LUM-IFSONET-MIB
52 objects
The MIB module for management of sonet parameters on port objects. This module describes the section and line sections in Sonet. References are referring to GR-253-CORE Telecordia Technologies Generic Requirement document, Issue 5 (Oct 2009). The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The section group contains information and configuration for the Sonet section. (3) The line group contains information and configuration for the Sonet line.
Imported Objects
| LUM-REG | lumIfSonetMIB lumModules |
| LUM-TC | DisplayStringWithNA EnabledDisabledWithNA FaultStatusWithNA MgmtNameString SignalStatusWithNA Unsigned32WithNA |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.53 | IdentitylumIfSonetMIBModule | The MIB module for management of sonet parameters on port objects. This module describes the section and line sections in Sonet. References are referring to GR… | ||
| 1.3.6.1.4.1.8708.2.53.1 | NodelumIfSonetConfs | |||
| 1.3.6.1.4.1.8708.2.53.1.1 | NodelumIfSonetGroups | |||
| 1.3.6.1.4.1.8708.2.53.1.1.1 | GroupifSonetGeneralGroupV1 | current | The general objects. | |
| 1.3.6.1.4.1.8708.2.53.1.1.2 | GroupifSonetSectionGroupV1 | deprecated | The ifSonet SECTION objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.53.1.1.3 | GroupifSonetLineGroupV1 | deprecated | The ifSonet LINE objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.53.1.1.4 | GroupifSonetLineGroupV2 | current | The ifSonet LINE objects (R24.0). | |
| 1.3.6.1.4.1.8708.2.53.1.1.5 | GroupifSonetSectionGroupV2 | current | The ifSonet SECTION objects (R24.0). | |
| 1.3.6.1.4.1.8708.2.53.1.2 | NodelumIfSonetCompl | |||
| 1.3.6.1.4.1.8708.2.53.1.2.1 | CompliancelumIfSonetComplV1 | deprecated | Basic implementation requirements for the ifSonet MIB. (R20.0) | |
| 1.3.6.1.4.1.8708.2.53.1.2.2 | CompliancelumIfSonetComplV2 | deprecated | Basic implementation requirements for the ifSonet MIB. (R24.0) | |
| 1.3.6.1.4.1.8708.2.53.1.2.3 | CompliancelumIfSonetComplV3 | current | Basic implementation requirements for the ifSonet MIB. (R24.0) | |
| 1.3.6.1.4.1.8708.2.53.2 | NodelumIfSonetMIBObjects | |||
| 1.3.6.1.4.1.8708.2.53.2.1 | NodeifSonetGeneral | |||
| 1.3.6.1.4.1.8708.2.53.2.1.1 | ScalarifSonetGeneralConfigLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.53.2.1.2 | ScalarifSonetGeneralStateLastChangeTime | read-only | current | The time when the state and/or configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.53.2.1.3 | ScalarifSonetGeneralIfSonetSectionTableSize | read-only | current | Size of section table. |
| 1.3.6.1.4.1.8708.2.53.2.1.4 | ScalarifSonetGeneralIfSonetSectionConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.53.2.1.5 | ScalarifSonetGeneralIfSonetSectionStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.53.2.1.6 | ScalarifSonetGeneralIfSonetLineTableSize | read-only | current | Size of line table |
| 1.3.6.1.4.1.8708.2.53.2.1.7 | ScalarifSonetGeneralIfSonetLineConfigLastChangeTime | read-only | current | The time when the configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.53.2.1.8 | ScalarifSonetGeneralIfSonetLineStateLastChangeTime | read-only | current | The time when the state and/or configuration of the table was last changed. |
| 1.3.6.1.4.1.8708.2.53.2.2 | NodeifSonetSectionList | |||
| 1.3.6.1.4.1.8708.2.53.2.2.1 | TableifSonetSectionTable | not-accessible | current | The section group contains information and configuration for the section. |
| 1.3.6.1.4.1.8708.2.53.2.2.1.1 | RowifSonetSectionEntry | not-accessible | current | An entry in the ifSonet section list. |
| 1.3.6.1.4.1.8708.2.53.2.2.1.1.1 | ColumnifSonetSectionIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.53.2.2.1.1.2 | ColumnifSonetSectionName | read-only | current | The management name of the Sonet section, for example 'section:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth … |
| 1.3.6.1.4.1.8708.2.53.2.2.1.1.3 | ColumnifSonetSectionConnIfBasicIfIndex | read-only | current | An index that describes to which index in ifBasicIf table this object is related. |
| 1.3.6.1.4.1.8708.2.53.2.2.1.1.4 | ColumnifSonetSectionOhTransparencyBitmask | read-only | current | The OH transparency bitmask. Bits: B1 = 0x01 E1 = 0x02 F1 = 0x04 D1-D3 = 0x08 J0 = 0x10 |
| 1.3.6.1.4.1.8708.2.53.2.2.1.1.5 | ColumnifSonetSectionTraceTransmitted | read-only | current | The trace to be transmitted from this interface. Default value: <IP address>:<subrack>:<slot>:<port> Note that only the last part of the address is used. The t… |
| 1.3.6.1.4.1.8708.2.53.2.2.1.1.6 | ColumnifSonetSectionTraceReceived | read-only | current | The received trace for this interface. The trace _notApplicable_ is used to tell SNMP clients that attribute is not used in current configuration. The trace _n… |
| 1.3.6.1.4.1.8708.2.53.2.2.1.1.7 | ColumnifSonetSectionTraceExpected | read-only | current | Trace used for matching against the received trace. The trace _notApplicable_ is used to tell SNMP clients that attribute is not used in current configuration. |
| 1.3.6.1.4.1.8708.2.53.2.2.1.1.8 | ColumnifSonetSectionTraceAlarmMode | read-only | current | Controls if the trace identifier mismatch alarm should be raised if received trace and expected trace differs. disabled - The alarm is disabled. enabled - The … |
| 1.3.6.1.4.1.8708.2.53.2.2.1.1.9 | ColumnifSonetSectionTxSignalStatus | read-only | current | The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.53.2.2.1.1.10 | ColumnifSonetSectionRxSignalStatus | read-only | current | The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.53.2.2.1.1.11 | ColumnifSonetSectionTraceMismatch | read-only | current | Trace identifier mismatch (TIM). Indicates if the expected trace identifier differs from the received trace identifier. Reference: GR-253/6.2.1.1.9. alarm: The… |
| 1.3.6.1.4.1.8708.2.53.2.2.1.1.12 | ColumnifSonetSectionLossOfFrame | read-only | current | Rx Section-Loss of frame (LOF). Reference: GR-253/6.2.1.1.2 alarm: A SECTION frame cannot be located. ok: A SECTION frame can be located. |
| 1.3.6.1.4.1.8708.2.53.2.2.1.1.13 | ColumnifSonetSectionTxLossOfFrame | read-only | current | Tx Section-Loss of frame (LOF). Reference: GR-253/6.2.1.1.2 alarm: A SECTION frame cannot be located. ok: A SECTION frame can be located. |
| 1.3.6.1.4.1.8708.2.53.2.3 | NodeifSonetLineList | |||
| 1.3.6.1.4.1.8708.2.53.2.3.1 | TableifSonetLineTable | not-accessible | current | The line group contains information and configuration for the line overhead. |
| 1.3.6.1.4.1.8708.2.53.2.3.1.1 | RowifSonetLineEntry | not-accessible | current | An entry in the ifSonet line list. |
| 1.3.6.1.4.1.8708.2.53.2.3.1.1.1 | ColumnifSonetLineIndex | read-only | current | An index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.53.2.3.1.1.2 | ColumnifSonetLineName | read-only | current | The management name of the Sonet line, for example 'line:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are th… |
| 1.3.6.1.4.1.8708.2.53.2.3.1.1.3 | ColumnifSonetLineConnIfBasicIfIndex | read-only | current | An index that describes to which index in ifBasicIf table this object is related. |
| 1.3.6.1.4.1.8708.2.53.2.3.1.1.4 | ColumnifSonetLineOhTransparencyBitmask | read-only | current | The OH transparency bitmask. Bits: B2 = 0x01 E2 = 0x02 D4-D12 = 0x04 K1-K2 = 0x08 |
| 1.3.6.1.4.1.8708.2.53.2.3.1.1.5 | ColumnifSonetLineTxSignalStatus | read-only | current | The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.53.2.3.1.1.6 | ColumnifSonetLineRxSignalStatus | read-only | current | The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK. |
| 1.3.6.1.4.1.8708.2.53.2.3.1.1.7 | ColumnifSonetLineRxAlarmIndicationSignal | read-only | current | Rx Line alarm indication signal (AIS). Reference: GR-253/6.2.1.2.1 alarm: An line AIS signal is detected. ok: The line AIS is cleared. |
| 1.3.6.1.4.1.8708.2.53.2.3.1.1.8 | ColumnifSonetLineRemoteDefectIndication | read-only | current | Rx Line remote defect indication (RDI). Reference: GR-253/6.2.1.3 alarm: RDI indication (in frame) active. ok: RDI indication inactive. |
| 1.3.6.1.4.1.8708.2.53.2.3.1.1.9 | ColumnifSonetLineTxAlarmIndicationSignal | read-only | current | Tx Line alarm indication signal (AIS). Reference: GR-253/6.2.1.2.1 alarm: An line AIS signal is detected. ok: The line AIS is cleared. |
| 1.3.6.1.4.1.8708.2.53.2.4 | NodeifSonetStsList | |||
| 1.3.6.1.4.1.8708.2.53.2.5 | NodeifSonetStsSpeList |