MIB Viewer

LUM-SOFTWARE-MIB

108 objects
The software MIB. Provides configuration, status and commands for SW upgrade and other maintenance operations. The tables and groups contained in this MIB are: (1) The General group contains some general attributes such as timestamps and table sizes. (2) The Software versions table contains a list of software versions installed on the node. (3) The Command group allows an SNMP client to perform SW upgrade and other maintenance actions. (4) The Software Log table contains SNMP-readable log entries for an ongoing upgrade operation (5) The Notifications group contains trap definitions for software status notifications. (6) The Spare Part contains configuration and status used during spare part process. (7) The Expected Software table contains a listing of expected software during an ongoing upgrade operation. (8) The CU Replacement group contains configuration, status and alarms related to the CU replacement process.
Imported Objects
LUM-REGlumModules lumSoftwareMIB
LUM-TCBoardOrInterfaceAdminStatus CommandString FaultStatus
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIIpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString TestAndIncr
OIDNameAccessStatusDescription
1.3.6.1.4.1.8708.1.1.28IdentitylumSoftwareMIBModuleThe software MIB. Provides configuration, status and commands for SW upgrade and other maintenance operations. The tables and groups contained in this MIB are:…
1.3.6.1.4.1.8708.2.28.1NodelumSoftwareConfs
1.3.6.1.4.1.8708.2.28.1.1NodelumSoftwareGroups
1.3.6.1.4.1.8708.2.28.1.1.1GroupsoftwareGeneralGroupdeprecatedThe software general objects.
1.3.6.1.4.1.8708.2.28.1.1.2GroupsoftwareVersionGroupcurrentThe software version objects.
1.3.6.1.4.1.8708.2.28.1.1.3GroupsoftwareCommandGroupdeprecatedThe software command objects.
1.3.6.1.4.1.8708.2.28.1.1.4GroupsoftwareLogGroupcurrentThe software log objects.
1.3.6.1.4.1.8708.2.28.1.1.5GroupsoftwareCommandGroupV2deprecatedThe software command objects (3.1).
1.3.6.1.4.1.8708.2.28.1.1.6GroupsoftwareSpareGroupcurrentThe spare part objects.
1.3.6.1.4.1.8708.2.28.1.1.7GroupsoftwareGeneralGroupV2deprecatedThe software general objects.
1.3.6.1.4.1.8708.2.28.1.1.8GroupsoftwareGeneralGroupV3currentThe software general objects. (5.0)
1.3.6.1.4.1.8708.2.28.1.1.9GroupsoftwareCommandGroupV3deprecatedThe software command objects (5.0).
1.3.6.1.4.1.8708.2.28.1.1.10GroupsoftwareExpectedSwGroupdeprecatedThe expected software objects (5.0).
1.3.6.1.4.1.8708.2.28.1.1.11GroupsoftwareExpectedSwGroupV2currentThe expected software objects (11.0).
1.3.6.1.4.1.8708.2.28.1.1.12GroupsoftwareCuRepGroupdeprecatedThe cu replacement software objects (13.0).
1.3.6.1.4.1.8708.2.28.1.1.13GroupsoftwareCuRepGroupV2currentThe cu replacement software objects (18.0).
1.3.6.1.4.1.8708.2.28.1.1.14GroupsoftwareCommandGroupV4currentThe software command objects (30.0).
1.3.6.1.4.1.8708.2.28.1.2NodelumSoftwareCompl
1.3.6.1.4.1.8708.2.28.1.2.1CompliancelumSoftwareBasicComplV1deprecatedBasic implementation requirements for the software MIB v1 (3.0).
1.3.6.1.4.1.8708.2.28.1.2.2CompliancelumSoftwareBasicComplV2deprecatedBasic implementation requirements for the software MIB v2 (3.1).
1.3.6.1.4.1.8708.2.28.1.2.3CompliancelumSoftwareBasicComplV3deprecatedBasic implementation requirements for the software MIB v3 (5.0).
1.3.6.1.4.1.8708.2.28.1.2.4CompliancelumSoftwareBasicComplV4deprecatedBasic implementation requirements for the software MIB v3 (11.0).
1.3.6.1.4.1.8708.2.28.1.2.5CompliancelumSoftwareBasicComplV5deprecatedBasic implementation requirements for the software MIB v3 (13.0).
1.3.6.1.4.1.8708.2.28.1.2.6CompliancelumSoftwareBasicComplV6deprecatedBasic implementation requirements for the software MIB v6 (18.0).
1.3.6.1.4.1.8708.2.28.1.2.7CompliancelumSoftwareBasicComplV7deprecatedBasic implementation requirements for the software MIB v7 (30.0).
1.3.6.1.4.1.8708.2.28.1.2.8CompliancelumSoftwareBasicComplV8currentBasic implementation requirements for the software MIB v8 (30.1).
1.3.6.1.4.1.8708.2.28.2NodelumSoftwareMIBObjects
1.3.6.1.4.1.8708.2.28.2.1NodesoftwareGeneral
1.3.6.1.4.1.8708.2.28.2.1.1ScalarsoftwareGeneralLastChangeTimeread-onlycurrentThe time when the log table was last changed.
1.3.6.1.4.1.8708.2.28.2.1.2ScalarsoftwareGeneralConfigLastChangeTimeread-onlycurrentThe time when the following data was last changed: - command - version - expected
1.3.6.1.4.1.8708.2.28.2.1.3ScalarsoftwareGeneralSoftwareVersionTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.28.2.1.4ScalarsoftwareGeneralSoftwareLogTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.28.2.1.5ScalarsoftwareGeneralSoftwareExpectedSwTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.28.2.2NodesoftwareVersionList
1.3.6.1.4.1.8708.2.28.2.2.1TablesoftwareVersionTablenot-accessiblecurrentThe list of software versions.
1.3.6.1.4.1.8708.2.28.2.2.1.1RowsoftwareVersionEntrynot-accessiblecurrentAn entry in the software version list.
1.3.6.1.4.1.8708.2.28.2.2.1.1.1ColumnsoftwareVersionIndexread-onlycurrentAn arbitrary index assigned to each software version entry.
1.3.6.1.4.1.8708.2.28.2.2.1.1.2ColumnsoftwareVersionNameread-onlycurrentThe name of the version entry.
1.3.6.1.4.1.8708.2.28.2.2.1.1.3ColumnsoftwareVersionSubrackread-onlycurrentThe subrack for this version
1.3.6.1.4.1.8708.2.28.2.2.1.1.4ColumnsoftwareVersionSlotread-onlycurrentThe slot for this version
1.3.6.1.4.1.8708.2.28.2.2.1.1.5ColumnsoftwareVersionCategoryread-onlycurrentThe category for this version
1.3.6.1.4.1.8708.2.28.2.2.1.1.6ColumnsoftwareVersionVersionread-onlycurrentThe version.
1.3.6.1.4.1.8708.2.28.2.2.1.1.7ColumnsoftwareVersionStatusread-onlycurrentThe status of this version A bit mask Bit 0 (lowest) = 1 => isExecuting Bit 1 = 1 => isPrevious Bit 2 = 1 => isCurrent (not used) Bit 3 = 1 => isNext Bit 4 = 1…
1.3.6.1.4.1.8708.2.28.2.3NodesoftwareCommand
1.3.6.1.4.1.8708.2.28.2.3.1ScalarsoftwareCommandServerIpread-writecurrentThe IP address of the host to retrieve the file from.
1.3.6.1.4.1.8708.2.28.2.3.2ScalarsoftwareCommandEnmFileread-writecurrentFull path to the ENM-spec to use.
1.3.6.1.4.1.8708.2.28.2.3.3ScalarsoftwareCommandIncludeFsread-writecurrentShall the file system be included in the operation?
1.3.6.1.4.1.8708.2.28.2.3.4ScalarsoftwareCommandCleanFirstread-writecurrentShall the file system be 'cleaned' before the operation? noClean - do not clean normalClean - equivalent to 'swu clean all all' culessClean - this will also re…
1.3.6.1.4.1.8708.2.28.2.3.5ScalarsoftwareCommandForceread-writecurrentIgnore minor failures.
1.3.6.1.4.1.8708.2.28.2.3.6ScalarsoftwareCommandOperationread-writecurrentThe operation to perform. test - A no operation - test semaphore. Optional use. check - do not install anything, just show what needs to be done. install - ins…
1.3.6.1.4.1.8708.2.28.2.3.7ScalarsoftwareCommandOperationTimeoutread-writecurrentDelay (in seconds) until the operation is started.
1.3.6.1.4.1.8708.2.28.2.3.8ScalarsoftwareCommandTestAndIncrread-writecurrentProtection against simultaneous access from multiple managers. See SNMPv2-TC. Setting this variable implies that a transaction starts. The provided newPasswd w…
1.3.6.1.4.1.8708.2.28.2.3.9ScalarsoftwareCommandSemaphoreread-onlycurrentThe primary state of the SWU-server NOTE that this variable will change state without affecting the lastChange time stamp. Test this variable before starting a…
1.3.6.1.4.1.8708.2.28.2.3.10ScalarsoftwareCommandOperationStateread-onlycurrentState to show the progress of the operation. idle - when no operation is in progress. pending - operation is ordered but will start later cleaning - cleaning a…
1.3.6.1.4.1.8708.2.28.2.3.11ScalarsoftwareCommandProgressMaxread-onlycurrentShow the maximum value of the progressCounter
1.3.6.1.4.1.8708.2.28.2.3.12ScalarsoftwareCommandResultread-onlycurrentThe result of the operation none - no result success - the latest operation was successful. failed - the latest operation failed.
1.3.6.1.4.1.8708.2.28.2.3.13ScalarsoftwareCommandEnmStateread-onlycurrentOnly applicable if result != none. none - no state upToDate - no upgrade needed rebootNeeded - all software is activated, but reboot of some boards are require…
1.3.6.1.4.1.8708.2.28.2.3.14ScalarsoftwareCommandErrorCountread-onlycurrentShows the number of minor erros encountered.
1.3.6.1.4.1.8708.2.28.2.3.15ScalarsoftwareCommandProgressCounterread-onlycurrentShows the progress of the ongoing ENM upgrade.
1.3.6.1.4.1.8708.2.28.2.3.16ScalarsoftwareCommandNewPasswordread-writecurrentThis is a secret, write-only, parameter. This is set in the same multi-set as testAndIncr and will be used as the client password to the transaction. It must b…
1.3.6.1.4.1.8708.2.28.2.3.17ScalarsoftwareCommandPasswordread-writecurrentThis is a secret, write-only, parameter. This parameter will trigger the operation. Use the same value as set in newPasswd.
1.3.6.1.4.1.8708.2.28.2.3.18ScalarsoftwareCommandReleaseAfterOperationread-writecurrentRelease lock after operation.
1.3.6.1.4.1.8708.2.28.2.3.19ScalarsoftwareCommandSendTrapsread-writecurrentSet this to indicate whether you want traps or not.
1.3.6.1.4.1.8708.2.28.2.3.20ScalarsoftwareCommandClientOperationIdread-writecurrentThis value is set by the SNMP client for each operation. The value is sent back in the traps generated by the operation.
1.3.6.1.4.1.8708.2.28.2.3.21ScalarsoftwareCommandTftpTimeoutread-writecurrentThis parameter stipulates the timeout used by TFTP when downloading from the network. Normally, you do not have to use this! If the circumstances are extreme, …
1.3.6.1.4.1.8708.2.28.2.3.22ScalarsoftwareCommandLocalFtpDirectoryread-onlycurrentFull path to the directory where files should be FTPd from TNM.
1.3.6.1.4.1.8708.2.28.2.3.23ScalarsoftwareCommandWarningCountread-onlycurrentShows the number of warnings encountered.
1.3.6.1.4.1.8708.2.28.2.3.24ScalarsoftwareCommandEnmReleaseread-onlycurrentThe current ENM release.
1.3.6.1.4.1.8708.2.28.2.3.25ScalarsoftwareCommandSubrackSlotExprread-writecurrentThe subrack and slot expression to perform action on If value is empty, 'all' is assumed. Expression follows mibsh swu command, accepting '<subrack> <slot>' or…
1.3.6.1.4.1.8708.2.28.2.4NodesoftwareLogList
1.3.6.1.4.1.8708.2.28.2.4.1TablesoftwareLogTablenot-accessiblecurrentThe list of software command log entries.
1.3.6.1.4.1.8708.2.28.2.4.1.1RowsoftwareLogEntrynot-accessiblecurrentAn entry in the command log list.
1.3.6.1.4.1.8708.2.28.2.4.1.1.1ColumnsoftwareLogIndexread-onlycurrentAn arbitrary index assigned to each log entry.
1.3.6.1.4.1.8708.2.28.2.4.1.1.2ColumnsoftwareLogNameread-onlycurrentThe name of the log entry.
1.3.6.1.4.1.8708.2.28.2.4.1.1.3ColumnsoftwareLogTransactionread-onlycurrentThe ID of the transaction generating the log entry.
1.3.6.1.4.1.8708.2.28.2.4.1.1.4ColumnsoftwareLogStringread-onlycurrentThe actual log string
1.3.6.1.4.1.8708.2.28.2.5NodelumentisSoftwareNotifications
1.3.6.1.4.1.8708.2.28.2.5.0NodesoftwareNotifyPrefix
1.3.6.1.4.1.8708.2.28.2.5.0.1NotificationsoftwareResultTrapcurrentSent when the software upgrade operation changes state.
1.3.6.1.4.1.8708.2.28.2.6NodesoftwareSpare
1.3.6.1.4.1.8708.2.28.2.6.1ScalarsoftwareSpareBoardAddrread-writecurrentThe IP address of the node.
1.3.6.1.4.1.8708.2.28.2.6.2ScalarsoftwareSpareBoardMaskread-writecurrentThe net mask of the node.
1.3.6.1.4.1.8708.2.28.2.6.3ScalarsoftwareSpareMasterAddrread-writecurrentThe IP address of the CU.
1.3.6.1.4.1.8708.2.28.2.6.4ScalarsoftwareSpareModeread-writecurrentIndicates how the spare part shall be configured. tu - normal TU standalone - boardAddress/mask will be set together with standalone attribute slave - boardAdd…
1.3.6.1.4.1.8708.2.28.2.6.5ScalarsoftwareSpareBackupServerread-onlycurrentThe IP address of the server storing backups.
1.3.6.1.4.1.8708.2.28.2.6.6ScalarsoftwareSpareBackupFileread-onlycurrentFull path to the backup file on remote server.
1.3.6.1.4.1.8708.2.28.2.6.7ScalarsoftwareSpareStateread-onlycurrentState of the spare part. waiting - trying to find CU installBoot - in progress of installing the boot installKernel - in progress of installing the kernel inst…
1.3.6.1.4.1.8708.2.28.2.6.8ScalarsoftwareSpareResultread-onlycurrentResult of the spare part operation
1.3.6.1.4.1.8708.2.28.2.6.9ScalarsoftwareSpareCommentStringread-onlycurrentDisplay comment about the state.
1.3.6.1.4.1.8708.2.28.2.6.10ScalarsoftwareSpareConfigureread-writecurrentConfigure a spare part. Run automatically when in spare part mode. Asks for the following: mode boardAddress - if mode is 'standalone' or 'slave' mask - if mod…
1.3.6.1.4.1.8708.2.28.2.7NodesoftwareExpectedSwList
1.3.6.1.4.1.8708.2.28.2.7.1TablesoftwareExpectedSwTablenot-accessiblecurrentThe list of software versions.
1.3.6.1.4.1.8708.2.28.2.7.1.1RowsoftwareExpectedSwEntrynot-accessiblecurrentAn entry in the software version list.
1.3.6.1.4.1.8708.2.28.2.7.1.1.1ColumnsoftwareExpectedSwIndexread-onlycurrentAn arbitrary index assigned to each expected software entry.
1.3.6.1.4.1.8708.2.28.2.7.1.1.2ColumnsoftwareExpectedSwNameread-onlycurrentThe name of the expected sw entry.
1.3.6.1.4.1.8708.2.28.2.7.1.1.3ColumnsoftwareExpectedSwCategoryread-onlycurrentThe category for this version
1.3.6.1.4.1.8708.2.28.2.7.1.1.4ColumnsoftwareExpectedSwBoardTyperead-onlycurrentThe board type that this applies to.
1.3.6.1.4.1.8708.2.28.2.7.1.1.5ColumnsoftwareExpectedSwFileNameread-onlycurrentThe name of the expected sw entry.
1.3.6.1.4.1.8708.2.28.2.7.1.1.6ColumnsoftwareExpectedSwPresentread-onlycurrentIndicates if the file already is present in the node.
1.3.6.1.4.1.8708.2.28.2.8NodesoftwareCuRep
1.3.6.1.4.1.8708.2.28.2.8.1ScalarsoftwareCuRepAdminStatusread-writecurrentThe administrative state for the alarm. down - No alarm will be rasied if SW packages are missing. service - No alarm will be rasied if SW packages are missing…
1.3.6.1.4.1.8708.2.28.2.8.2ScalarsoftwareCuRepUnSavedread-onlycurrentIf the configuration is saved or not.
1.3.6.1.4.1.8708.2.28.2.8.3ScalarsoftwareCuRepSystemModeread-onlycurrentIf dipswitch is changed or not.
1.3.6.1.4.1.8708.2.28.2.8.4ScalarsoftwareCuRepRebootCuread-writecurrentIf the CU should be rebooted or not.
1.3.6.1.4.1.8708.2.28.2.8.5ScalarsoftwareCuRepOkConfigureread-writecurrentConfigure an CU that has correct SW. Run automatically when in CU replacement mode when CU is an CU-SFP AND SW is correct. Asks for the following: Configuratio…
1.3.6.1.4.1.8708.2.28.2.8.6ScalarsoftwareCuRepSwPackagesMissingread-onlycurrentSoftware package file(s) are missing on master CU. When replacing or introducing CU or TU units some software packages needs to be downloaded to the master CU …
1.3.6.1.4.1.8708.2.28.2.8.7ScalarsoftwareCuRepSwNotDistributedread-onlycurrentSome SW package(s) needed to perform a CU replacement with automatic upgrade are not transferred to a traffic unit. This means that CU replacement with auto-up…
1.3.6.1.4.1.8708.2.28.2.8.8ScalarsoftwareCuRepSupportedReplacementsread-writecurrentThe types of control unit boards which should be supported as replacements for the current main control unit. The system will transfer the software packages fo…