LUM-MPLS-MIB
168 objects
The MIB module for management of MPLS. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The IF (interface) table contains information and configuration for all interfaces available for MPLS. (3) The XC table is used to associate in and out segments together, in order to form a cross-connect. (4) The Node table contains general information and configuration for each individual MPLS node. Every board in the physical node that supports MPLS is considered an individual MPLS node. (4) The tunnel table contains information and configuration for MPLS tunnel, which is a connection between two Label Switch Router, LSRs. (5) The LSP table contains information and configuration for each individual bidirectional Label Switched Path, LSP. (6) The tunnel-lsp table contains information about cross reference of tunnel and LSP.
Imported Objects
| LUM-REG | lumModules lumMplsMIB |
| LUM-TC | CommandString MgmtNameString MplsLabel PortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.40 | IdentitylumMplsMIBModule | The MIB module for management of MPLS. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables s… | ||
| 1.3.6.1.4.1.8708.2.40.1 | NodelumMplsConfs | |||
| 1.3.6.1.4.1.8708.2.40.1.1 | NodelumMplsGroups | |||
| 1.3.6.1.4.1.8708.2.40.1.1.1 | GroupmplsGeneralGroupV1 | current | The general objects. | |
| 1.3.6.1.4.1.8708.2.40.1.1.2 | GroupmplsIfGroupV1 | deprecated | The MPLS if objects (R18.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.3 | GroupmplsXCGroupV1 | current | The MPLS cross-connect objects (R18.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.4 | GroupmplsTunnelGroupV1 | deprecated | The MPLS tunnel objects (R18.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.5 | GroupmplsNodeGroupV1 | deprecated | The MPLS node objects (R18.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.6 | GroupmplsLspGroupV1 | deprecated | The MPLS LSP objects (R18.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.7 | GroupmplsTnlXLspV1 | current | The MPLS tunnel LSP cross reference table (R18.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.8 | GroupmplsTunnelGroupV2 | deprecated | The MPLS tunnel objects (R19.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.9 | GroupmplsNodeGroupV2 | deprecated | The MPLS node objects (R19.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.10 | GroupmplsLspGroupV2 | deprecated | The MPLS LSP objects (R19.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.11 | GroupmplsNodeGroupV3 | deprecated | The MPLS node objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.12 | GroupmplsTunnelGroupV3 | deprecated | The MPLS tunnel objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.13 | GroupmplsLspGroupV3 | deprecated | The MPLS LSP objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.14 | GroupmplsNodeGroupV4 | deprecated | The MPLS node objects (R23.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.15 | GroupmplsLspGroupV4 | deprecated | The MPLS LSP objects (R24.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.16 | GroupmplsTunnelGroupV4 | current | The MPLS tunnel objects (R24.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.17 | GroupmplsIfGroupV2 | current | The MPLS if objects (R28.0). | |
| 1.3.6.1.4.1.8708.2.40.1.1.18 | GroupmplsNodeGroupV5 | current | The MPLS node objects (R30.1). | |
| 1.3.6.1.4.1.8708.2.40.1.1.19 | GroupmplsLspGroupV5 | current | The MPLS LSP objects (R30.1). | |
| 1.3.6.1.4.1.8708.2.40.1.2 | NodelumMplsCompl | |||
| 1.3.6.1.4.1.8708.2.40.1.2.1 | CompliancelumMplsBasicComplV1 | deprecated | Basic implementation requirements for the MPLS MIB. (R18.0) | |
| 1.3.6.1.4.1.8708.2.40.1.2.2 | CompliancelumMplsBasicComplV2 | deprecated | Basic implementation requirements for the MPLS MIB. (R19.0) | |
| 1.3.6.1.4.1.8708.2.40.1.2.3 | CompliancelumMplsBasicComplV3 | deprecated | Basic implementation requirements for the MPLS MIB. (R20.0) | |
| 1.3.6.1.4.1.8708.2.40.1.2.4 | CompliancelumMplsBasicComplV4 | deprecated | Basic implementation requirements for the MPLS MIB. (R21.0) | |
| 1.3.6.1.4.1.8708.2.40.1.2.5 | CompliancelumMplsBasicComplV5 | deprecated | Basic implementation requirements for the MPLS MIB. (R21.0) | |
| 1.3.6.1.4.1.8708.2.40.1.2.6 | CompliancelumMplsBasicComplV6 | deprecated | Basic implementation requirements for the MPLS MIB. (R24.0) | |
| 1.3.6.1.4.1.8708.2.40.1.2.7 | CompliancelumMplsBasicComplV7 | deprecated | Basic implementation requirements for the MPLS MIB. (R28.0) | |
| 1.3.6.1.4.1.8708.2.40.1.2.8 | CompliancelumMplsBasicComplV8 | current | Basic implementation requirements for the MPLS MIB. (R30.1) | |
| 1.3.6.1.4.1.8708.2.40.2 | NodelumMplsMIBObjects | |||
| 1.3.6.1.4.1.8708.2.40.2.1 | NodemplsGeneral | |||
| 1.3.6.1.4.1.8708.2.40.2.1.1 | ScalarmplsGeneralLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.40.2.1.2 | ScalarmplsGeneralStateLastChangeTime | read-only | current | The time when the state of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.40.2.1.3 | ScalarmplsGeneralMplsIfTableSize | read-only | current | Size of interface table |
| 1.3.6.1.4.1.8708.2.40.2.1.4 | ScalarmplsGeneralMplsXCTableSize | read-only | current | Size of cross connect table |
| 1.3.6.1.4.1.8708.2.40.2.1.5 | ScalarmplsGeneralMplsTunnelTableSize | read-only | current | Size of tunnel table |
| 1.3.6.1.4.1.8708.2.40.2.1.6 | ScalarmplsGeneralMplsNodeTableSize | read-only | current | Size of node table |
| 1.3.6.1.4.1.8708.2.40.2.1.7 | ScalarmplsGeneralMplsLspTableSize | read-only | current | Size of LSP table |
| 1.3.6.1.4.1.8708.2.40.2.1.8 | ScalarmplsGeneralMplsTnlXLspTableSize | read-only | current | Size of Tunnel LSP cross reference table |
| 1.3.6.1.4.1.8708.2.40.2.2 | NodemplsIfList | |||
| 1.3.6.1.4.1.8708.2.40.2.2.1 | TablemplsIfTable | not-accessible | current | The MPLS interface list. |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1 | RowmplsIfEntry | not-accessible | current | An entry in the mpls interface list. |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.1 | ColumnmplsIfIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.2 | ColumnmplsIfName | read-only | current | The management name of the interface, for example 'if:1:2:myIdentifier', where the first number indicates subrack and the second slot number. |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.3 | ColumnmplsIfSubrack | read-only | current | The subrack of the physical port that this interface is bound to. |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.4 | ColumnmplsIfSlot | read-only | current | The slot of the physical port that this interface is bound to. |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.5 | ColumnmplsIfTxPort | read-create | current | The transmitting physical port that this interface is bound to. |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.6 | ColumnmplsIfPortIndex | read-create | current | The index of the port or lag that this interface is bound to. |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.7 | ColumnmplsIfPortName | read-only | current | Name of the port or lag that this interface is bound to. |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.8 | ColumnmplsIfInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.9 | ColumnmplsIfAdminStatus | read-write | current | The administrative state of the MPLS interface. down - The interface is de-activated. up - The interface is activated. |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.10 | ColumnmplsIfIdentifier | read-create | current | A unique identifier for the MPLS interface. |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.11 | ColumnmplsIfNextHopMacAddress | read-write | current | The unicast or valid multicast (01:00:5E:90:00:00) MAC address used for sending MPLS packets on the interface. A configured next hop MAC Address on an interfac… |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.12 | ColumnmplsIfInterfaceMacAddress | read-write | current | The unicast MAC address used for receiving MPLS packets on the interface. If no interface MAC address is defined, the predefined MAC address for the physical p… |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.13 | ColumnmplsIfVlan | read-write | current | The backbone VLAN id used when transmitting and receiving MPLS packets on the interface. |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.14 | ColumnmplsIfRowStatus | read-create | current | Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the… |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.15 | ColumnmplsIfIfNo | read-create | current | The physical interface number of the multi-connector port. |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.16 | ColumnmplsIfResourceType | read-create | current | The type of resource the Mpls If is created on. |
| 1.3.6.1.4.1.8708.2.40.2.2.1.1.17 | ColumnmplsIfLagId | read-create | current | The identifier of the LAG for Mpls If. An empty string means no Mpls interface on LAG. |
| 1.3.6.1.4.1.8708.2.40.2.3 | NodemplsXCList | |||
| 1.3.6.1.4.1.8708.2.40.2.3.1 | TablemplsXCTable | not-accessible | current | This table specifies information for associating in and out segments together in order to form a cross-connect. |
| 1.3.6.1.4.1.8708.2.40.2.3.1.1 | RowmplsXCEntry | not-accessible | current | An entry in the MPLS cross-connect list. There are two special cases for LERs: 1. LSPs originated at this LSR: These are represented by using the value zero fo… |
| 1.3.6.1.4.1.8708.2.40.2.3.1.1.1 | ColumnmplsXCIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.40.2.3.1.1.2 | ColumnmplsXCName | read-only | current | The management name of the entry, for example 'xc:1:2:myIdentifier', where the first number indicates subrack, the second slot number. 'myIdentifier' is the un… |
| 1.3.6.1.4.1.8708.2.40.2.3.1.1.3 | ColumnmplsXCInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.40.2.3.1.1.4 | ColumnmplsXCIdentifier | read-create | current | A unique identifier for the cross-connect object. |
| 1.3.6.1.4.1.8708.2.40.2.3.1.1.5 | ColumnmplsXCInSegmentIfIndex | read-create | current | Index of the incoming MPLS interface. The value zero indicates a special case (LER) outlined in the table description. |
| 1.3.6.1.4.1.8708.2.40.2.3.1.1.6 | ColumnmplsXCInSegmentIfName | read-create | current | Name of the incoming segment. |
| 1.3.6.1.4.1.8708.2.40.2.3.1.1.7 | ColumnmplsXCInSegmentLabel | read-create | current | The MPLS label for the incoming traffic. Actual label range is 16-1048575, 0-15 is reserved. |
| 1.3.6.1.4.1.8708.2.40.2.3.1.1.8 | ColumnmplsXCOutSegmentIfIndex | read-create | current | Index of the outgoing MPLS interface. The value zero indicates a special case (LER) outlined in the table description. |
| 1.3.6.1.4.1.8708.2.40.2.3.1.1.9 | ColumnmplsXCOutSegmentIfName | read-create | current | Name of the outgoing segment. |
| 1.3.6.1.4.1.8708.2.40.2.3.1.1.10 | ColumnmplsXCOutSegmentLabel | read-create | current | The MPLS label for the outgoing traffic. Actual label range is 16-1048575, 0-15 is reserved. |
| 1.3.6.1.4.1.8708.2.40.2.3.1.1.11 | ColumnmplsXCRowStatus | read-create | current | Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the… |
| 1.3.6.1.4.1.8708.2.40.2.4 | NodemplsTunnelList | |||
| 1.3.6.1.4.1.8708.2.40.2.4.1 | TablemplsTunnelTable | not-accessible | current | The MPLS tunnel list. |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1 | RowmplsTunnelEntry | not-accessible | current | An entry in the MPLS tunnel list. |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.1 | ColumnmplsTunnelIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.2 | ColumnmplsTunnelInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.3 | ColumnmplsTunnelIdentifier | read-create | current | Unique identifier used for referencing this object. |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.4 | ColumnmplsTunnelName | read-only | current | The management name of the entry, for example 'tunnel:1:2:id', where the first number indicates subrack, the second slot number and the id is the unique tunnel… |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.5 | ColumnmplsTunnelActiveLSP | read-create | current | ID of the associated LSP that is active, if exists. |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.6 | ColumnmplsTunnelActiveLspIndex | read-only | current | The index of the associated LSP that is active, if exists. |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.7 | ColumnmplsTunnelState | read-only | current | Indicates the state of the tunnel. down (1) up (2) unknown (3) |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.8 | ColumnmplsTunnelSrcNodeId | read-only | current | The ID of the source node, i.e. the node where this tunnel originates. Used for externally uniquely identifying the tunnel in the standardized format, '[Src Gl… |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.9 | ColumnmplsTunnelSrcTunnelId | read-write | current | The source node MPLS-TP tunnel ID of this tunnel. Used for externally uniquely identifying the tunnel in the standardized format, '[Src Global ID]:[Src Node ID… |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.10 | ColumnmplsTunnelDestNodeId | read-write | current | The ID of the destination node, i.e. the node where this tunnel terminates. Used for externally uniquely identifying the tunnel in the standardized format, '[S… |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.11 | ColumnmplsTunnelDestTunnelId | read-write | current | The destination node MPLS-TP tunnel ID of the tunnel. Used for externally uniquely identifying the tunnel in the standardized format, '[Src global ID]:[Src nod… |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.12 | ColumnmplsTunnelExtId | read-only | current | The global ID of the tunnel, used for externally uniquely identifying the tunnel in the standardized format, '[Src global ID]:[Src node ID]:[Src tunnel ID]- [D… |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.13 | ColumnmplsTunnelAssociateLSP | read-only | current | Internal command for mapping a new LSP to the tunnel. The first LSP associated to the tunnel will be the primary path and the additional LSPs will be the prote… |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.14 | ColumnmplsTunnelRowStatus | read-create | current | Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the… |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.15 | ColumnmplsTunnelLinearProtection | read-create | current | The linear protection profile applied to the tunnel. Protection state coordination (PSC) protocol is used for linear protection. |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.16 | ColumnmplsTunnelProtectionState | read-only | current | Status of the linear protection that applied to the tunnel fullyworking (1) degraded (2) failed (3) and working path unknown (4) |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.17 | ColumnmplsTunnelAssociateLinearProt | read-only | current | Internal command for create and associate a PSC (Protection State Coordination) protocol for linear protection of the tunnel. Only supported 1:1 protection arc… |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.18 | ColumnmplsTunnelGlobalId | read-only | current | This object allows the administrator to assign a unique operator identifier also called MPLS-TP Global Identifier. The Global Identifier can contain the 2-octe… |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.19 | ColumnmplsTunnelDestGlobalId | read-write | current | This object allows the administrator to assign a unique operator identifier also called MPLS-TP Global Identifier. The Global Identifier can contain the 2-octe… |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.20 | ColumnmplsTunnelWorkingLSP | read-only | current | Identifier of the working path of the linear protection. |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.21 | ColumnmplsTunnelProtectionLSP | read-only | current | Identifier of the protection path of the linear protection. |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.22 | ColumnmplsTunnelReservedBW | read-write | current | Bandwidth reserved by the tunnel. Default value is 0 and indicates that no bandwidth has been allocated by the tunnel. |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.23 | ColumnmplsTunnelBookedBW | read-only | current | The total amount of bandwidth booked by pseudowires in the tunnel. |
| 1.3.6.1.4.1.8708.2.40.2.4.1.1.24 | ColumnmplsTunnelDescr | read-write | current | User configurable label. |
| 1.3.6.1.4.1.8708.2.40.2.5 | NodemplsNodeList | |||
| 1.3.6.1.4.1.8708.2.40.2.5.1 | TablemplsNodeTable | not-accessible | current | The MPLS node list. Each individual board that supports MPLS node is considered a MPLS node. |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1 | RowmplsNodeEntry | not-accessible | current | An entry in the MPLS node list. |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.1 | ColumnmplsNodeIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.2 | ColumnmplsNodeName | read-only | current | The management name of the interface, for example 'node:1:2', where the first number indicates subrack, the second slot number. |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.3 | ColumnmplsNodeSubrack | read-only | current | The subrack that this MPLS node belongs to. |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.4 | ColumnmplsNodeSlot | read-only | current | The slot that this MPLS node belongs to. |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.5 | ColumnmplsNodeIccIdStr | read-write | current | Unique code assigned to the network operator or service provider maintained by ITU-T. The ITU carrier code used to form a globally unique node ID for non IP en… |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.6 | ColumnmplsNodeIdNum | read-write | current | Unique node ID / router ID assigned with in the scope of the network of the operator / service provider, defined by the ICC ID. This value is unique and only v… |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.7 | ColumnmplsNodeCreateXC | read-only | current | Internal command for creating a XC entry. In-segment name - Name of the incoming segment. In-segment label - The MPLS label for the incoming traffic. Out-segme… |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.8 | ColumnmplsNodeCreateTunnel | read-only | current | Identifier - Unique tunnel ID used when referencing the tunnel within the node. MPLS-TP ID - Set the standard MPLS-TP ID for the tunnel on the format: '<Source… |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.9 | ColumnmplsNodeCreateLsp | read-only | current | Internal command for creating a bidirectional LSP entry. Identifier - Unique LSP ID used when referencing the LSP within the node. Role - Defines whether the L… |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.10 | ColumnmplsNodeCreatePw | read-only | current | Pseudowire ID - Unique pseudowire ID used when referencing the pseudowire within the node. Pseudowire type - Edge pseudowire connects to a singel tunnel while … |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.11 | ColumnmplsNodeCreateIf | read-only | current | Internal command for creating an interface. Identifier - Unique MPLS interface ID used when referencing the interface within the node. Admin Status - Defines w… |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.12 | ColumnmplsNodeLinearProtMode | read-write | current | The mode of the protection domain, configured for all MPLS linear protection service on the board. nonRevertive (1) revertive (2) |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.13 | ColumnmplsNodeLinearProtWtrTimer | read-write | current | The wait-to-restore (WTR) timer configured for all MPLS linear protection service on the board. A WTR timer is used to delay reversion to Normal state when rec… |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.14 | ColumnmplsNodeLPContMsgInterval | read-write | current | In linear protection domain, the control message is transmitted over the protection path only. Subsequent messages are continuously transmitted to verify that … |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.15 | ColumnmplsNodeLPRapidMsgInterval | read-write | current | In linear protection domain, when the state of the protection domain is changed, three control messages shall be transmitted as quickly as possible to allow fo… |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.16 | ColumnmplsNodeGlobalId | read-write | current | This object allows the administrator to assign a unique operator identifier also called MPLS-TP Global Identifier. The Global Identifier can contain the 2-octe… |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.17 | ColumnmplsNodeCreateMsPw | read-only | current | Internal command for creating a multi-segment pseudowire. Identifier - Unique pseudowire ID used when referencing the pseudowire within the node. East outlabel… |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.18 | ColumnmplsNodeCreateLsp2 | read-only | current | Internal command for creating a bidirectional LSP entry. Identifier - Unique LSP ID used when referencing the LSP within the node. Role - Defines whether the L… |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.19 | ColumnmplsNodeCreateTunnelAdvanced | read-only | current | Identifier - Unique tunnel ID used when referencing the tunnel within the node. MPLS-TP ID - Set the standard MPLS-TP ID for the tunnel on the format: '<Source… |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.20 | ColumnmplsNodeCreateLspAdvanced | read-only | current | Internal command for creating a bidirectional LSP entry. Identifier - Unique LSP ID used when referencing the LSP within the node. Role - Defines whether the L… |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.21 | ColumnmplsNodeCreatePwGeneric | read-only | current | Internal command for creating a bidirectional LSP entry. Identifier - Unique LSP ID used when referencing the LSP within the node. |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.22 | ColumnmplsNodeCreatePwMpls | read-only | current | Internal command for creating a bidirectional LSP entry. Identifier - Unique LSP ID used when referencing the LSP within the node. |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.23 | ColumnmplsNodeCreatePwEnet | read-only | current | Internal command for creating a bidirectional LSP entry. Identifier - Unique LSP ID used when referencing the LSP within the node. |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.24 | ColumnmplsNodeCreateBfdTemplate | read-only | current | Internal command for creating a new BFD template. Identifier - The unique identifier for the template. Tx Interval - Minimum interval for sending BFD control p… |
| 1.3.6.1.4.1.8708.2.40.2.5.1.1.25 | ColumnmplsNodeCreateXCAdvanced | read-only | current | Internal command for creating a XC entry. In-segment name - Name of the incoming segment. In-segment label - The MPLS label for the incoming traffic. Out-segme… |
| 1.3.6.1.4.1.8708.2.40.2.6 | NodemplsLspList | |||
| 1.3.6.1.4.1.8708.2.40.2.6.1 | TablemplsLspTable | not-accessible | current | The MPLS Label Switched Path group list. Each entry in the table represent a bidirectional LSP. |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1 | RowmplsLspEntry | not-accessible | current | An entry in the MPLS LSP list. |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.1 | ColumnmplsLspIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.2 | ColumnmplsLspName | read-only | current | The management name of the entry, for example 'lsp:1:2:identifier', where the first number indicates subrack, the second slot number and the third is the uniqu… |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.3 | ColumnmplsLspInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.4 | ColumnmplsLspIdentifier | read-create | current | A unique identifier for the LSP object. |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.5 | ColumnmplsLspState | read-only | current | The indicated state of the LSP. up - The LSP is active and the connection has been verified. down - The LSP is not active, or the connection has not been verif… |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.6 | ColumnmplsLspRole | read-create | current | The entry signifies the role the LSP entry represents. edge - The LSP is originated and terminated in the node, which is considered a Label edge router, LER. t… |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.7 | ColumnmplsLspForwardXCId | read-create | current | The identifier for the outgoing XC entry in a LER. For a LSR transit LSP, the terms forward and reverse have no significance, and the forward XC indicates one … |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.8 | ColumnmplsLspReverseXCId | read-create | current | The identifier for the incoming XC entry in a LER. For a LSR transit LSP, the terms forward and reverse have no significance, and the reverse XC indicates one … |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.9 | ColumnmplsLspPriority | read-create | current | The entry signifies the priority of the LSP within the tunnel. 1 - Highest priority, working LSP in a revertive protected tunnel with multiple LSPs. 2 - Second… |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.10 | ColumnmplsLspSrcNodeId | read-create | current | The ID of the source node of the LSP, i.e. the node where this LSP originates. Used for externally uniquely identifying the LSP in the standardized format, '[S… |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.11 | ColumnmplsLspDestNodeId | read-create | current | The ID of the destination node of the LSP, i.e. the node where this LSP terminates. Used for externally uniquely identifying the LSP in the standardized format… |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.12 | ColumnmplsLspSrcTunnelId | read-create | current | The source node MPLS-TP tunnel ID of the tunnel that this LSP is a part of. Used for externally uniquely identifying the LSP in the standardized format. '[Src … |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.13 | ColumnmplsLspDestTunnelId | read-create | current | The destination node MPLS-TP tunnel ID of the tunnel that this LSP is a part of. Used for externally uniquely identifying the LSP in the standardized format, '… |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.14 | ColumnmplsLspLspId | read-write | current | The ID of the LSP, used for externally uniquely identifying the LSP in the standardized format, '[Src Global ID]:[Src Node ID]:[Src Tunnel ID]:[Src LSP ID]- [D… |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.15 | ColumnmplsLspExtId | read-only | current | The ID string of the LSP, used for externally uniquely identifying the LSP in the standardized format, '[Src Global ID]:[Src Node ID]:[Src Tunnel ID]:[Src LSP … |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.16 | ColumnmplsLspIntTunnelId | read-create | current | The Internal ID of the MPLS-TP tunnel that the LSP is a part of. This entry is used for internal cross-reference between tunnels and LSPs. |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.17 | ColumnmplsLspRowStatus | read-create | current | Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the… |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.18 | ColumnmplsLspBFDSession | read-create | current | The Internal ID of the BFD session the LSP that is monitoring the LSP data connections. This entry is used for internal cross-reference between BFD sessions an… |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.19 | ColumnmplsLspCreateBFD | read-only | current | Internal command to create a BFD session object and connect it to an LSP. BFD Template - Select preferred BFD template to setup timing of BFD session. Admin st… |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.20 | ColumnmplsLspTrafficClass | read-create | deprecated | The entry signifies the Traffic Class. |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.21 | ColumnmplsLspGlobalId | read-create | current | This object allows the administrator to assign a unique operator identifier also called MPLS-TP Global Identifier. The Global Identifier can contain the 2-octe… |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.22 | ColumnmplsLspDestGlobalId | read-create | current | This object allows the administrator to assign a unique operator identifier also called MPLS-TP Global Identifier. The Global Identifier can contain the 2-octe… |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.23 | ColumnmplsLspReservedBW | read-write | current | Bandwidth reserved by the LSP. Default value is 0 and inidcates that no bandwidth has been allocated by the LSP. |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.24 | ColumnmplsLspDescr | read-write | current | User configurable label. |
| 1.3.6.1.4.1.8708.2.40.2.6.1.1.25 | ColumnmplsLspCreateBFDAdvanced | read-only | current | Internal command to create a BFD session object and connect it to an LSP. BFD Template - Select preferred BFD template to setup timing of BFD session. Admin st… |
| 1.3.6.1.4.1.8708.2.40.2.7 | NodemplsTnlXLspList | |||
| 1.3.6.1.4.1.8708.2.40.2.7.1 | TablemplsTnlXLspTable | not-accessible | current | The MPLS tunnel to LSP cross reference group list. |
| 1.3.6.1.4.1.8708.2.40.2.7.1.1 | RowmplsTnlXLspEntry | not-accessible | current | An entry in the MPLS tunnel LSP cross reference list. |
| 1.3.6.1.4.1.8708.2.40.2.7.1.1.1 | ColumnmplsTnlXLspIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.40.2.7.1.1.2 | ColumnmplsTnlXLspName | read-only | current | The management name of the interface, for example 'tnlXLsp:1:2', where the first number indicates subrack, the second slot number. |
| 1.3.6.1.4.1.8708.2.40.2.7.1.1.3 | ColumnmplsTnlXLspInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.40.2.7.1.1.4 | ColumnmplsTnlXLspTunnelId | read-create | current | Tunnel ID of this cross reference entry. |
| 1.3.6.1.4.1.8708.2.40.2.7.1.1.5 | ColumnmplsTnlXLspLspId | read-create | current | LSP ID of this cross reference entry. |
| 1.3.6.1.4.1.8708.2.40.2.7.1.1.6 | ColumnmplsTnlXLspRowStatus | read-create | current | Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MplsIdentifier | Unsigned32 (0..65535) | current | MPLS identifier type, 16-bit integer. |