OPTIX-RTN-CPRI-MGR-MIB
18 objects
This module is used to configure and query parameters for the CPRI function of IF boards, including the active cpri mode, and query the cpri mode.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.40.16 | IdentityoptixRtnCPRIMgr | This module is used to configure and query parameters for the CPRI function of IF boards, including the active cpri mode, and query the cpri mode. | ||
| 1.3.6.1.2.1.10.4.40.16.1 | NodeoptixBoardCpriAttr | |||
| 1.3.6.1.2.1.10.4.40.16.1.2 | TableoptixRtnCpriPortDelayAndJitterTable | not-accessible | current | Start the delay and jitter test of the CPRI port. |
| 1.3.6.1.2.1.10.4.40.16.1.2.1 | RowoptixRtnCpriPortDelayAndJitterEntry | not-accessible | current | Entry to start the delay and jitter test of the CPRI port. |
| 1.3.6.1.2.1.10.4.40.16.1.2.1.1 | ColumnoptixRtnCpriAccessType | read-only | current | CPRI access-side type, BBU or RRU. 1: BBU; 2: RRU |
| 1.3.6.1.2.1.10.4.40.16.1.2.1.2 | ColumnoptixRtnCpriPortDelay | read-only | current | CPRI port delay |
| 1.3.6.1.2.1.10.4.40.16.1.2.1.3 | ColumnoptixRtnCpriPortJitter | read-only | current | CPRI port jitter |
| 1.3.6.1.2.1.10.4.40.16.1.2.1.4 | ColumnoptixRtnCpriPortStartStatus | read-write | current | Start the CPRI delay and jitter test. |
| 1.3.6.1.2.1.10.4.40.16.1.3 | TableoptixRtnCpriBerthTable | not-accessible | current | Query the bit error threshold of the CPRI port. |
| 1.3.6.1.2.1.10.4.40.16.1.3.1 | RowoptixRtnCpriBerthEntry | not-accessible | current | Entry to query the bit error threshold of the CPRI port. |
| 1.3.6.1.2.1.10.4.40.16.1.3.1.1 | ColumnoptixRtnCpriPortBerth | read-write | current | Bit error threshold of the CPRI port |
| 1.3.6.1.2.1.10.4.40.16.1.4 | TableoptixRtnCPRIPortActiveTable | not-accessible | current | Table of active cpri mode |
| 1.3.6.1.2.1.10.4.40.16.1.4.1 | RowoptixRtnCPRIPortActiveEntry | not-accessible | current | active cpri mode |
| 1.3.6.1.2.1.10.4.40.16.1.4.1.1 | ColumnoptixRtnCpriPortActiveStatus | read-write | current | active cpri mode |
| 1.3.6.1.2.1.10.4.40.16.1.5 | TableoptixRtnCPRIPortGeneralAttribNewTable | not-accessible | current | Describes general attributes of an IF board, including the cpri status. |
| 1.3.6.1.2.1.10.4.40.16.1.5.1 | RowoptixRtnCPRIPortGeneralAttribNewEntry | not-accessible | current | Indicates the management entry for the general attributes of an CPRI port. |
| 1.3.6.1.2.1.10.4.40.16.1.5.1.1 | ColumnoptixRtnCpriPortModeNew | read-only | current | query cpri mode. 380: cpri(1) nocpri(2) 380H/380HN: cpri(1) none(2) obsai(3) |
| 1.3.6.1.2.1.10.4.40.16.1.5.1.2 | ColumnoptixRtnCpriPortSpeedNew | read-only | current | the cpri speed. 380: cpri1p25(1) cpri2p5(2) 380H/380HN: cpri-1p25compress(0) cpri-1p25transparent(1) cpri-2p5compress(2) cpri-2p5transparent(3) cpri-3gcompress… |