MIB Viewer

LUM-SDHPDH-MIB

48 objects
The SDHPDH interface and protection group MIB. - General - E1T1 interfaces
Imported Objects
LUM-REGlumModules lumSdhpdhMIB
LUM-TCBoardOrInterfaceAdminStatus BoardOrInterfaceOperStatus CommandString FaultStatus MgmtNameString
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.8708.1.1.35IdentitylumSdhpdhMIBModuleThe SDHPDH interface and protection group MIB. - General - E1T1 interfaces
1.3.6.1.4.1.8708.2.35.1NodelumSdhpdhConfs
1.3.6.1.4.1.8708.2.35.1.1NodelumSdhpdhGroups
1.3.6.1.4.1.8708.2.35.1.1.1GroupsdhpdhGeneralGroupcurrentThe general objects.
1.3.6.1.4.1.8708.2.35.1.1.2GroupsdhpdhE1t1GroupdeprecatedThe SDHPDH E1T1 objects. (15.0)
1.3.6.1.4.1.8708.2.35.1.1.3GroupsdhpdhEquipmentGroupcurrentThe SDHPDH Equipment objects. (16.0)
1.3.6.1.4.1.8708.2.35.1.1.4GroupsdhpdhE1t1GroupV2currentThe SDHPDH E1T1 objects. (17.0)
1.3.6.1.4.1.8708.2.35.1.2NodelumSdhpdhCompl
1.3.6.1.4.1.8708.2.35.1.2.1CompliancelumSdhpdhBasicCompl1deprecatedBasic implementation requirements for the SDHPDH MIB V1. (15.0)
1.3.6.1.4.1.8708.2.35.1.2.2CompliancelumSdhpdhBasicCompl2currentBasic implementation requirements for the SDHPDH MIB V2. (16.0)
1.3.6.1.4.1.8708.2.35.2NodelumSdhpdhMIBObjects
1.3.6.1.4.1.8708.2.35.2.1NodesdhpdhGeneral
1.3.6.1.4.1.8708.2.35.2.1.1ScalarsdhpdhGeneralLastChangeTimeread-onlycurrentThe time when the configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.35.2.1.2ScalarsdhpdhGeneralStateLastChangeTimeread-onlycurrentThe time when the state of the MIB was last changed.
1.3.6.1.4.1.8708.2.35.2.1.3ScalarsdhpdhGeneralE1t1TableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.35.2.1.4ScalarsdhpdhGeneralEquipmentTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.35.2.2NodesdhpdhE1t1List
1.3.6.1.4.1.8708.2.35.2.2.1TablesdhpdhE1t1Tablenot-accessiblecurrentThe SDHPDH table.
1.3.6.1.4.1.8708.2.35.2.2.1.1RowsdhpdhE1t1Entrynot-accessiblecurrentAn entry in the SDHPDH table.
1.3.6.1.4.1.8708.2.35.2.2.1.1.1ColumnsdhpdhE1t1Indexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.35.2.2.1.1.2ColumnsdhpdhE1t1Nameread-onlycurrentThe name of the object, for example 'e1t1:1:2:1-2:1', where the numbers indicate the subrack, slot, port numbers and e1t1 index.
1.3.6.1.4.1.8708.2.35.2.2.1.1.6ColumnsdhpdhE1t1Descrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.35.2.2.1.1.7ColumnsdhpdhE1t1AdminStatusread-writecurrentThe administrative state for the interface. down - The interface should be inactive. service - The object is activated but alarms are suppressed. Intended for …
1.3.6.1.4.1.8708.2.35.2.2.1.1.8ColumnsdhpdhE1t1OperStatusread-onlycurrentThe operational state for the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preventing it fr…
1.3.6.1.4.1.8708.2.35.2.2.1.1.9ColumnsdhpdhE1t1AlarmIndicationSignalW2Cread-onlycurrentAlarm indication signal. A: An 'all ones' signal is detected. D: Signal recovered.
1.3.6.1.4.1.8708.2.35.2.2.1.1.10ColumnsdhpdhE1t1AlarmIndicationSignalC2Wread-onlycurrentAlarm indication signal. A: An 'all ones' signal is detected. D: Signal recovered.
1.3.6.1.4.1.8708.2.35.2.2.1.1.11ColumnsdhpdhE1t1LossOfFrameC2Wread-onlycurrentLoss of frame. All forms of sync loss.
1.3.6.1.4.1.8708.2.35.2.2.1.1.12ColumnsdhpdhE1t1LossOfFrameW2Cread-onlycurrentLoss of frame. All forms of sync loss.
1.3.6.1.4.1.8708.2.35.2.2.1.1.13ColumnsdhpdhE1t1UnEquippedread-onlycurrentShows whether the E1T1 has payload or not. A: No payload. D: Has payload
1.3.6.1.4.1.8708.2.35.2.2.1.1.14ColumnsdhpdhE1t1ConnectionStatusread-onlycurrentShows the name of the wdm port and possible subchannel that it is connected to or Unconnected if not connected.
1.3.6.1.4.1.8708.2.35.2.2.1.1.15ColumnsdhpdhE1t1SubChannelIdread-onlycurrentChannel number. For E1: according to MLK (ITU-T G.707 Figure 7-27) For T1: TBD.
1.3.6.1.4.1.8708.2.35.2.2.1.1.16ColumnsdhpdhE1t1MultiplexingInformationread-onlycurrentChannels are numbered 1.1.1, 2.1.1, 3.1.1, 1.2.1, .... The digits are called K, L and M: K.L.M SDH/E1 ====== Refer to G.707 7.3 K = TUG3 number L = TUG2 number…
1.3.6.1.4.1.8708.2.35.2.2.1.1.17ColumnsdhpdhE1t1RxSignalStatusread-onlycurrentThe operational state for incoming (RX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal qual…
1.3.6.1.4.1.8708.2.35.2.2.1.1.18ColumnsdhpdhE1t1TxSignalStatusread-onlycurrentThe operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal qual…
1.3.6.1.4.1.8708.2.35.2.2.1.1.19ColumnsdhpdhE1t1VcIndexread-onlycurrentShows what index corresponding VC3/VC4 has in clientVc4 table.
1.3.6.1.4.1.8708.2.35.2.2.1.1.20ColumnsdhpdhE1t1ClockDomainread-onlycurrentShows the origin of the clock received from the hub.
1.3.6.1.4.1.8708.2.35.2.2.1.1.21ColumnsdhpdhE1t1TuAlarmIndicationSignalC2Wread-onlycurrentAlarm indication signal. A: An 'all ones' signal is detected. D: Signal recovered.
1.3.6.1.4.1.8708.2.35.2.2.1.1.22ColumnsdhpdhE1t1TuLossOfPointerC2Wread-onlycurrentLoss of pointer. All forms of sync loss.
1.3.6.1.4.1.8708.2.35.2.2.1.1.23ColumnsdhpdhE1t1FrameFormatread-writecurrentSelect the frame format for T1 signals esf - Extended Super Frame (ESF) is a T1 framing standard, sometimes called D5 framing. It is preferred to its predecess…
1.3.6.1.4.1.8708.2.35.2.2.1.1.24ColumnsdhpdhE1t1EquipmentIndexread-onlycurrentShows what index corresponding equipment has in equipment table.
1.3.6.1.4.1.8708.2.35.2.2.1.1.25ColumnsdhpdhE1t1SignalLabelread-onlycurrentShows synchronous status of the incoming signal.
1.3.6.1.4.1.8708.2.35.2.3NodesdhpdhEquipmentList
1.3.6.1.4.1.8708.2.35.2.3.1TablesdhpdhEquipmentTablenot-accessiblecurrentThe SDHPDH table.
1.3.6.1.4.1.8708.2.35.2.3.1.1RowsdhpdhEquipmentEntrynot-accessiblecurrentAn entry in the SDHPDH table.
1.3.6.1.4.1.8708.2.35.2.3.1.1.1ColumnsdhpdhEquipmentIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.35.2.3.1.1.2ColumnsdhpdhEquipmentNameread-onlycurrentThe management name of the interface, for example 'sdhpdheq:1:2:1' (sdhpdheq:[subrack]:[slot]).
1.3.6.1.4.1.8708.2.35.2.3.1.1.3ColumnsdhpdhEquipmentMultiplexingStructureread-createcurrentChoose if vc3 or vc4 is used
1.3.6.1.4.1.8708.2.35.2.3.1.1.4ColumnsdhpdhEquipmentChangeMultiplexStructureCommandread-onlycurrentCommand to change the multiplexing structure