MIB Viewer

LUM-MUX-MIB

130 objects
The muxponder trunk interfaces. Muxponder client interfaces are found in the multi-rate client interface MIB. - General - MUX trunk interfaces
Imported Objects
LUM-REGlumModules lumMuxMIB
LUM-TCBoardOrInterfaceAdminStatus BoardOrInterfaceOperStatus FaultStatus LambdaFrequency MgmtNameString ObjectProperty PortNumber SlotNumber SubrackNumber
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIGauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.8708.1.1.14IdentitylumMuxMIBModuleThe muxponder trunk interfaces. Muxponder client interfaces are found in the multi-rate client interface MIB. - General - MUX trunk interfaces
1.3.6.1.4.1.8708.2.13.1NodelumMuxConfs
1.3.6.1.4.1.8708.2.13.1.1NodelumMuxGroups
1.3.6.1.4.1.8708.2.13.1.1.1GroupmuxGeneralGroupcurrentThe general objects.
1.3.6.1.4.1.8708.2.13.1.1.2GroupmuxIfGroupcurrentThe general objects.
1.3.6.1.4.1.8708.2.13.1.1.3GroupmuxIfGroupV2deprecatedThe general objects.
1.3.6.1.4.1.8708.2.13.1.1.4GroupmuxIfGroupV3deprecatedThe mux trunk interface objects V3.
1.3.6.1.4.1.8708.2.13.1.1.5GroupmuxIfGroupV4deprecatedThe mux trunk interface objects V4.
1.3.6.1.4.1.8708.2.13.1.1.6GroupmuxGeneralGroupV2deprecatedThe general objects.
1.3.6.1.4.1.8708.2.13.1.1.7GroupmuxVc4GroupdeprecatedThe vc4 objects.
1.3.6.1.4.1.8708.2.13.1.1.8GroupmuxIfGroupV5deprecatedThe mux trunk interface objects V5.
1.3.6.1.4.1.8708.2.13.1.1.9GroupmuxVc4GroupV2deprecatedThe vc4 objects.
1.3.6.1.4.1.8708.2.13.1.1.10GroupmuxIfGroupV6deprecatedThe mux trunk interface objects V6.
1.3.6.1.4.1.8708.2.13.1.1.11GroupmuxIfGroupV7deprecatedThe mux trunk interface objects V7.
1.3.6.1.4.1.8708.2.13.1.1.12GroupmuxIfGroupV8deprecatedThe mux trunk interface objects V8.
1.3.6.1.4.1.8708.2.13.1.1.13GroupmuxVc4GroupV3deprecatedThe vc4 objects.
1.3.6.1.4.1.8708.2.13.1.1.14GroupmuxVc4GroupV4deprecatedThe vc4 objects.
1.3.6.1.4.1.8708.2.13.1.1.15GroupmuxVc4GroupV5deprecatedThe vc4 objects.
1.3.6.1.4.1.8708.2.13.1.1.16GroupmuxIfGroupV9deprecatedThe mux trunk interface objects V9.
1.3.6.1.4.1.8708.2.13.1.1.17GroupmuxIfGroupV10deprecatedThe mux trunk interface objects V10.
1.3.6.1.4.1.8708.2.13.1.1.18GroupmuxIfGroupV11deprecatedThe mux trunk interface objects V11. (2.2)
1.3.6.1.4.1.8708.2.13.1.1.19GroupmuxGeneralGroupV3currentThe general objects.
1.3.6.1.4.1.8708.2.13.1.1.20GroupmuxIfGroupV12currentThe mux trunk interface objects V12. (4.0)
1.3.6.1.4.1.8708.2.13.1.1.21GroupmuxVc4GroupV6deprecatedThe vc4 objects (4.0).
1.3.6.1.4.1.8708.2.13.1.1.22GroupmuxVc4GroupV7currentThe vc4 objects (8.0).
1.3.6.1.4.1.8708.2.13.1.2NodelumMuxCompl
1.3.6.1.4.1.8708.2.13.1.2.1CompliancelumMuxBasicComplV1currentBasic implementation requirements for the muxponder MIB.
1.3.6.1.4.1.8708.2.13.1.2.2CompliancelumMuxBasicComplV2deprecatedBasic implementation requirements for the muxponder MIB V2.
1.3.6.1.4.1.8708.2.13.1.2.3CompliancelumMuxBasicComplV3deprecatedBasic implementation requirements for the muxponder MIB V3.
1.3.6.1.4.1.8708.2.13.1.2.4CompliancelumMuxBasicComplV4deprecatedBasic implementation requirements for the muxponder MIB V4.
1.3.6.1.4.1.8708.2.13.1.2.5CompliancelumMuxBasicComplV5deprecatedBasic implementation requirements for the muxponder MIB V5.
1.3.6.1.4.1.8708.2.13.1.2.6CompliancelumMuxBasicComplV6deprecatedBasic implementation requirements for the muxponder MIB V6.
1.3.6.1.4.1.8708.2.13.1.2.7CompliancelumMuxBasicComplV7deprecatedBasic implementation requirements for the muxponder MIB V7.
1.3.6.1.4.1.8708.2.13.1.2.8CompliancelumMuxBasicComplV8deprecatedBasic implementation requirements for the muxponder MIB V8.
1.3.6.1.4.1.8708.2.13.1.2.9CompliancelumMuxBasicComplV9deprecatedBasic implementation requirements for the muxponder MIB V9.
1.3.6.1.4.1.8708.2.13.1.2.10CompliancelumMuxBasicComplV10deprecatedBasic implementation requirements for the muxponder MIB V10.
1.3.6.1.4.1.8708.2.13.1.2.11CompliancelumMuxBasicComplV11deprecatedBasic implementation requirements for the muxponder MIB V11.
1.3.6.1.4.1.8708.2.13.1.2.12CompliancelumMuxBasicComplV12deprecatedBasic implementation requirements for the muxponder MIB V12.
1.3.6.1.4.1.8708.2.13.1.2.13CompliancelumMuxBasicComplV13deprecatedBasic implementation requirements for the muxponder MIB V13.
1.3.6.1.4.1.8708.2.13.1.2.14CompliancelumMuxBasicComplV14deprecatedBasic implementation requirements for the muxponder MIB V14.
1.3.6.1.4.1.8708.2.13.1.2.15CompliancelumMuxBasicComplV15deprecatedBasic implementation requirements for the muxponder MIB V15.
1.3.6.1.4.1.8708.2.13.1.2.16CompliancelumMuxBasicComplV16deprecatedBasic implementation requirements for the muxponder MIB V16.
1.3.6.1.4.1.8708.2.13.1.2.17CompliancelumMuxBasicComplV17deprecatedBasic implementation requirements for the muxponder MIB V17. (2.2)
1.3.6.1.4.1.8708.2.13.1.2.18CompliancelumMuxBasicComplV18deprecatedBasic implementation requirements for the muxponder MIB V18. (3.1)
1.3.6.1.4.1.8708.2.13.1.2.19CompliancelumMuxBasicComplV19deprecatedBasic implementation requirements for the muxponder MIB V19. (4.0)
1.3.6.1.4.1.8708.2.13.1.2.20CompliancelumMuxBasicComplV20deprecatedBasic implementation requirements for the muxponder MIB V20. (8.0)
1.3.6.1.4.1.8708.2.13.1.2.21CompliancelumMuxBasicComplV21currentBasic implementation requirements for the muxponder MIB V21. (17.0)
1.3.6.1.4.1.8708.2.13.2NodelumMuxMIBObjects
1.3.6.1.4.1.8708.2.13.2.1NodemuxGeneral
1.3.6.1.4.1.8708.2.13.2.1.1ScalarmuxGeneralLastChangeTimeread-onlycurrentThe time when the configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.13.2.1.2ScalarmuxGeneralStateLastChangeTimeread-onlycurrentThe time when the state of the MIB was last changed.
1.3.6.1.4.1.8708.2.13.2.1.3ScalarmuxGeneralMuxIfTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.13.2.1.4ScalarmuxGeneralMuxVc4TableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.13.2.2NodemuxIfList
1.3.6.1.4.1.8708.2.13.2.2.1TablemuxIfTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.13.2.2.1.1RowmuxIfEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.13.2.2.1.1.1ColumnmuxIfIndexread-onlycurrentAn arbitrary index assigned to each if entry.
1.3.6.1.4.1.8708.2.13.2.2.1.1.2ColumnmuxIfNameread-onlycurrentThe management name of the interface, for example 'muxi:1:2:1', where the first number indicates sub-rack, the second slot number and the third is the port num…
1.3.6.1.4.1.8708.2.13.2.2.1.1.3ColumnmuxIfDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.13.2.2.1.1.4ColumnmuxIfSubrackread-onlycurrentThe number of the subrack where the interface is located.
1.3.6.1.4.1.8708.2.13.2.2.1.1.5ColumnmuxIfSlotread-onlycurrentThe number of the slot where the interface is located.
1.3.6.1.4.1.8708.2.13.2.2.1.1.6ColumnmuxIfTxPortread-onlycurrentThe number of the port where the TX-side of the interface is located.
1.3.6.1.4.1.8708.2.13.2.2.1.1.7ColumnmuxIfRxPortread-onlycurrentThe number of the port where the RX-side of the interface is located.
1.3.6.1.4.1.8708.2.13.2.2.1.1.8ColumnmuxIfInvPhysIndexOrZeroread-onlycurrentThe row in the invPhysTable for this interface. Set to 0 if not known.
1.3.6.1.4.1.8708.2.13.2.2.1.1.9ColumnmuxIfPowerLevelread-onlycurrentThe received power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.13.2.2.1.1.10ColumnmuxIfPowerLevelHighThresholdread-writecurrentThe upper threshold for received power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.13.2.2.1.1.11ColumnmuxIfPowerLevelLowThresholdread-writecurrentThe lower threshold for received power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.13.2.2.1.1.12ColumnmuxIfAdminStatusread-writecurrentThe administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended f…
1.3.6.1.4.1.8708.2.13.2.2.1.1.13ColumnmuxIfOperStatusread-onlycurrentThe operational state for the interface. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventi…
1.3.6.1.4.1.8708.2.13.2.2.1.1.14ColumnmuxIfLossOfSignalread-onlycurrentLoss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication.
1.3.6.1.4.1.8708.2.13.2.2.1.1.15ColumnmuxIfReceivedPowerHighread-onlycurrentReceived power level is too high. Applicable for all signal formats. A: The received power level exceeds the the built-in overload threshold. D: The received p…
1.3.6.1.4.1.8708.2.13.2.2.1.1.16ColumnmuxIfReceivedPowerLowread-onlycurrentReceived power level low threshold exceeded. Applicable for all signal formats. A: The received power level is below the associated threshold. D: The received …
1.3.6.1.4.1.8708.2.13.2.2.1.1.17ColumnmuxIfBitrateMismatchread-onlycurrentBitrate mismatch (Other). Applicable for other signal formats. D: The interface is unable to lock to the inserted signal. D: The interface is able to lock to t…
1.3.6.1.4.1.8708.2.13.2.2.1.1.18ColumnmuxIfLaserBiasread-onlycurrentMeasures laser bias current value in tenths of mA (0.1 mA).
1.3.6.1.4.1.8708.2.13.2.2.1.1.19ColumnmuxIfLaserBiasThresholdread-writecurrentSets the threshold for the laser bias alarm. in percentage relative to the value set during production. The preset value is 100%.
1.3.6.1.4.1.8708.2.13.2.2.1.1.20ColumnmuxIfJ0PathTraceread-onlydeprecatedNote: This attribute is deprecated! The recevied J0 path trace string. Applicable for SDH/Sonet signal formats.
1.3.6.1.4.1.8708.2.13.2.2.1.1.21ColumnmuxIfAlarmIndicationSignalread-onlycurrentAlarm indication signal. Applicable for SDH/Sonet signal formats. A: An 'all ones' SDH signal is detected. D: SDH signal recovered.
1.3.6.1.4.1.8708.2.13.2.2.1.1.22ColumnmuxIfLossOfFrameread-onlycurrentLoss of frame. Applicable for SDH/Sonet signal formats. A: SDH frame can not be located. D: SDH frame is located.
1.3.6.1.4.1.8708.2.13.2.2.1.1.23ColumnmuxIfLaserStatusread-onlycurrentThe operational state of the TX-side laser. off - The laser is turned off. on - The laser is turned on.
1.3.6.1.4.1.8708.2.13.2.2.1.1.24ColumnmuxIfTxDirectionread-writecurrentThe direction of the transmitted signal. undefined - Unknown/Dont care toWest - The transmitted signal is sent to west. toEast - The transmitted signal is sent…
1.3.6.1.4.1.8708.2.13.2.2.1.1.25ColumnmuxIfExpectedTxLambdaread-writecurrentThe expected frequency given in hundreds of GHz (0.01 GHz). This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.13.2.2.1.1.26ColumnmuxIfTxLambdaread-onlycurrentThe transmitted frequency given in hundreds of GHz (0.01 GHz).
1.3.6.1.4.1.8708.2.13.2.2.1.1.27ColumnmuxIfTraceIntrusionModeread-onlycurrentIndicates wether the trace identifier should be inserted in the transmitted signal. disabled - The trace identifier is taken from the recevied signal if possib…
1.3.6.1.4.1.8708.2.13.2.2.1.1.28ColumnmuxIfTraceTransmittedread-writecurrentThe trace identifier to be transmitted from this interface. Set to empty string for default value: <IP address>:<subrack>:<slot>:<port> Note that only the last…
1.3.6.1.4.1.8708.2.13.2.2.1.1.29ColumnmuxIfTraceReceivedread-onlycurrentThe received trace identifier for this interface.
1.3.6.1.4.1.8708.2.13.2.2.1.1.30ColumnmuxIfTraceExpectedread-writecurrentTrace identifier used for matching against the received trace identifier.
1.3.6.1.4.1.8708.2.13.2.2.1.1.31ColumnmuxIfTraceAlarmModeread-writecurrentControls if the trace identifier mismatch alarm should be raised. disabled - The alarm is disabled. enabled - The alarm is raised if expected trace identifier …
1.3.6.1.4.1.8708.2.13.2.2.1.1.32ColumnmuxIfTraceMismatchread-onlycurrentIndicates if the expected trace identifier differs from the received trace identifier. A: The received trace identifier differs from the expected trace identif…
1.3.6.1.4.1.8708.2.13.2.2.1.1.33ColumnmuxIfOHTransparencyread-writecurrentThe 'OH Transparency' setting shall be set to 'off' for standard SDH/SONET mode. When set to 'on', the following tributary OH-bytes are transparently transport…
1.3.6.1.4.1.8708.2.13.2.2.1.1.34ColumnmuxIfSuppressRemoteAlarmsread-writecurrentSuppress AIS and RDI in the alarm list. The fault status on the port object can, however, be seen. disabled - alarms are not suppressed. enabled - alarms are s…
1.3.6.1.4.1.8708.2.13.2.2.1.1.35ColumnmuxIfHighSpeedMinread-onlycurrentThe minmum speed in units of 1,000,000 bits (Mb) per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of…
1.3.6.1.4.1.8708.2.13.2.2.1.1.36ColumnmuxIfHighSpeedMaxread-onlycurrentThe maximum speed in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-…
1.3.6.1.4.1.8708.2.13.2.2.1.1.37ColumnmuxIfTrxCodeMismatchread-onlycurrentThe inserted transceiver does not have a legal manufacturer code. A: A transceiver with illegal code is inserted. D: The transceiver with illegal code is remov…
1.3.6.1.4.1.8708.2.13.2.2.1.1.38ColumnmuxIfTrxBitrateUnavailableread-onlycurrentThe inserted transceiver does not support the requested bit rate. A: A transceiver with other supported bit rate than the requested bit rate is inserted. D: Th…
1.3.6.1.4.1.8708.2.13.2.2.1.1.39ColumnmuxIfTrxMissingread-onlycurrentAn expected transceiver is missing. A: An expected transceiver is missing. D: The missing transceiver is inserted.
1.3.6.1.4.1.8708.2.13.2.2.1.1.40ColumnmuxIfTrxClassread-onlycurrentString that describes the transceiver class.
1.3.6.1.4.1.8708.2.13.2.2.1.1.41ColumnmuxIfTransmitterFailedread-onlycurrentThe transceiver HW has detected a failure in the transmitter part. A: The transmitter has failed D: The transmitter is OK again
1.3.6.1.4.1.8708.2.13.2.2.1.1.42ColumnmuxIfUnexpectedFrequencyread-onlycurrentThe actual frequency does not match the pre-configured frequency. A pre-configured frequency of '0' matches all actual frequencies. A: The configured frequency…
1.3.6.1.4.1.8708.2.13.2.2.1.1.43ColumnmuxIfIllegalFrequencyread-onlycurrentThe frequency supported by the transceiver is not recognized by the system. A: Invalid or unknown frequency information is detected in the (pluggable) transcei…
1.3.6.1.4.1.8708.2.13.2.2.1.1.44ColumnmuxIfReceiverSensitivityread-onlycurrentThe lowest power that the receiver is guaranteed to handle, in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.13.2.2.1.1.45ColumnmuxIfPowerLevelLowRelativeThresholdread-writecurrentThe lower threshold for received power level in units of 0.1 dB, relative to the receiver sensitivity.
1.3.6.1.4.1.8708.2.13.2.2.1.1.46ColumnmuxIfObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.13.2.2.1.1.47ColumnmuxIfTxPowerLevelread-onlycurrentThe transmitted power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.13.2.2.1.1.48ColumnmuxIfLaserTempActualread-onlycurrentThe actual laser temperature in units of 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.13.2.3NodemuxVc4List
1.3.6.1.4.1.8708.2.13.2.3.1TablemuxVc4Tablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.13.2.3.1.1RowmuxVc4Entrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.13.2.3.1.1.1ColumnmuxVc4Indexread-onlycurrentAn arbitrary index assigned to each if entry.
1.3.6.1.4.1.8708.2.13.2.3.1.1.2ColumnmuxVc4Nameread-onlycurrentThe management name of the vc4, e.g. vc4:1:2:21-22:8 where the first number indicates sub-rack, the second slot number and the third/forth are the port numbers…
1.3.6.1.4.1.8708.2.13.2.3.1.1.3ColumnmuxVc4Descrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.13.2.3.1.1.4ColumnmuxVc4Subrackread-onlycurrentThe number of the subrack where the vc4 is located.
1.3.6.1.4.1.8708.2.13.2.3.1.1.5ColumnmuxVc4Slotread-onlycurrentThe number of the slot where the vc4 is located.
1.3.6.1.4.1.8708.2.13.2.3.1.1.6ColumnmuxVc4TxPortread-onlycurrentThe number of the port where the TX-side of the vc4 is located.
1.3.6.1.4.1.8708.2.13.2.3.1.1.7ColumnmuxVc4RxPortread-onlycurrentThe number of the port where the RX-side of the vc4 is located.
1.3.6.1.4.1.8708.2.13.2.3.1.1.8ColumnmuxVc4Vc4read-onlycurrentThe id of the vc4 within the STM16 frame.
1.3.6.1.4.1.8708.2.13.2.3.1.1.9ColumnmuxVc4Moderead-onlycurrentWhat to do with the vc4. addDrop - Add/drop it from/to the ports specified by muxVc4ClientDropPort and muxVc4ClientAddPort. passThrough - Pass-through.
1.3.6.1.4.1.8708.2.13.2.3.1.1.10ColumnmuxVc4ClientDropPortread-onlycurrentThe connected drop port, if muxVc4Mode is set to 'addDrop'. 0 is undefined (used at pass-through). For mxp028: 1 - first SMT4 i/f 3 - second STM4 i/f 5 - first…
1.3.6.1.4.1.8708.2.13.2.3.1.1.11ColumnmuxVc4TxDirectionread-onlycurrentThe direction of the transmitted signal. undefined - Unknown/Dont care toWest - The transmitted signal is sent to west. toEast - The transmitted signal is sent…
1.3.6.1.4.1.8708.2.13.2.3.1.1.12ColumnmuxVc4ClientAddPortread-onlycurrentThe connected add port, if muxVc4Mode is set to 'addDrop'. 0 is undefined (used at pass-through) For mxp028: 2 - first SMT4 i/f 4 - second STM4 i/f 6 - first S…
1.3.6.1.4.1.8708.2.13.2.3.1.1.13ColumnmuxVc4ConnectionModeread-writedeprecatedDescribes how the VC is used in the ring and the node. unused - The VC4 is not used in the ring. ringUsed - the VC4 is used in the ring, but is not allowed to …
1.3.6.1.4.1.8708.2.13.2.3.1.1.14ColumnmuxVc4ConnectionStatusread-onlydeprecatedHow the VC4 is handled. addDrop - Add/drop it from/to the ports specified by muxVc4ClientDropPort and muxVc4ClientAddPort. passThrough - Pass-through the node.…
1.3.6.1.4.1.8708.2.13.2.3.1.1.15ColumnmuxVc4ConnectionOverviewread-onlycurrentWhat to do with the vc4. addDrop - Add/drop it from/to the ports specified by muxVc4ClientDropPort and muxVc4ClientAddPort. passThrough - Pass-through the node.
1.3.6.1.4.1.8708.2.13.2.3.1.1.16ColumnmuxVc4ObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.13.2.3.1.1.17ColumnmuxVc4AuAlarmIndicationSignalW2Cread-onlycurrentAlarm indication signal (AIS) on the trunk-side. Applicable for SDH/Sonet signal formats. A: An 'all ones' SDH signal is detected. D: SDH signal recovered.
1.3.6.1.4.1.8708.2.13.2.3.1.1.18ColumnmuxVc4AuLossOfPointerW2Cread-onlycurrentLoss of pointer detected on the trunk-side. Applicable for SDH/Sonet signal formats. A: A loss of pointer is detected. D: SDH signal recovered.
1.3.6.1.4.1.8708.2.13.2.3.1.1.19ColumnmuxVc4RxSignalStatusread-onlycurrentThe operational state for incoming (RX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal qual…
1.3.6.1.4.1.8708.2.13.2.3.1.1.20ColumnmuxVc4ConcatenationStatusread-onlycurrentDescribes if the VC4s are concatenated. on - Concatenation is used. off - No concatenation is used.
1.3.6.1.4.1.8708.2.13.2.3.1.1.21ColumnmuxVc4PayloadStatusread-onlycurrentDescribes if the VC4 contains payload. equipped - VC4 contains payload. unequipped - No payload in VC4.
1.3.6.1.4.1.8708.2.13.2.3.1.1.22ColumnmuxVc4AdminStatusread-writecurrentThe administrative state for the interface. down - The interface should be inactive. up - The interface should be activated when it becomes available. Alarms a…
Type Definitions
NameSyntaxStatusDescription
MuxTxDirectionINTEGER { undefined (0), toWest (1), toEast (2) }currentThe direction of the transmitted signal. undefined - Unknown/Dont care toWest - The transmitted signal is sent to west toEast - The transmitted signal is sent to east