LUM-PORTDEVICEIF-MIB
67 objects
The equipment configuration MIB module for port device interface. Then tables contained in this MIB are: (1) The Interface groups contains information and configurations for each port device interface. - L1 Configuration - L2 Configuration
Imported Objects
| IF-MIB | InterfaceIndex |
| LUM-REG | lumModules lumPortdeviceIfMIB |
| LUM-TC | AdminStatus BoardOrInterfaceOperStatus FaultStatus LambdaFrequency MgmtNameString OnOff SlotNumber SubrackNumber TrxMedia |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.58 | IdentitylumPortdeviceIfMIBModule | The equipment configuration MIB module for port device interface. Then tables contained in this MIB are: (1) The Interface groups contains information and conf… | ||
| 1.3.6.1.4.1.8708.2.58.1 | NodelumPortdeviceIfConfs | |||
| 1.3.6.1.4.1.8708.2.58.1.1 | NodelumPortdeviceIfGroups | |||
| 1.3.6.1.4.1.8708.2.58.1.1.1 | GroupportDevIfGeneralGroupV1 | current | The general objects. | |
| 1.3.6.1.4.1.8708.2.58.1.1.2 | GroupportDevIfL1GroupV1 | current | The L1 objects (R21.0). | |
| 1.3.6.1.4.1.8708.2.58.1.1.3 | GroupportDevIfL2GroupV1 | current | The L2 objects (R21.0). | |
| 1.3.6.1.4.1.8708.2.58.1.2 | NodelumPortdeviceIfCompl | |||
| 1.3.6.1.4.1.8708.2.58.1.2.1 | CompliancelumPortDeviceBasicComplV1 | current | Basic implementation requirements for the port device interface MIB. (R21.0). | |
| 1.3.6.1.4.1.8708.2.58.2 | NodelumPortdeviceIfMIBObjects | |||
| 1.3.6.1.4.1.8708.2.58.2.1 | NodeportDevIfGeneral | |||
| 1.3.6.1.4.1.8708.2.58.2.1.1 | ScalarportDevIfGeneralLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.58.2.1.2 | ScalarportDevIfGeneralStateLastChangeTime | read-only | current | The time when the state and/or configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.58.2.1.3 | ScalarportDevIfL1TableSize | read-only | current | Size of portDevIfL1 table. |
| 1.3.6.1.4.1.8708.2.58.2.1.4 | ScalarportDevIfL2TableSize | read-only | current | Size of portDevIfL2 table. |
| 1.3.6.1.4.1.8708.2.58.2.2 | NodeportDevIfL1List | |||
| 1.3.6.1.4.1.8708.2.58.2.2.1 | TableportDevIfL1Table | not-accessible | current | A table containing the parameters of the interfaces of all SDs. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1 | RowportDevIfL1Entry | not-accessible | current | A list of objects containing the parameters of an interface of an SD. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.1 | ColumnportDevIfIndex | read-only | current | Unique number identifying the portdev interface. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.2 | ColumnportDevIfL1Name | read-only | current | The management name of the nid customer interface, for example 'nid:1', where the first number indicates customer interface |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.3 | ColumnportDevIfL1Descr | read-write | current | User configurable label for the port device interface L2 Description . |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.4 | ColumnportDevIfL1AdminStatus | read-write | current | The administrative alarm status of the port device interface. Note that the portdevice interface is still active when set to down. To shut down traffic, use th… |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.5 | ColumnportDevIfL1OperStatus | read-only | current | The operational state of the port device interface. notPresent - The physical resources are not available. down - The interface is de-activated or the are faul… |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.6 | ColumnportDevIfL1PortDevId | read-create | current | An arbitrary index assigned to each port device entry aka sdId. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.7 | ColumnportDevIfL1Subrack | read-create | current | The number of the subrack where the port device is located. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.8 | ColumnportDevIfL1Slot | read-create | current | The slot where the port device is located. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.9 | ColumnportDevIfL1LocalPort | read-create | current | The index of the local port that this device is connected to. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.10 | ColumnportDevIfL1VlanId | read-create | current | User specified VLAN ID, which is last number in the port device ID. If no VLAN ID is specified then VLAN ID 0 is assumed. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.11 | ColumnportDevIfL1NidPort | read-create | current | Describes which port of Nid is used, Nif, CifA or CifB |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.12 | ColumnportDevIfL1InternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.13 | ColumnportDevIfL1LaserStatus | read-only | current | The operational state of the laser. off - The laser is turned off. on - The laser is turned on. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.14 | ColumnportDevIfL1LaserBias | read-only | current | Measures laser bias current value in tenths of mA (0.1 mA). |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.15 | ColumnportDevIfL1LaserTempActual | read-only | current | The actual laser temperature in units of 0.1 degrees centigrade. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.16 | ColumnportDevIfL1TxFrequency | read-only | current | The transmitted frequency given in hundreds of GHz (0.01 GHz). |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.17 | ColumnportDevIfL1ExpectedTxFrequency | read-write | current | The expected frequency given in hundreds of GHz (0.01 GHz). |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.18 | ColumnportDevIfL1SignalFormat | read-write | current | The expected signal format. This value is only used for electrical interfaces. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.19 | ColumnportDevIfL1TrxMedia | read-create | current | Defines the media and capability of the TRX. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.20 | ColumnportDevIfL1ReceiverSensitivity | read-only | current | The lowest power that the receiver is guaranteed to handle, in units of 0.1 dBm. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.21 | ColumnportDevIfL1PowerLevel | read-only | current | The received power level in units of 0.1 dBm. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.22 | ColumnportDevIfL1PowerLevelLowRelativeThreshold | read-write | current | The lower threshold for received power level in units of 0.1 dB, relative to the receiver sensitivity. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.23 | ColumnportDevIfL1TxPowerLevel | read-only | current | The transmitted power level in units of 0.1 dBm. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.24 | ColumnportDevIfL1RxHighPower | read-only | current | The highest power that the receiver is guaranteed to handle, in units of 0.1 dBm. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.25 | ColumnportDevIfL1TrxClass | read-only | current | String that describes the transceiver class. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.26 | ColumnportDevIfL1LossOfSignal | read-only | current | Loss of signal on a portdevice interface A(ctivation): Signal is lost. D(e-activation): Signal is restored. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.27 | ColumnportDevIfL1TrxMissing | read-only | current | transceiver not inserted on a portdevice interface A(ctivation): An expected transceiver is missing. D(e-activation): The missing transceiver is inserted. |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.28 | ColumnportDevIfL1ReceivedPowerLow | read-only | current | Received power level low threshold exceeded. Applicable for all signal formats. A(ctivation): The received power level is below the associated threshold. D(e-a… |
| 1.3.6.1.4.1.8708.2.58.2.2.1.1.29 | ColumnportDevIfL1ReceivedPowerHigh | read-only | current | Received power level too high for the transceiver Applicable for all signal formats. |
| 1.3.6.1.4.1.8708.2.58.2.3 | NodeportDevIfL2List | |||
| 1.3.6.1.4.1.8708.2.58.2.3.1 | TableportDevIfL2Table | not-accessible | current | A table containing the L2 parameters of all interfaces of all SDs. |
| 1.3.6.1.4.1.8708.2.58.2.3.1.1 | RowportDevIfL2Entry | not-accessible | current | A list of objects containing the L2 parameters of a portdevice interface. |
| 1.3.6.1.4.1.8708.2.58.2.3.1.1.1 | ColumnportDevIfL2Index | read-create | current | Unique number identifying the portdevice interface within the scope of the containing interface. |
| 1.3.6.1.4.1.8708.2.58.2.3.1.1.2 | ColumnportDevIfL2Name | read-only | current | The management name of the nid customer interface, for example 'L2:1:1:1:1:CifA'. |
| 1.3.6.1.4.1.8708.2.58.2.3.1.1.3 | ColumnportDevIfL2Descr | read-write | current | User configurable label for the port device interface L2 Description . |
| 1.3.6.1.4.1.8708.2.58.2.3.1.1.4 | ColumnportDevIfL2PortDevId | read-create | current | An arbitrary index assigned to each port device entry aka sdId. |
| 1.3.6.1.4.1.8708.2.58.2.3.1.1.5 | ColumnportDevIfL2Subrack | read-create | current | The number of the subrack where the port device is located. |
| 1.3.6.1.4.1.8708.2.58.2.3.1.1.6 | ColumnportDevIfL2Slot | read-create | current | The slot where the port device is located. |
| 1.3.6.1.4.1.8708.2.58.2.3.1.1.7 | ColumnportDevIfL2LocalPort | read-create | current | The index of the port that this device is connected to. |
| 1.3.6.1.4.1.8708.2.58.2.3.1.1.8 | ColumnportDevIfL2VlanId | read-create | current | User specified VLAN ID, which is last number in the port device ID. If no VLAN ID is specified then VLAN ID 0 is assumed. |
| 1.3.6.1.4.1.8708.2.58.2.3.1.1.9 | ColumnportDevIfL2NidPort | read-create | current | Describes which port of Nid is used, Nif, CifA or CifB |
| 1.3.6.1.4.1.8708.2.58.2.3.1.1.10 | ColumnportDevIfL2InternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.58.2.3.1.1.11 | ColumnportDevIfL2AutoNegotiation | read-write | current | Indicates whether auto-negotiation is enabled for the portdevice interfaces. |
| 1.3.6.1.4.1.8708.2.58.2.3.1.1.12 | ColumnportDevIfL2AutoNegotiationStatus | read-only | current | The current auto-negotiation status of the portdevice interfaces: halfDuplex fullDuplex autoDuplex incomplete |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| LumPortDeviceDuplexMode | INTEGER { halfDuplex(0), fullDuplex(1), autoDuplex(2), incomplete(3), duplexNotAvailable(254), duplexNotApplicable(255) } | current | Represents a duplex mode of an interface of an SD. |
| LumPortDeviceInterface | INTEGER { interfaceNone(0), ifNif(1), ifCifA(2), ifCifB(3) } | current | Nid Interface Type. |
| LumPortDeviceInterfaceSpeed | INTEGER { fastEthernet(0), gbE(1) } | current | The speed of an interface of an SD. |
| LumPortDeviceMasterSlaveRole | INTEGER { msMaster(0), msSlave(1), msAuto(2), msNotAvailable(254), msNotApplicable(255) } | current | Represents a master-slave role of an interface of an SD. |
| LumPortDeviceMdixMode | INTEGER { mdi(0), mdix(1), mdiNotAvailable(254), mdiNotApplicable(255) } | current | Represents the MDI/MDIX mode of an SD. |
| LumPortDevicePauseMode | INTEGER { pauseDisabled(0), pauseEnabled(1), pauseTxEnabledRxDisabled(2), pauseTxDisabledRxEnabled(3), pauseAuto(4), pauseNotAvailable(254), pauseNotApplicable(255) } | current | Represents a pause mode of an interface of an SD. |