LUM-MPLSOAM-MIB
64 objects
MPLS OAM Management Information Base The tables contained in this MIB are: (1) Bidirectional forwarding table. BFD is a protocol intended to detect faults in the bidirectional path between two forwarding engines. It operates independently of media, data protocols, and routing protocols. (2) Template for bidirectional forwarding. Templates used for setting up a BFD sessions.
Imported Objects
| LUM-REG | lumModules lumMplsOamMIB |
| LUM-TC | CommandString FaultStatus MgmtNameString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.44 | IdentitylumMplsOamMIBModule | MPLS OAM Management Information Base The tables contained in this MIB are: (1) Bidirectional forwarding table. BFD is a protocol intended to detect faults in t… | ||
| 1.3.6.1.4.1.8708.2.44.1 | NodelumMplsOamConfs | |||
| 1.3.6.1.4.1.8708.2.44.1.1 | NodelumMplsOamGroups | |||
| 1.3.6.1.4.1.8708.2.44.1.1.1 | GroupmplsIOamGeneralGroupV1 | current | The general objects. | |
| 1.3.6.1.4.1.8708.2.44.1.1.2 | GroupmplsBfdSessGroupV1 | deprecated | The MPLS OAM BFD Session objects (R19.0). | |
| 1.3.6.1.4.1.8708.2.44.1.1.3 | GroupmplsBfdTemplateGroupV1 | current | The MPLS OAM BFD template objects (R19.0). | |
| 1.3.6.1.4.1.8708.2.44.1.1.4 | GroupmplsBfdSessGroupV2 | current | The MPLS OAM BFD Session objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.44.1.2 | NodelumMplsOamCompl | |||
| 1.3.6.1.4.1.8708.2.44.1.2.1 | CompliancelumMplsBasicComplV1 | deprecated | Basic implementation requirements for the MPLS OAM MIB. (R19) | |
| 1.3.6.1.4.1.8708.2.44.1.2.2 | CompliancelumMplsBasicComplV2 | current | Basic implementation requirements for the MPLS OAM MIB. (R20) | |
| 1.3.6.1.4.1.8708.2.44.2 | NodelumMplsOamMIBObjects | |||
| 1.3.6.1.4.1.8708.2.44.2.1 | NodemplsOamGeneral | |||
| 1.3.6.1.4.1.8708.2.44.2.1.1 | ScalarmplsOamGeneralLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.44.2.1.2 | ScalarmplsOamGeneralStateLastChangeTime | read-only | current | The time when the state of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.44.2.1.3 | ScalarmplsOamGeneralmplsOamBfdSessTableSize | read-only | current | Size of BFD session table. |
| 1.3.6.1.4.1.8708.2.44.2.1.4 | ScalarmplsOamGeneralmplsOamBfdTemplateTableSize | read-only | current | Size of BFD template table. |
| 1.3.6.1.4.1.8708.2.44.2.2 | NodemplsOamBfdSess | |||
| 1.3.6.1.4.1.8708.2.44.2.2.1 | TablemplsOamBfdSessTable | not-accessible | current | The BFD Session Table describes the BFD sessions. |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1 | RowmplsOamBfdSessEntry | not-accessible | current | The BFD Session Entry describes a single BFD session. |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.1 | ColumnmplsOamBfdSessIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.2 | ColumnmplsOamBfdSessInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.3 | ColumnmplsOamBfdSessName | read-only | current | The management name of the BFD session, for example 'bfdSess:1:2:myIdentifier', where the first number indicates subrack and the second slot number. For LSPs '… |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.4 | ColumnmplsOamBfdSessAdminStatus | read-write | current | A transition from 'down' to 'up' will start the BFD state machine for the session. The state machine will have an initial state of down. A transition from 'up'… |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.5 | ColumnmplsOamBfdSessState | read-only | current | BFD session state. none - Locally indicated state of the remote BFD session before connection is made. adminDown - State the BFD session is in when the request… |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.6 | ColumnmplsOamBfdSessRemoteState | read-only | current | BFD session state. none - Locally indicated state of the remote BFD session before connection is made. adminDown - State the BFD session is in when the request… |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.7 | ColumnmplsOamBfdSessDiag | read-only | current | A diagnostic code specifying the local systems reason for the last transition of the session from up to some other state. noDiagnostic - Normal state of sessio… |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.8 | ColumnmplsOamBfdSessRemoteDiag | read-only | current | A diagnostic code specifying the remote systems reason for the last transition of the session from up to some other state. noDiagnostic - Normal state of sessi… |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.9 | ColumnmplsOamBfdSessNegotiatedTxInterval | read-only | current | This object specifies the negotiated interval that the local system is transmitting BFD Control packets. Display unit is milliseconds but the storage type is m… |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.10 | ColumnmplsOamBfdSessNegotiatedRxInterval | read-only | current | This object specifies the negotiated interval that the local system is receiving BFD Control packets. Display unit is milliseconds but the storage type is micr… |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.11 | ColumnmplsOamBfdSessMonitoringPath | read-create | current | Name of the path the BFD object is monitoring. |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.12 | ColumnmplsOamBfdSessMonitoringPathType | read-create | current | This object indicates the type of path being monitored by this BFD session entry, LSP, PW, or MEP. |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.13 | ColumnmplsOamBfdSessMonitoringPathIndex | read-only | current | Index of the path of the BFD object is monitoring. |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.14 | ColumnmplsOamBfdSessTemplate | read-create | current | ID of the associated LSP that is active, if exists. |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.15 | ColumnmplsOamBfdSessTemplateIndex | read-only | current | The index of the associated LSP that is active, if exists. |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.16 | ColumnmplsOamBfdSessSourceMepId | read-only | current | Actual configuration of source MEP ID for current BFD session received from traffic unit. The identifier of the tunnel and LSP. '[Global ID]:[Node ID]:[Tunnel … |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.17 | ColumnmplsOamBfdSessTargetMepId | read-only | current | Actual configuration of target MEP ID for current BFD session received from traffic unit. The identifier of the tunnel and LSP. '[Global ID]:[Node ID]:[Tunnel … |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.18 | ColumnmplsOamBfdSessRcvTargetMepId | read-only | current | Actual configuration of target MEP ID for current BFD session received from traffic unit of corresponding BFD session via CV packages.The identifier of the tun… |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.19 | ColumnmplsOamBfdSessMepNotConfigured | read-only | current | MEP-ID for tunnel, node or LSP are set to zero, source or remote. The CV messages will be transmitted but the connectivity verification will have degraded func… |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.20 | ColumnmplsOamBfdSessLocalNotConnected | read-only | current | No packages received from remote BFD session. |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.21 | ColumnmplsOamBfdSessLocalMisConnectivity | read-only | current | Invalid MEP-ID-TLV received by local session. MPLS-TP MEP-ID-TLV does from CV messages does not match local configuration. BFD session is connected to wrong pe… |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.22 | ColumnmplsOamBfdSessLocalTimerExpired | read-only | current | Local BFD session has not received valid CC packages for an interval of more than detection multiplier times the negotiated RX interval. Check for layer 1 prob… |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.23 | ColumnmplsOamBfdSessRemoteMisConnectivity | read-only | current | The local BFD session has received an indication that the peer BFD session is in down state due to an invalid received MPLS-TP MEP-ID-TLV. Check local source a… |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.24 | ColumnmplsOamBfdSessRemoteTimerExpired | read-only | current | Remote time-out for CC packages. |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.25 | ColumnmplsOamBfdSessRemoteAdminDown | read-only | current | The local BFD session has received an indication that the peer BFD session is in administrative down state. Check peer BFD session |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.26 | ColumnmplsOamBfdSessRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.27 | ColumnmplsOamBfdSessDesiredMinTxInterval | read-only | current | This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0… |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.28 | ColumnmplsOamBfdSessReqMinRxInterval | read-only | current | This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(… |
| 1.3.6.1.4.1.8708.2.44.2.2.1.1.29 | ColumnmplsOamBfdSessTrafficClass | read-write | current | The entry signifies the Traffic Class used on the traffic generated by the BFD session CV and CC messages. |
| 1.3.6.1.4.1.8708.2.44.2.3 | NodemplsOamBfdTemplate | |||
| 1.3.6.1.4.1.8708.2.44.2.3.2 | TablemplsOamBfdTemplateTable | not-accessible | current | The BFD template table describes the common templates for BFD sessions. |
| 1.3.6.1.4.1.8708.2.44.2.3.2.1 | RowmplsOamBfdTemplateEntry | not-accessible | current | The BFD template entry describes the common templates for BFD sessions. |
| 1.3.6.1.4.1.8708.2.44.2.3.2.1.1 | ColumnmplsOamBfdTemplateIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.44.2.3.2.1.2 | ColumnmplsOamBfdTemplateInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.44.2.3.2.1.3 | ColumnmplsOamBfdTemplateName | read-only | current | The management name of the BFD session, for example 'bfdSess:1:2:myIdentifier', where the first number indicates subrack and the second slot number. |
| 1.3.6.1.4.1.8708.2.44.2.3.2.1.4 | ColumnmplsOamBfdTemplateIdentifier | read-create | current | A unique identifier for template object. |
| 1.3.6.1.4.1.8708.2.44.2.3.2.1.5 | ColumnmplsOamBfdTemplateDesiredMinTxInterval | read-create | current | This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0… |
| 1.3.6.1.4.1.8708.2.44.2.3.2.1.6 | ColumnmplsOamBfdTemplateDetectMult | read-create | current | This object specifies the 'detect time' multiplier for raising an alarm. Number of loss BFD CC packets. This parameter is not configurable. |
| 1.3.6.1.4.1.8708.2.44.2.3.2.1.7 | ColumnmplsOamBfdTemplateReqMinRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(… |
| 1.3.6.1.4.1.8708.2.44.2.3.2.1.8 | ColumnmplsOamBfdTemplateCreateNewTemplate | read-only | current | Internal command for creating a new BFD template. Identifier - The unique identifier for the template. Tx Interval - Minimum interval for sending BFD control p… |
| 1.3.6.1.4.1.8708.2.44.2.3.2.1.9 | ColumnmplsOamBfdTemplateRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row c… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BfdDiagTC | INTEGER { noDiagnostic(0), controlDetectionTimeExpired(1), echoFunctionFailed(2), neighborSignaledSessionDown(3), forwardingPlaneReset(4), pathDown(5), concatenatedPathDown(6), administrativelyDown(7), reverseConcatenatedPathDown(8), misconnectionDefect(9) } | current | A common BFD diagnostic code. |
| BfdIntervalTC | Unsigned32 (0..1000000) | current | The BFD interval in microseconds. |
| BfdMultiplierTC | Unsigned32 (1..255) | current | The BFD failure detection multiplier. Number of failed/missed messages before an alarm. |
| BfdSessStateTC | INTEGER { none(0), adminDown(1), down(2), init(3), up(4), failing(5) } | current | BFD session state. State failing(5) is only applicable if corresponding session is running in BFD version 0. |