LUM-MCLAG-MIB
32 objects
The MIB module for management of MCLAG. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The MCLAG table contains information and configuration for all interfaces available for MCLAG.
Imported Objects
| LUM-REG | lumMclagMIB lumModules |
| LUM-TC | FaultStatus MgmtNameString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.62 | IdentitylumMclagMIBModule | The MIB module for management of MCLAG. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables … | ||
| 1.3.6.1.4.1.8708.2.62.1 | NodelumMclagConfs | |||
| 1.3.6.1.4.1.8708.2.62.1.1 | NodelumMclagGroups | |||
| 1.3.6.1.4.1.8708.2.62.1.1.1 | GroupmclagGeneralGroupV1 | current | The general objects. | |
| 1.3.6.1.4.1.8708.2.62.1.1.2 | GroupmclagGroupV1 | current | The MCLAG Node objects (R24.0). | |
| 1.3.6.1.4.1.8708.2.62.1.2 | NodelumMclagCompl | |||
| 1.3.6.1.4.1.8708.2.62.1.2.1 | CompliancelumMclagBasicComplV1 | current | Basic implementation requirements for the MC-LAG MIB. (R24.0) | |
| 1.3.6.1.4.1.8708.2.62.2 | NodelumMclagMIBObjects | |||
| 1.3.6.1.4.1.8708.2.62.2.1 | NodemclagGeneral | |||
| 1.3.6.1.4.1.8708.2.62.2.1.1 | ScalarmclagGeneralLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.62.2.1.2 | ScalarmclagGeneralStateLastChangeTime | read-only | current | The time when the state of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.62.2.1.3 | ScalarmclagGeneralMclagTableSize | read-only | current | Size of mclag table |
| 1.3.6.1.4.1.8708.2.62.2.2 | NodemclagList | |||
| 1.3.6.1.4.1.8708.2.62.2.2.1 | TablemclagTable | not-accessible | current | The MC-LAG RG list. |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1 | RowmclagEntry | not-accessible | current | An entry in the MC-LAG RG list. |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1.1 | ColumnmclagIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1.2 | ColumnmclagName | read-only | current | The management name of the MC-LAG, for example 'mcLag:1:2:TM-LAG' (mcLag:[subrack]:[slot]:[LAG identifier]) |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1.3 | ColumnmclagDescr | read-write | current | User configurable label. |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1.4 | ColumnmclagNodeId | read-write | current | Used to ensure that the LACP Port Numbers are unique across all PE:s in a Redundancy Group. |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1.5 | ColumnmclagRgId | read-write | current | The Redundancy Group ID of the ICCP channel being used. |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1.6 | ColumnmclagSynchronizationStatus | read-create | current | synchronized - The MC-LAG has received the configuration TLVs from its peer. unSynchronized - The MC-LAG has not yet received the configuration TLVs from its p… |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1.7 | ColumnmclagControlledLag | read-write | current | The identifier of the controlled LAG. |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1.8 | ColumnmclagLagAdminSystemPrio | read-create | current | The Administrative System Priority is used in the initial negotiation with the other PE in the Redundancy Group. It is necessary for all PE:s in a Redundancy G… |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1.9 | ColumnmclagLagOperSystemPrio | read-create | current | The Operational System Priority is the result of the initial negotiation. Every PE use the values for System MAC Address and System Priority that are supplied … |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1.10 | ColumnmclagLagAdminPortPrio | read-create | current | The Administrative Port Priority is used on all LACP ports in the controlled LAG. Note! A change of the Administrative Port Priority may cause a traffic distur… |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1.11 | ColumnmclagLagOperPortPrio | read-create | current | The Operational Port Priority is used on all LACP ports in the controlled LAG. This attribute can be written via SNMP. |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1.12 | ColumnmclagLagStatus | read-create | current | active - The LACP selection logic of the controlled LAG has determined that a local port has a higher Port Aggregation Priority. standby - The LACP selection l… |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1.13 | ColumnmclagProtectionStateFailure | read-only | current | alarm - The ICCP RG does not have the Communication Failure alarm set and both the local and remote LAG has the LAG failure alarm active. ok - One of the membe… |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1.14 | ColumnmclagProtectionStateDegraded | read-only | current | alarm - The ICCP RG has the Communication Failure alarm active, or either the local or remote LAG has the LAG failure alarm active. ok - The ICCP RG does not h… |
| 1.3.6.1.4.1.8708.2.62.2.2.1.1.15 | ColumnmclagInternalReference | read-create | current | For internal use only. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MclagIdentifier | Unsigned32 (0..65535) | current | MCLAG identifier type, 16-bit integer. |
| MclagLabel | Unsigned32 (0..1048575) | current | MCLAG label with actual label range 16-1048575, 0-15 is reserved. |