCarrierGroupMinimumLaneRxPowerLevelread-onlycurrentThe minimum received power level on any lane in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.48.2.7.1.1.19ColumnifOpticalTransLaneCarrierGroupReceiverLaneSensitivityread-onlycurrentThe lowest power that the receiver is guaranteed to handle, on a single lane, in units of 0.1 dBm.