LUM-PM-MIB
734 objects
The performance measurement MIB. - General - 15 minute interval measurements per measurement point - 24 hour interval measurements per measurement point - Current meters and configuration per interface
Imported Objects
| LUM-REG | lumModules lumPmMIB |
| LUM-TC | BoardOrInterfaceAdminStatus BoardOrInterfaceOperStatus CommandString FaultStatus MgmtNameString ObjectProperty OnOff PortNumber SlotNumber SubrackNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.16 | IdentitylumPmMIBModule | The performance measurement MIB. - General - 15 minute interval measurements per measurement point - 24 hour interval measurements per measurement point - Curr… | ||
| 1.3.6.1.4.1.8708.2.15.1 | NodelumPmConfs | |||
| 1.3.6.1.4.1.8708.2.15.1.1 | NodelumPmGroups | |||
| 1.3.6.1.4.1.8708.2.15.1.1.1 | GrouppmGeneralGroup | deprecated | The general objects. | |
| 1.3.6.1.4.1.8708.2.15.1.1.3 | GrouppmIntervalGroup | deprecated | The 15 minute interval objects. | |
| 1.3.6.1.4.1.8708.2.15.1.1.5 | GrouppmInterval24hGroup | deprecated | The 24 hour interval objects. | |
| 1.3.6.1.4.1.8708.2.15.1.1.6 | GrouppmIfGroup | deprecated | The pm interface configuration and current meters objects. | |
| 1.3.6.1.4.1.8708.2.15.1.1.7 | GrouppmLogGeneralGroup | deprecated | The general log object. | |
| 1.3.6.1.4.1.8708.2.15.1.1.8 | GrouppmFileGroup | deprecated | The 15 minute interval file objects. | |
| 1.3.6.1.4.1.8708.2.15.1.1.9 | GrouppmFile24hGroup | deprecated | The 24 hour interval file objects. | |
| 1.3.6.1.4.1.8708.2.15.1.1.10 | GrouppmNotificationGroup | current | The pm notifications. | |
| 1.3.6.1.4.1.8708.2.15.1.1.11 | GrouppmIfGroupV2 | deprecated | The pm interface configuration and current meters objects V2. | |
| 1.3.6.1.4.1.8708.2.15.1.1.12 | GrouppmGeneralGroupV2 | deprecated | The general objects. | |
| 1.3.6.1.4.1.8708.2.15.1.1.13 | GrouppmControlGroup | deprecated | The control group. | |
| 1.3.6.1.4.1.8708.2.15.1.1.14 | GrouppmIfGroupV3 | current | The pm interface configuration and current meters objects V3. | |
| 1.3.6.1.4.1.8708.2.15.1.1.15 | GrouppmFileGroupV2 | current | The 15 minute interval file objects V2. | |
| 1.3.6.1.4.1.8708.2.15.1.1.16 | GrouppmFile24hGroupV2 | current | The 24 hour interval file objects V2. | |
| 1.3.6.1.4.1.8708.2.15.1.1.17 | GrouppmIfGroupV4 | deprecated | The pm interface configuration and current meters objects V4. | |
| 1.3.6.1.4.1.8708.2.15.1.1.18 | GrouppmIfGroupV5 | deprecated | The pm interface configuration and current meters objects V4. | |
| 1.3.6.1.4.1.8708.2.15.1.1.19 | GrouppmFileGroupV3 | deprecated | The 15 minute interval file objects V3. | |
| 1.3.6.1.4.1.8708.2.15.1.1.20 | GrouppmFile24hGroupV3 | deprecated | The 24 hour interval file objects V3. | |
| 1.3.6.1.4.1.8708.2.15.1.1.21 | GrouppmFileGroupV4 | current | The 15 minute interval file objects V4. | |
| 1.3.6.1.4.1.8708.2.15.1.1.22 | GrouppmFile24hGroupV4 | current | The 24 hour interval file objects V4. | |
| 1.3.6.1.4.1.8708.2.15.1.1.23 | GrouppmIntervalGroupV2 | deprecated | The 15 minute interval objects V2. | |
| 1.3.6.1.4.1.8708.2.15.1.1.24 | GrouppmInterval24hGroupV2 | deprecated | The 24 hour interval objects V2. | |
| 1.3.6.1.4.1.8708.2.15.1.1.25 | GrouppmIfGroupV6 | deprecated | The pm interface configuration and current meters objects V6. | |
| 1.3.6.1.4.1.8708.2.15.1.1.26 | GrouppmLogGeneralGroupV2 | deprecated | The general log object. | |
| 1.3.6.1.4.1.8708.2.15.1.1.27 | GrouppmIntervalGroupV3 | deprecated | The 15 minute interval objects V3. | |
| 1.3.6.1.4.1.8708.2.15.1.1.28 | GrouppmInterval24hGroupV3 | deprecated | The 24 hour interval objects V3. | |
| 1.3.6.1.4.1.8708.2.15.1.1.29 | GrouppmIfGroupV7 | deprecated | The pm interface configuration and current meters objects V7 (3.1). | |
| 1.3.6.1.4.1.8708.2.15.1.1.30 | GrouppmGeneralGroupV3 | deprecated | The general objects. (3.1) | |
| 1.3.6.1.4.1.8708.2.15.1.1.31 | GrouppmLogGeneralGroupV3 | deprecated | The general log object. | |
| 1.3.6.1.4.1.8708.2.15.1.1.32 | GrouppmIntervalGroupV4 | deprecated | The 15 minute interval objects V4. | |
| 1.3.6.1.4.1.8708.2.15.1.1.33 | GrouppmInterval24hGroupV4 | deprecated | The 24 hour interval objects V4. | |
| 1.3.6.1.4.1.8708.2.15.1.1.34 | GrouppmIfGroupV8 | deprecated | The pm interface configuration and current meters objects V8 (6.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.35 | GrouppmIntervalGroupV5 | deprecated | The 15 minute interval objects V5. (6.0) | |
| 1.3.6.1.4.1.8708.2.15.1.1.36 | GrouppmInterval24hGroupV5 | deprecated | The 24 hour interval objects V5. (6.0) | |
| 1.3.6.1.4.1.8708.2.15.1.1.37 | GrouppmLogGeneralGroupV4 | deprecated | The general log object v4 (10.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.38 | GrouppmIfGroupV9 | deprecated | The pm interface configuration and current meters objects V9 (11.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.39 | GrouppmIntervalGroupV6 | deprecated | The 15 minute interval objects V6. (11.0) | |
| 1.3.6.1.4.1.8708.2.15.1.1.40 | GrouppmInterval24hGroupV6 | deprecated | The 24 hour interval objects V6. (11.0) | |
| 1.3.6.1.4.1.8708.2.15.1.1.41 | GrouppmEthTdGroup | deprecated | The Ethernet Traffic Data PM configuration and current meters objects V1 (11.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.42 | GrouppmEthTmGroup | current | The Ethernet Traffic Management PM configuration and current meters objects V1 (11.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.43 | GrouppmEthOamGroup | current | The Ethernet OAM PM configuration and current meters objects V1 (11.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.44 | GrouppmGeneralGroupV4 | deprecated | The general objects. (11.0) | |
| 1.3.6.1.4.1.8708.2.15.1.1.45 | GrouppmEthTdGroupV2 | deprecated | The Ethernet Traffic Data PM configuration and current meters objects V1 (12.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.46 | GrouppmIntervalGroupV7 | deprecated | The 15 minute interval objects V7. (12.0) | |
| 1.3.6.1.4.1.8708.2.15.1.1.47 | GrouppmInterval24hGroupV7 | deprecated | The 24 hour interval objects V7. (12.0) | |
| 1.3.6.1.4.1.8708.2.15.1.1.48 | GrouppmIntervalGroupV8 | deprecated | The 15 minute interval objects V8. (13.0) | |
| 1.3.6.1.4.1.8708.2.15.1.1.49 | GrouppmInterval24hGroupV8 | deprecated | The 24 hour interval objects V8. (13.0) | |
| 1.3.6.1.4.1.8708.2.15.1.1.50 | GrouppmIfGroupV10 | deprecated | The pm interface configuration and current meters objects V10 (15.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.51 | GrouppmIfGroupV11 | deprecated | The pm interface configuration and current meters objects V11 (16.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.52 | GrouppmEthTdGroupV3 | deprecated | The Ethernet Traffic Data PM configuration and current meters objects V3 (16.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.53 | GrouppmControlGroupV2 | current | The control group (16.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.54 | GrouppmEthDropGroup | deprecated | The Ethernet drop counters configuration and current meters objects (16.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.55 | GrouppmEthClassificationGroup | current | The Ethernet classification counters configuration and current meters objects (16.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.56 | GrouppmLogGeneralGroupV5 | current | The general log object v5 (18.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.57 | GrouppmEthClassificationGroupV2 | current | The Ethernet classification counters configuration and current meters objects V2 (18.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.58 | GrouppmEthTdGroupV4 | deprecated | The Ethernet Traffic Data PM configuration and current meters objects V4 (R21 ??). | |
| 1.3.6.1.4.1.8708.2.15.1.1.59 | GrouppmEthTdGroupV5 | current | The Ethernet Traffic Data PM configuration and current meters objects V5 (R26.1). | |
| 1.3.6.1.4.1.8708.2.15.1.1.60 | GrouppmIfGroupV12 | current | The pm interface configuration and current meters objects V12 (R26.1). | |
| 1.3.6.1.4.1.8708.2.15.1.1.61 | GrouppmGeneralGroupV5 | current | The general objects. (27.0) | |
| 1.3.6.1.4.1.8708.2.15.1.1.62 | GrouppmEthDropGroupV2 | deprecated | The Ethernet drop counters configuration and current meters objects (27.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.63 | GrouppmEthDropGroupV3 | current | The Ethernet drop counters configuration and current meters objects (32.0). | |
| 1.3.6.1.4.1.8708.2.15.1.1.64 | GrouppmEthEgressGroup | current | The Ethernet egress counters configuration and current meters objects (32.0). | |
| 1.3.6.1.4.1.8708.2.15.1.2 | NodelumPmCompl | |||
| 1.3.6.1.4.1.8708.2.15.1.2.1 | CompliancelumPmBasicComplV1 | deprecated | Basic implementation requirements for the PM MIB. | |
| 1.3.6.1.4.1.8708.2.15.1.2.2 | CompliancelumPmBasicComplV2 | deprecated | Basic implementation requirements for the PM MIB V2. | |
| 1.3.6.1.4.1.8708.2.15.1.2.3 | CompliancelumPmBasicComplV3 | deprecated | Basic implementation requirements for the PM MIB V3. | |
| 1.3.6.1.4.1.8708.2.15.1.2.4 | CompliancelumPmBasicComplV4 | deprecated | Basic implementation requirements for the PM MIB V4. | |
| 1.3.6.1.4.1.8708.2.15.1.2.5 | CompliancelumPmBasicComplV5 | deprecated | Basic implementation requirements for the PM MIB V5. | |
| 1.3.6.1.4.1.8708.2.15.1.2.6 | CompliancelumPmBasicComplV6 | deprecated | Basic implementation requirements for the PM MIB V6. | |
| 1.3.6.1.4.1.8708.2.15.1.2.7 | CompliancelumPmBasicComplV7 | deprecated | Basic implementation requirements for the PM MIB V7. | |
| 1.3.6.1.4.1.8708.2.15.1.2.8 | CompliancelumPmBasicComplV8 | deprecated | Basic implementation requirements for the PM MIB V8. | |
| 1.3.6.1.4.1.8708.2.15.1.2.9 | CompliancelumPmBasicComplV9 | deprecated | Basic implementation requirements for the PM MIB V9 (3.0). | |
| 1.3.6.1.4.1.8708.2.15.1.2.10 | CompliancelumPmBasicComplV10 | deprecated | Basic implementation requirements for the PM MIB V10 (3.1). | |
| 1.3.6.1.4.1.8708.2.15.1.2.11 | CompliancelumPmBasicComplV11 | deprecated | Basic implementation requirements for the PM MIB V11 (3.2). | |
| 1.3.6.1.4.1.8708.2.15.1.2.12 | CompliancelumPmBasicComplV12 | deprecated | Basic implementation requirements for the PM MIB V12 (6.0). | |
| 1.3.6.1.4.1.8708.2.15.1.2.13 | CompliancelumPmBasicComplV13 | deprecated | Basic implementation requirements for the PM MIB V13 (10.0). | |
| 1.3.6.1.4.1.8708.2.15.1.2.14 | CompliancelumPmBasicComplV14 | deprecated | Basic implementation requirements for the PM MIB V14 (11.0). | |
| 1.3.6.1.4.1.8708.2.15.1.2.15 | CompliancelumPmBasicComplV15 | deprecated | Basic implementation requirements for the PM MIB V15 (12.0). | |
| 1.3.6.1.4.1.8708.2.15.1.2.16 | CompliancelumPmBasicComplV16 | deprecated | Basic implementation requirements for the PM MIB V16 (15.0). | |
| 1.3.6.1.4.1.8708.2.15.1.2.17 | CompliancelumPmBasicComplV17 | deprecated | Basic implementation requirements for the PM MIB V17 (16.0). | |
| 1.3.6.1.4.1.8708.2.15.1.2.18 | CompliancelumPmBasicComplV18 | deprecated | Basic implementation requirements for the PM MIB V18 (17.0). | |
| 1.3.6.1.4.1.8708.2.15.1.2.19 | CompliancelumPmBasicComplV19 | deprecated | Basic implementation requirements for the PM MIB V19 (17.0). | |
| 1.3.6.1.4.1.8708.2.15.1.2.20 | CompliancelumPmBasicComplV20 | deprecated | Basic implementation requirements for the PM MIB V20 (18.0). | |
| 1.3.6.1.4.1.8708.2.15.1.2.21 | CompliancelumPmBasicComplV21 | deprecated | Basic implementation requirements for the PM MIB V21 (R21.0). | |
| 1.3.6.1.4.1.8708.2.15.1.2.22 | CompliancelumPmBasicComplV22 | deprecated | Basic implementation requirements for the PM MIB V22 (R26.1). | |
| 1.3.6.1.4.1.8708.2.15.1.2.23 | CompliancelumPmBasicComplV23 | deprecated | Basic implementation requirements for the PM MIB V23 (R27.0). | |
| 1.3.6.1.4.1.8708.2.15.1.2.24 | CompliancelumPmBasicComplV24 | current | Basic implementation requirements for the PM MIB V24 (R32.0). | |
| 1.3.6.1.4.1.8708.2.15.2 | NodelumPmMIBObjects | |||
| 1.3.6.1.4.1.8708.2.15.2.1 | NodepmGeneral | |||
| 1.3.6.1.4.1.8708.2.15.2.1.1 | ScalarpmGeneralLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.15.2.1.2 | ScalarpmGeneralStateLastChangeTime | read-only | current | The time when the state of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.15.2.1.3 | ScalarpmGeneralPmIfTableSize | read-only | current | Size of table. |
| 1.3.6.1.4.1.8708.2.15.2.1.4 | ScalarpmGeneralPmEthTdTableSize | read-only | current | Size of table. |
| 1.3.6.1.4.1.8708.2.15.2.1.5 | ScalarpmGeneralPmEthTmTableSize | read-only | obsolete | Size of table. |
| 1.3.6.1.4.1.8708.2.15.2.1.6 | ScalarpmGeneralPmEthOamTableSize | read-only | obsolete | Size of table. |
| 1.3.6.1.4.1.8708.2.15.2.1.7 | ScalarpmGeneralPmEthDropTableSize | read-only | current | Size of table. |
| 1.3.6.1.4.1.8708.2.15.2.1.8 | ScalarpmGeneralPmEthClassificationTableSize | read-only | current | Size of table. |
| 1.3.6.1.4.1.8708.2.15.2.1.9 | ScalarpmGeneralPmMpoLanesTableSize | read-only | current | Size of table. |
| 1.3.6.1.4.1.8708.2.15.2.2 | NodepmInterval | |||
| 1.3.6.1.4.1.8708.2.15.2.2.1 | TablepmIntervalTable | not-accessible | deprecated | The line tx 15 min interval table. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1 | RowpmIntervalEntry | not-accessible | deprecated | An entry in the interval table. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.1 | ColumnpmIntervalSubrack | read-only | current | The subrack number for the interface in question. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.2 | ColumnpmIntervalSlot | read-only | current | The slot number for the interface in question. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.3 | ColumnpmIntervalPort | read-only | current | The port number for the interface in question. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.4 | ColumnpmIntervalNumber | read-only | current | A number between 1 and 40, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.5 | ColumnpmIntervalIsSuspect | read-only | current | This variable indicates if the data for this interval is suspect. The interval may for example contain measurements for a part of the interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.6 | ColumnpmIntervalRxES | read-only | current | The counter associated with the number of Errored Seconds in a particular 15 min interval during the past 15 min intervals. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.7 | ColumnpmIntervalRxSES | read-only | current | The counter associated with the number of Severely Errored Seconds in a particular 15 min interval during the past 15 min intervals. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.8 | ColumnpmIntervalRxBBE | read-only | current | The counter associated with the number of Background Block Errors in a particular 15 min interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.9 | ColumnpmIntervalRxUAS | read-only | current | The counter associated with the number of Unavailable Seconds in a particular 15 min interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.10 | ColumnpmIntervalTxES | read-only | current | The counter associated with the number of Errored Seconds in a particular 15 min interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.11 | ColumnpmIntervalTxSES | read-only | current | The counter associated with the number of Severely Errored Seconds in a particular 15 min interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.12 | ColumnpmIntervalTxBBE | read-only | current | The counter associated with the number of Background Block Errors in the current 15 min interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.13 | ColumnpmIntervalTxUAS | read-only | current | The counter associated with the number of Unavailable Seconds in a particular 15 min interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.14 | ColumnpmIntervalName | read-only | current | The name of the interface. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.15 | ColumnpmIntervalRxPowerLevel | read-only | current | The received power level in units of 0.1 dBm sampled some time during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.16 | ColumnpmIntervalGbeMaxUtilization | read-only | current | The maximum bandwidth utilization of the GbE signal during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.17 | ColumnpmIntervalTxPowerLevel | read-only | current | The transmitted power level in units of 0.1 dBm sampled some time during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.18 | ColumnpmIntervalRxUndersizedFrames | read-only | current | The amount of undersized frames during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.19 | ColumnpmIntervalRxOversizedFrames | read-only | current | The amount of oversized frames during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.20 | ColumnpmIntervalRxFragments | read-only | current | The amount of fragments during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.21 | ColumnpmIntervalRxFcsErrors | read-only | current | The amount of frames with FCS or alignment errors during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.22 | ColumnpmIntervalRxInvalidCeVlanId | read-only | current | The amount of frames with invalid CE-VLAN id during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.23 | ColumnpmIntervalTxOctets | read-only | current | The amount of octets transmitted OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.24 | ColumnpmIntervalTxFrames | read-only | current | The amount of frames transmitted OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.25 | ColumnpmIntervalTxUnicastFrames | read-only | current | The amount of unicast frames transmitted OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.26 | ColumnpmIntervalTxMulticastFrames | read-only | current | The amount of multicast frames transmitted OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.27 | ColumnpmIntervalTxBroadcastFrames | read-only | current | The amount of broadcast frames transmitted OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.28 | ColumnpmIntervalRxOctets | read-only | current | The amount of octets received OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.29 | ColumnpmIntervalRxFrames | read-only | current | The amount of frames received OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.30 | ColumnpmIntervalRxUnicastFrames | read-only | current | The amount of unicast frames received OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.31 | ColumnpmIntervalRxMulticastFrames | read-only | current | The amount of multicast frames received OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.32 | ColumnpmIntervalRxBroadcastFrames | read-only | current | The amount of broadcast frames received OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.33 | ColumnpmIntervalIngressGreenFrameCount | read-only | current | The amount of green frames sent by the ingress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.34 | ColumnpmIntervalIngressYellowFrameCount | read-only | current | The amount of yellow frames sent by the ingress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.35 | ColumnpmIntervalIngressRedFrameCount | read-only | current | The amount of red frames sent by the ingress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.36 | ColumnpmIntervalIngressGreenOctetCount | read-only | current | The amount of green octets sent by the ingress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.37 | ColumnpmIntervalIngressYellowOctetCount | read-only | current | The amount of yellow octets sent by the ingress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.38 | ColumnpmIntervalIngressRedOctetCount | read-only | current | The amount of red octects sent by the ingress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.39 | ColumnpmIntervalEgressGreenFrameCount | read-only | current | The amount of green frames received by the egress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.40 | ColumnpmIntervalEgressGreenOctetCount | read-only | current | The amount of green octets received by the egress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.41 | ColumnpmIntervalGreenFrameDiscards | read-only | current | The amount of green frames discarded due to congestion during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.42 | ColumnpmIntervalYellowFrameDiscards | read-only | current | The amount of yellow frames discarded due to congestion during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.43 | ColumnpmIntervalGreenOctetDiscards | read-only | current | The amount of green octets discarded due to congestion during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.44 | ColumnpmIntervalYellowOctetDiscards | read-only | current | The amount of yellow octets discarded due to congestion during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.45 | ColumnpmIntervalTwoWayFrameDelay | read-only | current | The time required to transmit a service frame from source to destination during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.46 | ColumnpmIntervalTwoWayFrameDelayVariation | read-only | current | The difference in delay between two service frames during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.47 | ColumnpmIntervalFrameLossRatioNearEnd | read-only | current | The number of service frames not delivered divided by the total number of service frames at near end during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.48 | ColumnpmIntervalFrameLossRatioFarEnd | read-only | current | The number of service frames not delivered divided by the total number of service frames at far end during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.49 | ColumnpmIntervalUnavailabilityNearEnd | read-only | current | The @todo during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.50 | ColumnpmIntervalUnavailabilityFarEnd | read-only | current | The @todo during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.51 | ColumnpmIntervalOneWayFrameDelayVariation | read-only | current | The difference in delay between two service frames during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.52 | ColumnpmIntervalTxEthMaxUtilization | read-only | current | The maximum layer 2 bandwidth utilization of the transmitted ethernet signal during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.53 | ColumnpmIntervalRxEthMaxUtilization | read-only | current | The maximum layer 2 bandwidth utilization of the received ethernet signal during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.54 | ColumnpmIntervalStartTime | read-only | current | The start time of the quarter where PM-reports are generated |
| 1.3.6.1.4.1.8708.2.15.2.2.1.1.55 | ColumnpmIntervalStopTime | read-only | current | The end time of the quarter where PM-reports are generated |
| 1.3.6.1.4.1.8708.2.15.2.3 | NodepmInterval24h | |||
| 1.3.6.1.4.1.8708.2.15.2.3.1 | TablepmInterval24hTable | not-accessible | deprecated | The line tx 24 hour interval table. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1 | RowpmInterval24hEntry | not-accessible | deprecated | An entry in the interval table. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.1 | ColumnpmInterval24hSubrack | read-only | current | The subrack number for the interface in question. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.2 | ColumnpmInterval24hSlot | read-only | current | The slot number for the interface in question. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.3 | ColumnpmInterval24hPort | read-only | current | The port number for the interface in question. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.4 | ColumnpmInterval24hNumber | read-only | current | A number between 1 and 40, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.5 | ColumnpmInterval24hIsSuspect | read-only | current | This variable indicates if the data for this interval is suspect. The interval may for example contain measurements for a part of the interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.6 | ColumnpmInterval24hRxES | read-only | current | The counter associated with the number of Errored Seconds in a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.7 | ColumnpmInterval24hRxSES | read-only | current | The counter associated with the number of Severely Errored Seconds in a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.8 | ColumnpmInterval24hRxBBE | read-only | current | The counter associated with the number of Background Block Errors in a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.9 | ColumnpmInterval24hRxUAS | read-only | current | The counter associated with the number of Unavailable Seconds in a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.10 | ColumnpmInterval24hTxES | read-only | current | The counter associated with the number of Errored Seconds in a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.11 | ColumnpmInterval24hTxSES | read-only | current | The counter associated with the number of Severely Errored Seconds in a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.12 | ColumnpmInterval24hTxBBE | read-only | current | The counter associated with the number of Background Block Errors in a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.13 | ColumnpmInterval24hTxUAS | read-only | current | The counter associated with the number of Unavailable Seconds in a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.14 | ColumnpmInterval24hName | read-only | current | The name of the interface. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.15 | ColumnpmInterval24hRxPowerLevel | read-only | current | The received power level in units of 0.1 dBm sampled some time during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.16 | ColumnpmInterval24hGbeMaxUtilization | read-only | current | The maximum bandwidth utilization of the GbE signal during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.17 | ColumnpmInterval24hTxPowerLevel | read-only | current | The transmitted power level in units of 0.1 dBm sampled some time during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.18 | ColumnpmInterval24hRxUndersizedFrames | read-only | current | The amount of undersized frames during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.19 | ColumnpmInterval24hRxOversizedFrames | read-only | current | The amount of oversized frames during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.20 | ColumnpmInterval24hRxFragments | read-only | current | The amount of fragments during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.21 | ColumnpmInterval24hRxFcsErrors | read-only | current | The amount of frames with FCS or alignment errors during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.22 | ColumnpmInterval24hRxInvalidCeVlanId | read-only | current | The amount of frames with invalid CE-VLAN id during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.23 | ColumnpmInterval24hTxOctets | read-only | current | The amount of octets transmitted OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.24 | ColumnpmInterval24hTxFrames | read-only | current | The amount of frames transmitted OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.25 | ColumnpmInterval24hTxUnicastFrames | read-only | current | The amount of unicast frames transmitted OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.26 | ColumnpmInterval24hTxMulticastFrames | read-only | current | The amount of multicast frames transmitted OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.27 | ColumnpmInterval24hTxBroadcastFrames | read-only | current | The amount of multicast frames transmitted OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.28 | ColumnpmInterval24hRxOctets | read-only | current | The amount of octets received OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.29 | ColumnpmInterval24hRxFrames | read-only | current | The amount of frames received OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.30 | ColumnpmInterval24hRxUnicastFrames | read-only | current | The amount of unicast frames received OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.31 | ColumnpmInterval24hRxMulticastFrames | read-only | current | The amount of multicast frames received OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.32 | ColumnpmInterval24hRxBroadcastFrames | read-only | current | The amount of broadcast frames received OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.33 | ColumnpmInterval24hIngressGreenFrameCount | read-only | current | The amount of green frames sent by ingress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.34 | ColumnpmInterval24hIngressYellowFrameCount | read-only | current | The amount of yellow frames sent by ingress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.35 | ColumnpmInterval24hIngressRedFrameCount | read-only | current | The amount of red frames sent by ingress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.36 | ColumnpmInterval24hIngressGreenOctetCount | read-only | current | The amount of green octets sent by ingress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.37 | ColumnpmInterval24hIngressYellowOctetCount | read-only | current | The amount of yellow octets sent by ingress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.38 | ColumnpmInterval24hIngressRedOctetCount | read-only | current | The amount of red octets sent by ingress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.39 | ColumnpmInterval24hEgressGreenFrameCount | read-only | current | The amount of green frames received by egress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.40 | ColumnpmInterval24hEgressGreenOctetCount | read-only | current | The amount of green octets received by egress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.41 | ColumnpmInterval24hGreenFrameDiscards | read-only | current | The amount of green frames discarded due to congestion during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.42 | ColumnpmInterval24hYellowFrameDiscards | read-only | current | The amount of yellow frames discarded due to congestion during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.43 | ColumnpmInterval24hGreenOctetDiscards | read-only | current | The amount of green octets discarded due to congestion during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.44 | ColumnpmInterval24hYellowOctetDiscards | read-only | current | The amount of yellow octets discarded due to congestion during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.45 | ColumnpmInterval24hTwoWayFrameDelay | read-only | current | The time required to transmit a service frame from source to destination during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.46 | ColumnpmInterval24hTwoWayFrameDelayVariation | read-only | current | The difference in delay of two service frames during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.47 | ColumnpmInterval24hFrameLossRatioNearEnd | read-only | current | The number of service frames not delivered divided by the total number of service frames at near end during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.48 | ColumnpmInterval24hFrameLossRatioFarEnd | read-only | current | The number of service frames not delivered divided by the total number of service frames at far end during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.49 | ColumnpmInterval24hUnavailabilityNearEnd | read-only | current | The @todo during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.50 | ColumnpmInterval24hUnavailabilityFarEnd | read-only | current | The @todo during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.51 | ColumnpmInterval24hOneWayFrameDelayVariation | read-only | current | The difference in delay of two service frames during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.52 | ColumnpmInterval24hTxEthMaxUtilization | read-only | current | The maximum layer 2 bandwidth utilization of the transmitted ethernet signal during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.53 | ColumnpmInterval24hRxEthMaxUtilization | read-only | current | The maximum layer 2 bandwidth utilization of the received ethernet signal during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.54 | ColumnpmInterval24hStartTime | read-only | current | The start time of the quarter where PM-reports are generated |
| 1.3.6.1.4.1.8708.2.15.2.3.1.1.55 | ColumnpmInterval24hStopTime | read-only | current | The end time of the quarter where PM-reports are generated |
| 1.3.6.1.4.1.8708.2.15.2.4 | NodelumentisPmNotifications | |||
| 1.3.6.1.4.1.8708.2.15.2.4.0 | NodepmNotifyPrefix | |||
| 1.3.6.1.4.1.8708.2.15.2.4.0.1 | NotificationpmFileAdded | current | Sent when a new 15 minute interval log file is available. | |
| 1.3.6.1.4.1.8708.2.15.2.4.0.2 | NotificationpmFile24hAdded | current | Sent when a new 24 hour interval log file is available. | |
| 1.3.6.1.4.1.8708.2.15.2.5 | NodepmFile | |||
| 1.3.6.1.4.1.8708.2.15.2.5.1 | TablepmFileTable | not-accessible | current | The line tx 15 min interval table. |
| 1.3.6.1.4.1.8708.2.15.2.5.1.1 | RowpmFileEntry | not-accessible | current | An entry in the 15 minute log file table. |
| 1.3.6.1.4.1.8708.2.15.2.5.1.1.1 | ColumnpmFileIndex | read-only | current | A number which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed interval, and … |
| 1.3.6.1.4.1.8708.2.15.2.5.1.1.2 | ColumnpmFileName | read-only | current | The name of the file. |
| 1.3.6.1.4.1.8708.2.15.2.5.1.1.3 | ColumnpmFileCreatedTime | read-only | current | The time when the file was created. |
| 1.3.6.1.4.1.8708.2.15.2.5.1.1.4 | ColumnpmFileSeqNumber | read-only | current | The last sequence number used when issuing a notification for this file. |
| 1.3.6.1.4.1.8708.2.15.2.5.1.1.5 | ColumnpmFileStartTime | read-only | current | The time when collection started for this file. |
| 1.3.6.1.4.1.8708.2.15.2.5.1.1.6 | ColumnpmFileStopTime | read-only | current | The time when collection stopped for this file. |
| 1.3.6.1.4.1.8708.2.15.2.5.1.1.7 | ColumnpmFileUrl | read-only | current | The full path indicating where the file can be found on the network element. |
| 1.3.6.1.4.1.8708.2.15.2.6 | NodepmIfList | |||
| 1.3.6.1.4.1.8708.2.15.2.6.1 | TablepmIfTable | not-accessible | current | The pm interface table. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1 | RowpmIfEntry | not-accessible | current | An entry in interface table. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.1 | ColumnpmIfIndex | read-only | current | An arbitrary index assigned to each if entry. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.2 | ColumnpmIfName | read-only | current | The management name of the interface, for example 'mrt:1:2:1-2'. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.3 | ColumnpmIfSubrack | read-create | current | The number of the subrack where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.4 | ColumnpmIfSlot | read-create | current | The number of the slot where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.5 | ColumnpmIfPort | read-create | current | The number of the TX port for the interface. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.6 | ColumnpmIfPmReportMode | read-write | current | The mode PM reporting on the interface. off - PM reporting is inactive. on - PM reporting is activated. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.7 | ColumnpmIfRxCurrentES | read-only | current | The counter associated with the number of Errored Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.8 | ColumnpmIfRxCurrentSES | read-only | current | The counter associated with the number of Severely Errored Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.9 | ColumnpmIfRxCurrentBBE | read-only | current | The counter associated with the number of Background Block Errors in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.10 | ColumnpmIfRxCurrentUAS | read-only | current | The counter associated with the number of Unavailable Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.11 | ColumnpmIfTxCurrentES | read-only | current | The counter associated with the number of Errored Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.12 | ColumnpmIfTxCurrentSES | read-only | current | The counter associated with the number of Severely Errored Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.13 | ColumnpmIfTxCurrentBBE | read-only | current | The counter associated with the number of Background Block Errors in in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.14 | ColumnpmIfTxCurrentUAS | read-only | current | The counter associated with the number of Unavailable Seconds encountered in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.15 | ColumnpmIfRx24hCurrentES | read-only | current | The counter associated with the number of Errored Seconds in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.16 | ColumnpmIfRx24hCurrentSES | read-only | current | The counter associated with the number of Severely Errored Seconds in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.17 | ColumnpmIfRx24hCurrentBBE | read-only | current | The counter associated with the number of Background Block Errors in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.18 | ColumnpmIfRx24hCurrentUAS | read-only | current | The counter associated with the number of Unavailable Seconds encountered in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.19 | ColumnpmIfTx24hCurrentES | read-only | current | The counter associated with the number of Errored Seconds in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.20 | ColumnpmIfTx24hCurrentSES | read-only | current | The counter associated with the number of Severely Errored Seconds in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.21 | ColumnpmIfTx24hCurrentBBE | read-only | current | The counter associated with the number of Background Block Errors in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.22 | ColumnpmIfTx24hCurrentUAS | read-only | current | The counter associated with the number of Unavailable Seconds encountered in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.23 | ColumnpmIfRxESThreshold | read-write | current | Sets the threshold in seconds for the errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.24 | ColumnpmIfRxSESThreshold | read-write | current | Sets the threshold in seconds for the severely errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.25 | ColumnpmIfRxBBEThreshold | read-write | current | Sets the threshold in seconds for the background block errors alarms. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.26 | ColumnpmIfRxUASThreshold | read-write | current | Sets the threshold in seconds for the unavailable seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.27 | ColumnpmIfTxESThreshold | read-write | current | Sets the threshold in seconds for the errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.28 | ColumnpmIfTxSESThreshold | read-write | current | Sets the threshold in seconds for the severely errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.29 | ColumnpmIfTxBBEThreshold | read-write | current | Sets the threshold in seconds for the background block errors alarms. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.30 | ColumnpmIfTxUASThreshold | read-write | current | Sets the threshold in seconds for the unavailable seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.31 | ColumnpmIfRx24hESThreshold | read-write | current | Sets the threshold in seconds for the errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.32 | ColumnpmIfRx24hSESThreshold | read-write | current | Sets the threshold in seconds for the severely errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.33 | ColumnpmIfRx24hBBEThreshold | read-write | current | Sets the threshold in seconds for the background block errors alarms. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.34 | ColumnpmIfRx24hUASThreshold | read-write | current | Sets the threshold in seconds for the unavailable seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.35 | ColumnpmIfTx24hESThreshold | read-write | current | Sets the threshold in seconds for the errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.36 | ColumnpmIfTx24hSESThreshold | read-write | current | Sets the threshold in seconds for the severely errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.37 | ColumnpmIfTx24hBBEThreshold | read-write | current | Sets the threshold in seconds for the background block errors alarms. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.38 | ColumnpmIfTx24hUASThreshold | read-write | current | Sets the threshold in seconds for the unavailable seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.39 | ColumnpmIfRxES | read-only | current | Errored seconds (ES) Rx 15 min threshold exceeded. A: The number of errored seconds during a period exceeds the associated threshold. D: At the start of a new … |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.40 | ColumnpmIfRxSES | read-only | current | Severely errored seconds (SES) Rx 15 min threshold exceeded. A: The number of severely errored seconds during a period exceeds the associated threshold. D: At … |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.41 | ColumnpmIfRxBBE | read-only | current | Background block errors (BBE) Rx 15 min threshold exceeded. A: The number of background block errors during a period exceeds the associated threshold. D: At th… |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.42 | ColumnpmIfRxUAS | read-only | current | Unavailable seconds (UAS) Rx 15 min threshold exceeded. A: The number of unavailable seconds during a period exceeds the associated threshold. D: At the start … |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.43 | ColumnpmIfTxES | read-only | current | Errored seconds (ES) Tx 15 min threshold exceeded. A: The number of errored seconds during a period exceeds the associated threshold. D: At the start of a new … |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.44 | ColumnpmIfTxSES | read-only | current | Severely errored seconds (SES) Tx 15 min threshold exceeded. A: The number of severely errored seconds during a period exceeds the associated threshold. D: At … |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.45 | ColumnpmIfTxBBE | read-only | current | Background block errors (BBE) Tx 15 min threshold exceeded. A: The number of background block errors during a period exceeds the associated threshold. D: At th… |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.46 | ColumnpmIfTxUAS | read-only | current | Unavailable seconds (UAS) Tx 15 min threshold exceeded. A: The number of unavailable seconds during a period exceeds the associated threshold. D: At the start … |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.47 | ColumnpmIfRx24hES | read-only | current | Errored seconds (ES) Rx 24 hour threshold exceeded. A: The number of errored seconds during a period exceeds the associated threshold. D: At the start of a new… |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.48 | ColumnpmIfRx24hSES | read-only | current | Severely errored seconds (SES) Rx 24 hour threshold exceeded. A: The number of severely errored seconds during a period exceeds the associated threshold. D: At… |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.49 | ColumnpmIfRx24hBBE | read-only | current | Background block errors (BBE) Rx 24 hour threshold exceeded. A: The number of background block errors during a period exceeds the associated threshold. D: At t… |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.50 | ColumnpmIfRx24hUAS | read-only | current | Unavailable seconds (UAS) Rx 24 hour threshold exceeded. A: The number of unavailable seconds during a period exceeds the associated threshold. D: At the start… |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.51 | ColumnpmIfTx24hES | read-only | current | Errored seconds Tx (ES) 24 hour threshold exceeded. A: The number of errored seconds during a period exceeds the associated threshold. D: At the start of a new… |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.52 | ColumnpmIfTx24hSES | read-only | current | Severely errored seconds (SES) Tx 24 hour threshold exceeded. A: The number of severely errored seconds during a period exceeds the associated threshold. D: At… |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.53 | ColumnpmIfTx24hBBE | read-only | current | Background block errors (BBE) Tx 24 hour threshold exceeded. A: The number of background block errors during a period exceeds the associated threshold. D: At t… |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.54 | ColumnpmIfTx24hUAS | read-only | current | Unavailable seconds (UAS) Tx 24 hour threshold exceeded. A: The number of unavailable seconds during a period exceeds the associated threshold. D: At the start… |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.55 | ColumnpmIfRxPort | read-create | current | The number of the RX port for the interface. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.56 | ColumnpmIfReset15Min | read-write | current | Reset the 15 minute PM counters for the interface. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset15… |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.57 | ColumnpmIfReset24H | read-write | current | Reset the 24 hour PM counters for the interface. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset24h … |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.58 | ColumnpmIfAdminStatus | read-write | current | Administrative state for the PM object. down - Alarms are not sent. up - Alarms are sent service - Alarms are not sent |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.59 | ColumnpmIfOperStatus | read-only | current | The operational state for the PM object. notPresent - The physical resource is not available. down - The object is disabled. up - The object is enabled. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.60 | ColumnpmIfIsSuspect15Min | read-only | current | This variable indicates if the data for this interface is suspect. The current interval may for example contain measurements for a part of the interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.61 | ColumnpmIfIsSuspect24H | read-only | current | This variable indicates if the data for this interface is suspect. The current interval may for example contain measurements for a part of the interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.62 | ColumnpmIfInstallCommand | read-only | current | Generic command to perform installation tasks. Tasks: rxPower - measure the received power |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.63 | ColumnpmIfRxPowerLevel | read-only | current | The received power level in units of 0.1 dBm |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.64 | ColumnpmIfInitialPowerLevel | read-create | current | The received power level in units of 0.1 dBm measured at installation of the link. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.65 | ColumnpmIfRxGbeMaxUtilization | read-only | current | The maximum bandwidth utilization of the ethernet signal during the current 15 min interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.66 | ColumnpmIfRx24hGbeMaxUtilization | read-only | current | The maximum bandwidth utilization of the ethernet signal during the current 24 h interval. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.67 | ColumnpmIfTxPowerLevel | read-only | current | The transmitted power level in units of 0.1 dBm |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.68 | ColumnpmIfObjectProperty | read-only | current | Property mask. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.69 | ColumnpmIfDelay | read-only | current | The delay of the signal. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.70 | ColumnpmIfRxBEREstimation | read-only | current | The estimated Bit Error Rate after FEC. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.71 | ColumnpmIfIfNo | read-create | current | The interface number of the port. |
| 1.3.6.1.4.1.8708.2.15.2.6.1.1.72 | ColumnpmIfUpPortId | read-create | current | Internal port reference for traffic unit. |
| 1.3.6.1.4.1.8708.2.15.2.7 | NodepmLogGeneral | |||
| 1.3.6.1.4.1.8708.2.15.2.7.1 | ScalarpmLogGeneralLastChangeTime | read-only | current | The time when the PM log was last changed. |
| 1.3.6.1.4.1.8708.2.15.2.7.2 | ScalarpmLogGeneralSize | read-write | current | Number of logged 15 minute intervals. |
| 1.3.6.1.4.1.8708.2.15.2.7.3 | ScalarpmLogGeneralSize24h | read-write | current | Number of logged 24 hour intervals. |
| 1.3.6.1.4.1.8708.2.15.2.7.4 | ScalarpmLogGeneralFileTableSize | read-only | current | Number of rows available in the 15 minute file table. |
| 1.3.6.1.4.1.8708.2.15.2.7.5 | ScalarpmLogGeneralFile24hTableSize | read-only | current | Number of rows available in the 24 hour file table. |
| 1.3.6.1.4.1.8708.2.15.2.7.6 | ScalarpmLogGeneralInterval15mTableSize | read-only | deprecated | Number of rows available in the 15 minute interval table. |
| 1.3.6.1.4.1.8708.2.15.2.7.7 | ScalarpmLogGeneralInterval24hTableSize | read-only | deprecated | Number of rows available in the 24 hour interval table. |
| 1.3.6.1.4.1.8708.2.15.2.7.8 | ScalarpmLogGeneralInterval15mShowNonZeroOnly | read-write | deprecated | Show only non zero intervals. |
| 1.3.6.1.4.1.8708.2.15.2.7.9 | ScalarpmLogGeneralInterval24hShowNonZeroOnly | read-write | deprecated | Show only non zero intervals. |
| 1.3.6.1.4.1.8708.2.15.2.7.10 | ScalarpmLogGeneralFile15mLastSeqNumber | read-only | current | Last sequence number for 15 minute files. |
| 1.3.6.1.4.1.8708.2.15.2.7.11 | ScalarpmLogGeneralFile24hLastSeqNumber | read-only | current | Last sequence number for the 24 hour files. |
| 1.3.6.1.4.1.8708.2.15.2.8 | NodepmFile24h | |||
| 1.3.6.1.4.1.8708.2.15.2.8.1 | TablepmFile24hTable | not-accessible | current | The line tx 24 hour interval table. |
| 1.3.6.1.4.1.8708.2.15.2.8.1.1 | RowpmFile24hEntry | not-accessible | current | An entry in the 24 hour log file table. |
| 1.3.6.1.4.1.8708.2.15.2.8.1.1.1 | ColumnpmFile24hIndex | read-only | current | A number which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed interval, and … |
| 1.3.6.1.4.1.8708.2.15.2.8.1.1.2 | ColumnpmFile24hName | read-only | current | The name of the file. |
| 1.3.6.1.4.1.8708.2.15.2.8.1.1.3 | ColumnpmFile24hCreatedTime | read-only | current | The time when the file was created. |
| 1.3.6.1.4.1.8708.2.15.2.8.1.1.4 | ColumnpmFile24hSeqNumber | read-only | current | The last sequence number used when issuing a notification for this file. |
| 1.3.6.1.4.1.8708.2.15.2.8.1.1.5 | ColumnpmFile24hStartTime | read-only | current | The time when collection started for this file. |
| 1.3.6.1.4.1.8708.2.15.2.8.1.1.6 | ColumnpmFile24hStopTime | read-only | current | The time when collection stopped for this file. |
| 1.3.6.1.4.1.8708.2.15.2.8.1.1.7 | ColumnpmFile24hUrl | read-only | current | The full path indicating where the file can be found on the network element. |
| 1.3.6.1.4.1.8708.2.15.2.9 | NodepmControl | |||
| 1.3.6.1.4.1.8708.2.15.2.9.1 | ScalarpmControlReset15Min | read-write | current | Reset all 15 minute counters in the node. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset15m reset |
| 1.3.6.1.4.1.8708.2.15.2.9.2 | ScalarpmControlReset24H | read-write | current | Reset all 24 hour counters in the node. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset24h reset |
| 1.3.6.1.4.1.8708.2.15.2.9.3 | ScalarpmControlResetCont | read-write | current | Reset all continuous (free running) counters in the node. After a successful reset the default value (normal) is restored in this action attribute. Usage: set … |
| 1.3.6.1.4.1.8708.2.15.2.10 | NodepmEthTdList | |||
| 1.3.6.1.4.1.8708.2.15.2.10.1 | TablepmEthTdTable | not-accessible | current | The pm interface table. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1 | RowpmEthTdEntry | not-accessible | current | An entry in interface table. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.1 | ColumnpmEthTdIndex | read-only | current | An arbitrary index assigned to each if entry. The index is read-only and persistent, i.e the index is kept over reboot and backed up by stable storage. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.2 | ColumnpmEthTdName | read-only | current | The management name of the interface, for example 'mrt:1:2:1-2'. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.3 | ColumnpmEthTdSubrack | read-create | current | The number of the subrack where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.4 | ColumnpmEthTdSlot | read-create | current | The number of the slot where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.5 | ColumnpmEthTdPort | read-create | current | The number of the Tx port for the interface. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.6 | ColumnpmEthTdPmReportMode | read-write | current | The mode PM reporting on the interface. off - PM reporting is inactive. on - PM reporting is activated. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.7 | ColumnpmEthTdRxPort | read-create | current | The number of the Rx port for the interface. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.8 | ColumnpmEthTdReset15Min | read-write | current | Reset the 15 minute PM counters for the interface. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset15… |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.9 | ColumnpmEthTdReset24H | read-write | current | Reset the 24 hour PM counters for the interface. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset24h … |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.10 | ColumnpmEthTdAdminStatus | read-write | current | Administrative state for the PM object. down - Alarms are not sent. up - Alarms are sent service - Alarms are not sent |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.11 | ColumnpmEthTdOperStatus | read-only | current | The operational state for the PM object. notPresent - The physical resource is not available. down - The object is disabled. up - The object is enabled. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.12 | ColumnpmEthTdIsSuspect15Min | read-only | current | This variable indicates if the data for this interface is suspect. The current interval may for example contain measurements for a part of the interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.13 | ColumnpmEthTdIsSuspect24h | read-only | current | This variable indicates if the data for this interface is suspect. The current interval may for example contain measurements for a part of the interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.14 | ColumnpmEthTdCurrentRxUndersizedFrames | read-only | current | The amount of undersized frames during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.15 | ColumnpmEthTdCurrentRxOversizedFrames | read-only | current | The amount of oversized frames during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.16 | ColumnpmEthTdCurrentRxFragments | read-only | current | The amount of fragments during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.17 | ColumnpmEthTdCurrentRxFcsErrors | read-only | current | The amount of frames with FCS or alignment errors during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.18 | ColumnpmEthTdCurrentRxInvalidCeVlanId | read-only | current | The amount of frames with invalid CE-VLAN id during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.19 | ColumnpmEthTdCurrentTxOctets | read-only | current | The amount of octets transmitted OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.20 | ColumnpmEthTdCurrentTxFrames | read-only | current | The amount of frames transmitted OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.21 | ColumnpmEthTdCurrentTxUnicastFrames | read-only | current | The amount of unicast frames transmitted OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.22 | ColumnpmEthTdCurrentTxMulticastFrames | read-only | current | The amount of multicast frames transmitted OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.23 | ColumnpmEthTdCurrentTxBroadcastFrames | read-only | current | The amount of broadcast frames transmitted OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.24 | ColumnpmEthTdCurrentRxOctets | read-only | current | The amount of octets received OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.25 | ColumnpmEthTdCurrentRxFrames | read-only | current | The amount of frames received OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.26 | ColumnpmEthTdCurrentRxUnicastFrames | read-only | current | The amount of unicast frames received OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.27 | ColumnpmEthTdCurrentRxMulticastFrames | read-only | current | The amount of multicast frames received OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.28 | ColumnpmEthTdCurrentRxBroadcastFrames | read-only | current | The amount of broadcast frames received OK during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.29 | ColumnpmEthTdCurrent24hRxUndersizedFrames | read-only | current | The amount of undersized frames during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.30 | ColumnpmEthTdCurrent24hRxOversizedFrames | read-only | current | The amount of oversized frames during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.31 | ColumnpmEthTdCurrent24hRxFragments | read-only | current | The amount of fragments during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.32 | ColumnpmEthTdCurrent24hRxFcsErrors | read-only | current | The amount of frames with FCS or alignment errors during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.33 | ColumnpmEthTdCurrent24hRxInvalidCeVlanId | read-only | current | The amount of frames with invalid CE-VLAN id during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.34 | ColumnpmEthTdCurrent24hTxOctets | read-only | current | The amount of octets transmitted OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.35 | ColumnpmEthTdCurrent24hTxFrames | read-only | current | The amount of frames transmitted OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.36 | ColumnpmEthTdCurrent24hTxUnicastFrames | read-only | current | The amount of unicast frames transmitted OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.37 | ColumnpmEthTdCurrent24hTxMulticastFrames | read-only | current | The amount of multicast frames transmitted OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.38 | ColumnpmEthTdCurrent24hTxBroadcastFrames | read-only | current | The amount of broadcast frames transmitted OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.39 | ColumnpmEthTdCurrent24hRxOctets | read-only | current | The amount of octets received OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.40 | ColumnpmEthTdCurrent24hRxFrames | read-only | current | The amount of frames received OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.41 | ColumnpmEthTdCurrent24hRxUnicastFrames | read-only | current | The amount of unicast frames received OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.42 | ColumnpmEthTdCurrent24hRxMulticastFrames | read-only | current | The amount of multicast frames received OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.43 | ColumnpmEthTdCurrent24hRxBroadcastFrames | read-only | current | The amount of broadcast frames received OK during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.44 | ColumnpmEthTdObjectProperty | read-only | current | Property mask. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.45 | ColumnpmEthTdRxUndersizedFramesThreshold | read-write | current | Sets the threshold for the alarm, (in no. of frames). Default value 10 |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.46 | ColumnpmEthTdRxOversizedFramesThreshold | read-write | current | Sets the threshold for the alarm, (in no. of frames). Default value 10 |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.47 | ColumnpmEthTdRxFragmentsThreshold | read-write | current | Sets the threshold for the alarm, (in no. of frames). Default value 10 |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.48 | ColumnpmEthTdRxFcsErrorsThreshold | read-write | current | Sets the threshold for the alarm, (in no. of frames). Default value 10 |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.49 | ColumnpmEthTdRxInvalidCeVlanIdThreshold | read-write | current | Sets the threshold for the alarm, (in no. of frames). Default value 10 A value of 0 (zero) will disable the alarm. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.50 | ColumnpmEthTd24hRxUndersizedFramesThreshold | read-write | current | Sets the threshold for the alarm, (in no. of frames). Default value 10 |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.51 | ColumnpmEthTd24hRxOversizedFramesThreshold | read-write | current | Sets the threshold for the alarm, (in no. of frames). Default value 10 |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.52 | ColumnpmEthTd24hRxFragmentsThreshold | read-write | current | Sets the threshold for the alarm, (in no. of frames). Default value 10 |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.53 | ColumnpmEthTd24hRxFcsErrorsThreshold | read-write | current | Sets the threshold for the alarm, (in no. of frames). Default value 10 |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.54 | ColumnpmEthTd24hRxInvalidCeVlanIdThreshold | read-write | current | Sets the threshold for the alarm, (in no. of frames). Default value 10 A value of 0 (zero) will disable the alarm. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.55 | ColumnpmEthTdRxUndersizedFrames | read-only | current | Rx undersized frames threshold exceeded. A: The number of undersized frames during a period exceeds the associated threshold. D: At the start of a new 15 minut… |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.56 | ColumnpmEthTdRxOversizedFrames | read-only | current | Rx oversized frames threshold exceeded. A: The number of oversized frames during a period exceeds the associated threshold. D: At the start of a new 15 minute … |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.57 | ColumnpmEthTdRxFragments | read-only | current | Rx fragments threshold exceeded. A: The number of fragmented frames during a period exceeds the associated threshold. D: At the start of a new 15 minute period… |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.58 | ColumnpmEthTdRxFcsErrors | read-only | current | Rx FCS errors threshold exceeded. A: The number of FCS or alignment errors during a period exceeds the associated threshold. D: At the start of a new 15 minute… |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.59 | ColumnpmEthTdRxInvalidCeVlanId | read-only | current | Rx invalid CE VLAN id threshold exceeded. A: The number of invalid CE VLAN id during a period exceeds the associated threshold. D: At the start of a new 15 min… |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.60 | ColumnpmEthTd24hRxUndersizedFrames | read-only | current | Rx undersized frames 24h threshold exceeded. A: The number of undersized frames during a period exceeds the associated threshold. D: At the start of a new 24 h… |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.61 | ColumnpmEthTd24hRxOversizedFrames | read-only | current | Rx oversized frames 24h threshold exceeded. A: The number of oversized frames during a period exceeds the associated threshold. D: At the start of a new 24 hou… |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.62 | ColumnpmEthTd24hRxFragments | read-only | current | Rx fragments 24h threshold exceeded. A: The number of fragmented frames during a period exceeds the associated threshold. D: At the start of a new 24 hour peri… |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.63 | ColumnpmEthTd24hRxFcsErrors | read-only | current | Rx FCS errors 24h threshold exceeded. A: The number of FCS or alignment errors during a period exceeds the associated threshold. D: At the start of a new 24 ho… |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.64 | ColumnpmEthTd24hRxInvalidCeVlanId | read-only | current | Rx invalid CE VLAN id 24h threshold exceeded. A: The number of invalid CE VLAN id during a period exceeds the associated threshold. D: At the start of a new 24… |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.65 | ColumnpmEthTdCurrentTxEthMaxUtilization | read-only | current | The maximum layer 2 bandwidth utilization of the ethernet signal during the current 15 min interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.66 | ColumnpmEthTdCurrentRxEthMaxUtilization | read-only | current | The maximum layer 2 bandwidth utilization of the ethernet signal during the current 15 min interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.67 | ColumnpmEthTdCurrent24hTxEthMaxUtilization | read-only | current | The maximum layer 2 bandwidth utilization of the ethernet signal during the current 24 h interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.68 | ColumnpmEthTdCurrent24hRxEthMaxUtilization | read-only | current | The maximum layer 2 bandwidth utilization of the ethernet signal during the current 24 h interval. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.69 | ColumnpmEthTdResetCont | read-write | current | Reset the free running PM counters for the interface. After a successful reset the default value (normal) is restored in this action attribute. Usage: set rese… |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.70 | ColumnpmEthTdCurrentContRxUndersizedFrames | read-only | current | The amount of undersized frames. Free running counter. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.71 | ColumnpmEthTdCurrentContRxOversizedFrames | read-only | current | The amount of oversized frames. Free running counter. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.72 | ColumnpmEthTdCurrentContRxFragments | read-only | current | The amount of fragments. Free running counter. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.73 | ColumnpmEthTdCurrentContRxFcsErrors | read-only | current | The amount of frames with FCS or alignment errors. Free running counter. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.74 | ColumnpmEthTdCurrentContRxInvalidCeVlanId | read-only | current | The amount of frames with invalid CE-VLAN id. Free running counter. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.75 | ColumnpmEthTdCurrentContTxOctets | read-only | current | The amount of octets transmitted OK. Free running counter. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.76 | ColumnpmEthTdCurrentContTxFrames | read-only | current | The amount of frames transmitted OK. Free running counter. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.77 | ColumnpmEthTdCurrentContTxUnicastFrames | read-only | current | The amount of unicast frames transmitted OK. Free running counter. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.78 | ColumnpmEthTdCurrentContTxMulticastFrames | read-only | current | The amount of multicast frames transmitted OK. Free running counter. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.79 | ColumnpmEthTdCurrentContTxBroadcastFrames | read-only | current | The amount of broadcast frames transmitted OK. Free running counter. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.80 | ColumnpmEthTdCurrentContRxOctets | read-only | current | The amount of octets received OK. Free running counter. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.81 | ColumnpmEthTdCurrentContRxFrames | read-only | current | The amount of frames received OK. Free running counter. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.82 | ColumnpmEthTdCurrentContRxUnicastFrames | read-only | current | The amount of unicast frames received OK. Free running counter. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.83 | ColumnpmEthTdCurrentContRxMulticastFrames | read-only | current | The amount of multicast frames received OK. Free running counter. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.84 | ColumnpmEthTdCurrentContRxBroadcastFrames | read-only | current | The amount of broadcast frames received OK. Free running counter. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.85 | ColumnpmEthTdVlanId | read-only | current | User specified VLAN ID, which is last number in the port device ID. If no VLAN ID is specified then VLAN ID -1 is assumed. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.86 | ColumnpmEthTdIfNo | read-create | current | The interface number of the port. |
| 1.3.6.1.4.1.8708.2.15.2.10.1.1.87 | ColumnpmEthTdUpPortId | read-create | current | Internal port reference for traffic unit. |
| 1.3.6.1.4.1.8708.2.15.2.11 | NodepmEthTmList | |||
| 1.3.6.1.4.1.8708.2.15.2.11.1 | TablepmEthTmTable | not-accessible | obsolete | The pm interface table. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1 | RowpmEthTmEntry | not-accessible | current | An entry in interface table. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.1 | ColumnpmEthTmIndex | read-only | current | An arbitrary index assigned to each if entry. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.2 | ColumnpmEthTmName | read-only | current | The management name of the interface, for example 'mrt:1:2:1-2'. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.3 | ColumnpmEthTmSubrack | read-only | current | The number of the subrack where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.4 | ColumnpmEthTmSlot | read-only | current | The number of the slot where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.5 | ColumnpmEthTmPort | read-only | current | The number of the TX port for the interface. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.6 | ColumnpmEthTmPmReportMode | read-write | current | The mode PM reporting on the interface. off - PM reporting is inactive. on - PM reporting is activated. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.7 | ColumnpmEthTmRxPort | read-only | current | The number of the RX port for the interface. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.8 | ColumnpmEthTmReset15Min | read-write | current | Reset the 15 minute PM counters for the interface. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset15… |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.9 | ColumnpmEthTmReset24H | read-write | current | Reset the 24 hour PM counters for the interface. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset24h … |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.10 | ColumnpmEthTmAdminStatus | read-write | current | Administrative state for the PM object. down - Alarms are not sent. up - Alarms are sent service - Alarms are not sent |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.11 | ColumnpmEthTmOperStatus | read-only | current | The operational state for the PM object. notPresent - The physical resource is not available. down - The object is disabled. up - The object is enabled. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.12 | ColumnpmEthTmIsSuspect15Min | read-only | current | This variable indicates if the data for this interface is suspect. The current interval may for example contain measurements for a part of the interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.13 | ColumnpmEthTmIsSuspect24h | read-only | current | This variable indicates if the data for this interface is suspect. The current interval may for example contain measurements for a part of the interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.14 | ColumnpmEthTmCurrentIngressGreenFrameCount | read-only | current | The amount of green frames sent by the ingress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.15 | ColumnpmEthTmCurrentIngressYellowFrameCount | read-only | current | The amount of yellow frames sent by the ingress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.16 | ColumnpmEthTmCurrentIngressRedFrameCount | read-only | current | The amount of red frames sent by the ingress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.17 | ColumnpmEthTmCurrentIngressGreenOctetCount | read-only | current | The amount of green octets sent by the ingress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.18 | ColumnpmEthTmCurrentIngressYellowOctetCount | read-only | current | The amount of yellow octets sent by the ingress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.19 | ColumnpmEthTmCurrentIngressRedOctetCount | read-only | current | The amount of red octets sent by the ingress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.20 | ColumnpmEthTmCurrentEgressGreenFrameCount | read-only | current | The amount of green frames received by the egress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.21 | ColumnpmEthTmCurrentEgressGreenOctetCount | read-only | current | The amount of green octets received by the egress UNI during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.22 | ColumnpmEthTmCurrentGreenFrameDiscards | read-only | current | The amount of green frames discarded due to congestion during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.23 | ColumnpmEthTmCurrentYellowFrameDiscards | read-only | current | The amount of yellow frames discarded due to congestion during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.24 | ColumnpmEthTmCurrentGreenOctetDiscards | read-only | current | The amount of green octets discarded due to congestion during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.25 | ColumnpmEthTmCurrentYellowOctetDiscards | read-only | current | The amount of yellow octets discarded due to congestion during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.26 | ColumnpmEthTmCurrent24hIngressGreenFrameCount | read-only | current | The amount of green frames sent by the ingress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.27 | ColumnpmEthTmCurrent24hIngressYellowFrameCount | read-only | current | The amount of yellow frames sent by the ingress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.28 | ColumnpmEthTmCurrent24hIngressRedFrameCount | read-only | current | The amount of red frames sent by the ingress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.29 | ColumnpmEthTmCurrent24hIngressGreenOctetCount | read-only | current | The amount of green octets sent by the ingress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.30 | ColumnpmEthTmCurrent24hIngressYellowOctetCount | read-only | current | The amount of yellow octets sent by the ingress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.31 | ColumnpmEthTmCurrent24hIngressRedOctetCount | read-only | current | The amount of red octets sent by the ingress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.32 | ColumnpmEthTmCurrent24hEgressGreenFrameCount | read-only | current | The amount of green frames received by the egress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.33 | ColumnpmEthTmCurrent24hEgressGreenOctetCount | read-only | current | The amount of green octets received by the egress UNI during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.34 | ColumnpmEthTmCurrent24hGreenFrameDiscards | read-only | current | The amount of green frames discarded due to congestion during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.35 | ColumnpmEthTmCurrent24hYellowFrameDiscards | read-only | current | The amount of yellow frames discarded due to congestion during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.36 | ColumnpmEthTmCurrent24hGreenOctetDiscards | read-only | current | The amount of green octets discarded due to congestion during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.37 | ColumnpmEthTmCurrent24hYellowOctetDiscards | read-only | current | The amount of yellow octets discarded due to congestion during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.38 | ColumnpmEthTmObjectProperty | read-only | current | Property mask. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.39 | ColumnpmEthTmInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.15.2.11.1.1.40 | ColumnpmEthTmIdentifier | read-create | current | Unique identifier for the EVC. |
| 1.3.6.1.4.1.8708.2.15.2.12 | NodepmEthOamList | |||
| 1.3.6.1.4.1.8708.2.15.2.12.1 | TablepmEthOamTable | not-accessible | obsolete | The pm interface table. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1 | RowpmEthOamEntry | not-accessible | current | An entry in interface table. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.1 | ColumnpmEthOamIndex | read-only | current | An arbitrary index assigned to each if entry. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.2 | ColumnpmEthOamName | read-only | current | The management name of the interface, for example 'mrt:1:2:1-2'. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.3 | ColumnpmEthOamSubrack | read-only | current | The number of the subrack where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.4 | ColumnpmEthOamSlot | read-only | current | The number of the slot where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.5 | ColumnpmEthOamPort | read-only | current | The number of the TX port for the interface. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.6 | ColumnpmEthOamPmReportMode | read-write | current | The mode PM reporting on the interface. off - PM reporting is inactive. on - PM reporting is activated. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.7 | ColumnpmEthOamRxPort | read-only | current | The number of the RX port for the interface. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.8 | ColumnpmEthOamReset15Min | read-write | current | Reset the 15 minute PM counters for the interface. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset15… |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.9 | ColumnpmEthOamReset24H | read-write | current | Reset the 24 hour PM counters for the interface. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset24h … |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.10 | ColumnpmEthOamAdminStatus | read-write | current | Administrative state for the PM object. down - Alarms are not sent. up - Alarms are sent service - Alarms are not sent |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.11 | ColumnpmEthOamOperStatus | read-only | current | The operational state for the PM object. notPresent - The physical resource is not available. down - The object is disabled. up - The object is enabled. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.12 | ColumnpmEthOamIsSuspect15Min | read-only | current | This variable indicates if the data for this interface is suspect. The current interval may for example contain measurements for a part of the interval. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.13 | ColumnpmEthOamIsSuspect24h | read-only | current | This variable indicates if the data for this interface is suspect. The current interval may for example contain measurements for a part of the interval. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.14 | ColumnpmEthOamCurrentTwoWayFrameDelay | read-only | current | The time requeired to transmit a service frame from source to destination during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.15 | ColumnpmEthOamCurrentTwoWayFrameDelayVariation | read-only | current | The difference in delay between two service frames during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.16 | ColumnpmEthOamCurrentFrameLossRatioNearEnd | read-only | current | The number of service frames not delivered divided by the total number of service frames at near end during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.17 | ColumnpmEthOamCurrentFrameLossRatioFarEnd | read-only | current | The number of service frames not delivered divided by the total number of service frames at far end during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.18 | ColumnpmEthOamCurrentUnavailabilityNearEnd | read-only | current | The @todo during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.19 | ColumnpmEthOamCurrentUnavailabilityFarEnd | read-only | current | The @todo during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.20 | ColumnpmEthOamCurrent24hTwoWayFrameDelay | read-only | current | The time required to transmit a servic frame source to destination during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.21 | ColumnpmEthOamCurrent24hTwoWayFrameDelayVariation | read-only | current | The difference in delay of two service frames during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.22 | ColumnpmEthOamCurrent24hFrameLossRatioNearEnd | read-only | current | The number of service frames not delivered divided by the total number of service frames at near end during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.23 | ColumnpmEthOamCurrent24hFrameLossRatioFarEnd | read-only | current | The number of service frames not delivered divided by the total number of service frames at far end during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.24 | ColumnpmEthOamCurrent24hUnavailabilityNearEnd | read-only | current | The @todo during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.25 | ColumnpmEthOamCurrent24hUnavailabilityFarEnd | read-only | current | The @todo during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.26 | ColumnpmEthOamObjectProperty | read-only | current | Property mask. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.27 | ColumnpmEthOamInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.28 | ColumnpmEthOamIdentifier | read-create | current | Unique identifier for the EVC. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.29 | ColumnpmEthOamUsedPercentOfFrames | read-write | current | . |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.30 | ColumnpmEthOamFrameLossRatioUnavailableThreshold | read-write | current | . |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.31 | ColumnpmEthOamCurrentOneWayFrameDelayVariation | read-only | current | The difference in delay between two service frames during a particular 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.12.1.1.32 | ColumnpmEthOamCurrent24hOneWayFrameDelayVariation | read-only | current | The difference in delay of two service frames during a particular 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.13 | NodepmEthDropList | |||
| 1.3.6.1.4.1.8708.2.15.2.13.1 | TablepmEthDropTable | not-accessible | current | The ethernet drop counters table. Each port has a number of continuous (free running) drop counters. The counters are reset when the traffic unit reboots or wh… |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1 | RowpmEthDropEntry | not-accessible | current | An entry in interface table. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.1 | ColumnpmEthDropIndex | read-only | current | An arbitrary index assigned to each if entry. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.2 | ColumnpmEthDropName | read-only | current | The management name of the interface, for example 'port:1:2:1-2'. (port:[subrack]:[slot]:[Tx port]-[Rx port]). |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.3 | ColumnpmEthDropSubrack | read-only | current | The number of the subrack where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.4 | ColumnpmEthDropSlot | read-only | current | The number of the slot where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.5 | ColumnpmEthDropPort | read-only | current | The number of the Tx port for the interface. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.6 | ColumnpmEthDropRxPort | read-only | current | The number of the Rx port for the interface. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.7 | ColumnpmEthDropResetCont | read-write | current | Reset the continuous (free running) drop counters. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset24… |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.8 | ColumnpmEthDropFrames | read-only | current | The total number of dropped continuous frames on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.9 | ColumnpmEthDropBytes | read-only | current | The total number of dropped continuous bytes on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.10 | ColumnpmEthDropYellowFrames | read-only | current | The total number of dropped continuous yellow frames on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.11 | ColumnpmEthDropRedFrames | read-only | current | The total number of dropped continuous red frames on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.12 | ColumnpmEthDropFramesQ1 | read-only | current | The number of dropped continuous frames for queue 1 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.13 | ColumnpmEthDropBytesQ1 | read-only | current | The number of dropped continuous bytes for queue 1 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.14 | ColumnpmEthDropFramesQ2 | read-only | current | The number of dropped continuous frames for queue 2 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.15 | ColumnpmEthDropBytesQ2 | read-only | current | The number of dropped continuous bytes for queue 2 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.16 | ColumnpmEthDropFramesQ3 | read-only | current | The number of dropped continuous frames for queue 3 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.17 | ColumnpmEthDropBytesQ3 | read-only | current | The number of dropped continuous bytes for queue 3 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.18 | ColumnpmEthDropFramesQ4 | read-only | current | The number of dropped continuous frames for queue 4 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.19 | ColumnpmEthDropBytesQ4 | read-only | current | The number of dropped continuous bytes for queue 4 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.20 | ColumnpmEthDropFramesQ5 | read-only | current | The number of dropped continuous frames for queue 5 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.21 | ColumnpmEthDropBytesQ5 | read-only | current | The number of dropped continuous bytes for queue 5 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.22 | ColumnpmEthDropFramesQ6 | read-only | current | The number of dropped continuous frames for queue 6 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.23 | ColumnpmEthDropBytesQ6 | read-only | current | The number of dropped continuous bytes for queue 6 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.24 | ColumnpmEthDropFramesQ7 | read-only | current | The number of dropped continuous frames for queue 7 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.25 | ColumnpmEthDropBytesQ7 | read-only | current | The number of dropped continuous bytes for queue 7 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.26 | ColumnpmEthDropFramesQ8 | read-only | current | The number of dropped continuous frames for queue 8 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.27 | ColumnpmEthDropBytesQ8 | read-only | current | The number of dropped continuous bytes for queue 8 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.28 | ColumnpmEthDropIfNo | read-only | current | The interface number of the port. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.29 | ColumnpmEthDropUpPortId | read-only | current | Internal port reference for traffic unit. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.30 | ColumnpmEthDropFrames15m | read-only | current | The number of dropped 15m frames on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.31 | ColumnpmEthDropBytes15m | read-only | current | The number of dropped 15m bytes on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.32 | ColumnpmEthDropYellowFrames15m | read-only | current | The number of dropped 15m yellow frames on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.33 | ColumnpmEthDropRedFrames15m | read-only | current | The number of dropped 15m red frames on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.34 | ColumnpmEthDropFrames24h | read-only | current | The number of dropped 24h frames on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.35 | ColumnpmEthDropBytes24h | read-only | current | The number of dropped 24h bytes on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.36 | ColumnpmEthDropYellowFrames24h | read-only | current | The number of dropped 24h yellow frames on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.37 | ColumnpmEthDropRedFrames24h | read-only | current | The number of dropped 24h red frames on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.38 | ColumnpmEthDropFrames15mQ1 | read-only | current | The number of dropped frames for 15m queue 1 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.39 | ColumnpmEthDropBytes15mQ1 | read-only | current | The number of dropped bytes for 15m queue 1 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.40 | ColumnpmEthDropFrames24hQ1 | read-only | current | The number of dropped frames for 24h queue 1 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.41 | ColumnpmEthDropBytes24hQ1 | read-only | current | The number of dropped bytes for 24h queue 1 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.42 | ColumnpmEthDropFrames15mQ2 | read-only | current | The number of dropped frames for 15m queue 2 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.43 | ColumnpmEthDropBytes15mQ2 | read-only | current | The number of dropped bytes for 15m queue 2 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.44 | ColumnpmEthDropFrames24hQ2 | read-only | current | The number of dropped frames for 24h queue 2 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.45 | ColumnpmEthDropBytes24hQ2 | read-only | current | The number of dropped bytes for 24h queue 2 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.46 | ColumnpmEthDropFrames15mQ3 | read-only | current | The number of dropped frames for 15m queue 3 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.47 | ColumnpmEthDropBytes15mQ3 | read-only | current | The number of dropped bytes for 15m queue 3 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.48 | ColumnpmEthDropFrames24hQ3 | read-only | current | The number of dropped frames for 24h queue 3 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.49 | ColumnpmEthDropBytes24hQ3 | read-only | current | The number of dropped bytes for 24h queue 3 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.50 | ColumnpmEthDropFrames15mQ4 | read-only | current | The number of dropped frames for 15m queue 4 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.51 | ColumnpmEthDropBytes15mQ4 | read-only | current | The number of dropped bytes for 15m queue 4 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.52 | ColumnpmEthDropFrames24hQ4 | read-only | current | The number of dropped frames for 24h queue 4 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.53 | ColumnpmEthDropBytes24hQ4 | read-only | current | The number of dropped bytes for 24h queue 4 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.54 | ColumnpmEthDropFrames15mQ5 | read-only | current | The number of dropped frames for 15m queue 5 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.55 | ColumnpmEthDropBytes15mQ5 | read-only | current | The number of dropped bytes for 15m queue 5 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.56 | ColumnpmEthDropFrames24hQ5 | read-only | current | The number of dropped frames for 24h queue 5 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.57 | ColumnpmEthDropBytes24hQ5 | read-only | current | The number of dropped bytes for 24h queue 5 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.58 | ColumnpmEthDropFrames15mQ6 | read-only | current | The number of dropped frames for 15m queue 6 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.59 | ColumnpmEthDropBytes15mQ6 | read-only | current | The number of dropped bytes for 15m queue 6 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.60 | ColumnpmEthDropFrames24hQ6 | read-only | current | The number of dropped frames for 24h queue 6 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.61 | ColumnpmEthDropBytes24hQ6 | read-only | current | The number of dropped bytes for 24h queue 6 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.62 | ColumnpmEthDropFrames15mQ7 | read-only | current | The number of dropped frames for 15m queue 7 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.63 | ColumnpmEthDropBytes15mQ7 | read-only | current | The number of dropped bytes for 15m queue 7 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.64 | ColumnpmEthDropFrames24hQ7 | read-only | current | The number of dropped frames for 24h queue 7 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.65 | ColumnpmEthDropBytes24hQ7 | read-only | current | The number of dropped bytes for 24h queue 7 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.66 | ColumnpmEthDropFrames15mQ8 | read-only | current | The number of dropped frames for 15m queue 8 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.67 | ColumnpmEthDropBytes15mQ8 | read-only | current | The number of dropped bytes for 15m queue 8 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.68 | ColumnpmEthDropFrames24hQ8 | read-only | current | The number of dropped frames for 24h queue 8 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.69 | ColumnpmEthDropBytes24hQ8 | read-only | current | The number of dropped bytes for 24h queue 8 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.70 | ColumnpmEthDropReset15m | read-write | current | Reset the 15 minutes drop counters. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset15m reset |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.71 | ColumnpmEthDropReset24h | read-write | current | Reset the 24 hours drop counters. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset24h reset |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.72 | ColumnpmEthDropReportMode | read-write | current | The mode for PM reporting to file on the interface. off - PM reporting is inactive. on - PM reporting is activated. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.73 | ColumnpmEthDropIsSuspect15Min | read-only | current | This variable indicates if the data for this interface is suspect. The current interval may for example only contain measurements for a part of the interval. |
| 1.3.6.1.4.1.8708.2.15.2.13.1.1.74 | ColumnpmEthDropIsSuspect24H | read-only | current | This variable indicates if the data for this interface is suspect. The current interval may for example only contain measurements for a part of the interval. |
| 1.3.6.1.4.1.8708.2.15.2.14 | NodepmEthClassificationList | |||
| 1.3.6.1.4.1.8708.2.15.2.14.1 | TablepmEthClassificationTable | not-accessible | current | The ethernet classification counters table. Each classification has two continuous (free running) counters. The counters are reset when the traffic unit reboot… |
| 1.3.6.1.4.1.8708.2.15.2.14.1.1 | RowpmEthClassificationEntry | not-accessible | current | An entry in interface table. |
| 1.3.6.1.4.1.8708.2.15.2.14.1.1.1 | ColumnpmEthClassificationIndex | read-only | current | An arbitrary index assigned to each classification entry. |
| 1.3.6.1.4.1.8708.2.15.2.14.1.1.2 | ColumnpmEthClassificationName | read-only | current | The management name of the interface, for example 'class:1:2:id1'. (class:[subrack]:[slot]:[identifier]). |
| 1.3.6.1.4.1.8708.2.15.2.14.1.1.3 | ColumnpmEthClassificationSubrack | read-only | current | The number of the subrack where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.14.1.1.4 | ColumnpmEthClassificationSlot | read-only | current | The number of the slot where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.14.1.1.5 | ColumnpmEthClassificationIdentifier | read-only | current | A unique identifier for the classification. |
| 1.3.6.1.4.1.8708.2.15.2.14.1.1.6 | ColumnpmEthClassificationResetCont | read-write | current | Reset the continuous (free running) classification counters. After a successful reset the default value (normal) is restored in this action attribute. |
| 1.3.6.1.4.1.8708.2.15.2.14.1.1.7 | ColumnpmEthClassificationInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.15.2.14.1.1.8 | ColumnpmEthClassificationCounter1 | read-only | current | Number of green and yellow frames in the classification. |
| 1.3.6.1.4.1.8708.2.15.2.14.1.1.9 | ColumnpmEthClassificationCounter2 | read-only | current | Number of red (not delivered) frames in the classification. |
| 1.3.6.1.4.1.8708.2.15.2.14.1.1.10 | ColumnpmEthClassificationCounter3 | read-only | current | Number of green and yellow bytes in the classification. |
| 1.3.6.1.4.1.8708.2.15.2.14.1.1.11 | ColumnpmEthClassificationCounter4 | read-only | current | Number of red (not delivered) bytes in the classification. |
| 1.3.6.1.4.1.8708.2.15.2.15 | NodepmMpoLanesList | |||
| 1.3.6.1.4.1.8708.2.15.2.15.1 | TablepmMpoLanesTable | not-accessible | current | The pm interface table. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1 | RowpmMpoLanesEntry | not-accessible | current | An entry in interface table. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.1 | ColumnpmMpoLanesIndex | read-only | current | An arbitrary index assigned to each if entry. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.2 | ColumnpmMpoLanesName | read-only | current | The management name of the interface, for example 'mrt:1:2:1-2'. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.3 | ColumnpmMpoLanesSubrack | read-create | current | The number of the subrack where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.4 | ColumnpmMpoLanesSlot | read-create | current | The number of the slot where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.5 | ColumnpmMpoLanesLaneId | read-create | current | The id of the lane within. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.6 | ColumnpmMpoLanesAdminStatus | read-write | current | Administrative state for the PM object. down - Alarms are not sent. up - Alarms are sent service - Alarms are not sent |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.7 | ColumnpmMpoLanesOperStatus | read-only | current | The operational state for the PM object. notPresent - The physical resource is not available. down - The object is disabled. up - The object is enabled. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.8 | ColumnpmMpoLanesPmReportMode | read-write | current | The mode PM reporting on the interface. off - PM reporting is inactive. on - PM reporting is activated. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.9 | ColumnpmMpoLanesIsSuspect15Min | read-only | current | This variable indicates if the data for this interface is suspect. The current interval may for example contain measurements for a part of the interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.10 | ColumnpmMpoLanesIsSuspect24H | read-only | current | This variable indicates if the data for this interface is suspect. The current interval may for example contain measurements for a part of the interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.11 | ColumnpmMpoLanesRxCurrentES | read-only | current | The counter associated with the number of Errored Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.12 | ColumnpmMpoLanesRxCurrentSES | read-only | current | The counter associated with the number of Severely Errored Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.13 | ColumnpmMpoLanesRxCurrentBBE | read-only | current | The counter associated with the number of Background Block Errors in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.14 | ColumnpmMpoLanesRxCurrentUAS | read-only | current | The counter associated with the number of Unavailable Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.15 | ColumnpmMpoLanesTxCurrentES | read-only | current | The counter associated with the number of Errored Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.16 | ColumnpmMpoLanesTxCurrentSES | read-only | current | The counter associated with the number of Severely Errored Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.17 | ColumnpmMpoLanesTxCurrentBBE | read-only | current | The counter associated with the number of Background Block Errors in in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.18 | ColumnpmMpoLanesTxCurrentUAS | read-only | current | The counter associated with the number of Unavailable Seconds encountered in the current 15 minute interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.19 | ColumnpmMpoLanesRx24hCurrentES | read-only | current | The counter associated with the number of Errored Seconds in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.20 | ColumnpmMpoLanesRx24hCurrentSES | read-only | current | The counter associated with the number of Severely Errored Seconds in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.21 | ColumnpmMpoLanesRx24hCurrentBBE | read-only | current | The counter associated with the number of Background Block Errors in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.22 | ColumnpmMpoLanesRx24hCurrentUAS | read-only | current | The counter associated with the number of Unavailable Seconds encountered in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.23 | ColumnpmMpoLanesTx24hCurrentES | read-only | current | The counter associated with the number of Errored Seconds in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.24 | ColumnpmMpoLanesTx24hCurrentSES | read-only | current | The counter associated with the number of Severely Errored Seconds in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.25 | ColumnpmMpoLanesTx24hCurrentBBE | read-only | current | The counter associated with the number of Background Block Errors in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.26 | ColumnpmMpoLanesTx24hCurrentUAS | read-only | current | The counter associated with the number of Unavailable Seconds encountered in the current 24 hour interval. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.27 | ColumnpmMpoLanesRxESThreshold | read-write | current | Sets the threshold in seconds for the errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.28 | ColumnpmMpoLanesRxSESThreshold | read-write | current | Sets the threshold in seconds for the severely errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.29 | ColumnpmMpoLanesRxBBEThreshold | read-write | current | Sets the threshold in seconds for the background block errors alarms. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.30 | ColumnpmMpoLanesRxUASThreshold | read-write | current | Sets the threshold in seconds for the unavailable seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.31 | ColumnpmMpoLanesTxESThreshold | read-write | current | Sets the threshold in seconds for the errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.32 | ColumnpmMpoLanesTxSESThreshold | read-write | current | Sets the threshold in seconds for the severely errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.33 | ColumnpmMpoLanesTxBBEThreshold | read-write | current | Sets the threshold in seconds for the background block errors alarms. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.34 | ColumnpmMpoLanesTxUASThreshold | read-write | current | Sets the threshold in seconds for the unavailable seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.35 | ColumnpmMpoLanesRx24hESThreshold | read-write | current | Sets the threshold in seconds for the errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.36 | ColumnpmMpoLanesRx24hSESThreshold | read-write | current | Sets the threshold in seconds for the severely errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.37 | ColumnpmMpoLanesRx24hBBEThreshold | read-write | current | Sets the threshold in seconds for the background block errors alarms. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.38 | ColumnpmMpoLanesRx24hUASThreshold | read-write | current | Sets the threshold in seconds for the unavailable seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.39 | ColumnpmMpoLanesTx24hESThreshold | read-write | current | Sets the threshold in seconds for the errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.40 | ColumnpmMpoLanesTx24hSESThreshold | read-write | current | Sets the threshold in seconds for the severely errored seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.41 | ColumnpmMpoLanesTx24hBBEThreshold | read-write | current | Sets the threshold in seconds for the background block errors alarms. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.42 | ColumnpmMpoLanesTx24hUASThreshold | read-write | current | Sets the threshold in seconds for the unavailable seconds alarm. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.43 | ColumnpmMpoLanesRxES | read-only | current | Errored seconds (ES) Rx 15 min threshold exceeded. A: The number of errored seconds during a period exceeds the associated threshold. D: At the start of a new … |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.44 | ColumnpmMpoLanesRxSES | read-only | current | Severely errored seconds (SES) Rx 15 min threshold exceeded. A: The number of severely errored seconds during a period exceeds the associated threshold. D: At … |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.45 | ColumnpmMpoLanesRxBBE | read-only | current | Background block errors (BBE) Rx 15 min threshold exceeded. A: The number of background block errors during a period exceeds the associated threshold. D: At th… |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.46 | ColumnpmMpoLanesRxUAS | read-only | current | Unavailable seconds (UAS) Rx 15 min threshold exceeded. A: The number of unavailable seconds during a period exceeds the associated threshold. D: At the start … |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.47 | ColumnpmMpoLanesTxES | read-only | current | Errored seconds (ES) Tx 15 min threshold exceeded. A: The number of errored seconds during a period exceeds the associated threshold. D: At the start of a new … |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.48 | ColumnpmMpoLanesTxSES | read-only | current | Severely errored seconds (SES) Tx 15 min threshold exceeded. A: The number of severely errored seconds during a period exceeds the associated threshold. D: At … |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.49 | ColumnpmMpoLanesTxBBE | read-only | current | Background block errors (BBE) Tx 15 min threshold exceeded. A: The number of background block errors during a period exceeds the associated threshold. D: At th… |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.50 | ColumnpmMpoLanesTxUAS | read-only | current | Unavailable seconds (UAS) Tx 15 min threshold exceeded. A: The number of unavailable seconds during a period exceeds the associated threshold. D: At the start … |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.51 | ColumnpmMpoLanesRx24hES | read-only | current | Errored seconds (ES) Rx 24 hour threshold exceeded. A: The number of errored seconds during a period exceeds the associated threshold. D: At the start of a new… |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.52 | ColumnpmMpoLanesRx24hSES | read-only | current | Severely errored seconds (SES) Rx 24 hour threshold exceeded. A: The number of severely errored seconds during a period exceeds the associated threshold. D: At… |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.53 | ColumnpmMpoLanesRx24hBBE | read-only | current | Background block errors (BBE) Rx 24 hour threshold exceeded. A: The number of background block errors during a period exceeds the associated threshold. D: At t… |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.54 | ColumnpmMpoLanesRx24hUAS | read-only | current | Unavailable seconds (UAS) Rx 24 hour threshold exceeded. A: The number of unavailable seconds during a period exceeds the associated threshold. D: At the start… |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.55 | ColumnpmMpoLanesTx24hES | read-only | current | Errored seconds Tx (ES) 24 hour threshold exceeded. A: The number of errored seconds during a period exceeds the associated threshold. D: At the start of a new… |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.56 | ColumnpmMpoLanesTx24hSES | read-only | current | Severely errored seconds (SES) Tx 24 hour threshold exceeded. A: The number of severely errored seconds during a period exceeds the associated threshold. D: At… |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.57 | ColumnpmMpoLanesTx24hBBE | read-only | current | Background block errors (BBE) Tx 24 hour threshold exceeded. A: The number of background block errors during a period exceeds the associated threshold. D: At t… |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.58 | ColumnpmMpoLanesTx24hUAS | read-only | current | Unavailable seconds (UAS) Tx 24 hour threshold exceeded. A: The number of unavailable seconds during a period exceeds the associated threshold. D: At the start… |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.59 | ColumnpmMpoLanesReset15Min | read-write | current | Reset the 15 minute PM counters for the interface. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset15… |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.60 | ColumnpmMpoLanesReset24H | read-write | current | Reset the 24 hour PM counters for the interface. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset24h … |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.61 | ColumnpmMpoLanesRxPowerLevel | read-only | current | The received power level in units of 0.1 dBm |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.62 | ColumnpmMpoLanesTxPowerLevel | read-only | current | The transmitted power level in units of 0.1 dBm |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.63 | ColumnpmMpoLanesObjectProperty | read-only | current | Property mask. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.64 | ColumnpmMpoLanesIfNo | read-create | current | The interface number of the port. |
| 1.3.6.1.4.1.8708.2.15.2.15.1.1.65 | ColumnpmMpoLanesUpPortId | read-create | current | Internal port reference for traffic unit. |
| 1.3.6.1.4.1.8708.2.15.2.16 | NodepmEthEgressList | |||
| 1.3.6.1.4.1.8708.2.15.2.16.1 | TablepmEthEgressTable | not-accessible | current | The ethernet egress counters table. Each port has a number of continuous (free running) counters. The counters are reset when the traffic unit reboots or when … |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1 | RowpmEthEgressEntry | not-accessible | current | An entry in interface table. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.1 | ColumnpmEthEgressIndex | read-only | current | An arbitrary index assigned to each if entry. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.2 | ColumnpmEthEgressName | read-only | current | The management name of the interface, for example 'port:1:2:1-2'. (port:[subrack]:[slot]:[Tx port]-[Rx port]). |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.3 | ColumnpmEthEgressSubrack | read-only | current | The number of the subrack where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.4 | ColumnpmEthEgressSlot | read-only | current | The number of the slot where the interface is located. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.5 | ColumnpmEthEgressIfNo | read-only | current | The interface number of the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.6 | ColumnpmEthEgressPort | read-only | current | The number of the Tx port for the interface. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.7 | ColumnpmEthEgressRxPort | read-only | current | The number of the Rx port for the interface. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.8 | ColumnpmEthEgressUpPortId | read-only | current | Internal port reference for traffic unit. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.9 | ColumnpmEthEgressResetCont | read-write | current | Reset the continuous (free running) egress counters. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset… |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.10 | ColumnpmEthEgressReset15m | read-write | current | Reset the 15m egress counters. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset15m reset |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.11 | ColumnpmEthEgressReset24h | read-write | current | Reset the 24h egress counters. After a successful reset the default value (normal) is restored in this action attribute. Usage: set reset24hm reset |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.12 | ColumnpmEthEgressFramesQ1 | read-only | current | The number of continuous egress frames for queue 1 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.13 | ColumnpmEthEgressBytesQ1 | read-only | current | The number of continuous egress bytes for queue 1 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.14 | ColumnpmEthEgressBandwidthQ1 | read-only | current | The data rate bandwidth for queue 1 on the port, in kbps. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.15 | ColumnpmEthEgressFrames15mQ1 | read-only | current | The number of 15m egress frames for queue 1 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.16 | ColumnpmEthEgressBytes15mQ1 | read-only | current | The number of 15m egress bytes for queue 1 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.17 | ColumnpmEthEgressFrames24hQ1 | read-only | current | The number of 24h egress frames for queue 1 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.18 | ColumnpmEthEgressBytes24hQ1 | read-only | current | The number of 24h egress bytes for queue 1 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.19 | ColumnpmEthEgressFramesQ2 | read-only | current | The number of continuous egress frames for queue 2 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.20 | ColumnpmEthEgressBytesQ2 | read-only | current | The number of continuous egress bytes for queue 2 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.21 | ColumnpmEthEgressBandwidthQ2 | read-only | current | The data rate bandwidth for queue 2 on the port, in kbps. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.22 | ColumnpmEthEgressFrames15mQ2 | read-only | current | The number of 15m egress frames for queue 2 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.23 | ColumnpmEthEgressBytes15mQ2 | read-only | current | The number of 15m egress bytes for queue 2 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.24 | ColumnpmEthEgressFrames24hQ2 | read-only | current | The number of 24h egress frames for queue 2 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.25 | ColumnpmEthEgressBytes24hQ2 | read-only | current | The number of 24h egress bytes for queue 2 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.26 | ColumnpmEthEgressFramesQ3 | read-only | current | The number of continuous egress frames for queue 3 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.27 | ColumnpmEthEgressBytesQ3 | read-only | current | The number of continuous egress bytes for queue 3 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.28 | ColumnpmEthEgressBandwidthQ3 | read-only | current | The data rate bandwidth for queue 3 on the port, in kbps. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.29 | ColumnpmEthEgressFrames15mQ3 | read-only | current | The number of 15m egress frames for queue 3 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.30 | ColumnpmEthEgressBytes15mQ3 | read-only | current | The number of 15m egress bytes for queue 3 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.31 | ColumnpmEthEgressFrames24hQ3 | read-only | current | The number of 24h egress frames for queue 3 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.32 | ColumnpmEthEgressBytes24hQ3 | read-only | current | The number of 24h egress bytes for queue 3 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.33 | ColumnpmEthEgressFramesQ4 | read-only | current | The number of continuous egress frames for queue 4 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.34 | ColumnpmEthEgressBytesQ4 | read-only | current | The number of continuous egress bytes for queue 4 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.35 | ColumnpmEthEgressBandwidthQ4 | read-only | current | The data rate bandwidth for queue 4 on the port, in kbps. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.36 | ColumnpmEthEgressFrames15mQ4 | read-only | current | The number of 15m egress frames for queue 4 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.37 | ColumnpmEthEgressBytes15mQ4 | read-only | current | The number of 15m egress bytes for queue 4 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.38 | ColumnpmEthEgressFrames24hQ4 | read-only | current | The number of 24h egress frames for queue 4 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.39 | ColumnpmEthEgressBytes24hQ4 | read-only | current | The number of 24h egress bytes for queue 4 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.40 | ColumnpmEthEgressFramesQ5 | read-only | current | The number of continuous egress frames for queue 5 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.41 | ColumnpmEthEgressBytesQ5 | read-only | current | The number of continuous egress bytes for queue 5 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.42 | ColumnpmEthEgressBandwidthQ5 | read-only | current | The data rate bandwidth for queue 5 on the port, in kbps. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.43 | ColumnpmEthEgressFrames15mQ5 | read-only | current | The number of 15m egress frames for queue 5 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.44 | ColumnpmEthEgressBytes15mQ5 | read-only | current | The number of 15m egress bytes for queue 5 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.45 | ColumnpmEthEgressFrames24hQ5 | read-only | current | The number of 24h egress frames for queue 5 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.46 | ColumnpmEthEgressBytes24hQ5 | read-only | current | The number of 24h egress bytes for queue 5 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.47 | ColumnpmEthEgressFramesQ6 | read-only | current | The number of continuous egress frames for queue 6 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.48 | ColumnpmEthEgressBytesQ6 | read-only | current | The number of continuous egress bytes for queue 6 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.49 | ColumnpmEthEgressBandwidthQ6 | read-only | current | The data rate bandwidth for queue 6 on the port, in kbps. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.50 | ColumnpmEthEgressFrames15mQ6 | read-only | current | The number of 15m egress frames for queue 6 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.51 | ColumnpmEthEgressBytes15mQ6 | read-only | current | The number of 15m egress bytes for queue 6 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.52 | ColumnpmEthEgressFrames24hQ6 | read-only | current | The number of 24h egress frames for queue 6 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.53 | ColumnpmEthEgressBytes24hQ6 | read-only | current | The number of 24h egress bytes for queue 6 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.54 | ColumnpmEthEgressFramesQ7 | read-only | current | The number of continuous egress frames for queue 7 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.55 | ColumnpmEthEgressBytesQ7 | read-only | current | The number of continuous egress bytes for queue 7 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.56 | ColumnpmEthEgressBandwidthQ7 | read-only | current | The data rate bandwidth for queue 7 on the port, in kbps. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.57 | ColumnpmEthEgressFrames15mQ7 | read-only | current | The number of 15m egress frames for queue 7 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.58 | ColumnpmEthEgressBytes15mQ7 | read-only | current | The number of 15m egress bytes for queue 7 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.59 | ColumnpmEthEgressFrames24hQ7 | read-only | current | The number of 24h egress frames for queue 7 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.60 | ColumnpmEthEgressBytes24hQ7 | read-only | current | The number of 24h egress bytes for queue 7 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.61 | ColumnpmEthEgressFramesQ8 | read-only | current | The number of continuous egress frames for queue 8 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.62 | ColumnpmEthEgressBytesQ8 | read-only | current | The number of continuous egress bytes for queue 8 on the port. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.63 | ColumnpmEthEgressBandwidthQ8 | read-only | current | The data rate bandwidth for queue 8 on the port, in kbps. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.64 | ColumnpmEthEgressFrames15mQ8 | read-only | current | The number of 15m egress frames for queue 8 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.65 | ColumnpmEthEgressBytes15mQ8 | read-only | current | The number of 15m egress bytes for queue 8 on the port. The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.66 | ColumnpmEthEgressFrames24hQ8 | read-only | current | The number of 24h egress frames for queue 8 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.67 | ColumnpmEthEgressBytes24hQ8 | read-only | current | The number of 24h egress bytes for queue 8 on the port. The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.68 | ColumnpmEthEgressReportMode | read-write | current | The mode for PM reporting to file on the interface. off - PM reporting is inactive. on - PM reporting is activated. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.69 | ColumnpmEthEgressIsSuspect15Min | read-only | current | This variable indicates if the data for this interface is suspect. The current interval may for example only contain measurements for a part of the interval. |
| 1.3.6.1.4.1.8708.2.15.2.16.1.1.70 | ColumnpmEthEgressIsSuspect24H | read-only | current | This variable indicates if the data for this interface is suspect. The current interval may for example only contain measurements for a part of the interval. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PmInterval15mNumber | Unsigned32 (1..96) | current | A number which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed interval, and the interval identified by N is the interval immediately pre… |
| PmInterval24hNumber | Unsigned32 (1..40) | current | A number which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed interval, and the interval identified by N is the interval immediately pre… |