OPTIX-RTN-IFBOARD-ATTRIB-MIB
358 objects
This module is used to configure and query IF board related parameters required in radio link configuration and preventive maintenance, including the IF board modulation mode, bandwidth, AM management, and link identifier.
Imported Objects
| OPTIX-OID-MIB | optixProvisionRtn |
| OPTIX-RTN-GENNERAL-MIB | OPTIXRtnEnableStateType optixRtnIndex1 optixRtnIndex2 optixRtnIndex3 optixRtnIndex4 |
| OPTIX-RTN-ODU-MGR-MIB | optixRtnOduIndex1 optixRtnOduIndex2 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.40.3 | IdentityoptixRtnIFBoardAttr | This module is used to configure and query IF board related parameters required in radio link configuration and preventive maintenance, including the IF board … | ||
| 1.3.6.1.2.1.10.4.40.3.1 | TableoptixRtnIFPortModemFeatureTable | not-accessible | current | Describes AM parameters of an IF board, including the AM status. |
| 1.3.6.1.2.1.10.4.40.3.1.1 | RowoptixRtnIFPortModemFeatureEntry | not-accessible | current | Indicates the management entry for the AM parameters of an IF port. |
| 1.3.6.1.2.1.10.4.40.3.1.1.2 | ColumnoptixRtnIFPortIFLoopMode | read-write | current | Indicates the modem loop mode .it has three mode type : noloop and inloop,outloop |
| 1.3.6.1.2.1.10.4.40.3.1.1.3 | ColumnoptixRtnIFPortAmbooster | read-write | current | Indicates the Ambooster work mode.It has two mode type :disable and enable(nonsupport) |
| 1.3.6.1.2.1.10.4.40.3.1.1.4 | ColumnoptixRtnIFPortCarrierOutputState | read-write | current | Indicates the if carrier output state |
| 1.3.6.1.2.1.10.4.40.3.3 | TableoptixRtnIFPortStateTable | not-accessible | current | Describes AM parameters of an IF board, including the AM status. |
| 1.3.6.1.2.1.10.4.40.3.3.1 | RowoptixRtnIFPortStateEntry | not-accessible | current | Indicates the management entry for the AM parameters of an IF port. |
| 1.3.6.1.2.1.10.4.40.3.3.1.1 | ColumnoptixRtnIFPortState | read-write | current | Indicates the if port state |
| 1.3.6.1.2.1.10.4.40.3.4 | TableoptixRtnIfConfluxPortRfMapTable | not-accessible | current | Describes parameters of the modu. |
| 1.3.6.1.2.1.10.4.40.3.4.1 | RowoptixRtnIfConfluxPortRfMapEntry | not-accessible | current | Indicates the parameter entry for the modu. |
| 1.3.6.1.2.1.10.4.40.3.4.1.4 | ColumnoptixRtnIfConfluxRole | read-write | current | Indicates a role. |
| 1.3.6.1.2.1.10.4.40.3.4.1.5 | ColumnoptixRtnIfConfluxBoardId | read-write | current | Indicates the IF unit board ID. |
| 1.3.6.1.2.1.10.4.40.3.4.1.6 | ColumnoptixRtnIfConfluxSubCardId | read-write | current | Indicates the subboard ID. |
| 1.3.6.1.2.1.10.4.40.3.4.1.7 | ColumnoptixRtnIfConfluxPortId | read-write | current | Indicates the Port ID. |
| 1.3.6.1.2.1.10.4.40.3.4.1.8 | ColumnoptixRtnIfConfluxPosition | read-write | current | Indicates the Position. |
| 1.3.6.1.2.1.10.4.40.3.4.1.9 | ColumnoptixRtnIfConfluxMode | read-write | current | Indicates the if conflux mode. |
| 1.3.6.1.2.1.10.4.40.3.4.1.10 | ColumnoptixRtnRfMapBoardId | read-only | current | Indicates the RF unit board ID. |
| 1.3.6.1.2.1.10.4.40.3.4.1.11 | ColumnoptixRtnRfMapSubCardId | read-only | current | Indicates the subboard ID. |
| 1.3.6.1.2.1.10.4.40.3.4.1.12 | ColumnoptixRtnRfMapPortId | read-only | current | Indicates the Port ID. |
| 1.3.6.1.2.1.10.4.40.3.4.1.13 | ColumnoptixRtnRfMapCarrier | read-only | current | Indicates the Carrier. |
| 1.3.6.1.2.1.10.4.40.3.4.1.14 | ColumnoptixRtnRfMapPosition | read-only | current | Indicates the Position. |
| 1.3.6.1.2.1.10.4.40.3.5 | TableoptixRtnIFPortSnrMsethNewTable | not-accessible | current | Describes AM parameters of an IF board, including the AM status. |
| 1.3.6.1.2.1.10.4.40.3.5.1 | RowoptixRtnIFPortSnrMsethNewEntry | not-accessible | current | Indicates the management entry for the AM parameters of an IF port. |
| 1.3.6.1.2.1.10.4.40.3.5.1.1 | ColumnoptixRtnIFPortSnrBandWidth | read-only | current | Indicates the BandWidth of the Channel.Values: 1: 3.5M 2: 7.0M 3: 14M 4: 28M 5: 40M 6: 56M 7: FCC30M 8: FCC40M 9: FCC50M 10: 250M; 11: 500M; 12:750M; 16: 62P5M… |
| 1.3.6.1.2.1.10.4.40.3.5.1.2 | ColumnoptixRtnIFPortSnrBottomMod | read-only | current | Indicates the bottom modulation mode.Values:modeClear(0),modeQPSK(1),mode16QAM(2),mode32QAM(3),mode64QAM(4),mode128QAM(5),mode256QAM(6),mode512QAM(7),mode1024Q… |
| 1.3.6.1.2.1.10.4.40.3.5.1.3 | ColumnoptixRtnIFPortSnrGuaranteeMseValue | read-only | current | Indicates the MSE thresholds in the guaranteed capacity modulation mode. Unit: 0.1 db |
| 1.3.6.1.2.1.10.4.40.3.5.1.4 | ColumnoptixRtnIFPortSnrPeakMod | read-only | current | Indicates the peak modulation mode.Values:modeClear(0),modeQPSK(1),mode16QAM(2),mode32QAM(3),mode64QAM(4),mode128QAM(5),mode256QAM(6),mode512QAM(7),mode1024QAM… |
| 1.3.6.1.2.1.10.4.40.3.5.1.5 | ColumnoptixRtnIFPortSnrPeakMseValue | read-only | current | Indicates the MSE thresholds in the full capability modulation mode. Unit: 0.1 db |
| 1.3.6.1.2.1.10.4.40.3.10 | NodeoptixISBoardAttr | |||
| 1.3.6.1.2.1.10.4.40.3.10.1 | TableoptixRtnIFPortAlmToAisTable | not-accessible | current | Describes whether the link alarm AIS insertion of the IF board is enabled. |
| 1.3.6.1.2.1.10.4.40.3.10.1.1 | RowoptixRtnIFPortAlmToAisEntry | not-accessible | current | Indicates whether the link alarm AIS insertion of the IF board is enabled. |
| 1.3.6.1.2.1.10.4.40.3.10.1.1.1 | ColumnoptixRtnIFPortAlmID | read-write | current | Indicates the ID of a link alarm. |
| 1.3.6.1.2.1.10.4.40.3.10.1.1.2 | ColumnoptixRtnIFPortAlmToAisEnable | read-write | current | Indicates whether the alarm AIS insertion is enabled. |
| 1.3.6.1.2.1.10.4.40.3.10.2 | TableoptixRtnIFPortE1AisToTuAisTable | not-accessible | current | Describes whether the E1_AIS is inserted to the TU_AIS in an IF E1 channel. |
| 1.3.6.1.2.1.10.4.40.3.10.2.1 | RowoptixRtnIFPortE1AisToTuAisEntry | not-accessible | current | Indicates whether the E1_AIS is inserted to the TU_AIS in an IF E1 channel. |
| 1.3.6.1.2.1.10.4.40.3.10.2.1.1 | ColumnoptixRtnIFPortHPid | read-write | current | Indicates the ID of an higher order E1 channel. |
| 1.3.6.1.2.1.10.4.40.3.10.2.1.2 | ColumnoptixRtnIFPortLPid | not-accessible | current | Indicates the ID of an lower order E1 channel. |
| 1.3.6.1.2.1.10.4.40.3.10.2.1.3 | ColumnoptixRtnIFPortE1AisToTuAisEnable | read-write | current | Indicates whether the E1_AIS is inserted to the TU_AIS.Values: disable(0), enable(1), auto(2) |
| 1.3.6.1.2.1.10.4.40.3.10.4 | TableoptixRtnLineFindTable | not-accessible | current | This table describes information about fiber and cable search. |
| 1.3.6.1.2.1.10.4.40.3.10.4.1 | RowoptixRtnLineFindEntry | not-accessible | current | Management entry of fiber and cable search. |
| 1.3.6.1.2.1.10.4.40.3.10.4.1.5 | ColumnoptixRtnLineFindOutNeid | read-only | current | Source NE ID |
| 1.3.6.1.2.1.10.4.40.3.10.4.1.6 | ColumnoptixRtnLineFindOutBid | read-only | current | Source board id |
| 1.3.6.1.2.1.10.4.40.3.10.4.1.7 | ColumnoptixRtnLineFindOutSubcardId | read-only | current | Source subcard id |
| 1.3.6.1.2.1.10.4.40.3.10.4.1.8 | ColumnoptixRtnLineFindOutPid | read-only | current | Source port id |
| 1.3.6.1.2.1.10.4.40.3.10.4.1.9 | ColumnoptixRtnLineFindInNeid | read-only | current | Sink NE ID |
| 1.3.6.1.2.1.10.4.40.3.10.4.1.10 | ColumnoptixRtnLineFindInBid | read-only | current | Sink board id |
| 1.3.6.1.2.1.10.4.40.3.10.4.1.11 | ColumnoptixRtnLineFindInSubcardId | read-only | current | Sink subcard id |
| 1.3.6.1.2.1.10.4.40.3.10.4.1.12 | ColumnoptixRtnLineFindInPid | read-only | current | Sink port id |
| 1.3.6.1.2.1.10.4.40.3.10.4.1.13 | ColumnoptixRtnLineFindStartNode | read-write | current | Start linefind |
| 1.3.6.1.2.1.10.4.40.3.10.5 | TableoptixRtnIFPortQueueAttribTable | not-accessible | current | Describes general attributes of an IF board. |
| 1.3.6.1.2.1.10.4.40.3.10.5.1 | RowoptixRtnIFPortQueueAttribEntry | not-accessible | current | Indicates management entry for the attributes of an IF port queue. |
| 1.3.6.1.2.1.10.4.40.3.10.5.1.1 | ColumnoptixRtnQueueType | not-accessible | current | This object indicates the queue type of the IF Board. |
| 1.3.6.1.2.1.10.4.40.3.10.5.1.2 | ColumnoptixRtnEnhancedCompressEnableStatus | read-write | current | Indicates whether to compress the payload and packet headers. Compressing the payload and packet headers can save bandwidth and increase service transmission t… |
| 1.3.6.1.2.1.10.4.40.3.10.6 | TableoptixRtnLinkInfoTable | not-accessible | current | Describes attributes associated with link monitoring. |
| 1.3.6.1.2.1.10.4.40.3.10.6.1 | RowoptixRtnLinkInfoEntry | not-accessible | current | Indicates a link monitoring management entry. |
| 1.3.6.1.2.1.10.4.40.3.10.6.1.4 | ColumnoptixRtnLinkWatch | read-write | current | Specifies the status of link monitoring. |
| 1.3.6.1.2.1.10.4.40.3.10.6.1.5 | ColumnoptixRtnStartTime | read-only | current | Indicates the start time for link monitoring. |
| 1.3.6.1.2.1.10.4.40.3.10.6.1.6 | ColumnoptixRtnCurrentRecordNum | read-only | current | Indicates the total number of link monitoring records. |
| 1.3.6.1.2.1.10.4.40.3.10.6.1.7 | ColumnoptixRtnCurrentRslNum | read-only | current | Indicates the number of RSL links in link monitoring. |
| 1.3.6.1.2.1.10.4.40.3.10.6.1.8 | ColumnoptixRtnCurrentLinkInfo | read-only | current | Indicates the MSE and RSL link monitoring information. |
| 1.3.6.1.2.1.10.4.40.3.10.7 | TableoptixRtnStdLinkInfoTable | not-accessible | current | Describes attributes associated with link monitoring. |
| 1.3.6.1.2.1.10.4.40.3.10.7.1 | RowoptixRtnStdLinkInfoEntry | not-accessible | current | Indicates a link monitoring management entry. |
| 1.3.6.1.2.1.10.4.40.3.10.7.1.2 | ColumnoptixRtnStandardRecordNum | read-only | current | Indicates the standard number of RSL links in link monitoring. |
| 1.3.6.1.2.1.10.4.40.3.10.7.1.3 | ColumnoptixRtnStandardLinkInfo | read-only | current | Indicates the standard MSE and RSL link monitoring information. |
| 1.3.6.1.2.1.10.4.40.3.10.8 | TableoptixRtnIFPortXPICFeatureExtTable | not-accessible | current | Include some command about XPIC, such as:set/get XPIC state, set/get XPIC bdPolar, set/get XPIC linkId and Synchronization information to adjoin link. |
| 1.3.6.1.2.1.10.4.40.3.10.8.1 | RowoptixRtnIFPortXPICFeatureExtEntry | not-accessible | current | Describe some command about XPIC |
| 1.3.6.1.2.1.10.4.40.3.10.8.1.2 | ColumnoptixRtnIFPortXPICBdPolarExt | read-write | current | Describe the bdpolar of XPIC and set the bdpolar of XPIC. |
| 1.3.6.1.2.1.10.4.40.3.10.8.1.3 | ColumnoptixRtnIFPortXPICAjoinLinkIdExt | read-write | current | Describes the XPIC adjoin link Id and set the XPIC adjoin link Id |
| 1.3.6.1.2.1.10.4.40.3.10.8.1.4 | ColumnoptixRtnIFPortXPICSyncAjoinInfoExt | read-write | current | synchronism the local NE information to adjoin NE.(nonsupport) |
| 1.3.6.1.2.1.10.4.40.3.10.10 | TableoptixRtnPortIndexTable | not-accessible | current | Used as the public index table for IF board attribute tables. |
| 1.3.6.1.2.1.10.4.40.3.10.10.1 | RowoptixRtnPortIndexEntry | not-accessible | current | Indicates the index entry for IF ports. |
| 1.3.6.1.2.1.10.4.40.3.10.10.1.1 | ColumnoptixRtnBoardID | not-accessible | current | Indicates the slot ID. |
| 1.3.6.1.2.1.10.4.40.3.10.10.1.2 | ColumnoptixRtnSubCardID | not-accessible | current | Indicates the subboard ID. |
| 1.3.6.1.2.1.10.4.40.3.10.10.1.3 | ColumnoptixRtnPortID | not-accessible | current | Indicates the port ID. |
| 1.3.6.1.2.1.10.4.40.3.10.20 | TableoptixRtnIFPortGeneralAttribTable | not-accessible | current | Describes general attributes of an IF board, including the link ID and the XPIC status. |
| 1.3.6.1.2.1.10.4.40.3.10.20.1 | RowoptixRtnIFPortGeneralAttribEntry | not-accessible | current | Indicates the management entry for the general attributes of an IF port. |
| 1.3.6.1.2.1.10.4.40.3.10.20.1.1 | ColumnoptixRtnIFPortCfgLinkID | read-write | current | Indicates the current radio link ID. As an identifier of a radio link, this parameter is used to prevent incorrect connections of radio links between sites. Va… |
| 1.3.6.1.2.1.10.4.40.3.10.20.1.2 | ColumnoptixRtnIFPortRealLinkID | read-only | current | Indicates the received radio link ID. If the received link ID is the same as that at the local end, the received signal is valid; otherwise, the local end inse… |
| 1.3.6.1.2.1.10.4.40.3.10.20.1.3 | ColumnoptixRtnIFPort1588OHEnableStatus | read-write | current | Indicates whether the IEEE-1588 timeslot is enabled. If the RTN equipment and other packet equipment adopt the clock tracing by the IEEE 1588 protocol, the par… |
| 1.3.6.1.2.1.10.4.40.3.10.20.1.4 | ColumnoptixRtnIFPortServiceType | read-write | current | Indicates the IF service type. The values: 1: Hybrid (Native E1+ETH), indicating that the IF port carries hybrid services that integrate the Native E1 and Ethe… |
| 1.3.6.1.2.1.10.4.40.3.10.20.1.6 | ColumnoptixRtnIFPortBipOverThreshold | read-write | current | Indicates the threshold of error codes that trigger signal failures on an IF port. |
| 1.3.6.1.2.1.10.4.40.3.10.20.1.7 | ColumnoptixRtnIFPortBipSDThreshold | read-write | current | Indicates the threshold of error codes that trigger signal degradations on an IF port. |
| 1.3.6.1.2.1.10.4.40.3.10.20.1.8 | ColumnoptixRtnIFPortRunMode | read-write | current | Describes the running mode supported by an IF board. Values: 0: IS2 1: IS3 2: ACCP 3: NONACCP 4:IS6 5:SHACCP 6:IS6-PLUS 7:eband-common 8:eband-enhanced 9:IS8 1… |
| 1.3.6.1.2.1.10.4.40.3.10.20.1.9 | ColumnoptixRtnIFPortMuxLoopMode | read-write | current | Indicates a loopback at a multiplex port.it has three mode type : noloop and inloop,outloop |
| 1.3.6.1.2.1.10.4.40.3.10.20.1.10 | ColumnoptixRtnMwPortAlmPerEn | read-write | current | Indicates whether an MW port's alarm and performance is enabled to report. Values: 0: disabled 1: enabled |
| 1.3.6.1.2.1.10.4.40.3.10.21 | TableoptixRtnIFPortBandWidthTable | not-accessible | current | Describes BandWidth of an IF board |
| 1.3.6.1.2.1.10.4.40.3.10.21.1 | RowoptixRtnIFPortBandWidthEntry | not-accessible | current | Indicates the management entry for the BandWidth of an IF port. |
| 1.3.6.1.2.1.10.4.40.3.10.21.1.1 | ColumnoptixRtnIFPortBandWidth | read-write | current | Indicates the bandwidth. This parameter varies with the equipment version. Values: 1: 3.5M 2: 7.0M 3: 14M 4: 28M 5: 40M 6: 56M 7: FCC30M 8: FCC40M 9: FCC50M 10… |
| 1.3.6.1.2.1.10.4.40.3.10.30 | TableoptixRtnIFPortAdvanceAttribTable | not-accessible | current | Describes general attributes of an IF board, including whether error frame discarding is enabled. |
| 1.3.6.1.2.1.10.4.40.3.10.30.1 | RowoptixRtnIFPortAdvanceAttribEntry | not-accessible | current | Indicates management entry for advanced attributes of an IF port. |
| 1.3.6.1.2.1.10.4.40.3.10.30.1.1 | ColumnoptixRtnIFPortErrorFrameDiscardStatus | read-write | current | Indicates whether error frame discarding is enabled or not.'enabled' indicates that the Ethernet packet is discarded if error frames are found. 'disable' indic… |
| 1.3.6.1.2.1.10.4.40.3.10.30.1.2 | ColumnoptixRtnIFPortEthL2CompressEnableStatus | read-write | current | Indicates whether to compress the MAC address header. Compressing the packet header can save bandwidth to transmit more services, but requires a license. Value… |
| 1.3.6.1.2.1.10.4.40.3.10.30.1.3 | ColumnoptixRtnIFPortEthL3CompressEnableStatus | read-write | current | Indicates whether to compress the IP address header. Compressing the packet header can save bandwidth to transmit more services, but requires a license. Values… |
| 1.3.6.1.2.1.10.4.40.3.10.40 | TableoptixRtnIFPortAMParameterTable | not-accessible | current | Describes AM parameters of an IF board, including the AM status. |
| 1.3.6.1.2.1.10.4.40.3.10.40.1 | RowoptixRtnIFPortAMParameterEntry | not-accessible | current | Indicates the management entry for the AM parameters of an IF port. |
| 1.3.6.1.2.1.10.4.40.3.10.40.1.2 | ColumnoptixRtnIFPortAMEnableStatus | read-write | current | Indicates whether an IF port is enabled with AM. When the parameter is set to enabled, the radio link uses the corresponding modulation scheme according to the… |
| 1.3.6.1.2.1.10.4.40.3.10.40.1.3 | ColumnoptixRtnIFPortAMBottomMod | read-write | current | Indicates the lowest-order modulation scheme that the AM function supports. Values: 310: 1: QPSK; 2: 16QAM; 3: 32QAM; 4: 64QAM; 5: 128QAM; 6: 256QAM; 7: 512QAM… |
| 1.3.6.1.2.1.10.4.40.3.10.40.1.4 | ColumnoptixRtnIFPortAMPeakMod | read-write | current | Indicates the highest-order modulation scheme that the AM function supports. Values: 310: 1: QPSK; 2: 16QAM; 3: 32QAM; 4: 64QAM; 5: 128QAM; 6: 256QAM; 7: 512QA… |
| 1.3.6.1.2.1.10.4.40.3.10.40.1.5 | ColumnoptixRtnIFPortAMManualMod | read-write | current | Indicates the manually specified modulation scheme. Values: 310: 1: QPSK; 2: 16QAM; 3: 32QAM; 4: 64QAM; 5: 128QAM; 6: 256QAM; 7: 512QAM; 8: 1024QAM; 9: QPSKSTR… |
| 1.3.6.1.2.1.10.4.40.3.10.40.1.6 | ColumnoptixRtnIFPortE1PriorStatus | read-write | current | Indicates whether the E1 Priority is enabled. When the parameter is set to enabled, the NE processes E1 services based on the preset priority, that is, transmi… |
| 1.3.6.1.2.1.10.4.40.3.10.41 | TableoptixRtnIFPortAcmSymmetricTable | not-accessible | current | Indicates the symmetric or non symmetric mode of the acm. |
| 1.3.6.1.2.1.10.4.40.3.10.41.1 | RowoptixRtnIFPortAcmSymmetricEntry | not-accessible | current | Indicates the symmetric or non symmetric mode of the acm. |
| 1.3.6.1.2.1.10.4.40.3.10.41.1.4 | ColumnoptixRtnIFPortAcmSymmetricValue | read-write | current | The value of acm mode. |
| 1.3.6.1.2.1.10.4.40.3.10.42 | TableoptixRtnIFPortRadioIfModeTable | not-accessible | current | Describes AM parameters of an IF board, including the AM status. |
| 1.3.6.1.2.1.10.4.40.3.10.42.1 | RowoptixRtnIFPortRadioIfModeEntry | not-accessible | current | Indicates the management entry for the AM parameters of an IF port. |
| 1.3.6.1.2.1.10.4.40.3.10.42.1.4 | ColumnoptixRtnIFPortRadioAllIfMode | read-only | current | Indicates the channel spacing. This parameter varies with the equipment version. Values: 1: 3.5M 2: 7.0M 3: 14M 4: 28M 5: 40M 6: 56M 7: FCC30M 8: FCC40M 9: FCC… |
| 1.3.6.1.2.1.10.4.40.3.10.42.1.5 | ColumnoptixRtnIFPortRadioIfMode | read-write | current | Indicates whether an IF port is enabled with AM. When the parameter is set to enabled, the radio link uses the corresponding modulation scheme according to the… |
| 1.3.6.1.2.1.10.4.40.3.10.50 | TableoptixRtnIFPortCurrCapacityTable | not-accessible | current | Describes the service capacities supported by an IF board in the current modulation mode. |
| 1.3.6.1.2.1.10.4.40.3.10.50.1 | RowoptixRtnIFPortCurrCapacityEntry | not-accessible | current | Indicates the current service capacity entry for an IF port. |
| 1.3.6.1.2.1.10.4.40.3.10.50.1.1 | ColumnoptixRtnIFPortCurrTxMode | read-only | current | Indicates the current modulation mode of the transmit end.Values: 1: QPSK; 2: 16QAM; 3: 32QAM; 4: 64QAM; 5: 128QAM; 6: 256QAM; 7: 512QAM; 8: 1024QAM; 9: QPSKST… |
| 1.3.6.1.2.1.10.4.40.3.10.50.1.2 | ColumnoptixRtnIFPortCurrRxMode | read-only | current | Indicates the current modulation mode of the receive end.Values: 1: QPSK; 2: 16QAM; 3: 32QAM; 4: 64QAM; 5: 128QAM; 6: 256QAM; 7: 512QAM; 8: 1024QAM; 9: QPSKSTR… |
| 1.3.6.1.2.1.10.4.40.3.10.50.1.3 | ColumnoptixRtnIFPortAMGuaranteeRate | read-only | current | Indicates the guaranteed AM service capacity. Unit: Mbit/s |
| 1.3.6.1.2.1.10.4.40.3.10.50.1.4 | ColumnoptixRtnIFPortAMPeakRate | read-only | current | Indicates the full AM service capacity. Unit: Mbit/s |
| 1.3.6.1.2.1.10.4.40.3.10.50.1.5 | ColumnoptixRtnIFPortAMCurrSendRate | read-only | current | Indicates the current transmit service capacity when the AM function is enabled. Unit: Mbit/s |
| 1.3.6.1.2.1.10.4.40.3.10.50.1.6 | ColumnoptixRtnIFPortAMCurrRxRate | read-only | current | Indicates the current receive service capacity when the AM function is enabled. Unit: Mbit/s |
| 1.3.6.1.2.1.10.4.40.3.10.50.1.7 | ColumnoptixRtnIFPortCurrE1Capacity | read-write | current | Indicates the number of E1s currently supported in hybrid mode. |
| 1.3.6.1.2.1.10.4.40.3.10.50.1.8 | ColumnoptixRtnIFPortMaxE1Capacity | read-only | current | Indicates the maximum number of E1s currently supported in hybrid mode. |
| 1.3.6.1.2.1.10.4.40.3.10.50.1.9 | ColumnoptixRtnIFPortAMGuaranteeE1Num | read-write | current | Indicates the number of E1s in guarantee capacity modulation mode when the E1 priority is enabled. |
| 1.3.6.1.2.1.10.4.40.3.10.50.1.10 | ColumnoptixRtnIFPortCurrSTM1Capacity | read-write | current | Indicates the STM-1 capacity currently supported. |
| 1.3.6.1.2.1.10.4.40.3.10.50.1.11 | ColumnoptixRtnIFPortMaxSTM1Capacity | read-only | current | Indicates the maximum STM-1 capacity. |
| 1.3.6.1.2.1.10.4.40.3.10.50.1.14 | ColumnoptixRtnIFPortAMPeakE1Num | read-write | current | Indicates the number of E1s in peak capacity modulation mode when the E1 priority is enabled. |
| 1.3.6.1.2.1.10.4.40.3.10.50.1.15 | ColumnoptixRtnIFPortAMEveryModeE1Num | read-write | current | Indicates the number of E1s in each modulation mode when the E1 priority is enabled. |
| 1.3.6.1.2.1.10.4.40.3.10.57 | TableoptixRtnXPICAMBoostTable | not-accessible | current | Describes configuration parameters for an IF XPIC AMBoost. |
| 1.3.6.1.2.1.10.4.40.3.10.57.1 | RowoptixRtnXPICAMBoostEntry | not-accessible | current | Indicates the parameter entry for an IF XPIC AMBoost. |
| 1.3.6.1.2.1.10.4.40.3.10.57.1.2 | ColumnoptixRtnXPICAMBoostEn | read-write | current | Indicates the XPIC AMBoost enable. |
| 1.3.6.1.2.1.10.4.40.3.10.61 | TableoptixRtnIFPortAllModeCapacityE1NumTable | not-accessible | current | Describes the service capacity supported by an IF board in each mode. |
| 1.3.6.1.2.1.10.4.40.3.10.61.1 | RowoptixRtnIFPortAllModeCapacityE1NumEntry | not-accessible | current | Indicates the query entry for service capacities of an IF port in each mode. |
| 1.3.6.1.2.1.10.4.40.3.10.61.1.1 | ColumnoptixRtnIFPortAcmBandWidth | not-accessible | current | Indicates the channel spacing. |
| 1.3.6.1.2.1.10.4.40.3.10.61.1.2 | ColumnoptixRtnIFPortAcmModulationMode | not-accessible | current | Indicates the port modulation mode.Values: 1: QPSK; 2: 16QAM; 3: 32QAM; 4: 64QAM; 5: 128QAM; 6: 256QAM; 7: 512QAM; 8: 1024QAM; 9: QPSKSTRONG; 10: 16QAMSTRONG; … |
| 1.3.6.1.2.1.10.4.40.3.10.61.1.3 | ColumnoptixRtnIFPortAcmCapacity | read-only | current | Indicates the service capacity in a mode. Unit: M |
| 1.3.6.1.2.1.10.4.40.3.10.61.1.4 | ColumnoptixRtnIFPortAcmMaxE1Num | read-only | current | Indicates the maximum number of E1s supported by a mode. |
| 1.3.6.1.2.1.10.4.40.3.10.62 | TableoptixRtnIFPortAllModeCapacityExtTable | not-accessible | current | Describes the service capacity supported by an IF board in each mode. |
| 1.3.6.1.2.1.10.4.40.3.10.62.1 | RowoptixRtnIFPortAllModeCapacityExtEntry | not-accessible | current | Indicates the query entry for service capacities of an IF port in each mode. |
| 1.3.6.1.2.1.10.4.40.3.10.62.1.5 | ColumnoptixRtnIFPortAMCapacityExt | read-only | current | Indicates the service capacity in a mode. Unit: M |
| 1.3.6.1.2.1.10.4.40.3.10.71 | TableoptixRtnIFPortAllModeXpicCapacityE1NumTable | not-accessible | current | Describes the service capacity supported by an IF board in each mode when the XPIC function is enabled. |
| 1.3.6.1.2.1.10.4.40.3.10.71.1 | RowoptixRtnIFPortAllModeXpicCapacityE1NumEntry | not-accessible | current | Indicates the query entry for service capacities of an IF port in each mode when the XPIC function is enabled. |
| 1.3.6.1.2.1.10.4.40.3.10.71.1.1 | ColumnoptixRtnIFPortAcmCapacityForXpic | read-only | current | Indicates the service capacity supported by a mode when the XPIC function is enabled. Unit: M |
| 1.3.6.1.2.1.10.4.40.3.10.71.1.2 | ColumnoptixRtnIFPortAcmMaxE1NumForXpic | read-only | current | Indicates the maximum number of E1s supported by a mode when the XPIC function is enabled. |
| 1.3.6.1.2.1.10.4.40.3.10.72 | TableoptixRtnIFPortAllModeXpicCapacityExtTable | not-accessible | current | Describes the service capacity supported by an IF board in each mode when the XPIC function is enabled. |
| 1.3.6.1.2.1.10.4.40.3.10.72.1 | RowoptixRtnIFPortAllModeXpicCapacityExtEntry | not-accessible | current | Indicates the query entry for service capacities of an IF port in each mode when the XPIC function is enabled. |
| 1.3.6.1.2.1.10.4.40.3.10.72.1.1 | ColumnoptixRtnIFPortAmCapacityForXpicExt | read-only | current | Indicates the service capacity supported by a mode when the XPIC function is enabled. Unit: M |
| 1.3.6.1.2.1.10.4.40.3.10.73 | TableoptixRtnIFPortXPICEnableTable | not-accessible | current | Describes the XPIC status. |
| 1.3.6.1.2.1.10.4.40.3.10.73.1 | RowoptixRtnIFPortXPICEnableEntry | not-accessible | current | Indicates the XPIC status of an IF port. |
| 1.3.6.1.2.1.10.4.40.3.10.73.1.1 | ColumnoptixRtnIFPortXPICEnableStatus | read-write | current | Indicates whether an IF port is enabled with XPIC. Only the XPIC IF board supports this parameter. Values: 0: disabled 1: enabled |
| 1.3.6.1.2.1.10.4.40.3.10.80 | TableoptixRtnIFPortAMSwitchTable | not-accessible | current | Describes the ACM switching function at an IF port. |
| 1.3.6.1.2.1.10.4.40.3.10.80.1 | RowoptixRtnIFPortAMSwitchEntry | not-accessible | current | Indicates the ACM switching management entry at an IF port. |
| 1.3.6.1.2.1.10.4.40.3.10.80.1.2 | ColumnoptixRtnIFPortAMSwitchDir | read-write | current | Indicates the ACM switching direction at an IF port.Values:tx(0),rx(1),bi(2) |
| 1.3.6.1.2.1.10.4.40.3.10.80.1.3 | ColumnoptixRtnIFPortAMSwitchMod | read-write | current | Indicates the ACM switching mode at an IF port.Values:modeClear(0),modeQPSK(1),mode16QAM(2),mode32QAM(3),mode64QAM(4),mode128QAM(5),mode256QAM(6),mode512QAM(7)… |
| 1.3.6.1.2.1.10.4.40.3.10.81 | TableoptixRtnAntennaPolarTable | not-accessible | current | Indicates the polarization direction of an antenna |
| 1.3.6.1.2.1.10.4.40.3.10.81.1 | RowoptixRtnAntennaPolarEntry | not-accessible | current | Indicates the polarization direction of an antenna |
| 1.3.6.1.2.1.10.4.40.3.10.81.1.1 | ColumnoptixRtnAntennaPolarOrientation | read-write | current | Indicates the polarization direction. Value: 0-H or 1-V Default: 0 |
| 1.3.6.1.2.1.10.4.40.3.10.82 | TableoptixRtnFoAdjoinNeinfoTable | not-accessible | current | Describes antenna polarization directions. |
| 1.3.6.1.2.1.10.4.40.3.10.82.1 | RowoptixRtnFoAdjoinNeinfoEntry | not-accessible | current | Indicates an antenna polarization direction entry. |
| 1.3.6.1.2.1.10.4.40.3.10.82.1.1 | ColumnoptixRtnFoAdjoinNeighbourNeID | read-only | current | Indicates the ID of the adjacent NE in an XPIC/1+1/PLA group. |
| 1.3.6.1.2.1.10.4.40.3.10.82.1.2 | ColumnoptixRtnFoAdjoinNeighbourNeName | read-only | current | Indicates the neighbor NE name in an XPIC/1+1/PLA group (64 characters). |
| 1.3.6.1.2.1.10.4.40.3.10.82.1.3 | ColumnoptixRtnFoAdjoinNeighbourNeBoardID | read-only | current | Indicates the neighbor NE board ID in an XPIC/1+1/PLA group. |
| 1.3.6.1.2.1.10.4.40.3.10.82.1.4 | ColumnoptixRtnFoAdjoinNeighbourNeBoardType | read-only | current | Indicates the type of a logical board on the neighbor NE in an XPIC/1+1/PLA group.Values: sxa3: 3372, d4d: 4146, dmc4b: 3416, dmc5a: 3415, mxxi4b: 4216, mxxi4:… |
| 1.3.6.1.2.1.10.4.40.3.10.82.1.5 | ColumnoptixRtnFoAdjoinNeighbourNeSubCardID | read-only | current | Indicates the type of a subcard on the neighbor NE in an XPIC/1+1/PLA group. |
| 1.3.6.1.2.1.10.4.40.3.10.82.1.6 | ColumnoptixRtnFoAdjoinNeighbourNePortID | read-only | current | Indicates the ID of a port on the neighbor NE in an XPIC/1+1/PLA group. |
| 1.3.6.1.2.1.10.4.40.3.10.85 | TableoptixRtnIFPort2MWAYTable | not-accessible | current | Describes the status of IFPort 2MWAY. |
| 1.3.6.1.2.1.10.4.40.3.10.85.1 | RowoptixRtnIFPort2MWAYEntry | not-accessible | current | Describes the status of IFPort 2MWAY. |
| 1.3.6.1.2.1.10.4.40.3.10.85.1.1 | ColumnoptixRtnIFPortCfgStgBID | read-write | current | Indicates the BoardID of the clock. |
| 1.3.6.1.2.1.10.4.40.3.10.85.1.2 | ColumnoptixRtnIFPortCfgStgSub | read-write | current | Indicates the SubCardID of the clock. |
| 1.3.6.1.2.1.10.4.40.3.10.85.1.3 | ColumnoptixRtnIFPortCfgStgPid | read-write | current | Indicates the PortID of the clock. |
| 1.3.6.1.2.1.10.4.40.3.10.85.1.4 | ColumnoptixRtnIFPortCfgStgEnable | read-write | current | Indicates the status of IFPort 2MWAY. |
| 1.3.6.1.2.1.10.4.40.3.10.86 | TableoptixRtnIFPortAllCapacityTable | not-accessible | current | Describes the service E1 supported by an IF board in each mode. |
| 1.3.6.1.2.1.10.4.40.3.10.86.1 | RowoptixRtnIFPortAllCapacityEntry | not-accessible | current | Indicates the query entry for service capacities of an IF port in each mode. |
| 1.3.6.1.2.1.10.4.40.3.10.86.1.1 | ColumnoptixRtnIFPortlist | not-accessible | current | Indicates the list. |
| 1.3.6.1.2.1.10.4.40.3.10.86.1.2 | ColumnoptixRtnIFPortAllBandWidth | read-only | current | Indicates the channel spacing.Values: 1: 3.5M 2: 7.0M 3: 14M 4: 28M 5: 40M 6: 56M 7: FCC30M 8: FCC40M 9: FCC50M 10: 250M; 11: 500M; 12:750M; 16: 62P5M; 17:125M… |
| 1.3.6.1.2.1.10.4.40.3.10.86.1.3 | ColumnoptixRtnIFPortAllMode | read-only | current | Indicates the port modulation mode.Values: 1: QPSK; 2: 16QAM; 3: 32QAM; 4: 64QAM; 5: 128QAM; 6: 256QAM; 7: 512QAM; 8: 1024QAM; 9: QPSKSTRONG; 10: 16QAMSTRONG; … |
| 1.3.6.1.2.1.10.4.40.3.10.86.1.4 | ColumnoptixRtnIFPortAllMaxE1Num | read-only | current | Indicates the maximum number of E1s supported by a mode. |
| 1.3.6.1.2.1.10.4.40.3.10.90 | TableoptixRtnIFPortAMSwitchHistoryTable | not-accessible | current | Describes the ACM switching history. |
| 1.3.6.1.2.1.10.4.40.3.10.90.1 | RowoptixRtnIFPortAMSwitchHistoryEntry | not-accessible | current | Indicates an ACM switching history entry. |
| 1.3.6.1.2.1.10.4.40.3.10.90.1.4 | ColumnoptixRtnIFPortAMSwitchEventID | not-accessible | current | Indicates the ACM-switching event ID. |
| 1.3.6.1.2.1.10.4.40.3.10.90.1.5 | ColumnoptixRtnIFPortAMSwitchEventDate | read-only | current | Indicates the ACM switching duration. |
| 1.3.6.1.2.1.10.4.40.3.10.90.1.6 | ColumnoptixRtnIFPortAMSwitchEventValue | read-only | current | Indicates an ACM switching event. |
| 1.3.6.1.2.1.10.4.40.3.10.90.1.7 | ColumnoptixRtnIFPortAMSwitchEventDir | read-only | current | Indicates the ACM switching direction. |
| 1.3.6.1.2.1.10.4.40.3.10.90.1.8 | ColumnoptixRtnIFPortAMSwitchEventPara | read-only | current | Indicates the ACM-switching event parameters.Values:modeClear(0),modeQPSK(1),mode16QAM(2),mode32QAM(3),mode64QAM(4),mode128QAM(5),mode256QAM(6),mode512QAM(7),m… |
| 1.3.6.1.2.1.10.4.40.3.10.90.1.9 | ColumnoptixRtnIFPortAMSwitchEventTimeStamp | read-only | current | Indicates the ACM switching timestamp. |
| 1.3.6.1.2.1.10.4.40.3.10.91 | TableoptixRtnIFPortE1NumTable | not-accessible | current | Describes the number of E1s. |
| 1.3.6.1.2.1.10.4.40.3.10.91.1 | RowoptixRtnIFPortE1NumEntry | not-accessible | current | Indicates the E1 quantity management entry. |
| 1.3.6.1.2.1.10.4.40.3.10.91.1.1 | ColumnoptixRtnIFPortE1Num | read-only | current | Indicates querying the number of E1s. |
| 1.3.6.1.2.1.10.4.40.3.10.92 | TableoptixRtnNeighborNeinfoTable | not-accessible | current | Describes antenna polarization directions. |
| 1.3.6.1.2.1.10.4.40.3.10.92.1 | RowoptixRtnNeighborNeinfoEntry | not-accessible | current | Indicates an antenna polarization direction entry. |
| 1.3.6.1.2.1.10.4.40.3.10.92.1.1 | ColumnoptixRtnNeighbourNeID | read-only | current | Indicates the ID of the adjacent NE in an XPIC/1+1/PLA group. |
| 1.3.6.1.2.1.10.4.40.3.10.92.1.2 | ColumnoptixRtnNeighbourNeName | read-only | current | Indicates the neighbor NE name in an XPIC/1+1/PLA group (64 characters). |
| 1.3.6.1.2.1.10.4.40.3.10.92.1.3 | ColumnoptixRtnNeighbourNeBoardID | read-only | current | Indicates the neighbor NE board ID in an XPIC/1+1/PLA group. |
| 1.3.6.1.2.1.10.4.40.3.10.92.1.4 | ColumnoptixRtnNeighbourNeBoardType | read-only | current | Indicates the type of a logical board on the neighbor NE in an XPIC/1+1/PLA group. |
| 1.3.6.1.2.1.10.4.40.3.10.92.1.5 | ColumnoptixRtnNeighbourNeSubCardID | read-only | current | Indicates the type of a subcard on the neighbor NE in an XPIC/1+1/PLA group. |
| 1.3.6.1.2.1.10.4.40.3.10.92.1.6 | ColumnoptixRtnNeighbourNePortID | read-only | current | Indicates the ID of a port on the neighbor NE in an XPIC/1+1/PLA group. |
| 1.3.6.1.2.1.10.4.40.3.10.93 | TableoptixRtnLicenseTable | not-accessible | current | Describes licenses |
| 1.3.6.1.2.1.10.4.40.3.10.93.1 | RowoptixRtnLicenseEntry | not-accessible | current | Indicates the license entry |
| 1.3.6.1.2.1.10.4.40.3.10.93.1.2 | ColumnoptixRtnLicenseType | read-only | current | Indicates the license file type. 1: AM 2: HBRID 3: TDM 4: 1588v2 5: ATM/IMA 6: RADIO LAG 7: E1 Priority 8: Synchronous Ethernet 9: Air interface compression 10… |
| 1.3.6.1.2.1.10.4.40.3.10.93.1.3 | ColumnoptixRtnLicenseLoadState | read-only | current | Indicates the license loading status. Values: 0: not loaded 1: loaded |
| 1.3.6.1.2.1.10.4.40.3.10.93.1.4 | ColumnoptixRtnLicenseCapacity | read-only | current | Indicates the license capacity value. (The default capacity value is returned when the license is not loaded.) |
| 1.3.6.1.2.1.10.4.40.3.10.93.1.5 | ColumnoptixRtnIFPortLicenseCapacityUnit | read-only | current | Indicates the license capacity unit. The values: 0: Mbps 1: E1 2: STM1 3: Board 4: Port 255: invalid When the license type is AM/E1 Priority/Air interface comp… |
| 1.3.6.1.2.1.10.4.40.3.10.93.1.6 | ColumnoptixRtnIFPortLicenseUsedCapacity | read-only | current | Indicates the used license capacity. |
| 1.3.6.1.2.1.10.4.40.3.10.93.1.7 | ColumnoptixRtnIFPortLicenseUsedCapacityUnit | read-only | current | Indicates the TDM capacity unit. 0: Mbps 1: E1 2: STM1 3: Board 4: Port -1: Invalid |
| 1.3.6.1.2.1.10.4.40.3.10.95 | TableoptixRtnXpicCascadepidTable | not-accessible | current | Indicates the information of XPIC. |
| 1.3.6.1.2.1.10.4.40.3.10.95.1 | RowoptixRtnXpicCascadepidEntry | not-accessible | current | Indicates the information of XPIC. |
| 1.3.6.1.2.1.10.4.40.3.10.95.1.1 | ColumnoptixRtnXpicCascadepid | read-write | current | Indicates the information of XPIC. |
| 1.3.6.1.2.1.10.4.40.3.10.98 | TableoptixRtnLaserTable | not-accessible | current | Indicates the laser status. |
| 1.3.6.1.2.1.10.4.40.3.10.98.1 | RowoptixRtnLaserEntry | not-accessible | current | Indicates the laser status. |
| 1.3.6.1.2.1.10.4.40.3.10.98.1.4 | ColumnoptixRtnlaserstate | read-only | current | Indicates the laser status. |
| 1.3.6.1.2.1.10.4.40.3.10.117 | TableoptixRtnEthRateBymodTable | not-accessible | current | Indicates the Eth Rate Bymod |
| 1.3.6.1.2.1.10.4.40.3.10.117.1 | RowoptixRtnEthRateBymodEntry | not-accessible | current | Indicates the index entry for Eth Rate Bymod. |
| 1.3.6.1.2.1.10.4.40.3.10.117.1.1 | ColumnoptixRtnEthRateBymodBandwidth | read-write | current | Indicates the Eth Rate Bymod Bandwidth. |
| 1.3.6.1.2.1.10.4.40.3.10.117.1.2 | ColumnoptixRtnEthRateBymodAM | read-write | current | Indicates the Eth Rate Bymod AM. |
| 1.3.6.1.2.1.10.4.40.3.10.117.1.3 | ColumnoptixRtnEthRateBymodE1NUM | read-write | current | Indicates the Rate Bymod E1 number. |
| 1.3.6.1.2.1.10.4.40.3.10.117.1.4 | ColumnoptixRtnEthRate | read-only | current | Indicates the Eth Rate. |
| 1.3.6.1.2.1.10.4.40.3.10.119 | TableoptixRtnHybridCapacityTable | not-accessible | current | Indicates the Hybrid Capacity value |
| 1.3.6.1.2.1.10.4.40.3.10.119.1 | RowoptixRtnHybridCapacityEntry | not-accessible | current | Indicates the index entry. |
| 1.3.6.1.2.1.10.4.40.3.10.119.1.5 | ColumnoptixRtnHybridE1Capacity | read-only | current | Hybrid E1-Capacity. |
| 1.3.6.1.2.1.10.4.40.3.10.119.1.6 | ColumnoptixRtnHybridETHCapacity | read-only | current | Hybrid ETH-Capacity. |
| 1.3.6.1.2.1.10.4.40.3.10.119.1.7 | ColumnoptixRtnHybridPKTLength | read-only | current | Hybrid PKT-Length. |
| 1.3.6.1.2.1.10.4.40.3.10.119.1.8 | ColumnoptixRtnHybridPKTThroughput | read-only | current | Hybrid PKT-Throughput. |
| 1.3.6.1.2.1.10.4.40.3.10.120 | TableoptixRtnLinkDelayStateTable | not-accessible | current | Indicates the LinkDelay Status Table. |
| 1.3.6.1.2.1.10.4.40.3.10.120.1 | RowoptixRtnLinkDelayStateEntry | not-accessible | current | Indicates the LinkDelay Status Entry. |
| 1.3.6.1.2.1.10.4.40.3.10.120.1.4 | ColumnoptixRtnLinkDelayStateSwitch | read-write | current | The delay state. |
| 1.3.6.1.2.1.10.4.40.3.10.130 | TableoptixRtnLpAlm2AisTable | not-accessible | current | Indicates the Alm Status Table |
| 1.3.6.1.2.1.10.4.40.3.10.130.1 | RowoptixRtnLpAlm2AisEntry | not-accessible | current | Indicates the Alm Status Entry |
| 1.3.6.1.2.1.10.4.40.3.10.130.1.6 | ColumnoptixRtnLpAlm2AisSwitch | read-write | current | Alm Status |
| 1.3.6.1.2.1.10.4.40.3.11 | NodeoptixRtnFMTxPower | |||
| 1.3.6.1.2.1.10.4.40.3.11.2 | TableoptixRtnFMTestMSETable | not-accessible | current | Indicates the MSE value table in the fade margin test. |
| 1.3.6.1.2.1.10.4.40.3.11.2.1 | RowoptixRtnFMTestMSEEntry | not-accessible | current | Indicates the MSE value entry in the fade margin test. |
| 1.3.6.1.2.1.10.4.40.3.11.2.1.1 | ColumnoptixRtnFadeMarginAcmMSE | read-only | current | Indicates the MSE value in the unit of 0.1 dB.The value 0xffff indicates a link interruption. |
| 1.3.6.1.2.1.10.4.40.3.11.3 | TableoptixRtnFMValueTable | not-accessible | current | Indicates the fade margin value. |
| 1.3.6.1.2.1.10.4.40.3.11.3.1 | RowoptixRtnFMValueEntry | not-accessible | current | Indicates the fade margin value. |
| 1.3.6.1.2.1.10.4.40.3.11.3.1.1 | ColumnoptixRtnFadeMarginExtRsl0 | read-write | current | Indicates the initial receive power. |
| 1.3.6.1.2.1.10.4.40.3.11.3.1.2 | ColumnoptixRtnFadeMarginExtRslc | read-write | current | Indicates the receive power when the ODU is muted. |
| 1.3.6.1.2.1.10.4.40.3.11.3.1.3 | ColumnoptixRtnFadeMarginExtValue | read-write | current | Indicates the fade margin value. |
| 1.3.6.1.2.1.10.4.40.3.11.3.1.4 | ColumnoptixRtnFadeMarginMode | read-write | current | Indicates the mode. |
| 1.3.6.1.2.1.10.4.40.3.11.3.1.5 | ColumnoptixRtnFadeMarginCurRsl | read-write | current | Indicates the current RSL. |
| 1.3.6.1.2.1.10.4.40.3.11.3.1.6 | ColumnoptixRtnFadeMarginData | read-write | current | Indicates the number of sampling points and the RSL and MSE groups. |
| 1.3.6.1.2.1.10.4.40.3.11.3.1.7 | ColumnoptixRtnFadeMarginValue | read-write | current | Indicates the fade margin value. |
| 1.3.6.1.2.1.10.4.40.3.11.5 | TableoptixRtnGatherFMTable | not-accessible | current | Indicates setting the transmit power table of an ODU in the fade margin test. |
| 1.3.6.1.2.1.10.4.40.3.11.5.1 | RowoptixRtnGatherFMEntry | not-accessible | current | Indicates setting the transmit power entry of an ODU in the fade margin test. |
| 1.3.6.1.2.1.10.4.40.3.11.5.1.1 | ColumnoptixRtnStartGatherFm | read-write | current | Start the near-far-end FadeMargin test using the rsl collection. |
| 1.3.6.1.2.1.10.4.40.3.11.5.1.2 | ColumnoptixRtnFmRsl | read-only | current | Query the received power during the fademargin test. |
| 1.3.6.1.2.1.10.4.40.3.11.7 | TableoptixRtnFMTestODUBoardPowerTable | not-accessible | current | Indicates setting the transmit power table of an ODU in the fade margin test. |
| 1.3.6.1.2.1.10.4.40.3.11.7.1 | RowoptixRtnFMTestODUBoardPowerEntry | not-accessible | current | Indicates setting the transmit power entry of an ODU in the fade margin test. |
| 1.3.6.1.2.1.10.4.40.3.11.7.1.1 | ColumnoptixRtnFadeMarginOduBoardTxPower | read-write | current | Indicates the ODU transmit power. The value ranges from -100 to +350 in the unit of 0.1 dBm. |
| 1.3.6.1.2.1.10.4.40.3.11.7.1.2 | ColumnoptixRtnFadeMarginOduBoardWork | read-write | current | Indicates setting the working status of the ODU in the fade margin test. |
| 1.3.6.1.2.1.10.4.40.3.11.8 | TableoptixRtnFMTestODUPortPowerTable | not-accessible | current | Indicates setting the transmit power table of an ODU in the fade margin test.(320/3202f) |
| 1.3.6.1.2.1.10.4.40.3.11.8.1 | RowoptixRtnFMTestODUPortPowerEntry | not-accessible | current | Indicates setting the transmit power entry of an ODU in the fade margin test.(320/3202f) |
| 1.3.6.1.2.1.10.4.40.3.11.8.1.1 | ColumnoptixRtnFadeMarginOduPortTxPower | read-write | current | Indicates the ODU transmit power. The value ranges from -100 to +350 in the unit of 0.1 dBm.(320/3202f) |
| 1.3.6.1.2.1.10.4.40.3.11.8.1.2 | ColumnoptixRtnFadeMarginOduPortWork | read-write | current | Indicates setting the working status of the ODU in the fade margin test.(320/3202f) |
| 1.3.6.1.2.1.10.4.40.3.12 | NodeoptixIFPRBSMgr | |||
| 1.3.6.1.2.1.10.4.40.3.12.1 | TableoptixRtnIFPRBSTestControlTable | not-accessible | current | Indicates the control table for starting or stopping the PRBS test. |
| 1.3.6.1.2.1.10.4.40.3.12.1.1 | RowoptixRtnIFPRBSTestControlEntry | not-accessible | current | Indicates the control entry for starting or stopping the PRBS test. |
| 1.3.6.1.2.1.10.4.40.3.12.1.1.1 | ColumnoptixRtnIFPRBSType | not-accessible | current | Indicates the PRBS test type: 1-E1 2-IF 3-CPRI/OBSAI |
| 1.3.6.1.2.1.10.4.40.3.12.1.1.2 | ColumnoptixRtnIFPRBSPathId | not-accessible | current | Indicates the ID of a path used in the PRBS test. Set the parameter to 0 if this field is not in use (applicable to RTN 310/320/360/380/380H working in Etherne… |
| 1.3.6.1.2.1.10.4.40.3.12.1.1.3 | ColumnoptixRtnIFPRBSDirection | not-accessible | current | Indicates the PRBS test direction. 1-Ingress 2-Egress |
| 1.3.6.1.2.1.10.4.40.3.12.1.1.4 | ColumnoptixRtnIFPRBSAction | read-write | current | Indicates an action in the PRBS test. 0-stop the test 1-start the test |
| 1.3.6.1.2.1.10.4.40.3.12.1.1.5 | ColumnoptixRtnIFPRBSMode | read-write | current | Indicates the PRBS test mode. 1-short_term (short-term test, measured in seconds) 2-long_term (long-term test, measured in 10 minutes) 3-longlong_term (super-l… |
| 1.3.6.1.2.1.10.4.40.3.12.1.1.6 | ColumnoptixRtnIFPRBSTimeSpan | read-write | current | Indicates the PRBS test duration. Value range: 1-255 The test duration is measured in seconds in short-term tests, 10 minutes in long-term tests, and hours in … |
| 1.3.6.1.2.1.10.4.40.3.12.2 | TableoptixRtnIFPRBSTestResultTable | not-accessible | current | Indicates the PRBS test result |
| 1.3.6.1.2.1.10.4.40.3.12.2.1 | RowoptixRtnIFPRBSTestResultEntry | not-accessible | current | Indicates the PRBS test result |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.11 | ColumnoptixRtnIFPrbsMode | read-only | current | Indicates the test type. 1: short-term test 2: long-term test 3: super long-term test |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.12 | ColumnoptixRtnIFPrbsStartTime | read-only | current | Indicates the start time of a test in the format of YYYYMMDDHHMMSS and the time starts from the year 1990. |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.13 | ColumnoptixRtnIFPrbsEndTime | read-only | current | Indicates the end time of a test in the format of YYYYMMDDHHMMSS and the time starts from the year 1990. |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.14 | ColumnoptixRtnIFPrbsProgress | read-only | current | Indicates the test progress. Value range: 1-100. |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.15 | ColumnoptixRtnIFPrbsPeriod | read-only | current | Indicates the test Period. |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.16 | ColumnoptixRtnIFPrbsDataTypeNum | read-only | current | Indicates the number of parameter types N (N >= 1 and currently N = 6). The data types are described as follows: |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.17 | ColumnoptixRtnIFPrbsType1 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.18 | ColumnoptixRtnIFPrbsTestResult1 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.19 | ColumnoptixRtnIFPrbsType2 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.20 | ColumnoptixRtnIFPrbsTestResult2 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.21 | ColumnoptixRtnIFPrbsType3 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.22 | ColumnoptixRtnIFPrbsTestResult3 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.23 | ColumnoptixRtnIFPrbsType4 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.24 | ColumnoptixRtnIFPrbsTestResult4 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.25 | ColumnoptixRtnIFPrbsType5 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.26 | ColumnoptixRtnIFPrbsTestResult5 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.27 | ColumnoptixRtnIFPrbsType6 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.12.2.1.28 | ColumnoptixRtnIFPrbsTestResult6 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.12.3 | TableoptixRtnIFBitTestControlTable | not-accessible | current | Indicates the control table for starting or stopping the bit test. |
| 1.3.6.1.2.1.10.4.40.3.12.3.1 | RowoptixRtnIFBitTestControlEntry | not-accessible | current | Indicates the control entry for starting or stopping the bit test. |
| 1.3.6.1.2.1.10.4.40.3.12.3.1.4 | ColumnoptixRtnIFBitAction | read-write | current | Indicates an action in the bit test. 0-stop the test 1-start the test. |
| 1.3.6.1.2.1.10.4.40.3.12.3.1.5 | ColumnoptixRtnIFBitMode | read-write | current | Indicates the bit test mode. 1-short_term (short-term test, measured in seconds) 2-long_term (long-term test, measured in 10 minutes) 3-longlong_term (super-lo… |
| 1.3.6.1.2.1.10.4.40.3.12.3.1.6 | ColumnoptixRtnIFBitTimeSpan | read-write | current | Indicates the bit test duration. Value range: 1-255 The test duration is measured in seconds in short-term tests, 10 minutes in long-term tests, and hours in s… |
| 1.3.6.1.2.1.10.4.40.3.12.4 | TableoptixRtnIFBitTestResultTable | not-accessible | current | Indicates the bit test result |
| 1.3.6.1.2.1.10.4.40.3.12.4.1 | RowoptixRtnIFBitTestResultEntry | not-accessible | current | Indicates the bit test result |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.4 | ColumnoptixRtnIFBitResultMode | read-only | current | Indicates the test type. 1: short-term test 2: long-term test 3: super long-term test |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.5 | ColumnoptixRtnIFBitResultStartTime | read-only | current | Indicates the start time of a test in the format of YYYYMMDDHHMMSS and the time starts from the year 1990. |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.6 | ColumnoptixRtnIFBitResultEndTime | read-only | current | Indicates the end time of a test in the format of YYYYMMDDHHMMSS and the time starts from the year 1990. |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.7 | ColumnoptixRtnIFBitResultProgress | read-only | current | Indicates the test progress. Value range: 1-100 |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.8 | ColumnoptixRtnIFBitResultRealTestPeriod | read-only | current | Indicates the real test period of test .Value range: 1-255. |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.9 | ColumnoptixRtnIFBitResultDataTypeNum | read-only | current | Indicates the number of parameter types N (N >= 1 and currently N = 6; 360:N >= 1 and currently N = 2). The data types are described as follows: |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.10 | ColumnoptixRtnIFBitResultType1 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.11 | ColumnoptixRtnIFBitResultTestResult1 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.12 | ColumnoptixRtnIFBitResultType2 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.13 | ColumnoptixRtnIFBitResultTestResult2 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.14 | ColumnoptixRtnIFBitResultType3 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.15 | ColumnoptixRtnIFBitResultTestResult3 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.16 | ColumnoptixRtnIFBitResultType4 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.17 | ColumnoptixRtnIFBitResultTestResult4 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.18 | ColumnoptixRtnIFBitResultType5 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.19 | ColumnoptixRtnIFBitResultTestResult5 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.20 | ColumnoptixRtnIFBitResultType6 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.12.4.1.21 | ColumnoptixRtnIFBitResultTestResult6 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.12.5 | TableoptixRtnIFBitOldTestControlTable | not-accessible | current | Indicates the control table for starting or stopping the bit test. |
| 1.3.6.1.2.1.10.4.40.3.12.5.1 | RowoptixRtnIFBitOldTestControlEntry | not-accessible | current | Indicates the control entry for starting or stopping the bit test. |
| 1.3.6.1.2.1.10.4.40.3.12.5.1.4 | ColumnoptixRtnOldIFBitAction | read-write | current | Indicates an action in the bit test. 0-stop the test 1-start the test |
| 1.3.6.1.2.1.10.4.40.3.12.5.1.5 | ColumnoptixRtnOldIFBitMode | read-write | current | Indicates the bit test mode. 1-short_term (short-term test, measured in seconds) 2-long_term (long-term test, measured in 10 minutes) 3-longlong_term (super-lo… |
| 1.3.6.1.2.1.10.4.40.3.12.5.1.6 | ColumnoptixRtnOldIFBitTimeSpan | read-write | current | Indicates the bit test duration. Value range: 1-255 The test duration is measured in seconds in short-term tests, 10 minutes in long-term tests, and hours in s… |
| 1.3.6.1.2.1.10.4.40.3.12.6 | TableoptixRtnIFBitOldTestResultTable | not-accessible | current | Indicates the bit test result |
| 1.3.6.1.2.1.10.4.40.3.12.6.1 | RowoptixRtnIFBitOldTestResultEntry | not-accessible | current | Indicates the bit test result |
| 1.3.6.1.2.1.10.4.40.3.12.6.1.4 | ColumnoptixRtnOldIFBitResultMode | read-only | current | Indicates the test type. 1: short-term test 2: long-term test 3: super long-term test |
| 1.3.6.1.2.1.10.4.40.3.12.6.1.5 | ColumnoptixRtnOldIFBitSTY | read-only | current | Indicates the testing timeyear. |
| 1.3.6.1.2.1.10.4.40.3.12.6.1.6 | ColumnoptixRtnOldIFBitSTMon | read-only | current | Indicates the testing timemonth. |
| 1.3.6.1.2.1.10.4.40.3.12.6.1.7 | ColumnoptixRtnOldIFBitSTD | read-only | current | Indicates the testing timeday. |
| 1.3.6.1.2.1.10.4.40.3.12.6.1.8 | ColumnoptixRtnOldIFBitSTH | read-only | current | Indicates the testing timehour. |
| 1.3.6.1.2.1.10.4.40.3.12.6.1.9 | ColumnoptixRtnOldIFBitSTMin | read-only | current | Indicates the testing timeminute. |
| 1.3.6.1.2.1.10.4.40.3.12.6.1.10 | ColumnoptixRtnOldIFBitSTS | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.12.6.1.11 | ColumnoptixRtnOldIFBitPeriodNum | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.12.6.1.12 | ColumnoptixRtnOldIFBitSerialNo | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.12.6.1.13 | ColumnoptixRtnOldIFBitErrNum | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.13 | NodeoptixE1PRBSMgr | |||
| 1.3.6.1.2.1.10.4.40.3.13.1 | TableoptixRtnE1PRBSControlTable | not-accessible | current | Indicates the control table for starting or stopping the PRBS test. |
| 1.3.6.1.2.1.10.4.40.3.13.1.1 | RowoptixRtnE1PRBSControlEntry | not-accessible | current | Indicates the control entry for starting or stopping the PRBS test. |
| 1.3.6.1.2.1.10.4.40.3.13.1.1.2 | ColumnoptixRtnE1PRBSControlPathId | read-write | current | Indicates the ID of a path used in the PRBS test. Set the parameter to 0 if this field is not in use (applicable to RTN 310/320/360/380/380H working in Etherne… |
| 1.3.6.1.2.1.10.4.40.3.13.1.1.3 | ColumnoptixRtnE1PRBSControlDirection | read-write | current | Indicates the PRBS test direction. 1-Ingress 2-Egress |
| 1.3.6.1.2.1.10.4.40.3.13.1.1.4 | ColumnoptixRtnE1PRBSAction | read-write | current | Indicates an action in the PRBS test. 0-stop the test 1-start the test |
| 1.3.6.1.2.1.10.4.40.3.13.1.1.5 | ColumnoptixRtnE1PRBSControlMode | read-write | current | Indicates the PRBS test mode. 1-short_term (short-term test, measured in seconds) 2-long_term (long-term test, measured in 10 minutes) 3-superlong_term (super-… |
| 1.3.6.1.2.1.10.4.40.3.13.1.1.6 | ColumnoptixRtnE1PRBSTimeSpan | read-write | current | Indicates the PRBS test duration. Value range: 1-255 The test duration is measured in seconds in short-term tests, 10 minutes in long-term tests, and hours in … |
| 1.3.6.1.2.1.10.4.40.3.13.2 | TableoptixRtnE1PRBSResultTable | not-accessible | current | Indicates the PRBS test result |
| 1.3.6.1.2.1.10.4.40.3.13.2.1 | RowoptixRtnE1PRBSResultEntry | not-accessible | current | Indicates the PRBS test result |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.1 | ColumnoptixRtnE1PRBSPathId | read-only | current | Indicates the path ID. Set the parameter to 0 if this field is not in use. |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.2 | ColumnoptixRtnE1PRBSDirection | read-only | current | Indicates the test direction: 1-Ingress 2-Egress |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.3 | ColumnoptixRtnE1PRBSMode | read-only | current | Indicates the test type. 1: short-term test 2: long-term test 3: super long-term test |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.4 | ColumnoptixRtnE1PRBSStartTime | read-only | current | Indicates the start time of a test in the format of YYYYMMDDHHMMSS and the time starts from the year 1990. |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.5 | ColumnoptixRtnE1PRBSEndTime | read-only | current | Indicates the end time of a test in the format of YYYYMMDDHHMMSS and the time starts from the year 1990. |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.6 | ColumnoptixRtnE1PRBSProgress | read-only | current | Indicates the test progress. Value range: 1-100 |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.7 | ColumnoptixRtnE1PRBSRealTestPeriod | read-only | current | Indicates the real test period of test .Value range: 1-255. |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.8 | ColumnoptixRtnE1PRBSDataTypeNum | read-only | current | Indicates the number of parameter types N (N >= 1 and currently N = 6). The data types are described as follows: |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.9 | ColumnoptixRtnE1PRBSType1 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.10 | ColumnoptixRtnE1PRBSTestResult1 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.11 | ColumnoptixRtnE1PRBSType2 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.12 | ColumnoptixRtnE1PRBSTestResult2 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.13 | ColumnoptixRtnE1PRBSType3 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.14 | ColumnoptixRtnE1PRBSTestResult3 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.15 | ColumnoptixRtnE1PRBSType4 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.16 | ColumnoptixRtnE1PRBSTestResult4 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.17 | ColumnoptixRtnE1PRBSType5 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.18 | ColumnoptixRtnE1PRBSTestResult5 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.19 | ColumnoptixRtnE1PRBSType6 | read-only | current | The data types are as follows: 1: number of bit errors 2: BER (calculated based on the number of bit errors) 3: errored second 4: severely errored second 5: un… |
| 1.3.6.1.2.1.10.4.40.3.13.2.1.20 | ColumnoptixRtnE1PRBSTestResult6 | read-only | current | Indicates the statistics. Each 5-byte string represents the accumulative value for a certain type of statistics data. The first byte indicates the data type an… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| OPTIXRtnBandWidthType | INTEGER { bw3P5M(1), bw7M(2), bw14M(3), bw28M(4), bw40M(5), bw56M(6), bwFCC30M(7), bwFCC40M(8), bwFCC50M(9), bw250M(10), bw500M(11), bw750M(12), bw62P5M(16), bw125M(17), bw1000M(18), bw200M(22), bw112M(23), bwFCC10M(24), bwFCC20M(25), bw1500M(26), bw2000M(27), bwFCC60M(28), bw14MACCP(30), bw28MACCP(31), bw56MACCP(32), bw112MACCP(33), bw80M(34) } | current | Describes the channel spacing supported by an IF board. Values: 1: 3.5M 2: 7.0M 3: 14M 4: 28M 5: 40M 6: 56M 7: FCC30M 8: FCC40M 9: FCC50M 10: 250M; 11: 500M; 12:750M; 16: 62P5M; 17:125M; 18: bw1000M; 22:bw200M; 23:112M;… |
| OPTIXRtnBoardType | INTEGER { shxa2(2454), shuf3(2484), v1shua2(3343), mxuf4(3344), sxa3(3372), dmc5a(3415), dmc4b(3416), mxui5(3442), sld3isv3(3062), isu3(2474), sl91isv3(2468), mxxi5(3549), mxxi4b(4216), mxxi4(4192), dmd4d(4146), mxug4(4125), cshp(3058) } | current | Describes the board type of peer NE. shxa2: 2454, shuf3: 2484, v1shua2: 3343, mxuf4: 3344, sxa3: 3372, dmc5a: 3415, dmc4b: 3416, mxui5: 3442, isv3: 3062, isu3: 2474, isv3: 2468, mxii5: 3549, mxxi4b: 4216, mxxi4: 4192, d… |
| OPTIXRtnE1AisToTuAisEnableType | INTEGER { disable(0), enable(1), auto(2) } | current | Indicates whether the E1_AIS is inserted to the TU_AIS. The value can be 0 (disabled), 1 (enabled), or 2 (automatic). |
| OPTIXRtnIFAcmDirType | INTEGER { tx(0), rx(1), bi(2) } | current | Indicates the ACM direction |
| OPTIXRtnIFAcmModType | INTEGER { modeClear(0), modeQPSK(1), mode16QAM(2), mode32QAM(3), mode64QAM(4), mode128QAM(5), mode256QAM(6), mode512QAM(7), mode1024QAM(8), modeQPSKSTRONG(9), mode16QAMSTRONG(10), mode512QAMLIGHT(11), mode1024QAMLIGHT(12), mode2048QAM(13), modeQPSKStrong250M(14), modeQPSKStrong500M(15), modeQPSKStrong750M(16), modeQPSKStrong62P5M(17), modeQPSKStrong125M(18), mode4096QAM(20), modeBPSK(21), modeBPSK250M(22), modeBPSK500M(23), modeBPSK750M(24), modeBPSK1000M(25), modeBPSK1500M(26), modeBPSK2000M(27), mode2048QAMLIGHT(28), modeBPSK62P5M(29), modeBPSK125M(30), mode8PSK(31), mode8192QAM(32), modeNULL(255) } | current | Indicates the ACM mod.Values:modeClear(0),modeQPSK(1),mode16QAM(2),mode32QAM(3),mode64QAM(4),mode128QAM(5),mode256QAM(6),mode512QAM(7),mode1024QAM(8),modeQPSKSTRONG(9),mode16QAMSTRONG(10), mode512QAMLIGHT(11),mode1024QA… |
| OPTIXRtnIFLoopMode | INTEGER { inloop(1), noloop(0), outloop(2) } | current | Indicates the modem loop mode .it has three mode type : noloop and inloop,outloop |
| OPTIXRtnIFServiceType | INTEGER { e1AndEth(1), sdhAndEth(2), sdh(3) } | current | Indicates the IF service mode. The values: 1: Hybrid (Native E1+ETH), indicating that the IF port carries hybrid services that integrate the Native E1 and Ethernet services. 2: Hybrid (Native STM-1+ETH), indicating that… |
| OPTIXRtnModulateModeType | INTEGER { modeQPSK(1), mode16QAM(2), mode32QAM(3), mode64QAM(4), mode128QAM(5), mode256QAM(6), mode512QAM(7), mode1024QAM(8), modeQPSKSTRONG(9), mode16QAMSTRONG(10), mode512QAMLIGHT(11), mode1024QAMLIGHT(12), mode2048QAM(13), modeQPSKStrong250M(14), modeQPSKStrong500M(15), modeQPSKStrong750M(16), modeQPSKStrong62P5M(17), modeQPSKStrong125M(18), mode4096QAM(20), modeBPSK(21), modeBPSK250M(22), modeBPSK500M(23), modeBPSK750M(24), modeBPSK1000M(25), modeBPSK1500M(26), modeBPSK2000M(27), mode2048QAMLIGHT(28), modeBPSK62P5M(29), modeBPSK125M(30), mode8PSK(31), mode8192QAM(32), mode16384QAM(33), modeNULL(-1) } | current | Describes the modulation mode supported by an IF board. Values: 1: QPSK; 2: 16QAM; 3: 32QAM; 4: 64QAM; 5: 128QAM; 6: 256QAM; 7: 512QAM; 8: 1024QAM; 9: QPSKSTRONG; 10: 16QAMSTRONG; 11: 512QAMLIGHT; 12: 1024QAMLIGHT; 13: … |
| OPTIXRtnRunModeType | INTEGER { is2(0), is3(1), accp(2), nonaccp(3), is6(4), shaccp(5), is6-plus(6), eband-common(7), eband-enhanced(8), is8(9), eband-light(12), is8-plus(13), lh-accp-plus(15) } | current | Running mode supported by the IF port. Its value is 0-IS2, 1-IS3, 2-ACCP, 3-NONACCP, 4-IS6, 5-shaccp, 6-is6-plus, 7-eband-common, 8-eband-enhanced, 9-is8, 12-eband-light, 13-is8-plus 15-lh-accp-plus. |