LUM-SOAM-PM-MIB
180 objects
This MIB module contains the management objects for the management of Ethernet Services Operations, Administration and Maintenance for Performance Monitoring (SOAM-PM).
Imported Objects
| IEEE8021-CFM-MIB | -- RFC 2580 Dot1agCfmMepIdOrZero |
| IEEE8021-TC-MIB | IEEE8021PriorityValue |
| LUM-REG | lumModules lumSoamPmMIB |
| LUM-TC | BoardOrInterfaceAdminStatus BoardOrInterfaceOperStatus CommandString FaultStatus MgmtNameString SlotNumber SubrackNumber Unsigned32WithNA |
| MEF-SOAM-TC-MIB | 1ap MefSoamTcSessionType MefSoamTcStatusType |
| SNMPv2-CONF | -- RFC 2579 OBJECT-GROUP MODULE-COMPLIANCE |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC 2578 TruthValue DateAndTime DisplayString MacAddress RowStatus TimeInterval |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.60 | IdentitylumSoamPmMIBModule | This MIB module contains the management objects for the management of Ethernet Services Operations, Administration and Maintenance for Performance Monitoring (… | ||
| 1.3.6.1.4.1.8708.2.60.1 | NodelumSoamPmConfs | |||
| 1.3.6.1.4.1.8708.2.60.1.1 | NodelumSoamPmGroups | |||
| 1.3.6.1.4.1.8708.2.60.1.1.1 | GroupsoamPmGeneralGroupV1 | current | General objects for the MEF service OAM group (R22.0). | |
| 1.3.6.1.4.1.8708.2.60.1.1.2 | GroupsoamPmLmCfgGroupV1 | current | Objects for the MEF Service OAM LM Configuration group (R22.0). | |
| 1.3.6.1.4.1.8708.2.60.1.1.3 | GroupsoamPmLmStatsGroupV1 | current | Objects for the MEF Service OAM LM current statistics group (R22.0). | |
| 1.3.6.1.4.1.8708.2.60.1.1.4 | GroupsoamPmDmCfgGroupV1 | current | Objects for the Service OAM DM configuration group (R22.0). | |
| 1.3.6.1.4.1.8708.2.60.1.1.5 | GroupsoamPmDmStatsGroupV1 | current | Objects for the Service OAM DM current statistics group (R22.0). | |
| 1.3.6.1.4.1.8708.2.60.1.1.6 | GroupsoamPmLmCfgGroupV2 | current | Objects for the MEF Service OAM LM Configuration group (R23.0). | |
| 1.3.6.1.4.1.8708.2.60.1.1.7 | GroupsoamPmDmCfgGroupV2 | current | Objects for the Service OAM DM configuration group (R23.0). | |
| 1.3.6.1.4.1.8708.2.60.1.1.8 | GroupsoamPmLmStatsGroupV2 | current | Objects for the MEF Service OAM LM current statistics group (R23.0). | |
| 1.3.6.1.4.1.8708.2.60.1.1.9 | GroupsoamPmDmStatsGroupV2 | current | Objects for the Service OAM DM current statistics group (R23.0). | |
| 1.3.6.1.4.1.8708.2.60.1.1.10 | GroupsoamPmLmCfgGroupV3 | current | Objects for the MEF Service OAM LM Configuration group (R25.0). | |
| 1.3.6.1.4.1.8708.2.60.1.1.11 | GroupsoamPmDmCfgGroupV3 | current | Objects for the Service OAM DM configuration group (R25.0). | |
| 1.3.6.1.4.1.8708.2.60.1.2 | NodelumSoamPmCompliances | |||
| 1.3.6.1.4.1.8708.2.60.1.2.1 | CompliancesoamPmBasicComplV1 | current | The compliance statement for the MEF Service OAM PM MIB. (R22.0) | |
| 1.3.6.1.4.1.8708.2.60.1.2.2 | CompliancesoamPmBasicComplV2 | current | The compliance statement for the MEF Service OAM PM MIB. (R23.0) | |
| 1.3.6.1.4.1.8708.2.60.1.2.3 | CompliancesoamPmBasicComplV3 | current | The compliance statement for the MEF Service OAM PM MIB. (R25.0) | |
| 1.3.6.1.4.1.8708.2.60.2 | NodelumSoamPmMIBObjects | |||
| 1.3.6.1.4.1.8708.2.60.2.1 | NodesoamPmGeneral | |||
| 1.3.6.1.4.1.8708.2.60.2.1.1 | ScalarsoamPmGeneralLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.60.2.1.2 | ScalarsoamPmGeneralLmStateLastChangeTime | read-only | current | The time when the state of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.60.2.1.3 | ScalarsoamPmGeneralLmObjectsTableSize | read-only | current | Size of ethernet service OAM LM objects table |
| 1.3.6.1.4.1.8708.2.60.2.1.4 | ScalarsoamPmGeneralDmObjectsTableSize | read-only | current | Size of ethernet service OAM DM objects table |
| 1.3.6.1.4.1.8708.2.60.2.2 | NodesoamPmLmObjects | |||
| 1.3.6.1.4.1.8708.2.60.2.2.1 | TablesoamPmLmCfgTable | not-accessible | current | This table includes configuration objects and operations for the Frame Loss Measurement function defined in [Y.1731] and [MEF SOAM-PM]. Each row in the table r… |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1 | RowsoamPmLmCfgEntry | not-accessible | current | The conceptual row of soamPmLmCfgTable. |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.1 | ColumnsoamPmLmCfgIndex | read-only | current | An index to the Loss Measurement Configuration table which indicates the specific measurement session for the MEP. The index is not persistent and may be reuse… |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.2 | ColumnsoamPmLmCfgName | read-only | current | The name of the LM session. The name has the same structure as the name of the remote mep. LM:megname:slot:subrack:mepid:<priority> The priority is not used fo… |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.3 | ColumnsoamPmLmCfgDescr | read-write | current | User configurable label for the LM session. |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.4 | ColumnsoamPmLmCfgSubrack | read-create | current | The number of the subrack where this OAM object is defined |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.5 | ColumnsoamPmLmCfgSlot | read-create | current | The slot where this OAM Object is defined. |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.6 | ColumnsoamPmLmCfgEnabled | read-create | current | This object specifies whether the Loss Measurement session is enabled. This Attribute is only used for NID, Admin status and oper status are used in EMXP. |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.7 | ColumnsoamPmLmCfgMessagePeriod | read-create | current | This object specifies the interval between Loss Measurement OAM message transmission. For Loss Measurement monitoring applications the default value is 1 sec. … |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.8 | ColumnsoamPmLmCfgDestMacAddress | read-create | current | The Target or Destination MAC Address Field to be transmitted. This address will be used if the value of the object soamPmLmDestIsMepId is 'false'. This object… |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.9 | ColumnsoamPmLmCfgMepName | read-only | current | The identifier of the MEP this LM session belongs to. Persistent cross-reference to MEP table. |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.10 | ColumnsoamPmLmCfgMaidIdentifier | read-create | current | A unique user definied identifier for the MEG. |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.11 | ColumnsoamPmLmCfgDestMepId | read-create | current | The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM LM frame is to be sent. This address will… |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.12 | ColumnsoamPmLmCfgDestIsMepId | read-create | current | A value of 'true' indicates that MEPID of the target MEP is used for SOAM LM frame transmission. A value of 'false' indicates that the MAC address of the targe… |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.13 | ColumnsoamPmLmCfgInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.14 | ColumnsoamPmLmCfgLocalDeviceType | read-create | current | The type of device the LM is created and associated. |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.15 | ColumnsoamPmLmCfgType | read-create | current | This object specifies what type of Loss Measurement will be performed. lmLmm(1) LMM SOAM PDU generated and received LMR responses tracked lmSlm(2) SLM SOAM PDU… |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.16 | ColumnsoamPmLmCfgPriority | read-create | current | This object specifies the Loss Measurement OAM message priority as well as the priority of the service/OAM traffic to be monitored. If the session attibute soa… |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.17 | ColumnsoamPmLmCfgAvailabilityFlrThreshold | read-create | current | This object specifies a configurable availability threshold to be used in evaluating the availability/unavailability status of an availability indicator per ME… |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.18 | ColumnsoamPmLmCfgAvailabilityUasAlarmThreshold | read-create | current | This object specifies the configurable number of seconds the session shall be determined to be unavailable before raising an alarm. |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.19 | ColumnsoamPmLmCfgSessionType | read-create | current | This object indicates whether the current session is defined to be 'Proactive' or 'On-Demand'. A value of 'proactive' indicates the current session is 'Proacti… |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.20 | ColumnsoamPmLmCfgSessionStatus | read-only | current | This object indicates the current status of the LM session. A value of 'active' indicates the current LM session is active, i.e. the current time lies between … |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.21 | ColumnsoamPmLmCfgCosAwareness | read-create | current | Define CoS awareness for the LM initiator. A CoS aware LM Initiater will send counters associated with the priority of the sent LMM packets. priorityBlind - LM… |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.22 | ColumnsoamPmLmCfgRowStatus | read-create | current | Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the… |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.23 | ColumnsoamPmLmCfgAdminStatus | read-write | current | The administrative state for an LM Session. down - The LM session should be inactive. service - The LM session is activated but alarms are suppressed. Intended… |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.24 | ColumnsoamPmLmCfgOperStatus | read-only | current | The operational state for the object. notPresent - The object is not available. down - The object is de-activated or there are faults preventing its transition… |
| 1.3.6.1.4.1.8708.2.60.2.2.1.1.25 | ColumnsoamPmLmCfgStats | read-only | current | View current statistics for the LM session. |
| 1.3.6.1.4.1.8708.2.60.2.2.2 | TablesoamPmLmStatsTable | not-accessible | current | This table contains the results for the current Measurement Interval in a SOAM Loss Measurement session gathered during the interval indicated by soamPmLmCfgMe… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1 | RowsoamPmLmStatsEntry | not-accessible | current | The conceptual row of soamPmLmStatsTable |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.1 | ColumnsoamPmLmStatsIndex | read-only | current | The index for the current Measurement Interval for this PM session. The index is the same as for the configuration, i.e soamPmLmCfgIndex and is not persistent … |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.2 | ColumnsoamPmLmStatsLocalDeviceType | read-only | current | The type of device the LM is created and associated. |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.3 | ColumnsoamPmLmStatsName | read-only | current | The name of the LM session, same as the name of remote MEP that this LM session is associated with. |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.4 | ColumnsoamPmLmStatsSubrack | read-only | current | The number of the subrack where this OAM object is defined |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.5 | ColumnsoamPmLmStatsSlot | read-only | current | The slot where this OAM Object is defined. |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.6 | ColumnsoamPmLmStatsMaidIdentifier | read-only | current | A unique user definied identifier for the MEG. |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.7 | ColumnsoamPmLmStatsDestMepId | read-only | current | The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM LM frame is to be sent. This address will… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.8 | ColumnsoamPmLmStatsInternalReference | read-only | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.9 | ColumnsoamPmLmStatsMepName | read-only | current | The identifier of the MEP this LM session belongs to. Persistent cross-reference to MEP table. |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.10 | ColumnsoamPmLmStatsSuspect15Min | read-only | current | Whether the Measurement Interval has been marked as suspect. The object is set to false at the start of a measurement interval. It is set to true when there is… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.11 | ColumnsoamPmLmStatsSuspectPrevious15Min | read-only | current | Whether the Measurement Interval has been marked as suspect. The object is set to false at the start of a measurement interval. It is set to true when there is… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.12 | ColumnsoamPmLmStatsSuspect24H | read-only | current | Whether the Measurement Interval has been marked as suspect. The object is set to false at the start of a measurement interval. It is set to true when there is… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.13 | ColumnsoamPmLmStatsReset15Min | read-write | current | Reset the 15 minute counters for the LM session. After a successful reset the default value (normal) is restored in this action attribute. |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.14 | ColumnsoamPmLmStatsReset24H | read-write | current | Reset the 24 hour counters for the LM session. After a successful reset the default value (normal) is restored in this action attribute. |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.15 | ColumnsoamPmLmStatsStartTime15Min | read-only | current | The time that the current Measurement Interval started. |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.16 | ColumnsoamPmLmStatsElapsedTime15Min | read-only | current | The time that the current Measurement Interval has been running, in seconds. |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.17 | ColumnsoamPmLmStatsForwardTransmittedFrames15Min | read-only | current | This object contains the number of frames transmitted in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Se… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.18 | ColumnsoamPmLmStatsForwardReceivedFrames15Min | read-only | current | This object contains the number of frames received in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Servi… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.19 | ColumnsoamPmLmStatsForwardMinFlr15Min | read-only | current | This object contains the minimum one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.20 | ColumnsoamPmLmStatsForwardMaxFlr15Min | read-only | current | This object contains the maximum one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.21 | ColumnsoamPmLmStatsForwardAvgFlr15Min | read-only | current | This object contains the average one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.22 | ColumnsoamPmLmStatsForwardHighLoss15Min | read-only | current | This object is the number of high loss intervals (HLI) over time in the forward direction. The value starts at 0 and increments for every HLI that occurs. This… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.23 | ColumnsoamPmLmStatsBackwardTransmittedFrames15Min | read-only | current | This object contains the number of frames transmitted in the backward direction by this MEP. For a PM Session of type lmLmm and lmCcm this includes Ethernet Se… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.24 | ColumnsoamPmLmStatsBackwardReceivedFrames15Min | read-only | current | This object contains the number of frames received in the backward direction by this MEP. For a PM Session of type lmLmm this includes Ethernet Service Frames … |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.25 | ColumnsoamPmLmStatsBackwardMinFlr15Min | read-only | current | This object contains the minimum one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value i… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.26 | ColumnsoamPmLmStatsBackwardMaxFlr15Min | read-only | current | This object contains the maximum one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value i… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.27 | ColumnsoamPmLmStatsBackwardAvgFlr15Min | read-only | current | This object contains the average one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value i… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.28 | ColumnsoamPmLmStatsBackwardHighLoss15Min | read-only | current | This object is the number of high loss intervals (HLI) over time in the backwards direction. The value starts at 0 and increments for every HLI that occurs. Th… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.29 | ColumnsoamPmLmStatsUnavailableSeconds15Min | read-only | current | This object contains the number if seconds the service has been been unavailable during the 15 min interval. The service has been unavailable when the FLR thre… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.30 | ColumnsoamPmLmStatsStartTimePrevious15Min | read-only | current | The time that the current Measurement Interval started. |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.31 | ColumnsoamPmLmStatsElapsedTimePrevious15Min | read-only | current | The time that the current Measurement Interval has been running, in seconds. |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.32 | ColumnsoamPmLmStatsForwardTransmittedFramesPrevious15Min | read-only | current | This object contains the number of frames transmitted in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Se… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.33 | ColumnsoamPmLmStatsForwardReceivedFramesPrevious15Min | read-only | current | This object contains the number of frames received in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Servi… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.34 | ColumnsoamPmLmStatsForwardMinFlrPrevious15Min | read-only | current | This object contains the minimum one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.35 | ColumnsoamPmLmStatsForwardMaxFlrPrevious15Min | read-only | current | This object contains the maximum one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.36 | ColumnsoamPmLmStatsForwardAvgFlrPrevious15Min | read-only | current | This object contains the average one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.37 | ColumnsoamPmLmStatsForwardHighLossPrevious15Min | read-only | current | This object is the number of high loss intervals (HLI) over time in the forward direction. The value starts at 0 and increments for every HLI that occurs. This… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.38 | ColumnsoamPmLmStatsBackwardTransmittedFramesPrevious15Min | read-only | current | This object contains the number of frames transmitted in the backward direction by this MEP. For a PM Session of type lmLmm and lmCcm this includes Ethernet Se… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.39 | ColumnsoamPmLmStatsBackwardReceivedFramesPrevious15Min | read-only | current | This object contains the number of frames received in the backward direction by this MEP. For a PM Session of type lmLmm this includes Ethernet Service Frames … |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.40 | ColumnsoamPmLmStatsBackwardMinFlrPrevious15Min | read-only | current | This object contains the minimum one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value i… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.41 | ColumnsoamPmLmStatsBackwardMaxFlrPrevious15Min | read-only | current | This object contains the maximum one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value i… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.42 | ColumnsoamPmLmStatsBackwardAvgFlrPrevious15Min | read-only | current | This object contains the average one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value i… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.43 | ColumnsoamPmLmStatsBackwardHighLossPrevious15Min | read-only | current | This object is the number of high loss intervals (HLI) over time in the backwards direction. The value starts at 0 and increments for every HLI that occurs. Th… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.44 | ColumnsoamPmLmStatsStartTime24H | read-only | current | The time that the current Measurement Interval started. |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.45 | ColumnsoamPmLmStatsElapsedTime24H | read-only | current | The time that the current Measurement Interval has been running, in seconds. |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.46 | ColumnsoamPmLmStatsForwardTransmittedFrames24H | read-only | current | This object contains the number of frames transmitted in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Se… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.47 | ColumnsoamPmLmStatsForwardReceivedFrames24H | read-only | current | This object contains the number of frames received in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Servi… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.48 | ColumnsoamPmLmStatsForwardMinFlr24H | read-only | current | This object contains the minimum one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.49 | ColumnsoamPmLmStatsForwardMaxFlr24H | read-only | current | This object contains the maximum one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.50 | ColumnsoamPmLmStatsForwardAvgFlr24H | read-only | current | This object contains the average one-way frame loss ratio (FLR) in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.51 | ColumnsoamPmLmStatsForwardHighLoss24H | read-only | current | This object is the number of high loss intervals (HLI) over time in the forward direction. The value starts at 0 and increments for every HLI that occurs. This… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.52 | ColumnsoamPmLmStatsBackwardTransmittedFrames24H | read-only | current | This object contains the number of frames transmitted in the backward direction by this MEP. For a PM Session of type lmLmm and lmCcm this includes Ethernet Se… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.53 | ColumnsoamPmLmStatsBackwardReceivedFrames24H | read-only | current | This object contains the number of frames received in the backward direction by this MEP. For a PM Session of type lmLmm this includes Ethernet Service Frames … |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.54 | ColumnsoamPmLmStatsBackwardMinFlr24H | read-only | current | This object contains the minimum one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value i… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.55 | ColumnsoamPmLmStatsBackwardMaxFlr24H | read-only | current | This object contains the maximum one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value i… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.56 | ColumnsoamPmLmStatsBackwardAvgFlr24H | read-only | current | This object contains the average one-way frame loss ratio (FLR) in the backward direction calculated by this MEP for this Measurement Interval. The FLR value i… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.57 | ColumnsoamPmLmStatsBackwardHighLoss24H | read-only | current | This object is the number of high loss intervals (HLI) over time in the backwards direction. The value starts at 0 and increments for every HLI that occurs. Th… |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.58 | ColumnsoamPmLmStatsUas | read-only | current | Unavailable seconds (UAS) 15 min threshold exceeded. A: The number of unavailable seconds during a period exceeds the associated threshold. D: At the start of … |
| 1.3.6.1.4.1.8708.2.60.2.2.2.1.59 | ColumnsoamPmLmStatsPriority | read-only | current | This object specifies the Loss Measurement OAM message priority as well as the priority of the service/OAM traffic to be monitored. Only frames of the same Cla… |
| 1.3.6.1.4.1.8708.2.60.2.3 | NodesoamPmDmObjects | |||
| 1.3.6.1.4.1.8708.2.60.2.3.1 | TablesoamPmDmCfgTable | not-accessible | current | This table includes configuration objects and operations for the Delay Measurement function. Each row in the table represents a Delay Measurement session for t… |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1 | RowsoamPmDmCfgEntry | not-accessible | current | The conceptual row of soamPmDmCfgTable. |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.1 | ColumnsoamPmDmCfgIndex | read-only | current | An index to the Delay Measurement Configuration table which indicates the specific measurement session for the MEP. The index is not persistent and may be reus… |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.2 | ColumnsoamPmDmCfgName | read-only | current | The name of the DM session. The name has the same structure as the name of the remote mep. DM:megname:slot:subrack:mepid:<priority> The priority is not used fo… |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.3 | ColumnsoamPmDmCfgDescr | read-write | current | User configurable label for the DM session. |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.4 | ColumnsoamPmDmCfgSubrack | read-create | current | The number of the subrack where this OAM object is defined |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.5 | ColumnsoamPmDmCfgSlot | read-create | current | The slot where this OAM Object is defined. |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.6 | ColumnsoamPmDmCfgInternalReference | read-create | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.7 | ColumnsoamPmDmCfgLocalDeviceType | read-create | current | The type of device the DM is created and associated. |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.8 | ColumnsoamPmDmCfgDropEligible | read-create | current | This object specifies the drop eligibility of a specific OAM frame. Frames with ETH-DM information are always marked as drop ineligible. |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.9 | ColumnsoamPmDmCfgType | read-create | current | This object indicates what type of Delay Measurement is to be performed. dmDmm(1) DMM SOAM PDU generated, DMR responses received (one-way or two-way measuremen… |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.10 | ColumnsoamPmDmCfgEnabled | read-create | current | This object specifies whether the Delay Measurement session is enabled. This Attribute is only used for NID, Admin status and oper status are used in EMXP. |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.11 | ColumnsoamPmDmCfgMessagePeriod | read-create | current | This object specifies the interval between Delay Measurement OAM message transmission. For Delay Measurement monitoring applications, the default value is 100m… |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.12 | ColumnsoamPmDmCfgPriority | read-create | current | This object specifies the priority of frames with Delay Measurement OAM message information. This object can only be written at creation time and cannot be mod… |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.13 | ColumnsoamPmDmCfgDestMacAddress | read-create | current | The Target or Destination MAC Address Field to be transmitted. This object can only be written at creation time and cannot be modified once it has been created. |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.14 | ColumnsoamPmDmCfgMepName | read-only | current | The identifier of the MEP this DM session belongs to. Persistent cross-reference to MEP table. |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.15 | ColumnsoamPmDmCfgMaidIdentifier | read-create | current | A unique user definied identifier for the MEG. |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.16 | ColumnsoamPmDmCfgDestMepId | read-create | current | The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM DM frame is to be sent. This address will… |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.17 | ColumnsoamPmDmCfgDestIsMepId | read-create | current | A value of 'true' indicates that MEPID of the target MEP is used for SOAM DM frame transmission. A value of 'false' indicates that the destination MAC address … |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.18 | ColumnsoamPmDmCfgSessionType | read-create | current | This object indicates whether the current session is defined to be 'Proactive' or 'On-Demand'. A value of 'proactive' indicates the current session is 'Proacti… |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.19 | ColumnsoamPmDmCfgSessionStatus | read-only | current | This object indicates the current status of the DM session. A value of 'active' indicates the current DM session is active. A value of 'notActive' indicates th… |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.20 | ColumnsoamPmDmCfgRowStatus | read-create | current | Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the… |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.21 | ColumnsoamPmDmCfgAdminStatus | read-write | current | The administrative state for a DM Session. down - The DM session should be inactive. service - The DM session is activated but alarms are suppressed. Intended … |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.22 | ColumnsoamPmDmCfgOperStatus | read-only | current | The operational state for the object. notPresent - The object is not available. down - The object is de-activated or there are faults preventing its transition… |
| 1.3.6.1.4.1.8708.2.60.2.3.1.1.23 | ColumnsoamPmDmCfgStats | read-only | current | View current statistics for the DM session. |
| 1.3.6.1.4.1.8708.2.60.2.3.2 | TablesoamPmDmStatsTable | not-accessible | current | This table contains the results for the current Measurement Interval in a SOAM Delay Measurement session gathered during the interval indicated by soamPmLmCfgM… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1 | RowsoamPmDmStatsEntry | not-accessible | current | The conceptual row of soamPmDmStatsTable |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.1 | ColumnsoamPmDmStatsIndex | read-only | current | The index for the current Measurement Interval for this PM session. The index is the same as for the configuration, i.e soamPmDmCfgIndex and is not persistent … |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.2 | ColumnsoamPmDmStatsLocalDeviceType | read-only | current | The type of device the DM is created and associated. |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.3 | ColumnsoamPmDmStatsName | read-only | current | The name of the DM session, same as the name of remote MEP that this DM session is associated with. |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.4 | ColumnsoamPmDmStatsSubrack | read-only | current | The number of the subrack where this OAM object is defined |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.5 | ColumnsoamPmDmStatsSlot | read-only | current | The slot where this OAM Object is defined. |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.6 | ColumnsoamPmDmStatsMaidIdentifier | read-only | current | A unique user definied identifier for the MEG. |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.7 | ColumnsoamPmDmStatsDestMepId | read-only | current | The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM LM frame is to be sent. This address will… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.8 | ColumnsoamPmDmStatsInternalReference | read-only | current | For internal use only. |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.9 | ColumnsoamPmDmStatsMepName | read-only | current | The identifier of the MEP this DM session belongs to. Persistent cross-reference to MEP table. |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.10 | ColumnsoamPmDmStatsSuspect15Min | read-only | current | Whether the Measurement Interval has been marked as suspect. The object is to be set to false at the start of a measurement interval. It is set to true when th… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.11 | ColumnsoamPmDmStatsSuspectPrevious15Min | read-only | current | Whether the Measurement Interval has been marked as suspect. The object is to be set to false at the start of a measurement interval. It is set to true when th… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.12 | ColumnsoamPmDmStatsSuspect24H | read-only | current | Whether the Measurement Interval has been marked as suspect. The object is to be set to false at the start of a measurement interval. It is set to true when th… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.13 | ColumnsoamPmDmStatsReset15Min | read-write | current | Reset the 15 minute counters for the DM session. After a successful reset the default value (normal) is restored in this action attribute. |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.14 | ColumnsoamPmDmStatsReset24H | read-write | current | Reset the 24 hour counters for the DM session. After a successful reset the default value (normal) is restored in this action attribute. |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.15 | ColumnsoamPmDmStatsStartTime15Min | read-only | current | The time that the current Measurement Interval started. |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.16 | ColumnsoamPmDmStatsElapsedTime15Min | read-only | current | The time that the current Measurement Interval has been running, in seconds. |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.17 | ColumnsoamPmDmStatsFrameDelayTwoWayMin15Min | read-only | current | This object contains the minimum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1Dm… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.18 | ColumnsoamPmDmStatsFrameDelayTwoWayMax15Min | read-only | current | This object contains the maximum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1Dm… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.19 | ColumnsoamPmDmStatsFrameDelayTwoWayAvg15Min | read-only | current | This object contains the average two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1Dm… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.20 | ColumnsoamPmDmStatsIfdvTwoWayMin15Min | read-only | current | This object contains the minimum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.21 | ColumnsoamPmDmStatsIfdvTwoWayMax15Min | read-only | current | This object contains the maximum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.22 | ColumnsoamPmDmStatsIfdvTwoWayAvg15Min | read-only | current | This object contains the average two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.23 | ColumnsoamPmDmStatsStartTimePrevious15Min | read-only | current | The time that the current Measurement Interval started. |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.24 | ColumnsoamPmDmStatsElapsedTimePrevious15Min | read-only | current | The time that the current Measurement Interval has been running, in seconds. |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.25 | ColumnsoamPmDmStatsFrameDelayTwoWayMinPrevious15Min | read-only | current | This object contains the minimum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1Dm… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.26 | ColumnsoamPmDmStatsFrameDelayTwoWayMaxPrevious15Min | read-only | current | This object contains the maximum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1Dm… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.27 | ColumnsoamPmDmStatsFrameDelayTwoWayAvgPrevious15Min | read-only | current | This object contains the average two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1Dm… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.28 | ColumnsoamPmDmStatsIfdvTwoWayMinPrevious15Min | read-only | current | This object contains the minimum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.29 | ColumnsoamPmDmStatsIfdvTwoWayMaxPrevious15Min | read-only | current | This object contains the maximum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.30 | ColumnsoamPmDmStatsIfdvTwoWayAvgPrevious15Min | read-only | current | This object contains the average two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.31 | ColumnsoamPmDmStatsStartTime24H | read-only | current | The time that the current Measurement Interval started. |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.32 | ColumnsoamPmDmStatsElapsedTime24H | read-only | current | The time that the current Measurement Interval has been running, in seconds. |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.33 | ColumnsoamPmDmStatsFrameDelayTwoWayMin24H | read-only | current | This object contains the minimum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1Dm… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.34 | ColumnsoamPmDmStatsFrameDelayTwoWayMax24H | read-only | current | This object contains the maximum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1Dm… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.35 | ColumnsoamPmDmStatsFrameDelayTwoWayAvg24H | read-only | current | This object contains the average two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is soamPmDmCfgType is dm1Dm… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.36 | ColumnsoamPmDmStatsIfdvTwoWayMin24H | read-only | current | This object contains the minimum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.37 | ColumnsoamPmDmStatsIfdvTwoWayMax24H | read-only | current | This object contains the maximum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.38 | ColumnsoamPmDmStatsIfdvTwoWayAvg24H | read-only | current | This object contains the average two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined… |
| 1.3.6.1.4.1.8708.2.60.2.3.2.1.39 | ColumnsoamPmDmStatsPriority | read-only | current | This object specifies the priority of frames with Delay Measurement OAM message information. The default value is to be the value which yields the lowest frame… |