MIB Viewer

LUM-ROADM-MIB

184 objects
The reconfigurable add/drop module MIB. - General - Reconfigurable add/drop interfaces
Imported Objects
LUM-REGlumModules lumRoadmMIB
LUM-TCBoardOrInterfaceAdminStatus BoardOrInterfaceOperStatus CommandString FaultStatus LambdaFrequency MgmtNameString ObjectProperty PortNumber SlotNumber SubrackNumber
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIInteger32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.8708.1.1.31IdentitylumRoadmMIBModuleThe reconfigurable add/drop module MIB. - General - Reconfigurable add/drop interfaces
1.3.6.1.4.1.8708.2.31.1NodelumRoadmConfs
1.3.6.1.4.1.8708.2.31.1.1NodelumRoadmGroups
1.3.6.1.4.1.8708.2.31.1.1.1GrouproadmGeneralGroupdeprecatedThe general objects.
1.3.6.1.4.1.8708.2.31.1.1.2GrouproadmAddDropIfGroupdeprecatedThe ROADM interface objects.
1.3.6.1.4.1.8708.2.31.1.1.3GrouproadmLineIfGroupdeprecatedThe ROADM interface objects.
1.3.6.1.4.1.8708.2.31.1.1.4GrouproadmAddDropIfGroupV2deprecatedThe ROADM interface objects.
1.3.6.1.4.1.8708.2.31.1.1.5GrouproadmGroupRoadmGroupdeprecatedThe ROADM interface objects.
1.3.6.1.4.1.8708.2.31.1.1.6GrouproadmGeneralGroupV2deprecatedThe general objects v2.
1.3.6.1.4.1.8708.2.31.1.1.7GrouproadmGroupLineGroupcurrentThe ROADM Line Group objects.
1.3.6.1.4.1.8708.2.31.1.1.8GrouproadmLineGroupcurrentThe ROADM Line objects.
1.3.6.1.4.1.8708.2.31.1.1.9GrouproadmChannelGroupcurrentThe ROADM Channel objects. (12.0)
1.3.6.1.4.1.8708.2.31.1.1.10GrouproadmAddDropIfGroupV3deprecatedThe ROADM interface objects. (12.0)
1.3.6.1.4.1.8708.2.31.1.1.11GrouproadmLineIfGroupV2deprecatedThe ROADM interface objects V2 (12.0).
1.3.6.1.4.1.8708.2.31.1.1.12GrouproadmGroupRoadmGroupV2deprecatedThe ROADM interface objects V2.(12.0)
1.3.6.1.4.1.8708.2.31.1.1.13GrouproadmGeneralGroupV3currentThe general objects v3. (12.0)
1.3.6.1.4.1.8708.2.31.1.1.14GrouproadmAddDropIfGroupV4deprecatedThe ROADM interface objects v4. (15.0)
1.3.6.1.4.1.8708.2.31.1.1.15GrouproadmGroupRoadmGroupV3currentThe ROADM interface objects V3.(15.0)
1.3.6.1.4.1.8708.2.31.1.1.16GrouproadmLineIfGroupV3currentThe ROADM interface objects V3 (15.0).
1.3.6.1.4.1.8708.2.31.1.1.17GrouproadmAddDropIfGroupV5currentThe ROADM interface objects v5. (28.0)
1.3.6.1.4.1.8708.2.31.1.2NodelumRoadmCompl
1.3.6.1.4.1.8708.2.31.1.2.1CompliancelumRoadmBasicComplV1deprecatedBasic implementation requirements for the ROADM MIB V1.
1.3.6.1.4.1.8708.2.31.1.2.2CompliancelumRoadmBasicComplV2deprecatedBasic implementation requirements for the ROADM MIB V2. (10.0)
1.3.6.1.4.1.8708.2.31.1.2.3CompliancelumRoadmBasicComplV3deprecatedBasic implementation requirements for the ROADM MIB V3. (12.0)
1.3.6.1.4.1.8708.2.31.1.2.4CompliancelumRoadmBasicComplV4deprecatedBasic implementation requirements for the ROADM MIB V4. (14.0)
1.3.6.1.4.1.8708.2.31.1.2.5CompliancelumRoadmBasicComplV5deprecatedBasic implementation requirements for the ROADM MIB V5. (15.0)
1.3.6.1.4.1.8708.2.31.1.2.6CompliancelumRoadmBasicComplV6deprecatedBasic implementation requirements for the ROADM MIB V5. (15.0)
1.3.6.1.4.1.8708.2.31.1.2.7CompliancelumRoadmBasicComplV7currentBasic implementation requirements for the ROADM MIB V7. (28.0)
1.3.6.1.4.1.8708.2.31.1.3NodelumRoadmMinimalGroups
1.3.6.1.4.1.8708.2.31.1.4NodelumRoadmMinimalCompl
1.3.6.1.4.1.8708.2.31.2NodelumRoadmMIBObjects
1.3.6.1.4.1.8708.2.31.2.1NoderoadmGeneral
1.3.6.1.4.1.8708.2.31.2.1.1ScalarroadmGeneralConfigLastChangeTimeread-onlycurrentThe time when the configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.31.2.1.2ScalarroadmGeneralStateLastChangeTimeread-onlycurrentThe time when the state of the MIB was last changed.
1.3.6.1.4.1.8708.2.31.2.1.3ScalarroadmGeneralRoadmAddDropIfTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.31.2.1.4ScalarroadmGeneralRoadmLineIfTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.31.2.1.5ScalarroadmGeneralRoadmGroupRoadmTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.31.2.1.6ScalarroadmGeneralRoadmGroupLineTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.31.2.1.7ScalarroadmGeneralRoadmLineTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.31.2.1.8ScalarroadmGeneralChannelTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.31.2.2NoderoadmAddDropIfList
1.3.6.1.4.1.8708.2.31.2.2.1TableroadmAddDropIfTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.31.2.2.1.1RowroadmAddDropIfEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.31.2.2.1.1.1ColumnroadmAddDropIfIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.31.2.2.1.1.2ColumnroadmAddDropIfNameread-onlycurrentThe management name of the interface, for example 'roadmAddDrop:1:2:1-2', where the first number indicates sub-rack, the second slot number and the third is th…
1.3.6.1.4.1.8708.2.31.2.2.1.1.3ColumnroadmAddDropIfDescrread-writecurrentUser configurable label. This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.31.2.2.1.1.4ColumnroadmAddDropIfSubrackread-createcurrentThe number of the subrack where the interface is located.
1.3.6.1.4.1.8708.2.31.2.2.1.1.5ColumnroadmAddDropIfSlotread-createcurrentThe number of the slot where the interface is located.
1.3.6.1.4.1.8708.2.31.2.2.1.1.6ColumnroadmAddDropIfTxPortread-createcurrentThe number of the port where the TX-side of the interface is located.
1.3.6.1.4.1.8708.2.31.2.2.1.1.7ColumnroadmAddDropIfRxPortread-createcurrentThe number of the port where the RX-side of the interface is located.
1.3.6.1.4.1.8708.2.31.2.2.1.1.8ColumnroadmAddDropIfInvPhysIndexOrZeroread-onlycurrentThe row in the invPhysTable for this interface. Set to 0 if not known.
1.3.6.1.4.1.8708.2.31.2.2.1.1.9ColumnroadmAddDropIfAdminStatusread-writecurrentThe administrative state for the interface. down - The interface should be inactive (i.e dark mode). service - The interface is activated but alarms are suppre…
1.3.6.1.4.1.8708.2.31.2.2.1.1.10ColumnroadmAddDropIfOperStatusread-onlycurrentThe operational state for the interface. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventi…
1.3.6.1.4.1.8708.2.31.2.2.1.1.11ColumnroadmAddDropIfTemperatureread-onlycurrentThe temperature in the add/drop module in 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.31.2.2.1.1.12ColumnroadmAddDropIfDropFrequencyMinread-onlycurrentLowest added channel in hundreds of GHz (0.01 GHz). Supported range 19185 ... 19598 (ch9185 .. ch958) This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.31.2.2.1.1.13ColumnroadmAddDropIfDropFrequencyMaxread-onlycurrentHighest added channel in hundreds of GHz (0.01 GHz). Supported range 19185 ... 19580 (ch9185 .. ch958) This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.31.2.2.1.1.14ColumnroadmAddDropIfObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.31.2.2.1.1.15ColumnroadmAddDropIfConfigurationCommandread-onlycurrentConfigure the drop frequencies. Express mode - All the channels will go through the express port of the drop section (Ext Tx). No channels will go through the …
1.3.6.1.4.1.8708.2.31.2.2.1.1.16ColumnroadmAddDropIfModuleFailureread-onlycurrentThe module HW has detected a failure. A: The module has failed D: The module is OK again
1.3.6.1.4.1.8708.2.31.2.2.1.1.17ColumnroadmAddDropIfTxSignalStatusread-onlycurrentThe operational state for the dropped (TX) signal of the interface. down - The signal is turned off. degraded - The signal quality is impaired. up - The signal…
1.3.6.1.4.1.8708.2.31.2.2.1.1.18ColumnroadmAddDropIfModeread-onlycurrentThe drop mode for the interface. express - No wavelengths are dropped. drop - Up to eight (15 if 50 GHz spacing is used) channels are possible to drop. This at…
1.3.6.1.4.1.8708.2.31.2.2.1.1.19ColumnroadmAddDropIfDescr2read-writecurrentUser configurable label. This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.31.2.2.1.1.20ColumnroadmAddDropIfSpacingModeread-onlycurrentThe spacing mode of the interface. spacing100GHz: Only 100GHz channels are available as drop frequencies. spacing50GHz: Both 50GHz and 100GHz channels are avai…
1.3.6.1.4.1.8708.2.31.2.2.1.1.21ColumnroadmAddDropIfGuardChannel1read-onlycurrentWhen 50GHz spacing is used, the channel before the minDropFrequency cannot be used for express traffic. This channel is considered as a guard channel.
1.3.6.1.4.1.8708.2.31.2.2.1.1.22ColumnroadmAddDropIfGuardChannel2read-onlycurrentWhen 50GHz spacing is used, the channel after the maxDropFrequency cannot be used for express traffic. This channel is considered as a guard channel.
1.3.6.1.4.1.8708.2.31.2.2.1.1.23ColumnroadmAddDropIfDropFrequencyLimitMinread-createcurrentWhen an Allocated Range is defined, it is not possible to add channels outside the range. The supported range is: roadm1x2G50: [19185 .. 19580] (ch9185 .. ch95…
1.3.6.1.4.1.8708.2.31.2.2.1.1.24ColumnroadmAddDropIfDropFrequencyLimitMaxread-createcurrentWhen an Allocated Channel Range is defined, it is not possible to add channels outside the range. The supported range is: roadm1x2G50: [19185 .. 19580] (ch9185…
1.3.6.1.4.1.8708.2.31.2.2.1.1.25ColumnroadmAddDropIfLimitConfigurationCommandread-onlycurrentWhen an Allocated Channel Range is defined, it is not possible to add channels outside the range.
1.3.6.1.4.1.8708.2.31.2.2.1.1.26ColumnroadmAddDropIfGroupRoadmModeread-onlycurrentIndicates whether the interface is grouped into a ROADM-ROADM-group. disabled - The interface is not grouped into a ROADM-ROADM-group. enabled - The interface …
1.3.6.1.4.1.8708.2.31.2.2.1.1.27ColumnroadmAddDropIfPasswdread-createcurrentPassword protecting the Allocated Channel Range. If passwd is '-' (dash), then the password controll is disabled.
1.3.6.1.4.1.8708.2.31.2.2.1.1.28ColumnroadmAddDropIfPasswdConfigread-onlycurrentChange the password protecting the Allocated Channel Range.
1.3.6.1.4.1.8708.2.31.2.2.1.1.29ColumnroadmAddDropIfGroupLineModeread-onlycurrentIndicates whether the interface is grouped into a ROADM-TU-group. disabled - The interface is not grouped into a ROADM-TU-group. enabled - The interface is gro…
1.3.6.1.4.1.8708.2.31.2.2.1.1.30ColumnroadmAddDropIfNoOfConnectedChannelsread-onlycurrentThe number of channels connected to this port.
1.3.6.1.4.1.8708.2.31.2.2.1.1.31ColumnroadmAddDropIfViewChannelListread-onlycurrentShows a list of all channels connected to this port. This attribute is only used for presentation.
1.3.6.1.4.1.8708.2.31.2.2.1.1.32ColumnroadmAddDropIfConnectedChannelMaskread-createcurrentShows a list of all channels connected to this port. Format: '<start-freq>:<spacing>:<bit-mask>' This is the actual storage of the cross-connect info.
1.3.6.1.4.1.8708.2.31.2.2.1.1.33ColumnroadmAddDropIfAddChannelCommandread-onlycurrentSpecify that a new channel shall be added from this port.
1.3.6.1.4.1.8708.2.31.2.2.1.1.34ColumnroadmAddDropIfUnlinkChannelCommandread-onlycurrentSpecify that a channel shall be removed (disconnected) from this port.
1.3.6.1.4.1.8708.2.31.2.2.1.1.35ColumnroadmAddDropIfUnlinkAllChannelsCommandread-onlycurrentConfirm that all channels shall be removed (disconnected) from this port.
1.3.6.1.4.1.8708.2.31.2.2.1.1.36ColumnroadmAddDropIfSetAttenuationCommandread-onlycurrentSet a fixed attenuation for channels connected to this port. Control-loop regulated channels are not affected. Range: 0 to 15.0 dB
1.3.6.1.4.1.8708.2.31.2.2.1.1.37ColumnroadmAddDropIfAdjustAttenuationDeltaCommandread-onlycurrentIncrease or decrease the attenuation for channels connected to this port. Control-loop regulated channels are not affected. The resulting attenuation will alwa…
1.3.6.1.4.1.8708.2.31.2.2.1.1.38ColumnroadmAddDropIfConnectChannelCmdread-writecurrentThis is a 'write-only' parameter that the TNM can use to cross-connect a new channel. When you read the parameter, you will get an integer value that is increm…
1.3.6.1.4.1.8708.2.31.2.2.1.1.39ColumnroadmAddDropIfDisconnectChannelCmdread-writecurrentThis is a 'write-only' parameter that the TNM can use to disconnect a channel. When you read the parameter, you will get an integer value that is incremented e…
1.3.6.1.4.1.8708.2.31.2.2.1.1.40ColumnroadmAddDropIfGroupIndexread-onlycurrentThe index of the associated ROADM-group, if any. If no group is created, it is set to 0
1.3.6.1.4.1.8708.2.31.2.2.1.1.41ColumnroadmAddDropIfAddAllChannelCommandread-onlycurrentAll available channels shall be added from this port.
1.3.6.1.4.1.8708.2.31.2.2.1.1.42ColumnroadmAddDropIfSetAdminStatusCommandread-onlycurrentSet administrative status for channels that are connected to this port. Control-loop regulated channels are not affected.
1.3.6.1.4.1.8708.2.31.2.2.1.1.43ColumnroadmAddDropIfSpacingHwCapabilityread-onlycurrentThe hardware capability of the interface used when deciding whether an interface is compatible with another interface and thereby can form a ROADM-ROADM group …
1.3.6.1.4.1.8708.2.31.2.3NoderoadmLineIfList
1.3.6.1.4.1.8708.2.31.2.3.1TableroadmLineIfTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.31.2.3.1.1RowroadmLineIfEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.31.2.3.1.1.1ColumnroadmLineIfIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.31.2.3.1.1.2ColumnroadmLineIfNameread-onlycurrentThe management name of the interface, for example 'roadmLine:1:2:1-2', where the first number indicates sub-rack, the second slot number and the third is the p…
1.3.6.1.4.1.8708.2.31.2.3.1.1.3ColumnroadmLineIfDescrread-writecurrentUser configurable label. This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.31.2.3.1.1.4ColumnroadmLineIfSubrackread-createcurrentThe number of the subrack where the interface is located.
1.3.6.1.4.1.8708.2.31.2.3.1.1.5ColumnroadmLineIfSlotread-createcurrentThe number of the slot where the interface is located.
1.3.6.1.4.1.8708.2.31.2.3.1.1.6ColumnroadmLineIfTxPortread-createcurrentThe number of the port where the TX-side of the interface is located.
1.3.6.1.4.1.8708.2.31.2.3.1.1.7ColumnroadmLineIfRxPortread-createcurrentThe number of the port where the RX-side of the interface is located.
1.3.6.1.4.1.8708.2.31.2.3.1.1.8ColumnroadmLineIfInvPhysIndexOrZeroread-onlycurrentThe row in the invPhysTable for this interface. Set to 0 if not known.
1.3.6.1.4.1.8708.2.31.2.3.1.1.9ColumnroadmLineIfAdminStatusread-writecurrentThe administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended f…
1.3.6.1.4.1.8708.2.31.2.3.1.1.10ColumnroadmLineIfOperStatusread-onlycurrentThe operational state for the interface. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventi…
1.3.6.1.4.1.8708.2.31.2.3.1.1.11ColumnroadmLineIfObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.31.2.3.1.1.12ColumnroadmLineIfTxSignalStatusread-onlycurrentThe operational state for outgoing (TX) signal of the interface. down - The signal is turned off. degraded - The signal quality is impaired. up - The signal is…
1.3.6.1.4.1.8708.2.31.2.3.1.1.13ColumnroadmLineIfNoOfConnectedChannelsread-onlycurrentThe number of channels connected to this port.
1.3.6.1.4.1.8708.2.31.2.3.1.1.14ColumnroadmLineIfViewChannelListread-onlycurrentShows a list of all channels connected to any add/drop port.
1.3.6.1.4.1.8708.2.31.2.3.1.1.15ColumnroadmLineIfSetAttenuationCommandread-onlycurrentSet a fixed attenuation for channels connected to this port. Control-loop regulated channels are not affected. Range: 0 to 15.0 dB
1.3.6.1.4.1.8708.2.31.2.3.1.1.16ColumnroadmLineIfAdjustAttenuationDeltaCommandread-onlycurrentIncrease or decrease the attenuation for channels connected to this port. Control-loop regulated channels are not affected. Range: -15.0 to 15.0 dB
1.3.6.1.4.1.8708.2.31.2.3.1.1.17ColumnroadmLineIfMonitorInsertionLossread-onlycurrentThe insertion loss for the monitor port.
1.3.6.1.4.1.8708.2.31.2.3.1.1.18ColumnroadmLineIfSetAdminStatusCommandread-onlycurrentSet administrative status for channels that are connected to this port. Control-loop regulated channels are not affected.
1.3.6.1.4.1.8708.2.31.2.4NoderoadmGroupRoadmList
1.3.6.1.4.1.8708.2.31.2.4.1TableroadmGroupRoadmTablenot-accessiblecurrentThe roadm group table.
1.3.6.1.4.1.8708.2.31.2.4.1.1RowroadmGroupRoadmEntrynot-accessiblecurrentAn entry in the roadm group table.
1.3.6.1.4.1.8708.2.31.2.4.1.1.1ColumnroadmGroupRoadmIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.31.2.4.1.1.2ColumnroadmGroupRoadmNameread-onlycurrentThe name of the object, for example 'roadm:1:2:1:1:3:1', where the numbers indicate the subrack, slot and TX port number for the left and right add-drop interf…
1.3.6.1.4.1.8708.2.31.2.4.1.1.3ColumnroadmGroupRoadmDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.31.2.4.1.1.4ColumnroadmGroupRoadmRightSubrackread-createcurrentThe subrack number for the right add-drop interface.
1.3.6.1.4.1.8708.2.31.2.4.1.1.5ColumnroadmGroupRoadmRightSlotread-createcurrentThe slot number for the right add-drop interface.
1.3.6.1.4.1.8708.2.31.2.4.1.1.6ColumnroadmGroupRoadmRightPortread-createcurrentThe port number for the TX side of the right add-drop interface.
1.3.6.1.4.1.8708.2.31.2.4.1.1.7ColumnroadmGroupRoadmLeftSubrackread-createcurrentThe subrack number for the left add-drop interface.
1.3.6.1.4.1.8708.2.31.2.4.1.1.8ColumnroadmGroupRoadmLeftSlotread-createcurrentThe slot number for the left add-drop interface.
1.3.6.1.4.1.8708.2.31.2.4.1.1.9ColumnroadmGroupRoadmLeftPortread-createcurrentThe port number for the TX side of the left add-drop interface.
1.3.6.1.4.1.8708.2.31.2.4.1.1.11ColumnroadmGroupRoadmAdminStatusread-writecurrentThe administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended f…
1.3.6.1.4.1.8708.2.31.2.4.1.1.12ColumnroadmGroupRoadmObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.31.2.4.1.1.14ColumnroadmGroupRoadmDataAdminStatusread-writecurrentThe administrative state for the master/slave add- drop interfaces. down - The interface should be inactive. service - The interface is activated but alarms ar…
1.3.6.1.4.1.8708.2.31.2.4.1.1.15ColumnroadmGroupRoadmDataDropFrequencyMinread-onlycurrentLowest added freqency in hundreds of GHz (0.01 GHz) for the master/slave add-drop interfaces. Supported range 19185 ... 19580 (ch9185 .. ch958) This attribute …
1.3.6.1.4.1.8708.2.31.2.4.1.1.16ColumnroadmGroupRoadmDataDropFrequencyMaxread-onlycurrentHighest added channel in hundreds of GHz (0.01 GHz) Supported range 19185 ... 19580 (ch9185 .. ch958) This attribute can be written via SNMP.
1.3.6.1.4.1.8708.2.31.2.4.1.1.17ColumnroadmGroupRoadmDataDropFrequencyLimitMinread-createcurrentWhen an Allocated Range is defined for the two add-drop interfaces, it is not possible to add channels outside the range. Supported range 19185 ... 19580 (ch91…
1.3.6.1.4.1.8708.2.31.2.4.1.1.18ColumnroadmGroupRoadmDataDropFrequencyLimitMaxread-createcurrentWhen an Allocated Range is defined for the two add-drop interfaces, it is not possible to add channels outside the range. Supported range 19185 ... 19598 (ch91…
1.3.6.1.4.1.8708.2.31.2.4.1.1.19ColumnroadmGroupRoadmDataModeread-createcurrentThe drop mode for the master/slave add-drop interface. express - No wavelengths are dropped. drop - Up to eight (15 if 50 GHz spacing is used) channels are pos…
1.3.6.1.4.1.8708.2.31.2.4.1.1.20ColumnroadmGroupRoadmDataSpacingModeread-createcurrentThe spacing mode of the add-drop interfaces. spacing100GHz: Only 100GHz channels are available as drop frequencies. spacing50GHz: Both 50GHz and 100GHz channel…
1.3.6.1.4.1.8708.2.31.2.4.1.1.21ColumnroadmGroupRoadmConfigurationCommandread-onlycurrentConfigure the drop frequencies for the master/slave add- drop interfaces. Express mode - All the channels will go through the express port of the drop section …
1.3.6.1.4.1.8708.2.31.2.4.1.1.22ColumnroadmGroupRoadmLimitConfigurationCommandread-onlycurrentConfigure the Allocated Channel Range for the two add-drop interfaces. When an Allocated Range is defined, it is not possible to add channels outside the range.
1.3.6.1.4.1.8708.2.31.2.4.1.1.23ColumnroadmGroupRoadmPasswdread-createcurrentPassword protecting the Allocated Channel Range. If passwd is '-' (dash), then the password controll is disabled.
1.3.6.1.4.1.8708.2.31.2.4.1.1.24ColumnroadmGroupRoadmPasswdConfigread-onlycurrentChange the password protecting the Allocated Channel Range for the master/slave add-drop interfaces.
1.3.6.1.4.1.8708.2.31.2.4.1.1.25ColumnroadmGroupRoadmDataGuardChannel1read-onlycurrentWhen 50GHz spacing is used, the channel before the minDropFrequency cannot be used for express traffic. This channel is considered as a guard channel.
1.3.6.1.4.1.8708.2.31.2.4.1.1.26ColumnroadmGroupRoadmDataGuardChannel2read-onlycurrentWhen 50GHz spacing is used, the channel after the maxDropFrequency cannot be used for express traffic. This channel is considered as a guard channel.
1.3.6.1.4.1.8708.2.31.2.4.1.1.27ColumnroadmGroupRoadmNoOfConnectedChannelsread-onlycurrentThe number of channels connected to this group
1.3.6.1.4.1.8708.2.31.2.4.1.1.28ColumnroadmGroupRoadmViewChannelListread-onlycurrentShows a list of all channels connected to this group This attribute is only used for presentation.
1.3.6.1.4.1.8708.2.31.2.4.1.1.29ColumnroadmGroupRoadmConnectedChannelMaskread-createcurrentShows a list of all channels connected to this group Format: '<start-freq>:<spacing>:<bit-mask>' This is the actual storage of the cross-connect info.
1.3.6.1.4.1.8708.2.31.2.4.1.1.30ColumnroadmGroupRoadmAddChannelCommandread-onlycurrentSpecify that a new channel shall be added from this group.
1.3.6.1.4.1.8708.2.31.2.4.1.1.31ColumnroadmGroupRoadmUnlinkChannelCommandread-onlycurrentSpecify that a channel shall be removed (disconnected) from this group
1.3.6.1.4.1.8708.2.31.2.4.1.1.32ColumnroadmGroupRoadmUnlinkAllChannelsCommandread-onlycurrentConfirm that all channels shall be removed (disconnected) from this group
1.3.6.1.4.1.8708.2.31.2.4.1.1.33ColumnroadmGroupRoadmConnectChannelCmdread-writecurrentThis is a 'write-only' parameter that the TNM can use to cross-connect a new channel. When you read the parameter, you will get an integer value that is increm…
1.3.6.1.4.1.8708.2.31.2.4.1.1.34ColumnroadmGroupRoadmDisconnectChannelCmdread-writecurrentThis is a 'write-only' parameter that the TNM can use to disconnect a channel. When you read the parameter, you will get an integer value that is incremented e…
1.3.6.1.4.1.8708.2.31.2.4.1.1.35ColumnroadmGroupRoadmAddAllChannelCommandread-onlycurrentAll available channels shall be added to this group.
1.3.6.1.4.1.8708.2.31.2.5NoderoadmGroupLineList
1.3.6.1.4.1.8708.2.31.2.5.1TableroadmGroupLineTablenot-accessiblecurrentThe roadm-line group table.
1.3.6.1.4.1.8708.2.31.2.5.1.1RowroadmGroupLineEntrynot-accessiblecurrentAn entry in the roadm-line group table.
1.3.6.1.4.1.8708.2.31.2.5.1.1.1ColumnroadmGroupLineIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.31.2.5.1.1.2ColumnroadmGroupLineNameread-onlycurrentThe name of the object, for example 'roadm:1:2:1', where the numbers indicate the subrack, slot and TX port number for the add-drop interface of the group.
1.3.6.1.4.1.8708.2.31.2.5.1.1.3ColumnroadmGroupLineDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.31.2.5.1.1.4ColumnroadmGroupLineSubrackread-createcurrentThe subrack number for the add-drop interface.
1.3.6.1.4.1.8708.2.31.2.5.1.1.5ColumnroadmGroupLineSlotread-createcurrentThe slot number for the add-drop interface.
1.3.6.1.4.1.8708.2.31.2.5.1.1.6ColumnroadmGroupLinePortread-createcurrentThe port number for the TX side of the add-drop interface.
1.3.6.1.4.1.8708.2.31.2.5.1.1.7ColumnroadmGroupLineAdminStatusread-onlycurrentThe administrative state for the interface. down - The interface should be inactive. The ROADM add-drop interface and the line interface are working independen…
1.3.6.1.4.1.8708.2.31.2.5.1.1.8ColumnroadmGroupLineObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.31.2.5.1.1.9ColumnroadmGroupLineCreateLineCommandread-onlycurrentCreate a new line associated to the ROADM in the ROADM-line group. This will create an entry in the line table
1.3.6.1.4.1.8708.2.31.2.5.1.1.10ColumnroadmGroupLineDeleteLineCommandread-onlycurrentDelete a line from the ROADM-line group.
1.3.6.1.4.1.8708.2.31.2.5.1.1.11ColumnroadmGroupLineNoOfLinesread-onlycurrentThe current number of lines associated to this ROADM-line group.
1.3.6.1.4.1.8708.2.31.2.6NoderoadmLineList
1.3.6.1.4.1.8708.2.31.2.6.1TableroadmLineTablenot-accessiblecurrentThe roadm-line table.
1.3.6.1.4.1.8708.2.31.2.6.1.1RowroadmLineEntrynot-accessiblecurrentAn entry in the roadm-line table.
1.3.6.1.4.1.8708.2.31.2.6.1.1.1ColumnroadmLineIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.31.2.6.1.1.2ColumnroadmLineNameread-onlycurrentThe name of the object, for example 'line:1:2:3-4', where the numbers indicate the subrack, slot and TX port number for the line interface.
1.3.6.1.4.1.8708.2.31.2.6.1.1.3ColumnroadmLineDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.31.2.6.1.1.4ColumnroadmLineSubrackread-createcurrentThe subrack number for this line interface.
1.3.6.1.4.1.8708.2.31.2.6.1.1.5ColumnroadmLineSlotread-createcurrentThe slot number for this line interface.
1.3.6.1.4.1.8708.2.31.2.6.1.1.6ColumnroadmLinePortread-createcurrentThe port number for the TX side of this line interface.
1.3.6.1.4.1.8708.2.31.2.6.1.1.7ColumnroadmLineObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.31.2.6.1.1.8ColumnroadmLineGroupIdread-createcurrentThe name of the ROADM-line group, to which this line interface belongs. Persistent cross-reference to ROADM-line group table
1.3.6.1.4.1.8708.2.31.2.6.1.1.9ColumnroadmLineFrequencyMismatchread-onlycurrentFrequency mismatch. A: The actual frequency of the line interface of the traffic unit, is outside the drop frequency band of the ROADM. D: The actual frequency…
1.3.6.1.4.1.8708.2.31.2.6.1.1.10ColumnroadmLineFrequencyUsedread-onlycurrentIndicates whether the frequency is already used by another line in the ROADM-line group. A: The frequency is not unique within the ROADM-line group. D: The fre…
1.3.6.1.4.1.8708.2.31.2.6.1.1.11ColumnroadmLineAdminStatusread-writecurrentThe administrative state for the interface. down - The interface should be inactive (i.e dark mode). service - The interface is activated but alarms are suppre…
1.3.6.1.4.1.8708.2.31.2.7NoderoadmChannelList
1.3.6.1.4.1.8708.2.31.2.7.1TableroadmChannelTablenot-accessiblecurrentThe roadm channel table.
1.3.6.1.4.1.8708.2.31.2.7.1.1RowroadmChannelEntrynot-accessiblecurrentAn entry in the roadm channel table.
1.3.6.1.4.1.8708.2.31.2.7.1.1.1ColumnroadmChannelIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.31.2.7.1.1.2ColumnroadmChannelNameread-onlycurrentThe name of the object, for example 'roadm:1:2:1', where the numbers indicate the subrack, slot and TX port number for the add-drop interface of the group.
1.3.6.1.4.1.8708.2.31.2.7.1.1.3ColumnroadmChannelFrequencyread-onlycurrentThe frequncy of the channel.
1.3.6.1.4.1.8708.2.31.2.7.1.1.4ColumnroadmChannelRoadmLineIfIndexread-onlycurrentThe index of the roadm line i/f carrying this channel.
1.3.6.1.4.1.8708.2.31.2.7.1.1.5ColumnroadmChannelRoadmAddDropIfIndexread-onlycurrentThe index of the roadm add/drop i/f connected to this channel. Zero (0) if not connected.
1.3.6.1.4.1.8708.2.31.2.7.1.1.6ColumnroadmChannelAdminStatusread-writecurrentThe administrative state for the channel. down - The channel is blocked, i.e. the cross connection to addDrop i/f removed. The channel is blocked on the line. …
1.3.6.1.4.1.8708.2.31.2.7.1.1.7ColumnroadmChannelOperStatusread-onlycurrentThe operational state for the channel. notPresent - The physical resources are not available. down - The channel is de-activated or the are faults preventing i…
1.3.6.1.4.1.8708.2.31.2.7.1.1.8ColumnroadmChannelAttenuationread-writecurrentThe additional attenuation applied to the channel excluding the insertion loss.
1.3.6.1.4.1.8708.2.31.2.7.1.1.9ColumnroadmChannelConnectedToInterfaceread-onlycurrentThe name of the addDrop i/f conencted
1.3.6.1.4.1.8708.2.31.2.7.1.1.10ColumnroadmChannelConnectDisconnectCommandread-onlycurrentConnect the channel to an add/drop interface. This command is not available in group mode.