MIB Viewer

LUM-IP-MIB

98 objects
The IP and OSPF MIB. - General - IP addresses - IP routes - OSPF interfaces
Imported Objects
LUM-REGlumIpMIB lumModules
LUM-TCCommandString MgmtNameString
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIInteger32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime RowStatus
OIDNameAccessStatusDescription
1.3.6.1.4.1.8708.1.1.15IdentitylumIpMIBModuleThe IP and OSPF MIB. - General - IP addresses - IP routes - OSPF interfaces
1.3.6.1.4.1.8708.2.14.1NodelumIpConfs
1.3.6.1.4.1.8708.2.14.1.1NodelumIpGroups
1.3.6.1.4.1.8708.2.14.1.1.1GroupipGeneralGroupcurrentThe general objects.
1.3.6.1.4.1.8708.2.14.1.1.2GroupipIfGroupdeprecatedThe IP interface objects.
1.3.6.1.4.1.8708.2.14.1.1.3GroupipRouteGroupdeprecatedThe IP route objects.
1.3.6.1.4.1.8708.2.14.1.1.4GroupospfGeneralGroupcurrentThe OSPF general objects.
1.3.6.1.4.1.8708.2.14.1.1.5GroupospfIfGroupdeprecatedThe OSPF interface objects.
1.3.6.1.4.1.8708.2.14.1.1.6GroupospfNbrGroupdeprecatedThe OSPF neighbor objects.
1.3.6.1.4.1.8708.2.14.1.1.7GroupipGeneralGroupV2deprecatedThe general objects v2.
1.3.6.1.4.1.8708.2.14.1.1.8GroupipGeneralGroupV3currentThe general objects v3.
1.3.6.1.4.1.8708.2.14.1.1.9GroupipGeneralGroupV4deprecatedThe general objects v4.
1.3.6.1.4.1.8708.2.14.1.1.10GroupipRouteGroupV2currentThe IP route objects v2.
1.3.6.1.4.1.8708.2.14.1.1.11GroupospfNbrGroupV2currentThe OSPF neighbor objects v2.
1.3.6.1.4.1.8708.2.14.1.1.12GroupipGeneralGroupV5deprecatedThe general objects v5.
1.3.6.1.4.1.8708.2.14.1.1.13GroupospfIfGroupV2currentThe OSPF interface objects.
1.3.6.1.4.1.8708.2.14.1.1.14GroupipGeneralGroupV6deprecatedThe general objects v6.
1.3.6.1.4.1.8708.2.14.1.1.15GroupipGeneralGroupV7currentThe general objects v7.
1.3.6.1.4.1.8708.2.14.1.1.16GroupipIfGroupV2currentThe IP interface objects.
1.3.6.1.4.1.8708.2.14.1.2NodelumIpCompl
1.3.6.1.4.1.8708.2.14.1.2.1CompliancelumIpBasicComplV1deprecatedBasic implementation requirements for the IP MIB.
1.3.6.1.4.1.8708.2.14.1.2.2CompliancelumIpBasicComplV2deprecatedBasic implementation requirements for the IP MIB v2.
1.3.6.1.4.1.8708.2.14.1.2.3CompliancelumIpBasicComplV3deprecatedBasic implementation requirements for the IP MIB v3.
1.3.6.1.4.1.8708.2.14.1.2.4CompliancelumIpBasicComplV4deprecatedBasic implementation requirements for the IP MIB v4.
1.3.6.1.4.1.8708.2.14.1.2.5CompliancelumIpBasicComplV5deprecatedBasic implementation requirements for the IP MIB v5.
1.3.6.1.4.1.8708.2.14.1.2.6CompliancelumIpBasicComplV6deprecatedBasic implementation requirements for the IP MIB v6 (3.1).
1.3.6.1.4.1.8708.2.14.1.2.7CompliancelumIpBasicComplV7deprecatedBasic implementation requirements for the IP MIB v7 (13.0).
1.3.6.1.4.1.8708.2.14.1.2.8CompliancelumIpBasicComplV8deprecatedBasic implementation requirements for the IP MIB v8 (27.0).
1.3.6.1.4.1.8708.2.14.1.2.9CompliancelumIpBasicComplV9deprecatedBasic implementation requirements for the IP MIB v9 (30.1).
1.3.6.1.4.1.8708.2.14.1.2.10CompliancelumIpBasicComplV10currentBasic implementation requirements for the IP MIB v10 (32.0).
1.3.6.1.4.1.8708.2.14.2NodelumIpMIBObjects
1.3.6.1.4.1.8708.2.14.2.1NodeipGeneral
1.3.6.1.4.1.8708.2.14.2.1.1ScalaripGeneralLastChangeTimeread-onlycurrentThe time when the state of the MIB was last changed.
1.3.6.1.4.1.8708.2.14.2.1.2ScalaripGeneralNextMgmtAddressread-writecurrentThe IP address associated with the management interface. If set to 0.0.0.0 the IP address from the boot parameter area is used. Updating this variable requires…
1.3.6.1.4.1.8708.2.14.2.1.3ScalaripGeneralStoredMgmtAddressread-onlycurrentThe IP address associated with the management interface. Note that this address may be different from the one stored in the boot parameter area.
1.3.6.1.4.1.8708.2.14.2.1.4ScalaripGeneralNextMgmtNetMaskread-writecurrentThe subnet mask associated with the IP address of the management interface. The value of the mask is an IP address with all the network bits set to 1 and all t…
1.3.6.1.4.1.8708.2.14.2.1.5ScalaripGeneralStoredMgmtNetMaskread-onlycurrentThe subnet mask associated with the management interface. Note that this mask may be different from the one stored in the boot parameter area. The value of the…
1.3.6.1.4.1.8708.2.14.2.1.6ScalaripGeneralConfigLastChangeTimeread-onlycurrentThe time when the configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.14.2.1.7ScalaripGeneralTelnetModeread-onlycurrentEnables/disables the telnet service in the node. enabled - Telnet is enabled. disabled - Telnet is disabled.
1.3.6.1.4.1.8708.2.14.2.1.8ScalaripGeneralFtpModeread-onlycurrentEnables/disables access the file transfer (FTP) service in the network element. enabled - FTP is enabled. disabled - FTP is disabled.
1.3.6.1.4.1.8708.2.14.2.1.9ScalaripGeneralIfTableSizeread-onlycurrentNumber of rows available in the interface table.
1.3.6.1.4.1.8708.2.14.2.1.10ScalaripGeneralRouteTableSizeread-onlycurrentNumber of rows available in the route table.
1.3.6.1.4.1.8708.2.14.2.1.11ScalaripGeneralOspfIfTableSizeread-onlycurrentNumber of rows available in the OSPF interface table.
1.3.6.1.4.1.8708.2.14.2.1.12ScalaripGeneralOspfNbrTableSizeread-onlycurrentNumber of rows available in the OSPF neighbour table.
1.3.6.1.4.1.8708.2.14.2.1.13ScalaripGeneralChangeNextMgmtAddrread-writecurrentChange IP address and mask. If the address is set to 0.0.0.0 the IP address and net mask from the boot parameter area is used. Updating this variable requires …
1.3.6.1.4.1.8708.2.14.2.1.14ScalaripGeneralSftpModeread-onlycurrentIf this is enabled, then sftp is available on the node. enabled - SFTP is working. disabled - SFTP will not work on this node.
1.3.6.1.4.1.8708.2.14.2.1.15ScalaripGeneralTftpModeread-onlycurrentEnable or Disable the TFTP service on the CU for transferring files using DCN or the local craft ETH port (CU-SFP/III). enabled - TFTP server on CU (Control Un…
1.3.6.1.4.1.8708.2.14.2.1.16ScalaripGeneralNetconfModeread-onlycurrentEnable or Disable the NETCONF (Network Configuration Protocol) service for the network element. enabled - NETCONF is enabled. disabled - NETCONF is disabled.
1.3.6.1.4.1.8708.2.14.2.2NodeipIfList
1.3.6.1.4.1.8708.2.14.2.2.1TableipIfTablenot-accessiblecurrentThe IP interface table.
1.3.6.1.4.1.8708.2.14.2.2.1.1RowipIfEntrynot-accessiblecurrentAn entry in the IP interface table.
1.3.6.1.4.1.8708.2.14.2.2.1.1.1ColumnipIfIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.14.2.2.1.1.2ColumnipIfNameread-onlycurrentThe name of the object, for example 'eth1' or 'ppp-1-7'. For the latter the numbers indicate the subrack and slot number.
1.3.6.1.4.1.8708.2.14.2.2.1.1.3ColumnipIfAddrread-onlycurrentThe destination IP address of this route. Set to 0.0.0.0 if no address is assigned.
1.3.6.1.4.1.8708.2.14.2.2.1.1.4ColumnipIfNetMaskread-onlycurrentThe subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits …
1.3.6.1.4.1.8708.2.14.2.2.1.1.5ColumnipIfOperStatusread-onlycurrentThe operational state for the interface. down - The interfaces is disabled. up - The interface is ready to pass packages.
1.3.6.1.4.1.8708.2.14.2.2.1.1.6ColumnipIfDstAddrread-onlycurrentThe destination IP address of this interface. Set to 0.0.0.0 if no address is assigned.
1.3.6.1.4.1.8708.2.14.2.3NodeipRouteList
1.3.6.1.4.1.8708.2.14.2.3.1TableipRouteTablenot-accessiblecurrentStatically configured IP routes.
1.3.6.1.4.1.8708.2.14.2.3.1.1RowipRouteEntrynot-accessiblecurrentAn entry in the routing table.
1.3.6.1.4.1.8708.2.14.2.3.1.1.1ColumnipRouteIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.14.2.3.1.1.2ColumnipRouteDestread-writecurrentThe destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance o…
1.3.6.1.4.1.8708.2.14.2.3.1.1.3ColumnipRouteMaskread-writecurrentIndicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not s…
1.3.6.1.4.1.8708.2.14.2.3.1.1.4ColumnipRouteNextHopread-writecurrentOn remote routes, the address of the next system en route; Otherwise, 0.0.0.0. nextHop is restricted to the same sub-net as the node belongs.
1.3.6.1.4.1.8708.2.14.2.3.1.1.5ColumnipRouteIfNameread-writecurrentThe name of the local interface through which the next hop of this route should be reached. The following interface names are permitted: pn-n-n-n-n - In-band m…
1.3.6.1.4.1.8708.2.14.2.3.1.1.6ColumnipRouteRowStatusread-createcurrentManages creation and deletion of conceptual rows. See also SNMPv2-TC.
1.3.6.1.4.1.8708.2.14.2.3.1.1.7ColumnipRouteProtoread-onlycurrentThe routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th…
1.3.6.1.4.1.8708.2.14.2.3.1.1.8ColumnipRouteMetricread-writecurrentThe routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the routes ipRouteProto value. Note, this v…
1.3.6.1.4.1.8708.2.14.2.3.1.1.9ColumnipRouteOperStatusread-onlycurrentThe administrative state for the interface. down - The route is in-active. up - The route is active.
1.3.6.1.4.1.8708.2.14.2.3.1.1.10ColumnipRouteNameread-onlycurrentSymbolic name of the route entry.
1.3.6.1.4.1.8708.2.14.2.4NodeospfGeneral
1.3.6.1.4.1.8708.2.14.2.4.1ScalarospfGeneralRouterIdread-writecurrentThe IP address used as a router id for the OSPF routing protocol.
1.3.6.1.4.1.8708.2.14.2.4.2ScalarospfGeneralDistrModeread-writecurrentEnables/disables distribution of static routes throughout the OSPF routing domain (i.e. the so called AS). Note: The values for metric type and cost revert bac…
1.3.6.1.4.1.8708.2.14.2.4.3ScalarospfGeneralDistrMetricTyperead-writecurrentThe (common) metric type for all advertised static routes. See also RFC 2328 'OSPF Version 2'. Note: The values for metric type and cost revert back to default…
1.3.6.1.4.1.8708.2.14.2.4.4ScalarospfGeneralDistrMetricread-writecurrentThe (common) cost for all advertised static routes. Note: The values for metric type and cost revert back to default values when distribution is disabled.
1.3.6.1.4.1.8708.2.14.2.5NodeospfIfList
1.3.6.1.4.1.8708.2.14.2.5.1TableospfIfTablenot-accessiblecurrentThe OSPF Interface Table describes the interfaces from the viewpoint of OSPF.
1.3.6.1.4.1.8708.2.14.2.5.1.1RowospfIfEntrynot-accessiblecurrentThe OSPF Interface Entry describes one interface from the viewpoint of OSPF.
1.3.6.1.4.1.8708.2.14.2.5.1.1.1ColumnospfIfIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.14.2.5.1.1.3ColumnospfIfNameread-createcurrentThe name of the interface. OSPF configuration is not permitted on the following interfaces: The following interface names are permitted: eth1 - The management …
1.3.6.1.4.1.8708.2.14.2.5.1.1.4ColumnospfIfAreaIdread-writecurrentA 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
1.3.6.1.4.1.8708.2.14.2.5.1.1.5ColumnospfIfMetricread-writecurrentThe OSPF internal cost.
1.3.6.1.4.1.8708.2.14.2.5.1.1.6ColumnospfIfRtrPriorityread-writecurrentThe priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r…
1.3.6.1.4.1.8708.2.14.2.5.1.1.7ColumnospfIfDesignatedRouterIdread-onlycurrentThe router id of the designated router for the network to which the interface connects. 0.0.0.0 means that there is no designated router.
1.3.6.1.4.1.8708.2.14.2.5.1.1.8ColumnospfIfBackupDesignatedRouterIdread-onlycurrentThe router id of the backup designated router for the network to which the interface connects. 0.0.0.0 means that there is no backup designated router.
1.3.6.1.4.1.8708.2.14.2.5.1.1.9ColumnospfIfAdminStatusread-writecurrentThe OSPF administrative status of the interface. The value formed on the interface, and the interface will be advertised as an internal route to some area. The…
1.3.6.1.4.1.8708.2.14.2.5.1.1.10ColumnospfIfOperStatusread-onlycurrentThe OSPF operative status of the interface. See also RFC 2328 'OSPF Version 2'. down loopback waiting ptp - point to point dr - designated router bdr - backup …
1.3.6.1.4.1.8708.2.14.2.5.1.1.11ColumnospfIfRowStatusread-createcurrentThis variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implem…
1.3.6.1.4.1.8708.2.14.2.5.1.1.12ColumnospfIfPassiveread-writecurrentOSPF Passive mode. If OSPF Passive mode is set to enable, OSPF will not advertice itself on this interface. This interface will however be adverticed on other …
1.3.6.1.4.1.8708.2.14.2.6NodeospfNbrList
1.3.6.1.4.1.8708.2.14.2.6.1TableospfNbrTablenot-accessiblecurrentOSPF Neighbors.
1.3.6.1.4.1.8708.2.14.2.6.1.1RowospfNbrEntrynot-accessiblecurrentThe OSPF Neighbor Table describes all neighbors in the locality of the subject router.
1.3.6.1.4.1.8708.2.14.2.6.1.1.1ColumnospfNbrIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.14.2.6.1.1.2ColumnospfNbrIpAddrread-onlycurrentThe IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the address of another of the ne…
1.3.6.1.4.1.8708.2.14.2.6.1.1.3ColumnospfNbrRtrIdread-onlycurrentAn IP address uniquely identifying the neighboring router in the Autonomous System.
1.3.6.1.4.1.8708.2.14.2.6.1.1.4ColumnospfNbrIfNameread-onlycurrentThe name of the local interface the neighboring router has been discovered on.
1.3.6.1.4.1.8708.2.14.2.6.1.1.5ColumnospfNbrOperStatusread-onlycurrentThe state of the relationship with this neighbor. See also RFC 2328 'OSPF Version 2'.
1.3.6.1.4.1.8708.2.14.2.6.1.1.6ColumnospfNbrNameread-onlycurrentA symbolic name of the neighbor.