MIB Viewer

LUM-MULTIRATE-MIB

136 objects
The multi-bitrate client interface MIB. - General - Multi bit-rate client interfaces
Imported Objects
LUM-REGlumModules lumMultirateMIB
LUM-TCBoardOrInterfaceAdminStatus BoardOrInterfaceOperStatus CommandString FaultStatus LambdaFrequency MgmtNameString ObjectProperty PortNumber SignalFormat SlotNumber SubrackNumber TrxMedia
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIGauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString TestAndIncr
OIDNameAccessStatusDescription
1.3.6.1.4.1.8708.1.1.13IdentitylumMultirateMIBModuleThe multi-bitrate client interface MIB. - General - Multi bit-rate client interfaces
1.3.6.1.4.1.8708.2.12.1NodelumMultirateConfs
1.3.6.1.4.1.8708.2.12.1.1NodelumMultirateGroups
1.3.6.1.4.1.8708.2.12.1.1.1GroupmrtGeneralGroupdeprecatedThe general objects.
1.3.6.1.4.1.8708.2.12.1.1.2GroupmrtIfGroupdeprecatedThe multirate interface objects.
1.3.6.1.4.1.8708.2.12.1.1.3GroupmrtGeneralGroupV2deprecatedThe multirate general objects v2.
1.3.6.1.4.1.8708.2.12.1.1.4GroupmrtIfGroupV2deprecatedThe interface objects V2.
1.3.6.1.4.1.8708.2.12.1.1.5GroupmrtIfGroupV3deprecatedThe interface objects V3.
1.3.6.1.4.1.8708.2.12.1.1.6GroupmrtIfGroupV4deprecatedThe interface objects V4.
1.3.6.1.4.1.8708.2.12.1.1.7GroupmrtNotificationGroupdeprecatedThe multirate notifications.
1.3.6.1.4.1.8708.2.12.1.1.8GroupmrtGeneralGroupV3deprecatedThe multirate general objects v3.
1.3.6.1.4.1.8708.2.12.1.1.9GroupmrtIfGroupV5deprecatedThe interface objects V5.
1.3.6.1.4.1.8708.2.12.1.1.10GroupmrtIfGroupV6currentThe interface objects V6.
1.3.6.1.4.1.8708.2.12.1.1.11GroupmrtIfGroupV7deprecatedThe interface objects V7.
1.3.6.1.4.1.8708.2.12.1.1.12GroupmrtIfGroupV8deprecatedThe interface objects V8.
1.3.6.1.4.1.8708.2.12.1.1.13GroupmrtIfGroupV9deprecatedThe interface objects V9.
1.3.6.1.4.1.8708.2.12.1.1.14GroupmrtIfGroupV10deprecatedThe interface objects V10.
1.3.6.1.4.1.8708.2.12.1.1.15GroupmrtNotificationGroupV2currentThe multirate notifications.
1.3.6.1.4.1.8708.2.12.1.1.16GroupmrtIfGroupV11deprecatedThe interface objects V11 (2.2).
1.3.6.1.4.1.8708.2.12.1.1.17GroupmrtIfGroupV12deprecatedThe interface objects V12 (3.1).
1.3.6.1.4.1.8708.2.12.1.1.18GroupmrtGeneralGroupV4currentThe multirate general objects V4 (3.1).
1.3.6.1.4.1.8708.2.12.1.1.19GroupmrtIfGroupV13deprecatedThe interface objects V13 (3.2).
1.3.6.1.4.1.8708.2.12.1.1.20GroupmrtIfGroupV14deprecatedThe interface objects V14 (4.0).
1.3.6.1.4.1.8708.2.12.1.1.21GroupmrtIfGroupV15deprecatedThe interface objects V15 (6.0).
1.3.6.1.4.1.8708.2.12.1.1.22GroupmrtIfGroupV16currentThe interface objects V16 (7.0).
1.3.6.1.4.1.8708.2.12.1.2NodelumMultirateCompl
1.3.6.1.4.1.8708.2.12.1.2.1CompliancelumMultirateBasicComplV1deprecatedBasic implementation requirements for the multirate MIB V1.
1.3.6.1.4.1.8708.2.12.1.2.2CompliancelumMultirateBasicComplV2deprecatedBasic implementation requirements for the multirate MIB V2.
1.3.6.1.4.1.8708.2.12.1.2.3CompliancelumMultirateBasicComplV3deprecatedBasic implementation requirements for the multirate MIB V3.
1.3.6.1.4.1.8708.2.12.1.2.4CompliancelumMultirateBasicComplV4deprecatedBasic implementation requirements for the multirate MIB V4.
1.3.6.1.4.1.8708.2.12.1.2.5CompliancelumMultirateBasicComplV5deprecatedBasic implementation requirements for the multirate MIB V5.
1.3.6.1.4.1.8708.2.12.1.2.6CompliancelumMultirateBasicComplV6deprecatedBasic implementation requirements for the multirate MIB V6.
1.3.6.1.4.1.8708.2.12.1.2.7CompliancelumMultirateBasicComplV7deprecatedBasic implementation requirements for the multirate MIB V7.
1.3.6.1.4.1.8708.2.12.1.2.8CompliancelumMultirateBasicComplV8deprecatedBasic implementation requirements for the multirate MIB V8.
1.3.6.1.4.1.8708.2.12.1.2.9CompliancelumMultirateBasicComplV9deprecatedBasic implementation requirements for the multirate MIB V9.
1.3.6.1.4.1.8708.2.12.1.2.10CompliancelumMultirateBasicComplV10deprecatedBasic implementation requirements for the multirate MIB V10.
1.3.6.1.4.1.8708.2.12.1.2.11CompliancelumMultirateBasicComplV11deprecatedBasic implementation requirements for the multirate MIB V11.
1.3.6.1.4.1.8708.2.12.1.2.12CompliancelumMultirateBasicComplV12deprecatedBasic implementation requirements for the multirate MIB V12.
1.3.6.1.4.1.8708.2.12.1.2.13CompliancelumMultirateBasicComplV13deprecatedBasic implementation requirements for the multirate MIB V13 (2.2).
1.3.6.1.4.1.8708.2.12.1.2.14CompliancelumMultirateBasicComplV14deprecatedBasic implementation requirements for the multirate MIB V14 (3.1).
1.3.6.1.4.1.8708.2.12.1.2.15CompliancelumMultirateBasicComplV15deprecatedBasic implementation requirements for the multirate MIB V15 (3.2).
1.3.6.1.4.1.8708.2.12.1.2.16CompliancelumMultirateBasicComplV16deprecatedBasic implementation requirements for the multirate MIB V16 (4.0).
1.3.6.1.4.1.8708.2.12.1.2.17CompliancelumMultirateBasicComplV17deprecatedBasic implementation requirements for the multirate MIB V17 (6.0).
1.3.6.1.4.1.8708.2.12.1.2.18CompliancelumMultirateBasicComplV18deprecatedBasic implementation requirements for the multirate MIB V18 (7.0).
1.3.6.1.4.1.8708.2.12.1.2.19CompliancelumMultirateBasicComplV19currentBasic implementation requirements for the multirate MIB V19 (17.0).
1.3.6.1.4.1.8708.2.12.2NodelumMultirateMIBObjects
1.3.6.1.4.1.8708.2.12.2.1NodemrtGeneral
1.3.6.1.4.1.8708.2.12.2.1.1ScalarmrtGeneralTestAndIncrread-writecurrentProtection against simultaneous access from multiple managers. See SNMPv2-TC.
1.3.6.1.4.1.8708.2.12.2.1.2ScalarmrtGeneralMibSpecVersionread-writecurrentThe MIB specification version.
1.3.6.1.4.1.8708.2.12.2.1.3ScalarmrtGeneralMibImplVersionread-writecurrentThe MIB implementation version.
1.3.6.1.4.1.8708.2.12.2.1.4ScalarmrtGeneralLastChangeTimeread-onlycurrentThe time when the configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.12.2.1.5ScalarmrtGeneralStateLastChangeTimeread-onlycurrentThe time when the state of the MIB was last changed.
1.3.6.1.4.1.8708.2.12.2.1.6ScalarmrtGeneralMrtIfTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.12.2.2NodemrtIfList
1.3.6.1.4.1.8708.2.12.2.2.1TablemrtIfTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.12.2.2.1.1RowmrtIfEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.12.2.2.1.1.1ColumnmrtIfIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.12.2.2.1.1.2ColumnmrtIfNameread-onlycurrentThe management name of the interface, for example 'mrti1:2:1', where the first number indicates sub-rack, the second slot number and the third is the port numb…
1.3.6.1.4.1.8708.2.12.2.2.1.1.3ColumnmrtIfDescrread-writecurrentUser configurable label. This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.12.2.2.1.1.4ColumnmrtIfSubrackread-onlycurrentThe number of the subrack where the interface is located.
1.3.6.1.4.1.8708.2.12.2.2.1.1.5ColumnmrtIfSlotread-onlycurrentThe number of the slot where the interface is located.
1.3.6.1.4.1.8708.2.12.2.2.1.1.6ColumnmrtIfTxPortread-onlycurrentThe number of the port where the TX-side of the interface is located.
1.3.6.1.4.1.8708.2.12.2.2.1.1.7ColumnmrtIfRxPortread-onlycurrentThe number of the port where the RX-side of the interface is located.
1.3.6.1.4.1.8708.2.12.2.2.1.1.8ColumnmrtIfInvPhysIndexOrZeroread-onlycurrentThe row in the invPhysTable for this interface. Set to 0 if not known.
1.3.6.1.4.1.8708.2.12.2.2.1.1.9ColumnmrtIfFormatread-createcurrentThe expected signal format. The default value is board dependent. For information about the default value for this particular board, please refer to the user m…
1.3.6.1.4.1.8708.2.12.2.2.1.1.10ColumnmrtIfHighSpeedread-createcurrentThe expected signal bit rate in units of 1,000,000 bits (Mb) per second. If this object reports a value of 'n' then the speed of the interface is somewhere in …
1.3.6.1.4.1.8708.2.12.2.2.1.1.11ColumnmrtIfHighSpeedMinread-onlycurrentThe minmum speed in units of 1,000,000 bits (Mb) per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of…
1.3.6.1.4.1.8708.2.12.2.2.1.1.12ColumnmrtIfHighSpeedMaxread-onlycurrentThe maximum speed in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-…
1.3.6.1.4.1.8708.2.12.2.2.1.1.13ColumnmrtIfPowerLevelread-onlycurrentThe received power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.12.2.2.1.1.14ColumnmrtIfPowerLevelHighThresholdread-writecurrentThe upper threshold for received power level in units of 0.1 dBm. Note: Depending on the type of board and interface the value range may vary. The 'stm4' and '…
1.3.6.1.4.1.8708.2.12.2.2.1.1.15ColumnmrtIfPowerLevelLowThresholdread-writecurrentThe lower threshold for received power level in units of 0.1 dBm. Note: Depending on the type of board and interface the value range may vary. The 'stm4' and '…
1.3.6.1.4.1.8708.2.12.2.2.1.1.16ColumnmrtIfLaserStatusread-onlycurrentThe operational state of the laser. off - The laser is turned off. on - The laser is turned on.
1.3.6.1.4.1.8708.2.12.2.2.1.1.17ColumnmrtIfAdminStatusread-writecurrentThe administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended f…
1.3.6.1.4.1.8708.2.12.2.2.1.1.18ColumnmrtIfOperStatusread-onlycurrentThe operational state for the interface. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventi…
1.3.6.1.4.1.8708.2.12.2.2.1.1.19ColumnmrtIfLossOfSignalread-onlycurrentLoss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication.
1.3.6.1.4.1.8708.2.12.2.2.1.1.20ColumnmrtIfReceivedPowerHighread-onlycurrentReceived power level is too high. Applicable for all signal formats. A: The received power level exceeds the the built-in overload threshold. D: The received p…
1.3.6.1.4.1.8708.2.12.2.2.1.1.21ColumnmrtIfReceivedPowerLowread-onlycurrentReceived power level low threshold exceeded. Applicable for all signal formats. A: The received power level is below the associated threshold. D: The received …
1.3.6.1.4.1.8708.2.12.2.2.1.1.22ColumnmrtIfLaserBiasHighread-onlycurrentLaser bias high threshold exceeded. A: The laser bias current exceeds the associated threshold. D: The laser bias current is 0.5 mA below the associated thresh…
1.3.6.1.4.1.8708.2.12.2.2.1.1.23ColumnmrtIfErroredSecondsread-onlydeprecatedNote: This attribute is deprecated! Errored seconds threshold exceeded. A: The number of errored seconds (ES) during a period exceeds the associated threshold.…
1.3.6.1.4.1.8708.2.12.2.2.1.1.24ColumnmrtIfSeverelyErroredSecondsread-onlydeprecatedNote: This attribute is deprecated! Severely errored seconds (SES) threshold exceeded. A: The number of severely errored seconds during a period exceeds the as…
1.3.6.1.4.1.8708.2.12.2.2.1.1.25ColumnmrtIfBackgroundBlockErrorsread-onlydeprecatedNote: This attribute is deprecated! Background block errors (BBE) threshold exceeded. A: The number of errors during a period exceeds the associated threshold.…
1.3.6.1.4.1.8708.2.12.2.2.1.1.26ColumnmrtIfUnavailableSecondsread-onlydeprecatedNote: This attribute is deprecated! Unavailable seconds (UAS) threshold exceeded. A: The number of unavailable seconds during a period exceeds the associated t…
1.3.6.1.4.1.8708.2.12.2.2.1.1.27ColumnmrtIfLossOfFrameread-onlycurrentLoss of frame. Applicable for SDH/Sonet signal formats. A: SDH frame can not be located. D: SDH frame is located.
1.3.6.1.4.1.8708.2.12.2.2.1.1.28ColumnmrtIfMsAlarmIndicationSignalC2Wread-onlycurrentMS Alarm indication signal (MS-AIS) on the client side. Applicable for SDH/Sonet signal formats. A: An 'all ones' SDH signal is detected. D: SDH signal recover…
1.3.6.1.4.1.8708.2.12.2.2.1.1.29ColumnmrtIfRemoteDefectIndicationread-onlycurrentRemote defect indication. Applicable for SDH/Sonet signal formats. A: RDI indication (in SDH frame) active. D: RDI indication inactive.
1.3.6.1.4.1.8708.2.12.2.2.1.1.30ColumnmrtIfLossOfSyncread-onlycurrentLoss of sync (GbE). Applicable for GbE signal formats. A: GbE 'frame' can not be located. D: GbE 'frame' is located.
1.3.6.1.4.1.8708.2.12.2.2.1.1.31ColumnmrtIfBitrateMismatchread-onlycurrentBitrate mismatch (Other). Applicable for other signal formats. D: The interface is unable to lock to the inserted signal. D: The interface is able to lock to t…
1.3.6.1.4.1.8708.2.12.2.2.1.1.32ColumnmrtIfLaserBiasread-onlycurrentMeasures laser bias current value in tenths of mA (0.1 mA).
1.3.6.1.4.1.8708.2.12.2.2.1.1.33ColumnmrtIfLaserBiasThresholdread-writecurrentSets the threshold for the laser bias alarm. in percentage relative to the value set during production. The preset value is 100%.
1.3.6.1.4.1.8708.2.12.2.2.1.1.34ColumnmrtIfJ0PathTraceread-onlycurrentThe recevied J0 path trace string. Applicable for SDH/Sonet signal formats.
1.3.6.1.4.1.8708.2.12.2.2.1.1.35ColumnmrtIfAuAlarmIndicationSignalW2Cread-onlycurrentAlarm indication signal (AIS) on the trunk-side. Applicable for SDH/Sonet signal formats. A: An 'all ones' SDH signal is detected. D: SDH signal recovered.
1.3.6.1.4.1.8708.2.12.2.2.1.1.36ColumnmrtIfAuLossOfPointerW2Cread-onlycurrentLoss of pointer detected on the trunk-side. Applicable for SDH/Sonet signal formats. A: A loss of pointer is detected. D: SDH signal recovered.
1.3.6.1.4.1.8708.2.12.2.2.1.1.37ColumnmrtIfTxSignalStatusread-onlycurrentThe operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal qual…
1.3.6.1.4.1.8708.2.12.2.2.1.1.38ColumnmrtIfTruncVc4read-writecurrentStates which VC4 in the STM-16 frame that the interface is connected to. 0 means unconnected, i.e. the signal passes through. (This may cause a loop depending …
1.3.6.1.4.1.8708.2.12.2.2.1.1.39ColumnmrtIfAuAlarmIndicationSignalC2Wread-onlycurrentAlarm indication signal (AIS) on the client-side. Applicable for SDH/Sonet signal formats. A: An 'all ones' SDH signal is detected. D: SDH signal recovered.
1.3.6.1.4.1.8708.2.12.2.2.1.1.40ColumnmrtIfAuLossOfPointerC2Wread-onlycurrentLoss of pointer detected on the client-side. Applicable for SDH/Sonet signal formats. A: A loss of pointer is detected. D: SDH signal recovered.
1.3.6.1.4.1.8708.2.12.2.2.1.1.41ColumnmrtIfTraceIntrusionModeread-writecurrentIndicates wether the trace identifier should be inserted in the transmitted signal. disabled - The trace identifier is taken from the recevied signal if possib…
1.3.6.1.4.1.8708.2.12.2.2.1.1.42ColumnmrtIfTraceTransmittedread-writecurrentThe trace identifier to be transmitted from this interface. Set to empty string for default value: <IP address>:<subrack>:<slot>:<port> Note that only the last…
1.3.6.1.4.1.8708.2.12.2.2.1.1.43ColumnmrtIfTraceReceivedread-onlycurrentThe received trace identifier for this interface.
1.3.6.1.4.1.8708.2.12.2.2.1.1.44ColumnmrtIfTraceExpectedread-writecurrentTrace identifier used for matching against the received trace identifier.
1.3.6.1.4.1.8708.2.12.2.2.1.1.45ColumnmrtIfTraceAlarmModeread-writecurrentControls if the trace identifier mismatch alarm should be raised. disabled - The alarm is disabled. enabled - The alarm is raised if expected trace identifier …
1.3.6.1.4.1.8708.2.12.2.2.1.1.46ColumnmrtIfTraceMismatchread-onlycurrentIndicates if the expected trace identifier differs from the received trace identifier. A: The received trace identifier differs from the expected trace identif…
1.3.6.1.4.1.8708.2.12.2.2.1.1.47ColumnmrtIfTruncVc4Statusread-onlydeprecatedShows the status of the VC4(s) that this port is connected to. undefined - used when the port is not connected to any VC4. Also used when an STM4 port is VC4s …
1.3.6.1.4.1.8708.2.12.2.2.1.1.48ColumnmrtIfMsAlarmIndicationSignalW2Cread-onlycurrentMS Alarm indication signal (MS-AIS) on the trunc side. Applicable for SDH/Sonet signal formats. A: An 'all ones' SDH signal is detected. D: SDH signal recovere…
1.3.6.1.4.1.8708.2.12.2.2.1.1.49ColumnmrtIfForwardAlsread-writecurrentForward Automatic Laser Shut-down. Decides the behaviour of the client laser (W2C) when the trunc signal is defected. disabled - The laser is NOT turned off at…
1.3.6.1.4.1.8708.2.12.2.2.1.1.50ColumnmrtIfSuppressRemoteAlarmsread-writecurrentSuppress AIS and RDI in the alarm list. The fault status on the port object can, however, be seen. disabled - alarms are not suppressed. enabled - alarms are s…
1.3.6.1.4.1.8708.2.12.2.2.1.1.51ColumnmrtIfConfigurationCommandread-onlycurrentCommand to change the signal format and, if applicable, also the speed. Synopsis: configure [<format> [<speed>]] If no arguments are given, the user will be pr…
1.3.6.1.4.1.8708.2.12.2.2.1.1.52ColumnmrtIfTrxCodeMismatchread-onlycurrentThe inserted transceiver does not have a legal manufacturer code. A: A transceiver with illegal code is inserted. D: The transceiver with illegal code is remov…
1.3.6.1.4.1.8708.2.12.2.2.1.1.53ColumnmrtIfTrxBitrateUnavailableread-onlycurrentThe inserted transceiver does not support the requested bit rate. A: A transceiver with other supported bit rate than the requested bit rate is inserted. D: Th…
1.3.6.1.4.1.8708.2.12.2.2.1.1.54ColumnmrtIfTrxMissingread-onlycurrentAn expected transceiver is missing. A: An expected transceiver is missing. D: The missing transceiver is inserted.
1.3.6.1.4.1.8708.2.12.2.2.1.1.55ColumnmrtIfTrxClassread-onlycurrentString that describes the transceiver class.
1.3.6.1.4.1.8708.2.12.2.2.1.1.56ColumnmrtIfEntityIdread-onlycurrentIndex in entity table.
1.3.6.1.4.1.8708.2.12.2.2.1.1.57ColumnmrtIfTransmitterFailedread-onlycurrentThe transceiver HW has detected a failure in the transmitter part. A: The transmitter has failed D: The transmitter is OK again
1.3.6.1.4.1.8708.2.12.2.2.1.1.58ColumnmrtIfReceiverSensitivityread-onlycurrentThe lowest power that the receiver is guaranteed to handle, in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.12.2.2.1.1.59ColumnmrtIfPowerLevelLowRelativeThresholdread-writecurrentThe lower threshold for received power level in units of 0.1 dB, relative to the receiver sensitivity.
1.3.6.1.4.1.8708.2.12.2.2.1.1.60ColumnmrtIfFarEndLoopbackread-writecurrentLoop the client TX signal back to the client RX. disabled - the signal is not looped enabled - the signal is looped.
1.3.6.1.4.1.8708.2.12.2.2.1.1.61ColumnmrtIfConfigureModeCommandread-onlycurrentCommand to change the TRX mode: CLIENT or LINE. Also select the TRX media. Synopsis: configureMode [<trxMode>] [<trxMedia>] If no arguments are given, the user…
1.3.6.1.4.1.8708.2.12.2.2.1.1.62ColumnmrtIfTrxModeread-createcurrentShows if the port is configured as: - normal CLIENT interface connected to non-Transmode or non-Infinera client equipment, with non-colored, or colored TRXes. …
1.3.6.1.4.1.8708.2.12.2.2.1.1.63ColumnmrtIfExpectedTxFrequencyread-writecurrentThe expected frequency given in hundreds of GHz (0.01 GHz).
1.3.6.1.4.1.8708.2.12.2.2.1.1.64ColumnmrtIfTxFrequencyread-onlycurrentThe transmitted frequency given in hundreds of GHz (0.01 GHz).
1.3.6.1.4.1.8708.2.12.2.2.1.1.65ColumnmrtIfUnexpectedTxFrequencyread-onlycurrentThe actual frequency does not match the pre-configured frequency. A pre-configured frequency of '0' matches all actual frequencies. A: The configured frequency…
1.3.6.1.4.1.8708.2.12.2.2.1.1.66ColumnmrtIfIllegalFrequencyread-onlycurrentThe frequency supported by the transceiver is not recognized by the system. A: Invalid or unknown frequency information is detected in the (pluggable) transcei…
1.3.6.1.4.1.8708.2.12.2.2.1.1.67ColumnmrtIfTrxMediaread-createcurrentDefines the media and capability of the TRX.
1.3.6.1.4.1.8708.2.12.2.2.1.1.68ColumnmrtIfTrxMediaMismatchread-onlycurrentThe TRX media does not match the expected one. A: Invalid or mismatching trx media is detected. D: The (pluggable) transceiver or board is replaced, or the con…
1.3.6.1.4.1.8708.2.12.2.2.1.1.69ColumnmrtIfLaserForcedOnread-writecurrentWhen enabled, the laser is on regardless of whether there is a trunc signal present or not. disabled - the laser is only on when there is a trunc signal. enabl…
1.3.6.1.4.1.8708.2.12.2.2.1.1.70ColumnmrtIfTruncAutoNegotiationModeread-writecurrentDecides whether auto negotiation shall be performed over the trunc connection. This is applicable when the terminating node at the other side of the trunc is c…
1.3.6.1.4.1.8708.2.12.2.2.1.1.71ColumnmrtIfObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.12.2.2.1.1.72ColumnmrtIfTxPowerLevelread-onlycurrentThe transmitted power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.12.2.2.1.1.73ColumnmrtIfLaserTempActualread-onlycurrentThe actual laser temperature in units of 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.12.2.2.1.1.74ColumnmrtIfHighSpeed2read-writecurrentThe expected signal bit rate in units of 1,000,000 bits (Mb) per second. The value is given with 2 decimals, so the resolution is 10 000 bits per second.
1.3.6.1.4.1.8708.2.12.2.2.1.1.75ColumnmrtIfRxSignalStatusread-onlycurrentThe operational state for incoming (RX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal qual…
1.3.6.1.4.1.8708.2.12.2.3NodelumentisMrtNotifications
1.3.6.1.4.1.8708.2.12.2.3.0NodemrtNotifyPrefix
1.3.6.1.4.1.8708.2.12.2.3.0.1NotificationmrtIfTxSignalStatusDowncurrentSent when the signal status attribute of an interface changes.
1.3.6.1.4.1.8708.2.12.2.3.0.2NotificationmrtIfTxSignalStatusUpcurrentSent when the signal status attribute of an interface changes.
1.3.6.1.4.1.8708.2.12.2.3.0.3NotificationmrtIfTxSignalStatusDegradedcurrentSent when the signal status attribute of an interface changes.