LUM-PW-MIB
96 objects
The MIB module for management of Pseudowires. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The generic table contains generic information and configuration applicable to all types of pseudowires. All created pseudowires will be represented by an entry in this table. (3) The MPLS table contains MPLS specific information and configuration. A pseudowire configured to run over a MPLS packet switched network will be represented by an entry in this table. (4) The Ethernet table contains specific information and configuration for all pseudowires configured to carry Ethernet traffic. An Ethernet pseudowire will be represented by one entry in this table. (5) The multi-segment pseudowire table contains specific information and configuration for all multi-segment pseudowires. A multi-segment pseudowire will be represented by on entry in this table. Generic table is used for all pseudowires. MPLS table and Ethernet table are only used for edge pseudowire, while multi-segment table is specifically used for multi-segment pseudowire.
Imported Objects
| LUM-REG | lumModules lumPwMIB |
| LUM-TC | CommandString MgmtNameString MplsLabel PortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.41 | IdentitylumPwMIBModule | The MIB module for management of Pseudowires. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and t… | ||
| 1.3.6.1.4.1.8708.2.41.1 | NodelumPwConfs | |||
| 1.3.6.1.4.1.8708.2.41.1.1 | NodelumPwGroups | |||
| 1.3.6.1.4.1.8708.2.41.1.1.1 | GrouppwGeneralGroupV1 | deprecated | The general objects. | |
| 1.3.6.1.4.1.8708.2.41.1.1.2 | GrouppwGenericGroupV1 | deprecated | The generic pseudowire objects (R18.0). | |
| 1.3.6.1.4.1.8708.2.41.1.1.3 | GrouppwMplsGroupV1 | deprecated | The mpls pseudowire objects (R18.0). | |
| 1.3.6.1.4.1.8708.2.41.1.1.4 | GrouppwEnetGroupV1 | deprecated | The ethernet pseudowire objects (R18.0). | |
| 1.3.6.1.4.1.8708.2.41.1.1.5 | GrouppwEnetGroupV2 | deprecated | The ethernet pseudowire objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.41.1.1.6 | GrouppwGeneralGroupV2 | current | The general objects (R20.0) | |
| 1.3.6.1.4.1.8708.2.41.1.1.7 | GrouppwMspwGroupV1 | current | The multi-segment pseudowire objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.41.1.1.8 | GrouppwGenericGroupV2 | deprecated | The generic pseudowire objects (R20.0). | |
| 1.3.6.1.4.1.8708.2.41.1.1.9 | GrouppwEnetGroupV3 | current | The ethernet pseudowire objects (R28.0). | |
| 1.3.6.1.4.1.8708.2.41.1.1.10 | GrouppwGenericGroupV3 | current | The generic pseudowire objects (R28.0). | |
| 1.3.6.1.4.1.8708.2.41.1.1.11 | GrouppwMplsGroupV2 | deprecated | The mpls pseudowire objects (R28.0). | |
| 1.3.6.1.4.1.8708.2.41.1.1.12 | GrouppwMplsGroupV3 | current | The mpls pseudowire objects (R30.0). | |
| 1.3.6.1.4.1.8708.2.41.1.2 | NodelumPwCompl | |||
| 1.3.6.1.4.1.8708.2.41.1.2.1 | CompliancelumPwBasicComplV1 | deprecated | Basic implementation requirements for the pseudowire MIB. (R18.0) | |
| 1.3.6.1.4.1.8708.2.41.1.2.2 | CompliancelumPwBasicComplV2 | deprecated | Basic implementation requirements for the pseudowire MIB. (R20.0) | |
| 1.3.6.1.4.1.8708.2.41.1.2.3 | CompliancelumPwBasicComplV3 | deprecated | Basic implementation requirements for the pseudowire MIB. (R28.0) | |
| 1.3.6.1.4.1.8708.2.41.1.2.4 | CompliancelumPwBasicComplV4 | current | Basic implementation requirements for the pseudowire MIB. (R30.1) | |
| 1.3.6.1.4.1.8708.2.41.2 | NodelumPwMIBObjects | |||
| 1.3.6.1.4.1.8708.2.41.2.1 | NodepwGeneral | |||
| 1.3.6.1.4.1.8708.2.41.2.1.1 | ScalarpwGeneralLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.41.2.1.2 | ScalarpwGeneralStateLastChangeTime | read-only | current | The time when the state of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.41.2.1.3 | ScalarpwGeneralPwGenericTableSize | read-only | current | Size of generic pseudowire table |
| 1.3.6.1.4.1.8708.2.41.2.1.4 | ScalarpwGeneralPwMplsTableSize | read-only | current | Size of MPLS pseudowire table |
| 1.3.6.1.4.1.8708.2.41.2.1.5 | ScalarpwGeneralPwEnetTableSize | read-only | current | Size of Ethernet pseudowire table |
| 1.3.6.1.4.1.8708.2.41.2.1.6 | ScalarpwGeneralPwMspwTableSize | read-only | current | Size of multi-segment pseudowire table |
| 1.3.6.1.4.1.8708.2.41.2.2 | NodepwGenericList | |||
| 1.3.6.1.4.1.8708.2.41.2.2.1 | TablepwGenericTable | not-accessible | current | The generic pseudowire list. |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1 | RowpwGenericEntry | not-accessible | current | An entry in the generic pseudowire list. Each entry represents a pseudowire. |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.1 | ColumnpwGenericIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.2 | ColumnpwGenericName | read-only | current | The management name of the pseudowire, for example 'pw:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the … |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.3 | ColumnpwGenericIdentifier | read-create | current | Unique identifier used for referencing this object. |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.4 | ColumnpwGenericInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.5 | ColumnpwGenericDescr | read-write | current | User configurable label for describing the pseudowire. |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.6 | ColumnpwGenericOutboundLabel | read-create | current | The pseudowire label used in the outbound direction, Actual label range is 16-1048575, 0-15 is reserved. (i.e. towards the PSN) Only valid for edge pseudowire. |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.7 | ColumnpwGenericInboundLabel | read-create | current | The pseudowire label used in the the inbound direction, Actual label range is 16-1048575, 0-15 is reserved. (i.e. from the PSN) Only valid for edge pseudowire. |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.8 | ColumnpwGenericInPackets | read-only | current | This value represents the number of frames received by this pseudowire since last reset of counters. Continuous (free running) pseudowire counter. Only valid f… |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.9 | ColumnpwGenericInBytes | read-only | current | This value represents the number of bytes received by this pseudowire since last reset of counters. Continuous (free running) pseudowire counter. Only valid fo… |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.10 | ColumnpwGenericOutPackets | read-only | current | This value represents the number of frames sent by this pseudowire since last reset of counters. Continuous (free running) pseudowire counter. Only valid for e… |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.11 | ColumnpwGenericOutBytes | read-only | current | This value represents the number of bytes sent by this pseudowire since last reset of counters. Continuous (free running) pseudowire counter. Only valid for ed… |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.12 | ColumnpwGenericResetCont | read-write | current | Reset the continuous (free running) pseudowire counters. After a successful reset the default value (normal) is restored in this action attribute. Only valid f… |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.13 | ColumnpwGenericRowStatus | read-create | current | Manages creation and deletion of conceptual rows via snmp. See also SNMPv2-TC. This object is only valid for creation and deletion of edge pseudowire. The corr… |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.14 | ColumnpwGenericPwType | read-create | current | The type of pseudowire. Edge pseudowire spans a single segment between two PEs. The pseudowire label is unchanged between the originating and terminating PEs. … |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.15 | ColumnpwGenericTrafficClass | read-write | current | The entry signifies the Traffic Class set on the traffic on entering the pseudowire. Setting the traffic class to -1 is not supported. |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.16 | ColumnpwGenericReservedBW | read-write | current | Bandwidth reserved by the pseudowire. Default value is 0 and indicates that no bandwidth has been allocated by the pseudowire. |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.17 | ColumnpwGenericPwNumber | read-create | current | Pseudowire number is used for index calculations The number is unique and generated by system. |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.18 | ColumnpwGenericConfigurationSet | read-only | current | PW configuartion set in hardware true - Indicates that the configuration is set false - Indicates that the configuration is not set |
| 1.3.6.1.4.1.8708.2.41.2.2.1.1.19 | ColumnpwGenericFlowLabel | read-create | current | Flow label |
| 1.3.6.1.4.1.8708.2.41.2.3 | NodepwMplsList | |||
| 1.3.6.1.4.1.8708.2.41.2.3.1 | TablepwMplsTable | not-accessible | current | The MPLS pseudowire list. |
| 1.3.6.1.4.1.8708.2.41.2.3.1.1 | RowpwMplsEntry | not-accessible | current | An entry in the MPLS pseudowire list. Each entry represents one tunnel mapped to a pseudowire. |
| 1.3.6.1.4.1.8708.2.41.2.3.1.1.1 | ColumnpwMplsIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.41.2.3.1.1.2 | ColumnpwMplsName | read-only | current | The management name of the pseudowire, for example 'pw:1:2:id', where the first number indicates subrack, the second slot number and the id is the same as the … |
| 1.3.6.1.4.1.8708.2.41.2.3.1.1.3 | ColumnpwMplsIdentifier | read-create | current | Unique identifier used for referencing this object. This will be identical to the identifier of the corresponding entry generic pseudowire entry in pwTable. |
| 1.3.6.1.4.1.8708.2.41.2.3.1.1.4 | ColumnpwMplsInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.41.2.3.1.1.5 | ColumnpwMplsOutboundTunnelId | read-create | current | The identifier of the MPLS tunnel that the pseudowire is connected to. |
| 1.3.6.1.4.1.8708.2.41.2.3.1.1.6 | ColumnpwMplsAssociateTunnel | read-only | deprecated | Internal command for connecting a pseudowire to a MPLS tunnel object. The MPLS tunnel is intended to carry the pseudowire traffic. The reference will be displa… |
| 1.3.6.1.4.1.8708.2.41.2.3.1.1.7 | ColumnpwMplsRowStatus | read-create | current | Manages creation and deletion of conceptual rows via snmp. See also SNMPv2-TC. This object is only valid for creation and deletion of edge pseudowire. Note: Th… |
| 1.3.6.1.4.1.8708.2.41.2.4 | NodepwEnetList | |||
| 1.3.6.1.4.1.8708.2.41.2.4.1 | TablepwEnetTable | not-accessible | current | The Ethernet pseudowire list. |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1 | RowpwEnetEntry | not-accessible | current | An entry in the pw ethernet list. Every entry represents one PW classification mapped to a pseudowire, together with a VLAN operation. |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.1 | ColumnpwEnetIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.2 | ColumnpwEnetName | read-only | current | The management name of the pseudowire, for example 'pw:1:2:id', where the first number indicates subrack, the second slot number and the id is the same as the … |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.3 | ColumnpwEnetIdentifier | read-create | current | This is an unique identifier used for referencing this object. The identifier will be used as reference to the pwEnet object in the generic pwTable. |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.4 | ColumnpwEnetInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.5 | ColumnpwEnetPortVlan | read-create | current | This attribute defines if the mapping between the original port to the pseudowire is VLAN based or not. In case of VLAN mapping, this object indicates the VLAN… |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.6 | ColumnpwEnetPortIndex | read-create | current | This attribute defines the index of the port associated with this pseudowire for point-to-point Ethernet service. |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.7 | ColumnpwEnetPortName | read-only | current | This attribute defines the name of the port associated with this pseudowire for point-to-point Ethernet service. |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.8 | ColumnpwEnetTpid | read-create | current | This attribute defines ether type tag information for the mapping of VLAN on the entry port. |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.9 | ColumnpwEnetRowStatus | read-create | current | Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the… |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.10 | ColumnpwEnetClassification | read-create | current | Unique identifier for the policy classification connected to pseudowire. The policy classification is located in mesClass table. Only valid when pseudowire cla… |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.11 | ColumnpwEnetFecType | read-create | current | This object indicates the mapping between the original port to the pseudowire. port (0) portVlan (1) The attributes portVlan indicates the VLAN value on the or… |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.12 | ColumnpwEnetSdTagVlanActionIngress | read-only | current | This attribute indicates the mode of VLAN handling between the port or the virtual port associated with the pseudowire and the pseudowire encapsulation. Action… |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.13 | ColumnpwEnetSdTagVlanIngress | read-create | current | This attribute defines the (service-delimiting) VLAN field value on the pseudowire. The value 4095 is used when the attribute is not applicable. |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.14 | ColumnpwEnetSdTagVlanActionEgress | read-create | current | This attribute indicates the mode of VLAN handling between the pseudowire encapsulation and the port or the virtual port associated with the pseudowire. Action… |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.15 | ColumnpwEnetSdTagVlanEgress | read-create | current | This attribute defines the (service-delimiting) VLAN field value on the pseudowire. The value 4095 is used when the attribute is not applicable. |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.16 | ColumnpwEnetOpMode | read-create | current | An Ethernet pseudowire operates in one of the tree modes: transparent (0) independent of their structure. No action is performed on traffic either entering or … |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.17 | ColumnpwEnetIfNo | read-create | current | The physical interface number of the multi-connector port. |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.18 | ColumnpwEnetTxPort | read-create | current | The physical port that this pseudowire is bound to. |
| 1.3.6.1.4.1.8708.2.41.2.4.1.1.19 | ColumnpwEnetInterfaceName | read-create | current | Name of the Interface connected to pw. |
| 1.3.6.1.4.1.8708.2.41.2.5 | NodepwMspwList | |||
| 1.3.6.1.4.1.8708.2.41.2.5.1 | TablepwMspwTable | not-accessible | current | The multi-segment pseudowire list. |
| 1.3.6.1.4.1.8708.2.41.2.5.1.1 | RowpwMspwEntry | not-accessible | current | An entry in the ms-pw list. |
| 1.3.6.1.4.1.8708.2.41.2.5.1.1.1 | ColumnpwMspwIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.41.2.5.1.1.2 | ColumnpwMspwName | read-only | current | The management name of the pseudowire, for example 'mspw:1:2:id', where the first number indicates subrack, the second slot number and the id is the same as th… |
| 1.3.6.1.4.1.8708.2.41.2.5.1.1.3 | ColumnpwMspwIdentifier | read-create | current | Unique identifier used for referencing this object. This will be identical to the identifier of the corresponding entry generic pseudowire entry in pwTable. |
| 1.3.6.1.4.1.8708.2.41.2.5.1.1.4 | ColumnpwMspwInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.41.2.5.1.1.5 | ColumnpwMspwEastInboundLabel | read-create | current | The east pseudowire label used in the the inbound direction, Actual label range is 16-1048575, 0-15 is reserved. |
| 1.3.6.1.4.1.8708.2.41.2.5.1.1.6 | ColumnpwMspwEastOutboundLabel | read-create | current | The east pseudowire label used in the the outbound direction, Actual label range is 16-1048575, 0-15 is reserved. |
| 1.3.6.1.4.1.8708.2.41.2.5.1.1.7 | ColumnpwMspwEastOutboundTunnelId | read-create | current | The identifier of the MPLS tunnel intended to carry the pseudowire traffic. |
| 1.3.6.1.4.1.8708.2.41.2.5.1.1.8 | ColumnpwMspwWestInboundLabel | read-create | current | The west pseudowire label used in the the inbound direction, Actual label range is 16-1048575, 0-15 is reserved. |
| 1.3.6.1.4.1.8708.2.41.2.5.1.1.9 | ColumnpwMspwWestOutboundLabel | read-create | current | The west pseudowire label used in the the outbound direction, Actual label range is 16-1048575, 0-15 is reserved. |
| 1.3.6.1.4.1.8708.2.41.2.5.1.1.10 | ColumnpwMspwWestOutboundTunnelId | read-create | current | The identifier of the MPLS tunnel intended to carry the pseudowire traffic. |
| 1.3.6.1.4.1.8708.2.41.2.5.1.1.11 | ColumnpwMspwRowStatus | read-create | current | Manages creation and deletion of conceptual rows. See also SNMPv2-TC. This object is used for creation and deletion of multi-segment pseudowire. The correspond… |