MIB Viewer

MPLS-CEM-MIB

102 objects
This MIB contains managed object definitions for Circuit Emulation over MPLS as in: Malis, A., Vogelsang, S., and Martini, L. 'SONET/SDH Circuit Emulation Service Over MPLS (CEM) encapsulation', Internet Draft <draft-malis-sonet- ces-mpls-02.txt>, February 2001. This MIB is dependant on the MIBs as defined by T. Nadeau, C. Srinivasan, and A. Viswanathan <draft-ietf-mpls-lsr-mib-07.txt> and <draft-ietf-mpls-te-mib-05.txt>
OIDNameAccessStatusDescription
1.3.6.1.3.9999IdentitymplsCemMIBThis MIB contains managed object definitions for Circuit Emulation over MPLS as in: Malis, A., Vogelsang, S., and Martini, L. 'SONET/SDH Circuit Emulation Serv…
1.3.6.1.3.9999.0NodemplsCemNotifications
1.3.6.1.3.9999.0.0NodemplsCemNotifyPrefix
1.3.6.1.3.9999.0.0.1NotificationmplsCemVcUpcurrentThis notification is generated when a mplsCemVcOperStatus object for one of the configured CEM VC entries is about to leave the down state and transition into …
1.3.6.1.3.9999.0.0.2NotificationmplsCemVcDowncurrentThis notification is generated when a mplsCemVcOperStatus object for one of the configured CEM VC entries is about to enter the down state and transition into …
1.3.6.1.3.9999.0.0.3NotificationmplsCemVcApsFromcurrentThis notification is generated when the CEM VC APS mechanism has initiated a switch from the specified Index/Instance to find a 'good' CEM VC within the same g…
1.3.6.1.3.9999.0.0.4NotificationmplsCemVcApsTocurrentThis notification is generated when the CEM VC APS mechanism has switched to and settled on a CEM VC Index and Instance that is 'good' (whether from a bad VC o…
1.3.6.1.3.9999.1NodemplsCemObjects
1.3.6.1.3.9999.1.1ScalarmplsCemVcIndexNextread-onlycurrentThis object contains an appropriate value to be used for mplsCemVcIndex when creating entries in the mplsCemVcTable. The value 0 indicates that no unassigned e…
1.3.6.1.3.9999.1.2TablemplsCemVcTablenot-accessiblecurrentThis table specifies information for connecting SONET paths and MPLS Tunnels.
1.3.6.1.3.9999.1.2.1RowmplsCemVcEntrynot-accessiblecurrentA row in this table represents a connection for CEM. It is indexed by : - The mplsCemVcIndex. Uniquely identifying a singular CEM connection or a group. If a g…
1.3.6.1.3.9999.1.2.1.1ColumnmplsCemVcIndexaccessible-for-notifycurrentPrimary index for the conceptual row identifying a group of CEM VCs.
1.3.6.1.3.9999.1.2.1.2ColumnmplsCemVcInstanceaccessible-for-notifycurrentUniquely identifies an instance of a CEM VC. It is useful to identify multiple instances for the purpose of backup VCs.
1.3.6.1.3.9999.1.2.1.3ColumnmplsCemVcSonetPathIfIndexaccessible-for-notifycurrentThis is a unique index within the ifTable. It represents the interface index for the SONET path. A value of zero indicates an ifIndex that has yet to be config…
1.3.6.1.3.9999.1.2.1.4ColumnmplsCemVcLabelaccessible-for-notifycurrentThe incoming and outgoing label for this VC. This value is placed in the Label field of the outgoing MPLS shim header.
1.3.6.1.3.9999.1.2.1.5ColumnmplsCemVcPriorityread-createcurrentUsed when resources on a tunnel or backup tunnel are overbooked. The agent (connection admission control) can sort CEM VC entries that share an overbooked tunn…
1.3.6.1.3.9999.1.2.1.6ColumnmplsCemVcNameread-createcurrentThe canonical name assigned to the CEM VC. This name can be used to refer to the CEM VC on the LSRs console port.
1.3.6.1.3.9999.1.2.1.7ColumnmplsCemVcDescrread-createcurrentA textual string containing information about the CEM VC. If there is no description this object contains a zero length string.
1.3.6.1.3.9999.1.2.1.8ColumnmplsCemVcCreateTimeread-createcurrentSystem time when theis CEM VC was created.
1.3.6.1.3.9999.1.2.1.9ColumnmplsCemVcUpTimeread-onlycurrentNumber of consecutive ticks this CEM VC has been 'up' as observed in mplsCemVcOperStatus.
1.3.6.1.3.9999.1.2.1.10ColumnmplsCemVcInTunnelIndexread-createcurrentPart of set of indexes for inbound tunnel
1.3.6.1.3.9999.1.2.1.11ColumnmplsCemVcInTunnelInstanceread-createcurrentPart of set of indexes for inbound tunnel
1.3.6.1.3.9999.1.2.1.12ColumnmplsCemVcInTunnelIngLSRread-createcurrentPart of set of indexes for inbound tunnel
1.3.6.1.3.9999.1.2.1.13ColumnmplsCemVcInTunnelLclLSRread-createcurrentPart of set of indexes for inbound tunnel
1.3.6.1.3.9999.1.2.1.14ColumnmplsCemVcOutTunnelIndexread-createcurrentPart of set of indexes for outbound tunnel
1.3.6.1.3.9999.1.2.1.15ColumnmplsCemVcOutTunnelInstanceread-createcurrentPart of set of indexes for outbound tunnel
1.3.6.1.3.9999.1.2.1.16ColumnmplsCemVcOutTunnelLclLSRread-createcurrentPart of set of indexes for outbound tunnel
1.3.6.1.3.9999.1.2.1.17ColumnmplsCemVcOutTunnelEgrLSRread-createcurrentPart of set of indexes for outbound tunnel
1.3.6.1.3.9999.1.2.1.18ColumnmplsCemVcPktLengthread-createcurrentThis is the packet or payload length for this CEM VC. It is fixed and applies to inbound and outbound packets carrying user payload. Note: DBA packets have the…
1.3.6.1.3.9999.1.2.1.19ColumnmplsCemVcExpBitsread-createcurrentThis value is placed in the EXP bit field of the Danenberg et al Expires August 2001 18 Internet Draft MPLS CEM MIB February 2001 outbound MPLS shim header (wi…
1.3.6.1.3.9999.1.2.1.20ColumnmplsCemVcPktResequenceread-onlycurrentReports if implementation provides packet re-sequencing. With this, as inbound packets are queued in the jitter buffer, out of order packets are re-sequenced. …
1.3.6.1.3.9999.1.2.1.21ColumnmplsCemVcEnableDBAread-createcurrentAny bits set here MUST enable the DBA (dynamic bandwidth allocation) feature for the specified condition. Setting allOnesOnAis will cause CEM packet payload su…
1.3.6.1.3.9999.1.2.1.22ColumnmplsCemVcJtrBfrDepthread-createcurrentThis setting configures the number of packet buffers reserved for this CEM VC. (This object would not apply in implementations that support CEM VC groups, but …
1.3.6.1.3.9999.1.2.1.23ColumnmplsCemVcErrorActionread-createcurrentThese are the actions to take when inbound packets are missing due to gap in sequence numbers (uncorrectable via available re-sequencing), jitter buffer underr…
1.3.6.1.3.9999.1.2.1.24ColumnmplsCemVcDownActionread-createcurrentThese are the actions to take once the CEM VC has been declared 'down' (as observed in mplsCemVcOperStatus). These patterns are sent (played) on the SONET path…
1.3.6.1.3.9999.1.2.1.25ColumnmplsCemVcIntegrateToDown1read-createcurrentSee comment above - units are microseconds.
1.3.6.1.3.9999.1.2.1.26ColumnmplsCemVcIntegrateToDown2read-createcurrentSee comment above - units are microseconds.
1.3.6.1.3.9999.1.2.1.27ColumnmplsCemVcIntegrateToUp1read-createcurrentSee comment above - units are microseconds.
1.3.6.1.3.9999.1.2.1.28ColumnmplsCemVcIntegrateToUp2read-createcurrentSee comment above - units are microseconds.
1.3.6.1.3.9999.1.2.1.29ColumnmplsCemVcApsEnableread-createcurrentEnables this CEM VC (as part of a group) to be used for APS. A CEM VC group is created when a unique CEM VC index (in mplsCemVcTable) has multiple instances. S…
1.3.6.1.3.9999.1.2.1.30ColumnmplsCemVcApsCriteriaread-createcurrentBits set here represent defects and modes for switching the SONET path from the active CEM VC to another within this VC's group. Defects include: CEM errors (j…
1.3.6.1.3.9999.1.2.1.31ColumnmplsCemVcDefectsread-onlycurrentCurrent state of these CEM VC defects. The cemError indicator is a summary of any error associated with processing inbound CEM packets. Separately displaying C…
1.3.6.1.3.9999.1.2.1.32ColumnmplsCemVcApsHoldoffTimerread-createcurrentUsed to hold-off an APS switch after the CEM VC has been determined 'down'. The purpose is to allow potential recovery schemes within lower communications laye…
1.3.6.1.3.9999.1.2.1.33ColumnmplsCemVcApsRevertTimerread-createcurrentIf this CEM VC is active and 'up', then this timer is used in conjunction with 'revertive' (if set above). The reversion would be delayed for this time.
1.3.6.1.3.9999.1.2.1.34ColumnmplsCemVcApsStatusread-onlycurrentIf part of a CEM VC group, this indicates if the CEM VC has been selected (via APS algorithm/protocol) to connect the associated Tunnel to the SONET path. If n…
1.3.6.1.3.9999.1.2.1.35ColumnmplsCemVcLdpVcIdLengthread-createcurrentFor use by LDP signaling
1.3.6.1.3.9999.1.2.1.36ColumnmplsCemVcLdpGroupIdread-createcurrentFor use by LDP signaling
1.3.6.1.3.9999.1.2.1.37ColumnmplsCemVcLdpOptParam1read-createcurrentFor use by LDP signaling
1.3.6.1.3.9999.1.2.1.38ColumnmplsCemVcLdpOptParam2read-createcurrentFor use by LDP signaling
1.3.6.1.3.9999.1.2.1.39ColumnmplsCemVcTrapEnableread-writecurrentIf this object is true, generation of mplsCemVcUp and mplsCemVcDown traps aare enabled for this CEM VC, otherwise these traps are not emitted.
1.3.6.1.3.9999.1.2.1.40ColumnmplsCemVcAdminStatusread-createcurrentThe desired operational status of this CEM VC.
1.3.6.1.3.9999.1.2.1.41ColumnmplsCemVcOperStatusread-onlycurrentIndicates the actual operational status of this CEM VC.
1.3.6.1.3.9999.1.2.1.42ColumnmplsCemVcRowStatusread-createcurrentFor creating, modifying, and deleting this row.
1.3.6.1.3.9999.1.2.1.43ColumnmplsCemVcStorageTyperead-createcurrentThis variable indicates the storage type for this object.
1.3.6.1.3.9999.1.3TablemplsCemVcPerfTablenot-accessiblecurrentThis table provides per CEM VC performance information. Note: outbound errors are not being considered. It is assumed (at this time) that CEM packets will be f…
1.3.6.1.3.9999.1.3.1RowmplsCemVcPerfEntrynot-accessiblecurrentAn entry in this table is created by the agent for every mplsCemVcEntry. It is an extension to mplsCemVcEntry.
1.3.6.1.3.9999.1.3.1.1ColumnmplsCemVcPerfTotalInPacketsHCread-onlycurrentNumber of inbound packets received.
1.3.6.1.3.9999.1.3.1.2ColumnmplsCemVcPerfTotalOutPacketsHCread-onlycurrentNumber of outbound packets sent.
1.3.6.1.3.9999.1.3.1.3ColumnmplsCemVcPerfDbaInPacketsHCread-onlycurrentNumber of DBA packets received.
1.3.6.1.3.9999.1.3.1.4ColumnmplsCemVcPerfDbaOutPacketsHCread-onlycurrentNumber of DBA packets sent.
1.3.6.1.3.9999.1.3.1.5ColumnmplsCemVcPerfInNegPtrAdjustHCread-onlycurrentNumber of negative pointer adjustments made on the SONET path based on CEM pointer adjustments received.
1.3.6.1.3.9999.1.3.1.6ColumnmplsCemVcPerfInPosPtrAdjustHCread-onlycurrentNumber of postive pointer adjustments made on the SONET path based on CEM pointer adjustments received.
1.3.6.1.3.9999.1.3.1.7ColumnmplsCemVcPerfOutNegPtrAdjustHCread-onlycurrentNumber of negative pointer adjustments seen on the SONET path and encoded onto sent CEM packets.
1.3.6.1.3.9999.1.3.1.8ColumnmplsCemVcPerfOutPosPtrAdjustHCread-onlycurrentNumber of positive pointer adjustments seen on the SONET path and encoded onto sent CEM packets.
1.3.6.1.3.9999.1.3.1.9ColumnmplsCemVcPerfCrctHdrErrorsread-onlycurrentNumber of correctable CEM header errors detected on inbound CEM packets.
1.3.6.1.3.9999.1.3.1.10ColumnmplsCemVcPerfUncrctHdrErrorsread-onlycurrentNumber of uncorrectable CEM header errors detected on inbound CEM packets.
1.3.6.1.3.9999.1.3.1.11ColumnmplsCemVcPerfMissingPktsread-onlycurrentNumber of missing packets (as detected via CEM header sequence number gaps).
1.3.6.1.3.9999.1.3.1.12ColumnmplsCemVcPerfPktsOoseqread-onlycurrentNumber of packets detected out of sequence (via CEM header sequence numbers), but were able to be re-sequenced. That is, the differential in sequence numbers w…
1.3.6.1.3.9999.1.3.1.13ColumnmplsCemVcPerfJtrBfrUnderrunsread-onlycurrentNumber of times the jitter buffer transitioned to empty.
1.3.6.1.3.9999.1.3.1.14ColumnmplsCemVcPerfJtrBfrOverrunsread-onlycurrentNumber of packets received while jitter buffer is full.
1.3.6.1.3.9999.1.3.1.15ColumnmplsCemVcPerfDiscontinuityTimeread-onlycurrentThe value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such disco…
1.3.6.1.3.9999.1.4TablemplsCemMappingTablenot-accessiblecurrentThis table maps an inbound Tunnel/VcLabel to a CEM VC.
1.3.6.1.3.9999.1.4.1RowmplsCemMappingEntrynot-accessiblecurrentA row in this table represents the inbound connection between a Tunnel/VcLabel and CEM VC/instance. It is indexed by the same 4 indexes that index the inbound …
1.3.6.1.3.9999.1.4.1.1ColumnmplsCemMappingInTunnelIndexaccessible-for-notifycurrentPrimary index for the conceptual row identifying a group of Tunnel/VcLabel to CEM VC mappings.
1.3.6.1.3.9999.1.4.1.2ColumnmplsCemMappingInTunnelInstanceaccessible-for-notifycurrentUniquely identifies an instance of a mapping
1.3.6.1.3.9999.1.4.1.3ColumnmplsCemMappingInTunnelIngressLSRaccessible-for-notifycurrentUniquely identifies an ingress LSR
1.3.6.1.3.9999.1.4.1.4ColumnmplsCemMappingInTunnelLocalLSRaccessible-for-notifycurrentUniquely identifies the local LSR
1.3.6.1.3.9999.1.4.1.5ColumnmplsCemMappingVcLabelaccessible-for-notifycurrentIdentifies a unique label on this tunnel
1.3.6.1.3.9999.1.4.1.6ColumnmplsCemMappingVcIndexread-createcurrentIndex for entry (or group of entries, in the case of backup VCs) in the mplsCemVcTable. This value can also be thought of as the Circuit ID.
1.3.6.1.3.9999.1.4.1.7ColumnmplsCemMappingVcInstanceread-createcurrentIdentifies a unique member within a CEM VC group. (This could of course be a group of one.)
1.3.6.1.3.9999.1.4.1.8ColumnmplsCemMappingRowStatusread-createcurrentFor creating, modifying, and deleting this row.
1.3.6.1.3.9999.1.4.1.9ColumnmplsCemMappingStorageTyperead-createcurrentThis variable indicates the storage type for this object.
1.3.6.1.3.9999.1.5TablemplsCemTunnelExtTablenot-accessiblecurrentThis table is an extension to the mplsTunnelTable. This table exists to configure parameters useful for CEM APS.
1.3.6.1.3.9999.1.5.1RowmplsCemTunnelExtEntrynot-accessiblecurrentA row in this table represents a Tunnel used for CEM VCs. The Tunnel referenced here is in the mplsTunnelTable. It is indexed by the same 4 indexes of the inbo…
1.3.6.1.3.9999.1.5.1.1ColumnmplsCemTunnelExtApsEnableread-createcurrentEnables this Tunnel (as part of a group) to be used for APS. Remember a Tunnel group is created when a unique Tunnel index (in mplsTunnelTable) has multiple in…
1.3.6.1.3.9999.1.5.1.6ColumnmplsCemTunnelExtApsCriteriaread-writecurrentBits set here represent defects and modes for switching all VCs within this Tunnel to another Tunnel that has no APS defects. Currently, only CEM defects are a…
1.3.6.1.3.9999.1.5.1.7ColumnmplsCemTunnelExtDefectsread-onlycurrentCurrent state of Tunnel defect indications. Other bits here may be defined here to show results of error trend analysis. Note: These bits MUST be aligned with …
1.3.6.1.3.9999.1.5.1.8ColumnmplsCemTunnelExtApsHoldoffTimerread-createcurrentPrimarily used to hold-off an APS switch after the Tunnel has been determined 'down'. The purpose is to allow potential recovery schemes within lower communica…
1.3.6.1.3.9999.1.5.1.9ColumnmplsCemTunnelExtApsRevertTimerread-createcurrentIf this Tunnel is active and 'up', then this timer is used in conjunction with 'revertive' (if set above). The reversion would be delayed for this time.
1.3.6.1.3.9999.1.5.1.10ColumnmplsCemTunnelExtApsViaCemVcIndexread-writecurrentIndex of the CEM VC from which APS defect criteria are included with this Tunnel's APS criteria.
1.3.6.1.3.9999.1.5.1.11ColumnmplsCemTunnelExtApsViaCemVcInstanceread-writecurrentInstance of the CEM VC from which APS defect criteria are included with this Tunnel's APS criteria.
1.3.6.1.3.9999.1.5.1.12ColumnmplsCemTunnelExtStorageTyperead-writecurrentThis variable indicates the storage type for this object.
1.3.6.1.3.9999.1.6TablemplsCemTunnelExtPerfTablenot-accessiblecurrentThis table is an extension to the mplsTunnelTable. It provides per Tunnel performance information.
1.3.6.1.3.9999.1.6.1RowmplsCemTunnelExtPerfEntrynot-accessiblecurrentAn entry in this table is created by the agent for every mplsCemTunnelExtEntry. It is an extension to mplsCemTunnelExtEntry.
1.3.6.1.3.9999.1.6.1.1ColumnmplsCemTunnelExtPerfFailedLabelLookupsread-onlycurrentNumber of packets with unexpected labels received. This count is based on inbound VC labels seen that are not configured for this Tunnel.
1.3.6.1.3.9999.1.6.1.2ColumnmplsCemTunnelExtPerfLastFailedLookupread-onlycurrentContains label from the packet that last failed a label lookup on this Tunnel.
1.3.6.1.3.9999.1.7TablemplsCemSonetPathExtTablenot-accessiblecurrentThis table associates a SONET path with a CEM VC Danenberg et al Expires August 2001 35 Internet Draft MPLS CEM MIB February 2001 (or CEM VC group) and provide…
1.3.6.1.3.9999.1.7.1RowmplsCemSonetPathExtEntrynot-accessiblecurrentThis table is indexed by the SONET path ifIndex. An entry to this table is created by the agent when an entry is created in the mplsCemVcTable.
1.3.6.1.3.9999.1.7.1.1ColumnmplsCemSonetPathExtVcIndexread-writecurrentIndex to entry in the mplsCemVcTable.
1.3.6.1.3.9999.1.7.1.2ColumnmplsCemSonetPathExtTimeSlotread-writecurrentStarting time-slot for this SONET path within the SONET line and section. For OC-48, this value could range from 1 to 48. The SONET path width must be taken in…
1.3.6.1.3.9999.1.7.1.3ColumnmplsCemSonetPathExtStorageTyperead-writecurrentThis variable indicates the storage type for this object.
1.3.6.1.3.9999.1.8ScalarmplsCemTrapEnableread-writecurrentIf this object is true, then it enables the generation of mplsCemVcUp and mplsCemVcDown traps, otherwise these traps are not emitted. These traps are also indi…