LUM-PORTDEVICE-MIB
151 objects
The equipment configuration MIB module for port device. Then tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The Generic group contains generic information and configurations applicable to all port devices. (3) The Equipment group contains information and configurations for each port device. (4) Then Firmware group contains configuration, status and commands for firmware upgrade and other maintenance operations for each port device.
Imported Objects
| LUM-REG | lumModules lumPortdeviceMIB |
| LUM-TC | AdminStatus BoardOrInterfaceOperStatus CommandString EnableDisable FaultStatus MgmtNameString SlotNumber SubrackNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.57 | IdentitylumPortdeviceMIBModule | The equipment configuration MIB module for port device. Then tables contained in this MIB are: (1) The General group contains some general attributes as time s… | ||
| 1.3.6.1.4.1.8708.2.57.1 | NodelumPortdeviceConfs | |||
| 1.3.6.1.4.1.8708.2.57.1.1 | NodelumPortdeviceGroups | |||
| 1.3.6.1.4.1.8708.2.57.1.1.1 | GroupportDevGeneralGroupV1 | current | The general objects. | |
| 1.3.6.1.4.1.8708.2.57.1.1.2 | GroupportDevGenericGroupV1 | deprecated | The generic objects (R21.0). | |
| 1.3.6.1.4.1.8708.2.57.1.1.3 | GroupportDevEquipmentGroupV1 | deprecated | The equipment objects (R21.0). | |
| 1.3.6.1.4.1.8708.2.57.1.1.4 | GroupportDevFwGroupV1 | current | The firmware objects (R21.0). | |
| 1.3.6.1.4.1.8708.2.57.1.1.5 | GroupportDevIwfGroupV1 | deprecated | The Port Device IWF objects (R21.0). | |
| 1.3.6.1.4.1.8708.2.57.1.1.6 | GroupportDevIwfPmGroupV1 | deprecated | The Port Device IWF PM objects (R21.0). | |
| 1.3.6.1.4.1.8708.2.57.1.1.7 | GroupportDevEquipmentGroupV2 | deprecated | The equipment objects (R22.0). | |
| 1.3.6.1.4.1.8708.2.57.1.1.8 | GroupportDevEquipmentGroupV3 | deprecated | The equipment objects (R23.0). | |
| 1.3.6.1.4.1.8708.2.57.1.1.9 | GroupportDevIwfGroupV2 | current | The Port Device IWF objects (R26.0). | |
| 1.3.6.1.4.1.8708.2.57.1.1.10 | GroupportDevIwfPmGroupV2 | current | The Port Device IWF PM objects (R26.0). | |
| 1.3.6.1.4.1.8708.2.57.1.1.11 | GroupportDevEquipmentGroupV4 | deprecated | The equipment objects (R26.0). | |
| 1.3.6.1.4.1.8708.2.57.1.1.12 | GroupportDevEquipmentGroupV5 | current | The equipment objects (R28.0). | |
| 1.3.6.1.4.1.8708.2.57.1.1.13 | GroupportDevGenericGroupV2 | current | The generic objects (R30.1). | |
| 1.3.6.1.4.1.8708.2.57.1.2 | NodelumPortdeviceCompl | |||
| 1.3.6.1.4.1.8708.2.57.1.2.1 | CompliancelumPortdeviceBasicComplV1 | deprecated | Basic implementation requirements for the port device MIB. (R21.0). | |
| 1.3.6.1.4.1.8708.2.57.1.2.2 | CompliancelumPortdeviceBasicComplV2 | deprecated | Basic implementation requirements for the port device MIB. (R22.0). | |
| 1.3.6.1.4.1.8708.2.57.1.2.3 | CompliancelumPortdeviceBasicComplV3 | deprecated | Basic implementation requirements for the port device MIB. (R23.0). | |
| 1.3.6.1.4.1.8708.2.57.1.2.4 | CompliancelumPortdeviceBasicComplV4 | deprecated | Basic implementation requirements for the port device MIB. (R26.0). | |
| 1.3.6.1.4.1.8708.2.57.1.2.5 | CompliancelumPortdeviceBasicComplV5 | deprecated | Basic implementation requirements for the port device MIB. (R28.0). | |
| 1.3.6.1.4.1.8708.2.57.1.2.6 | CompliancelumPortdeviceBasicComplV6 | current | Basic implementation requirements for the port device MIB. (R30.1). | |
| 1.3.6.1.4.1.8708.2.57.2 | NodelumPortdeviceMIBObjects | |||
| 1.3.6.1.4.1.8708.2.57.2.1 | NodeportDevGeneral | |||
| 1.3.6.1.4.1.8708.2.57.2.1.1 | ScalarportDevGeneralLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.57.2.1.2 | ScalarportDevGeneralStateLastChangeTime | read-only | current | The time when the state of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.57.2.1.3 | ScalarportDevGeneralGenericTableSize | read-only | current | Size of generic table |
| 1.3.6.1.4.1.8708.2.57.2.1.4 | ScalarportDevGeneralEquipmentTableSize | read-only | current | Size of equipment table |
| 1.3.6.1.4.1.8708.2.57.2.1.5 | ScalarportDevGeneralFwTableSize | read-only | current | Size of firmware table |
| 1.3.6.1.4.1.8708.2.57.2.1.6 | ScalarportDevGeneralIwfTableSize | read-only | current | Size of IWF configuration table |
| 1.3.6.1.4.1.8708.2.57.2.1.7 | ScalarportDevGeneralIwfPmTableSize | read-only | current | Size of IWF PM table |
| 1.3.6.1.4.1.8708.2.57.2.2 | NodeportDevGenericList | |||
| 1.3.6.1.4.1.8708.2.57.2.2.1 | TableportDevGenericTable | not-accessible | current | The generic list. |
| 1.3.6.1.4.1.8708.2.57.2.2.1.1 | RowportDevGenericEntry | not-accessible | current | An entry in the generic list. |
| 1.3.6.1.4.1.8708.2.57.2.2.1.1.1 | ColumnportDevGenericIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.57.2.2.1.1.2 | ColumnportDevGenericName | read-only | current | The management name of the interface, for example 'generic:1:2', where the first number indicates subrack, the second slot number. |
| 1.3.6.1.4.1.8708.2.57.2.2.1.1.3 | ColumnportDevGenericSubrack | read-only | current | The subrack that this port device belongs to. |
| 1.3.6.1.4.1.8708.2.57.2.2.1.1.4 | ColumnportDevGenericSlot | read-only | current | The slot that this port device belongs to. |
| 1.3.6.1.4.1.8708.2.57.2.2.1.1.5 | ColumnportDevGenericAutoDiscoverInterval | read-write | current | Interval at which the auto discovery of port devices runs. 0 to disable auto discovery. The auto discover interval is configured for all port devices of the bo… |
| 1.3.6.1.4.1.8708.2.57.2.2.1.1.6 | ColumnportDevGenericCreateNewPortDevice | read-only | current | Internal command for creating a port device. Device type - type of port device to be created. Port - port of the EMXP board on which to add a port device. VLAN… |
| 1.3.6.1.4.1.8708.2.57.2.2.1.1.7 | ColumnportDevGenericRestartPortDevice | read-only | current | Internal command for restarting a port device. Port device - select the device to restart. Restart type - type of restart. Cold Traffic disturbing restart. War… |
| 1.3.6.1.4.1.8708.2.57.2.2.1.1.8 | ColumnportDevGenericCreateMep | read-only | current | Command for creating a Mep object. MEG - Identifies to which Meg the Mep will be added. Mep type - Local or Remote. MEP identifier - Identifier for the Mep (ra… |
| 1.3.6.1.4.1.8708.2.57.2.2.1.1.9 | ColumnportDevGenericCreateMeg | read-only | current | Create and associate a MEG (MAID) for a Portdevice Identifier - A unique user defined identifier for the MEG. Level - Maintenance domain level. CCM interval - … |
| 1.3.6.1.4.1.8708.2.57.2.2.1.1.10 | ColumnportDevGenericCreateNewPortDeviceAdvanced | read-only | current | Internal command for creating a port device. Device type - type of port device to be created. Port - port of the EMXP board on which to add a port device. VLAN… |
| 1.3.6.1.4.1.8708.2.57.2.3 | NodeportDevEquipmentList | |||
| 1.3.6.1.4.1.8708.2.57.2.3.1 | TableportDevEquipmentTable | not-accessible | current | The equipment list. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1 | RowportDevEquipmentEntry | not-accessible | current | An entry in the board list. One entry for each slot. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.1 | ColumnportDevEquipmentIndex | read-only | current | An arbitrary index assigned to each port device entry. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.2 | ColumnportDevEquipmentName | read-only | current | The name of the port device, for example 'nidGe:1:2:1-2:1' where the four numbers indicate in which physical port that the port device is add to and the last n… |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.3 | ColumnportDevEquipmentDescr | read-write | current | User configurable label for the port device. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.4 | ColumnportDevEquipmentLocation | read-write | current | The location of the port device. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.5 | ColumnportDevEquipmentAdminStatus | read-write | current | The administrative state of the port device. down - The device should be inactive. Alarms are suppressed. up - The device should be activated when it becomes a… |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.6 | ColumnportDevEquipmentOperStatus | read-only | current | The operational state of the port device. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults prevent… |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.7 | ColumnportDevEquipmentExpectedType | read-create | current | The expected port device type. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.8 | ColumnportDevEquipmentActualType | read-only | current | The actual device type. If an unexpected device has been detected this variable can be used to see what type of board has been detected. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.9 | ColumnportDevEquipmentFwVersion | read-only | current | The version of the firmware installed on port device. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.10 | ColumnportDevEquipmentFwUpgradeStatus | read-only | current | The progress status of the firmware installation and activation. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.11 | ColumnportDevEquipmentLinkPassThrough | read-write | current | Indicates whether Link Pass-Through is enabled, i.e. whether the other interface of the Two-Port MAC Relay relays defects to this interface. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.12 | ColumnportDevEquipmentSubrack | read-create | current | The number of the subrack where the port device is located. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.13 | ColumnportDevEquipmentSlot | read-create | current | The slot where the port device is located. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.14 | ColumnportDevEquipmentVlanId | read-create | current | User specified VLAN ID, which is last number in the port device ID. If no VLAN ID is specified then VLAN ID 0 is assumed. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.15 | ColumnportDevEquipmentRowStatus | read-create | current | Manages creation and deletion of conceptual rows. See also SNMPv2-TC. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.16 | ColumnportDevEquipmentNoDeviceFound | read-only | current | There is no device present where the expected device type is defined. A(ctivation): Absence of expected device. D(e-activation): Insert expected device. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.17 | ColumnportDevEquipmentMultiDeviceFound | read-only | current | There is more than one device present where the expected device type is defined. A(ctivation): More than one device is detected. D(e-activation): One device is… |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.18 | ColumnportDevEquipmentDeviceNotManageable | read-only | current | The firmware on the device is not supported by the current software version. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.19 | ColumnportDevEquipmentDeviceNotReachable | read-only | current | The portdevice is not reachable by the traffic unit. A(ctivation): When the traffic unit loses contact with the port device. D(e-activation): When the connecti… |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.20 | ColumnportDevEquipmentConfigurationFault | read-only | current | The configuration stage of the portdevice setup did not successfully finish. A(ctivation): Configuration failure. D(e-activation): Configuration successful. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.21 | ColumnportDevEquipmentPowerAMissing | read-only | current | Lost connection to power module A A(ctivation): When the port device loses contact with the power module A. D(e-activation): When the connection is restored. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.22 | ColumnportDevEquipmentPowerBMissing | read-only | current | Lost connection to power module B A(ctivation): When the port device loses contact with the power module B. D(e-activation): When the connection is restored. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.23 | ColumnportDevEquipmentInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.24 | ColumnportDevEquipmentMacAddress | read-only | current | The mac address of the port device. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.25 | ColumnportDevEquipmentLocalPortIndex | read-create | current | The index of the port that this device is connected to. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.26 | ColumnportDevEquipmentAdminPowerA | read-write | current | Alarms relating to power module A are suppressed. down - Alarms relating to power module A are suppressed. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.27 | ColumnportDevEquipmentAdminPowerB | read-write | current | Alarms relating to power module B are suppressed. down - Alarms relating to power module B are suppressed. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.28 | ColumnportDevEquipmentSelectedPort | read-write | current | Selected active port on the customer interface of the nid. Alarms on non selected ports are suppressed. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.29 | ColumnportDevEquipmentDestMacAddress | read-write | deprecated | The destination MAC address inserted into the transmitted packets. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.30 | ColumnportDevEquipmentDestMacAddressCheck | read-write | current | If enabled, for each received packet the destination MAC address is compared with the device MAC address. In case the addresses are not equal, the packet is no… |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.31 | ColumnportDevEquipmentDeviceVersionType | read-only | current | The device version type. This variable can be used to see what version of the board has been detected. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.32 | ColumnportDevEquipmentActivePort | read-only | current | Active port on the customer interface of the nid. Alarms on non selected ports are suppressed. |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.33 | ColumnportDevEquipmentDyingGasp | read-only | current | A Dying Gasp is signalled when power is going to be lost on the device. This could possibly indicate a power loss. A(ctivation): A Dying Gasp was received D(e-… |
| 1.3.6.1.4.1.8708.2.57.2.3.1.1.34 | ColumnportDevEquipmentLosCsf | read-write | current | Indicates whether Los Csf is enabled. |
| 1.3.6.1.4.1.8708.2.57.2.4 | NodeportDevFwList | |||
| 1.3.6.1.4.1.8708.2.57.2.4.1 | TableportDevFwTable | not-accessible | current | The firmware list. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1 | RowportDevFwEntry | not-accessible | current | An entry in the firmware list. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.1 | ColumnportDevFwIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.2 | ColumnportDevFwSubrack | read-only | current | The subrack that the port device belongs to. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.3 | ColumnportDevFwSlot | read-only | current | The slot that the port device belongs to. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.4 | ColumnportDevFwName | read-only | current | The name of the firmware entry, same as the port device name where the firmware is stored. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.5 | ColumnportDevFwPortDevId | read-only | current | An arbitrary index(aka sdId) assigned to the local device entry, where the firmware is stored in. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.6 | ColumnportDevFwImgSlotOneNr | read-only | current | The slot number of the stored firmware. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.7 | ColumnportDevFwImgSlotOneVersion | read-only | current | The version of the firmware that is in slot one. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.8 | ColumnportDevFwImgSlotOneState | read-only | current | The state of the firmware that is in slot one. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.9 | ColumnportDevFwImgSlotOneDate | read-only | current | The date of the firmware that is in slot one. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.10 | ColumnportDevFwImgSlotTwoNr | read-only | current | The slot number of the stored firmware. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.11 | ColumnportDevFwImgSlotTwoVersion | read-only | current | The version of the firmware that is in slot two. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.12 | ColumnportDevFwImgSlotTwoState | read-only | current | The state of the firmware that is in slot two. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.13 | ColumnportDevFwImgSlotTwoDate | read-only | current | The date of the firmware that is in slot two. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.14 | ColumnportDevFwInstallFw | read-only | current | Install firmware on a port device. Portdevice - Select the portdevice to upgrade The Active/Inactive sections show information about firmware available in the … |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.15 | ColumnportDevFwActivateFw | read-only | current | Activate a firmware on a device. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.16 | ColumnportDevFwGetAllFiles | read-only | current | List all availabe firmware files on the board. |
| 1.3.6.1.4.1.8708.2.57.2.4.1.1.17 | ColumnportDevFwUpgradeStatus | read-only | current | The status of the firmware installation and activation. |
| 1.3.6.1.4.1.8708.2.57.2.5 | NodeportDevIwfList | |||
| 1.3.6.1.4.1.8708.2.57.2.5.1 | TableportDevIwfTable | not-accessible | current | The iwf port device list. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1 | RowportDevIwfEntry | not-accessible | current | An entry in the board list. One entry for each slot. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.1 | ColumnportDevIwfIndex | read-only | current | An arbitrary index assigned to each port device entry. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.2 | ColumnportDevIwfName | read-only | current | The management name of the IWF entry. The generated name can for example be 'iSFP:1:2:1-2'where the numbers after 'iSFP:' indicate the port the device is creat… |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.3 | ColumnportDevIwfRtpClockSource | read-write | current | The clock source expected to be used for the Real-Time Protocol header timestamps. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.4 | ColumnportDevIwfJitterBufferRecenter | read-write | current | Function to re-center position of jitter buffer. Setting of this object triggers recentering of the jitter buffer to the default position. Recentering the jitt… |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.5 | ColumnportDevIwfInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.6 | ColumnportDevIwfLocalPortIndex | read-create | current | The index of the port that this device is connected to. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.7 | ColumnportDevIwfLossOfSignal | read-only | current | Loss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.8 | ColumnportDevIwfLossOfFrame | read-only | current | Loss of frame. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.9 | ColumnportDevIwfEquipmentFailure | read-only | current | Equipment failure. Catastrophic failure of the hardware of the iSFP device. Replace the faulty hardware. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.10 | ColumnportDevIwfNoTdmPayload | read-only | current | This alarm is generated when the device receives a packet stream with the L-bit set in the Control Word. This bit is set in the far end upon a LOS/LOF/AIS cond… |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.11 | ColumnportDevIwfRemotePacketLost | read-only | current | Remote Packet Lost. Remote end is sending packets but is not recieving any. Local encapsulation may be disabled or local destination MAC address may be wrong o… |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.12 | ColumnportDevIwfLocalPacketLost | read-only | current | Local Packet Lost. No packets are received. Remote encapsulation may be disabled or remote destination MAC address may be wrong or packets are blocked or dropp… |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.13 | ColumnportDevIwfAdminStatus | read-write | current | The administrative state of the port device IWF. down - The device should be inactive. Alarms are suppressed. up - The device should be activated when it becom… |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.14 | ColumnportDevIwfOperStatus | read-only | current | The operational state of the IWF. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventing it f… |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.15 | ColumnportDevIwfDescr | read-write | current | User configurable label for the port device iwf. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.16 | ColumnportDevIwfSignalFormat | read-only | current | The signal format. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.17 | ColumnportDevIwfEtherType | read-write | current | Specifies the ether type of the VLAN. qTag0x8100 - 802.1Q sTag0x88a8 - 802.1ad Service tag |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.18 | ColumnportDevIwfVlanId | read-write | current | User specified VLAN ID, used to map E1 channel to Vlan. If no VLAN ID is specified then VLAN ID 0 is assumed. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.19 | ColumnportDevIwfVlanPriority | read-write | current | Priority for the Vlan. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.20 | ColumnportDevIwfE1ChannelId | read-create | current | User specified ChannelId, used to map E1 channel to Vlan. If no Channel ID is specified then 0 is assumed. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.21 | ColumnportDevIwfE1ChannelKLM | read-only | current | K,L,M numbering indicates a fixed mapping of a physical IWF-channel to each VC12. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.22 | ColumnportDevIwfDestMacAddress | read-write | current | The destination MAC address inserted into the transmitted packets. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.23 | ColumnportDevIwfTributaryUnitAlarm | read-only | current | alarm: An TU-AIS signal is detected. ok: The TU-AIS is cleared. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.24 | ColumnportDevIwfMultiplexSectionAlarm | read-only | current | alarm: An MS-AIS signal is detected. ok: The MS-AIS is cleared. |
| 1.3.6.1.4.1.8708.2.57.2.5.1.1.25 | ColumnportDevIwfMultiplexSectionRDI | read-only | current | alarm: An MS-RDI signal is detected. ok: The MS-RDI is cleared. |
| 1.3.6.1.4.1.8708.2.57.2.6 | NodeportDevIwfPmList | |||
| 1.3.6.1.4.1.8708.2.57.2.6.1 | TableportDevIwfPmTable | not-accessible | current | A table containing the counters of IWF channels of the iSFP. |
| 1.3.6.1.4.1.8708.2.57.2.6.1.1 | RowportDevIwfPmEntry | not-accessible | current | A list of objects containing the counters of an IWF channel. |
| 1.3.6.1.4.1.8708.2.57.2.6.1.1.1 | ColumnportDevIwfPmIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.57.2.6.1.1.2 | ColumnportDevIwfPmName | read-only | current | The management name of the IWF PM entry. The generated name can for example be 'iSFP:1:2:1-2'where the numbers after 'iSFP:' indicate the port the device is cr… |
| 1.3.6.1.4.1.8708.2.57.2.6.1.1.3 | ColumnportDevIwfPmRxPackets | read-only | current | Number of received packets. |
| 1.3.6.1.4.1.8708.2.57.2.6.1.1.4 | ColumnportDevIwfPmTxPackets | read-only | current | Number of transmitted packets. |
| 1.3.6.1.4.1.8708.2.57.2.6.1.1.5 | ColumnportDevIwfPmMalformedPackets | read-only | current | Number of malformed packets. |
| 1.3.6.1.4.1.8708.2.57.2.6.1.1.6 | ColumnportDevIwfPmReorderedPackets | read-only | current | Number of reordered packets. |
| 1.3.6.1.4.1.8708.2.57.2.6.1.1.7 | ColumnportDevIwfPmMisorderedDroppedPackets | read-only | current | Number of dropped misordered packets. |
| 1.3.6.1.4.1.8708.2.57.2.6.1.1.8 | ColumnportDevIwfPmMissingPackets | read-only | current | Number of missing packets. |
| 1.3.6.1.4.1.8708.2.57.2.6.1.1.9 | ColumnportDevIwfPmPlayedOutPackets | read-only | current | Number of packets of which TDM payload is transmitted as received. |
| 1.3.6.1.4.1.8708.2.57.2.6.1.1.10 | ColumnportDevIwfPmJbOverrun | read-only | current | Number of jitter buffer overrun packets. |
| 1.3.6.1.4.1.8708.2.57.2.6.1.1.11 | ColumnportDevIwfPmJbUnderrun | read-only | current | Number of jitter buffer underrun packets. |
| 1.3.6.1.4.1.8708.2.57.2.6.1.1.12 | ColumnportDevIwfPmReset | read-write | current | Setting of this object to 'reset' invokes a reset of the counters for this IWF channel. This object is merely used to invoke a reset, and its actual value has … |
| 1.3.6.1.4.1.8708.2.57.2.6.1.1.13 | ColumnportDevIwfPmInternalReference | read-only | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.57.2.6.1.1.14 | ColumnportDevIwfPmE1ChannelId | read-create | current | User specified ChannelId, used to map E1 channel to Vlan. If no Channel ID is specified then 0 is assumed. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PortDevFwImgState | INTEGER { unknown (0), inactive (1), active (2), empty (3) } | current | The states of the firware image on port device. unknown - Can not get image information from port device inactive - Image stored but not activated active - Image stored and activated empty - No image stored |
| PortDeviceEquipmentType | INTEGER { undefined (0), nidGe (1), iSfp155 (2), iSfp622 (3), iSfpVc12 (4), iSfp2488 (5) } | current | The functional type of the port device. At least one type is defined for each combination of the following properties of the port device: 1 - number of interfaces 2 - type of interfaces 3 - the functionality of the port… |
| PortDeviceVersionType | INTEGER { undefined (0), tpmrPmR11S (1), ex12NidR22S (3), tsop155GeConvPmR12 (4), tsop622GeConvPmR12 (5), tpmrPmR15RespS (8), tpmrPmR15InitS (10), ex14NidR10S (11), tpmrPmR11L (12), tsop155GeConvPmR15 (24), tsop622GeConvPmR15 (25), ex14NidR20S (31), ex14NidR40S (32), tsopStm1eGeConvPmR15 (258), tpmrPmR20TranspS (259) } | current | |
| PortSelection | INTEGER { cifa (0), cifb (1), auto (2) } | current | Selection of active port and alarm suppression Auto(0) Active port is automatically selected based on LOS. CifA(1) CifA active port (Optical), alarms for CifB suppressed. CifB(2) CifB active port (Electrical), alarms fo… |