LUM-SATELLITE-MIB
19 objects
The SATELLITE interface and protection group MIB. - General - SATELLITE interfaces
Imported Objects
| LUM-REG | lumModules lumSatelliteMIB |
| LUM-TC | MgmtNameString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.36 | IdentitylumSatelliteMIBModule | The SATELLITE interface and protection group MIB. - General - SATELLITE interfaces | ||
| 1.3.6.1.4.1.8708.2.36.1 | NodelumSatelliteConfs | |||
| 1.3.6.1.4.1.8708.2.36.1.1 | NodelumSatelliteGroups | |||
| 1.3.6.1.4.1.8708.2.36.1.1.1 | GroupsatelliteGeneralGroup | current | The general objects. | |
| 1.3.6.1.4.1.8708.2.36.1.1.2 | GroupsatelliteSatelliteGroup | current | The SATELLITE SATELLITE objects. (15.0) | |
| 1.3.6.1.4.1.8708.2.36.1.2 | NodelumSatelliteCompl | |||
| 1.3.6.1.4.1.8708.2.36.1.2.1 | CompliancelumSatelliteBasicCompl1 | current | Basic implementation requirements for the SATELLITE MIB V1. (15.0) | |
| 1.3.6.1.4.1.8708.2.36.2 | NodelumSatelliteMIBObjects | |||
| 1.3.6.1.4.1.8708.2.36.2.1 | NodesatelliteGeneral | |||
| 1.3.6.1.4.1.8708.2.36.2.1.1 | ScalarsatelliteGeneralLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.36.2.1.2 | ScalarsatelliteGeneralStateLastChangeTime | read-only | current | The time when the state of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.36.2.1.3 | ScalarsatelliteGeneralSatelliteTableSize | read-only | current | Size of table |
| 1.3.6.1.4.1.8708.2.36.2.2 | NodesatelliteSatelliteList | |||
| 1.3.6.1.4.1.8708.2.36.2.2.1 | TablesatelliteSatelliteTable | not-accessible | current | The SATELLITE table. |
| 1.3.6.1.4.1.8708.2.36.2.2.1.1 | RowsatelliteSatelliteEntry | not-accessible | current | An entry in the SATELLITE table. |
| 1.3.6.1.4.1.8708.2.36.2.2.1.1.1 | ColumnsatelliteSatelliteIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.36.2.2.1.1.2 | ColumnsatelliteSatelliteName | read-only | current | The name of the object, for example 'satellite:1:2:1-2', where the numbers indicate the subrack, slot and port numbers. |
| 1.3.6.1.4.1.8708.2.36.2.2.1.1.3 | ColumnsatelliteSatelliteDescr | read-write | current | User configurable label. |
| 1.3.6.1.4.1.8708.2.36.2.2.1.1.4 | ColumnsatelliteSatelliteExpectedBoardType | read-write | current | State which access board that is expected. This is used to show correct number of channels in crossConnect dialogue. |