OPTIX-RTN-MIMO-MGR-MIB
108 objects
This module is used to configure and query IF board related parameters required in radio link configuration and preventive maintenance, including the IF board modulation mode, bandwidth, AM management, and link identifier.
Imported Objects
| OPTIX-OID-MIB | optixProvisionRtn |
| OPTIX-RTN-GENNERAL-MIB | OPTIXRtnEnableStateType optixRtnIndex1 optixRtnIndex2 optixRtnIndex3 optixRtnIndex4 optixRtnMimoBid optixRtnMimoPortid optixRtnMimoSubid |
| OPTIX-RTN-ODU-MGR-MIB | optixRtnOduIndex1 optixRtnOduIndex2 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.40.6 | IdentityoptixRtnMimoParaMgr | This module is used to configure and query IF board related parameters required in radio link configuration and preventive maintenance, including the IF board … | ||
| 1.3.6.1.2.1.10.4.40.6.10 | NodeoptixRtnMimoPara | |||
| 1.3.6.1.2.1.10.4.40.6.10.240 | TableoptixRtnMimo4P4GroupTable | not-accessible | current | Indicates the MIMO work group |
| 1.3.6.1.2.1.10.4.40.6.10.240.1 | RowoptixRtnMimo4P4GroupEntry | not-accessible | current | Indicates the MIMO work group |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.1 | ColumnoptixRtnGroupID | not-accessible | current | Indicates the MIMO work group ID. |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.2 | ColumnoptixRtnGroupType | read-create | current | Indicates the MIMO work group type |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.3 | ColumnoptixRtnNePos4P1 | read-create | current | Indicates the local or peer end. 1: local 2: neighbour |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.4 | ColumnoptixRtnBoardID4P1 | read-create | current | Indicates the slot ID. |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.5 | ColumnoptixRtnSubCardID4P1 | read-create | current | Indicates the subboard ID. |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.6 | ColumnoptixRtnPortID4P1 | read-create | current | Indicates the port ID. |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.7 | ColumnoptixRtnPolar4P1 | read-create | current | Indicates the polarization direction. 1: h1 2: v1 3: h2 4: v2 |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.8 | ColumnoptixRtnNePos4P2 | read-create | current | Indicates the local or peer end. 1: local 2: neighbour |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.9 | ColumnoptixRtnBoardID4P2 | read-create | current | Indicates the slot ID. |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.10 | ColumnoptixRtnSubCardID4P2 | read-create | current | Indicates the subboard ID. |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.11 | ColumnoptixRtnPortID4P2 | read-create | current | Indicates the port ID. |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.12 | ColumnoptixRtnPolar4P2 | read-create | current | Indicates the polarization direction. 1: h1 2: v1 3: h2 4: v2 |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.13 | ColumnoptixRtnNePos4P3 | read-create | current | Indicates the local or peer end. 1: local 2: neighbour |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.14 | ColumnoptixRtnBoardID4P3 | read-create | current | Indicates the slot ID. |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.15 | ColumnoptixRtnSubCardID4P3 | read-create | current | Indicates the subboard ID. |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.16 | ColumnoptixRtnPortID4P3 | read-create | current | Indicates the port ID. |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.17 | ColumnoptixRtnPolar4P3 | read-create | current | Indicates the polarization direction. 1: h1 2: v1 3: h2 4: v2 |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.18 | ColumnoptixRtnNePos4P4 | read-create | current | Indicates the local or peer end. 1: local 2: neighbour |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.19 | ColumnoptixRtnBoardID4P4 | read-create | current | Indicates the slot ID. |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.20 | ColumnoptixRtnSubCardID4P4 | read-create | current | Indicates the subboard ID. |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.21 | ColumnoptixRtnPortID4P4 | read-create | current | Indicates the port ID. |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.22 | ColumnoptixRtnPolar4P4 | read-create | current | Indicates the polarization direction. 1: h1 2: v1 3: h2 4: v2 |
| 1.3.6.1.2.1.10.4.40.6.10.240.1.23 | ColumnoptixRtnMimoIfDelAdjNePg | read-create | current | Indicates whether to delete configurations of the adjacent NE. 0: false 1: true |
| 1.3.6.1.2.1.10.4.40.6.10.250 | TableoptixRtnMimo2P2GroupTable | not-accessible | current | Indicates the MIMO work group |
| 1.3.6.1.2.1.10.4.40.6.10.250.1 | RowoptixRtnMimo2P2GroupEntry | not-accessible | current | Indicates the MIMO work group |
| 1.3.6.1.2.1.10.4.40.6.10.250.1.1 | ColumnoptixRtn2P2GroupID | not-accessible | current | Indicates the MIMO work group ID. |
| 1.3.6.1.2.1.10.4.40.6.10.250.1.2 | ColumnoptixRtn2P2GroupType | read-create | current | Indicates the MIMO work group type |
| 1.3.6.1.2.1.10.4.40.6.10.250.1.3 | ColumnoptixRtnNePos2P1 | read-create | current | Indicates the local or peer end. 1: local 2: neighbour |
| 1.3.6.1.2.1.10.4.40.6.10.250.1.4 | ColumnoptixRtnBoardID2P1 | read-create | current | Indicates the slot ID. |
| 1.3.6.1.2.1.10.4.40.6.10.250.1.5 | ColumnoptixRtnSubCardID2P1 | read-create | current | Indicates the subboard ID. |
| 1.3.6.1.2.1.10.4.40.6.10.250.1.6 | ColumnoptixRtnPortID2P1 | read-create | current | Indicates the port ID. |
| 1.3.6.1.2.1.10.4.40.6.10.250.1.7 | ColumnoptixRtnPolar2P1 | read-create | current | Indicates the polarization direction. 1: h1 2: v1 3: h2 4: v2 |
| 1.3.6.1.2.1.10.4.40.6.10.250.1.8 | ColumnoptixRtnNePos2P2 | read-create | current | Indicates the local or peer end. 1: local 2: neighbour |
| 1.3.6.1.2.1.10.4.40.6.10.250.1.9 | ColumnoptixRtnBoardID2P2 | read-create | current | Indicates the slot ID. |
| 1.3.6.1.2.1.10.4.40.6.10.250.1.10 | ColumnoptixRtnSubCardID2P2 | read-create | current | Indicates the subboard ID. |
| 1.3.6.1.2.1.10.4.40.6.10.250.1.11 | ColumnoptixRtnPortID2P2 | read-create | current | Indicates the port ID. |
| 1.3.6.1.2.1.10.4.40.6.10.250.1.12 | ColumnoptixRtnPolar2P2 | read-create | current | Indicates the polarization direction. 1: h1 2: v1 3: h2 4: v2 |
| 1.3.6.1.2.1.10.4.40.6.10.250.1.13 | ColumnoptixRtnIfDelAdjNePg | read-create | current | Indicates whether to delete configurations of the adjacent NE. 0: false 1: true |
| 1.3.6.1.2.1.10.4.40.6.10.260 | TableoptixRtnMimoOduTable | not-accessible | current | Indicates the configuration for ODUs in a MIMO work group |
| 1.3.6.1.2.1.10.4.40.6.10.260.1 | RowoptixRtnMimoOduEntry | not-accessible | current | Indicates the configuration for ODUs in a MIMO work group |
| 1.3.6.1.2.1.10.4.40.6.10.260.1.1 | ColumnoptixRtnMimoGroupNum | not-accessible | current | Indicates the MIMO work group ID. |
| 1.3.6.1.2.1.10.4.40.6.10.260.1.2 | ColumnoptixRtnMimoOduMaxTSL | read-create | current | Indicates the maximum transmit power of an ODU. |
| 1.3.6.1.2.1.10.4.40.6.10.260.1.3 | ColumnoptixRtnMimoOduTxFreq | read-create | current | Indicates the transmit frequency in the unit of KHz. |
| 1.3.6.1.2.1.10.4.40.6.10.260.1.4 | ColumnoptixRtnMimoOduTxPower | read-create | current | Indicates the transmit power of the ODU. |
| 1.3.6.1.2.1.10.4.40.6.10.260.1.5 | ColumnoptixRtnMimoOduWorkState | read-create | current | Indicates whether the ODU is muted or unmated. |
| 1.3.6.1.2.1.10.4.40.6.10.260.1.6 | ColumnoptixRtnMimoOduTRSpacing | read-create | current | Indicates the T/R spacing for the ODU. |
| 1.3.6.1.2.1.10.4.40.6.10.270 | TableoptixRtnMimoIfAtribTable | not-accessible | current | Indicates the configuration for a MIMO work group |
| 1.3.6.1.2.1.10.4.40.6.10.270.1 | RowoptixRtnMimoIfAtribEntry | not-accessible | current | Indicates the configuration for a MIMO work group |
| 1.3.6.1.2.1.10.4.40.6.10.270.1.1 | ColumnoptixRtnMimoGPIndex | not-accessible | current | Indicates the MIMO work group ID. |
| 1.3.6.1.2.1.10.4.40.6.10.270.1.2 | ColumnoptixRtnMimoBandWidth | read-create | current | Indicates the channel bandwidth. |
| 1.3.6.1.2.1.10.4.40.6.10.270.1.3 | ColumnoptixRtnMimoAcmEn | read-create | current | Indicates whether the ACM function is enabled. 0: disable 1: enable default:enable |
| 1.3.6.1.2.1.10.4.40.6.10.270.1.4 | ColumnoptixRtnMimoBottomMod | read-create | current | Indicates the guaranteed-capacity mode. |
| 1.3.6.1.2.1.10.4.40.6.10.270.1.5 | ColumnoptixRtnMimoPeakMod | read-create | current | Indicates the full-capacity mode. |
| 1.3.6.1.2.1.10.4.40.6.10.270.1.6 | ColumnoptixRtnMimoManualMod | read-create | current | Indicate the manually-specified-capacity mode. |
| 1.3.6.1.2.1.10.4.40.6.10.270.1.7 | ColumnoptixRtnMimoAtpcEn | read-create | current | Indicates whether the ATPC function is enabled in a MIMO work group. 0: Disable 1: Enable |
| 1.3.6.1.2.1.10.4.40.6.10.290 | TableoptixRtnMimoXPITable | not-accessible | current | Indicates to query the XPI value |
| 1.3.6.1.2.1.10.4.40.6.10.290.1 | RowoptixRtnMimoXPIEntry | not-accessible | current | Indicates to query the XPI value |
| 1.3.6.1.2.1.10.4.40.6.10.290.1.1 | ColumnoptixRtnXPIBoardID | read-write | current | Indicates the slot ID. |
| 1.3.6.1.2.1.10.4.40.6.10.290.1.2 | ColumnoptixRtnOffsideNeID | read-write | current | Indicates the peer NE ID. |
| 1.3.6.1.2.1.10.4.40.6.10.290.1.3 | ColumnoptixRtnOffsideNeBid | read-write | current | Indicates the slot ID of a board on the peer NE. |
| 1.3.6.1.2.1.10.4.40.6.10.290.1.4 | ColumnoptixRtnXPIValue | read-only | current | Indicates the XPI value |
| 1.3.6.1.2.1.10.4.40.6.10.300 | TableoptixRtnMimo2P2SyncCfgTable | not-accessible | current | Indicates to synchronize MIMO configurations of the local NE to the adjacent NE |
| 1.3.6.1.2.1.10.4.40.6.10.300.1 | RowoptixRtnMimo2P2SyncCfgEntry | not-accessible | current | Indicates to synchronize MIMO configurations of the local NE to the adjacent NE |
| 1.3.6.1.2.1.10.4.40.6.10.300.1.1 | ColumnoptixRtn2P2SyncCfgGroupID | not-accessible | current | Indicates the MIMO work group ID. |
| 1.3.6.1.2.1.10.4.40.6.10.300.1.2 | ColumnoptixRtnSyncCfgBoardID | read-create | current | Indicates the slot ID. |
| 1.3.6.1.2.1.10.4.40.6.10.300.1.3 | ColumnoptixRtnSyncCfgSubCardID | read-create | current | Indicates the subboard ID. |
| 1.3.6.1.2.1.10.4.40.6.10.300.1.4 | ColumnoptixRtnSyncCfgPortID | read-create | current | Indicates the port ID. |
| 1.3.6.1.2.1.10.4.40.6.10.300.1.5 | ColumnoptixRtnSyncCfgPolar | read-create | current | Indicates the polarization direction. 1: h1 2: v1 3: h2 4: v2 |
| 1.3.6.1.2.1.10.4.40.6.10.310 | TableoptixRtnMimo4P4SyncCfgTable | not-accessible | current | Indicates to synchronize MIMO configurations of the local NE to the adjacent NE |
| 1.3.6.1.2.1.10.4.40.6.10.310.1 | RowoptixRtnMimo4P4SyncCfgEntry | not-accessible | current | Indicates to synchronize MIMO configurations of the local NE to the adjacent NE |
| 1.3.6.1.2.1.10.4.40.6.10.310.1.1 | ColumnoptixRtn4P4SyncCfgGroupID | not-accessible | current | Indicates the MIMO work group ID. |
| 1.3.6.1.2.1.10.4.40.6.10.310.1.2 | ColumnoptixRtnSyncCfgBoardID2P1 | read-create | current | Indicates the slot ID. |
| 1.3.6.1.2.1.10.4.40.6.10.310.1.3 | ColumnoptixRtnSyncCfgSubCardID2P1 | read-create | current | Indicates the subboard ID. |
| 1.3.6.1.2.1.10.4.40.6.10.310.1.4 | ColumnoptixRtnSyncCfgPortID2P1 | read-create | current | Indicates the port ID. |
| 1.3.6.1.2.1.10.4.40.6.10.310.1.5 | ColumnoptixRtnSyncCfgPolar2P1 | read-create | current | Indicates the polarization direction. 1: h1 2: v1 3: h2 4: v2 |
| 1.3.6.1.2.1.10.4.40.6.10.310.1.6 | ColumnoptixRtnSyncCfgBoardID2P2 | read-create | current | Indicates the slot ID. |
| 1.3.6.1.2.1.10.4.40.6.10.310.1.7 | ColumnoptixRtnSyncCfgSubCardID2P2 | read-create | current | Indicates the subboard ID. |
| 1.3.6.1.2.1.10.4.40.6.10.310.1.8 | ColumnoptixRtnSyncCfgPortID2P2 | read-create | current | Indicates the port ID. |
| 1.3.6.1.2.1.10.4.40.6.10.310.1.9 | ColumnoptixRtnSyncCfgPolar2P2 | read-create | current | Indicates the polarization direction. 1: h1 2: v1 3: h2 4: v2 |
| 1.3.6.1.2.1.10.4.40.6.10.320 | TableoptixRtnMimoAdjoinNeinfoTable | not-accessible | current | Indicates to query the cascading NEs in a MIMO work group |
| 1.3.6.1.2.1.10.4.40.6.10.320.1 | RowoptixRtnMimoAdjoinNeinfoEntry | not-accessible | current | Indicates to query the cascading NEs in a MIMO work group |
| 1.3.6.1.2.1.10.4.40.6.10.320.1.1 | ColumnoptixRtnMimoNeighbourNeID | read-only | current | Indicates the ID of the adjacent NE |
| 1.3.6.1.2.1.10.4.40.6.10.320.1.2 | ColumnoptixRtnMimoNeighbourNEName | read-only | current | Indicates the name of the adjacent NE |
| 1.3.6.1.2.1.10.4.40.6.10.320.1.3 | ColumnoptixRtnMimoNeighbourNEBoardType | read-only | current | Indicates board type of the adjacent NE |
| 1.3.6.1.2.1.10.4.40.6.10.321 | TableoptixRtnMimoAdjoinExtNeinfoTable | not-accessible | current | Indicates to query the cascading NEs in a MIMO work group |
| 1.3.6.1.2.1.10.4.40.6.10.321.1 | RowoptixRtnMimoAdjoinExtNeinfoEntry | not-accessible | current | Indicates to query the cascading NEs in a MIMO work group |
| 1.3.6.1.2.1.10.4.40.6.10.321.1.1 | ColumnoptixRtnMimoGroupID | not-accessible | current | Indicates the MIMO work group ID. |
| 1.3.6.1.2.1.10.4.40.6.10.321.1.2 | ColumnoptixRtnMimoNeBoardID | read-only | current | Indicates the slot ID of the NE |
| 1.3.6.1.2.1.10.4.40.6.10.321.1.3 | ColumnoptixRtnMimoNeSubCardID | read-only | current | Indicates the subboard ID of the NE |
| 1.3.6.1.2.1.10.4.40.6.10.321.1.4 | ColumnoptixRtnMimoNePortID | read-only | current | Indicates the port ID of the NE |
| 1.3.6.1.2.1.10.4.40.6.10.321.1.5 | ColumnoptixRtnMimoNeighbourNeId | read-only | current | Indicates the ID of the adjacent NE |
| 1.3.6.1.2.1.10.4.40.6.10.321.1.6 | ColumnoptixRtnMimoNeighbourNeName | read-only | current | Indicates the name of the adjacent NE |
| 1.3.6.1.2.1.10.4.40.6.10.321.1.7 | ColumnoptixRtnMimoNeighbourNeBoardType | read-only | current | Indicates board type of the adjacent NE |
| 1.3.6.1.2.1.10.4.40.6.10.321.1.8 | ColumnoptixRtnMimoNeighbourNeADJID | read-only | current | Indicates the mimo ID of the adjacent NE |
| 1.3.6.1.2.1.10.4.40.6.10.321.1.9 | ColumnoptixRtnMimoNeighbourNeBoardID | read-only | current | Indicates the slot ID of the adjacent NE |
| 1.3.6.1.2.1.10.4.40.6.10.321.1.10 | ColumnoptixRtnMimoNeighbourNeSubCardID | read-only | current | Indicates the subboard ID of the adjacent NE |
| 1.3.6.1.2.1.10.4.40.6.10.321.1.11 | ColumnoptixRtnMimoNeighbourNePortID | read-only | current | Indicates the port ID of the adjacent NE |
| 1.3.6.1.2.1.10.4.40.6.10.330 | TableoptixRtnMimoXPIExtTable | not-accessible | current | Indicates to query the XPI value |
| 1.3.6.1.2.1.10.4.40.6.10.330.1 | RowoptixRtnMimoXPIExtEntry | not-accessible | current | Indicates to query the XPI value |
| 1.3.6.1.2.1.10.4.40.6.10.330.1.1 | ColumnoptixRtnXPIExtBoardIDIndex | not-accessible | current | Indicates the slot ID. |
| 1.3.6.1.2.1.10.4.40.6.10.330.1.2 | ColumnoptixRtnXPIValueExt | read-only | current | Indicates the XPI Ext value |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| OPTIXRtnBoardType | INTEGER { shxa2(2454), shuf3(2484), v1shua2(3343), mxuf4(3344), sxa3(3372), dmc5a(3415), dmc4b(3416), mxui5(3442) } | current | Describes the board type of peer NE,shxa2: 2454,shuf3: 2484,v1shua2: 3343,mxuf4: 3344,sxa3: 3372,dmc5a: 3415,dmc4b: 3416,mxui5: 3442 |
| OPTIXRtnMimoBandWidthType | INTEGER { bw28M(4), bw40M(5), bw56M(6), bw28MACCP(31), bw56MACCP(32), } | current | Indicates the IF bandwidth supported by MIMO. |
| OPTIXRtnModulateModeType | INTEGER { modeClear(0), modeQPSK(1), mode16QAM(2), mode32QAM(3), mode64QAM(4), mode128QAM(5), mode256QAM(6), mode512QAM(7), mode1024QAM(8), modeQPSKSTRONG(9), mode16QAMSTRONG(10), mode1024QAMLIGHT(12), mode2048QAM(13), mode4096QAM(20), modeNULL(-1) } | current | Describes the modulation mode supported by an IF board. Values: 1: QPSK 2: 16QAM 3: 32QAM 4: 64QAM 5: 128QAM 6: 256QAM 22: BPSK250M 23: BPSK500M 24: BPSK750M 25: BPSK1000M 26: BPSK1500M 27: BPSK2000M -1: null |