MIB Viewer

PRVT-CFM-MIB

238 objects
Prvt extension of Connectivity Fault Management module for managing IEEE 802.1ag
Imported Objects
IF-MIBInterfaceIndex
PRVT-SWITCH-MIBswitch
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCMacAddress RowStatus TAddress TDomain TEXTUAL-CONVENTION TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.738.10.5.131IdentityprvtCfmMIBPrvt extension of Connectivity Fault Management module for managing IEEE 802.1ag
1.3.6.1.4.1.738.10.5.131.0ScalarAncurrentA value that represents a type (and thereby the format) of a PrvtCfmMaintDomainName. The value can be one of the following: ieeeReserved(0) Reserved for defini…
1.3.6.1.4.1.738.10.5.131.0NodeprvtCfmMIBNotifications
1.3.6.1.4.1.738.10.5.131.0.1NotificationprvtCfm1wJitterThresholdcurrentThis trap should be sent whenever the one way jitter on a CFM test will surpass one of the 2 defined thresholds.
1.3.6.1.4.1.738.10.5.131.0.2NotificationprvtCfmJitterThresholdcurrentThis trap should be sent whenever the two way jitter on a CFM test will surpass one of the 2 defined thresholds.
1.3.6.1.4.1.738.10.5.131.0.3NotificationprvtCfmFrameLossThresholdcurrentThis trap should be sent whenever the frame loss on a CFM test will surpass one of the 2 defined thresholds.
1.3.6.1.4.1.738.10.5.131.0.4NotificationprvtCfmLatencyThresholdcurrentThis trap should be sent whenever the latency on a CFM test will surpass one of the 2 defined thresholds.
1.3.6.1.4.1.738.10.5.131.0.5NotificationprvtCfmUnexpectedPrioritycurrentReferences to in the [G.8021/Y.1341] : Unexpected Priority defect (dUNPr) The Unexpected Priority defect is calculated at the ETH layer. It detects the configu…
1.3.6.1.4.1.738.10.5.131.0.6NotificationprvtCfmFaultAlarmcurrentA MEP has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whe…
1.3.6.1.4.1.738.10.5.131.0.7NotificationprvtCfmAisLckRecievedcurrentA MEP may generate a AIS/LCK notification each time its AIS/LCK condition is activated.
1.3.6.1.4.1.738.10.5.131.0.8NotificationprvtCfmAisLckClearedcurrentThe notification is sent each time AIS/LCK condition is cleared.
1.3.6.1.4.1.738.10.5.131.0.9NotificationprvtCfmFaultAlarmClearedcurrentA MEP's persistent defect condition has cleared. A notification is sent to the management entity with the OID of the MEP that has cleared the fault. The manage…
1.3.6.1.4.1.738.10.5.131.1NodeprvtCfmMIBObjects
1.3.6.1.4.1.738.10.5.131.1.1ScalarprvtCfmUpdateIntervalread-writecurrentTime between monitoring parameters update (in seconds). A value of 0 suspends the monitoring task and a value different from 0 resumes it. Default is 20 second…
1.3.6.1.4.1.738.10.5.131.1.2ScalarprvtCfmShutdownread-writecurrentSet to 'true' to disable CFM, or to 'false', to enable.
1.3.6.1.4.1.738.10.5.131.1.3NodeprvtCfmStack
1.3.6.1.4.1.738.10.5.131.1.3.1TableprvtCfmStackTablenot-accessiblecurrentThere is one CFM Stack table per bridge. It permits the retrieval of information about the Maintenance Points configured on any given interface.
1.3.6.1.4.1.738.10.5.131.1.3.1.1RowprvtCfmStackEntrynot-accessiblecurrentThe Stack table entry
1.3.6.1.4.1.738.10.5.131.1.3.1.1.1ColumnprvtCfmStackInterfaceIndexnot-accessiblecurrentThis object represents the Bridge Port or aggregated port on which MEPs or MHFs might be configured. Upon a restart of the system, the system SHALL, if necessa…
1.3.6.1.4.1.738.10.5.131.1.3.1.1.2ColumnprvtCfmStackServiceIdOrNonenot-accessiblecurrentVLAN ID to which the MP is attached, or 0, if none.
1.3.6.1.4.1.738.10.5.131.1.3.1.1.3ColumnprvtCfmStackMdLevelnot-accessiblecurrentMD Level of the Maintenance Point.
1.3.6.1.4.1.738.10.5.131.1.3.1.1.4ColumnprvtCfmStackDirectionnot-accessiblecurrentDirection in which the MP faces on the Bridge Port
1.3.6.1.4.1.738.10.5.131.1.3.1.1.5ColumnprvtCfmStackMdNameread-onlycurrentThe index of the Maintenance Domain in the prvtCfmMdTable to which the MP is associated, or zero-length, if none.
1.3.6.1.4.1.738.10.5.131.1.3.1.1.6ColumnprvtCfmStackMaNameread-onlycurrentThe index of the MA in the prvtCfmMaTable to which the MP is associated, or zero-length, if none.
1.3.6.1.4.1.738.10.5.131.1.3.1.1.7ColumnprvtCfmStackMepIdread-onlycurrentIf an MEP is configured, the MEPID, else 0
1.3.6.1.4.1.738.10.5.131.1.3.1.1.8ColumnprvtCfmStackMacAddressread-onlycurrentMAC address of the MP.
1.3.6.1.4.1.738.10.5.131.1.4NodeprvtCfmMd
1.3.6.1.4.1.738.10.5.131.1.4.2TableprvtCfmMdTablenot-accessiblecurrentThe Maintenance Domain table. Each row in the table represents a different Maintenance Domain. A Maintenance Domain is described in 802.1ag (3.22) as the netwo…
1.3.6.1.4.1.738.10.5.131.1.4.2.1RowprvtCfmMdEntrynot-accessiblecurrentThe Maintenance Domain table entry. This entry is not lost upon reboot. It is backed up by stable storage.
1.3.6.1.4.1.738.10.5.131.1.4.2.1.1ColumnprvtCfmMdNamenot-accessiblecurrentThe Maintenance Domain name. Each Maintenance Domain has unique name amongst all those used or available to a service provider or operator. It facilitates easy…
1.3.6.1.4.1.738.10.5.131.1.4.2.1.2ColumnprvtCfmMdRowStatusread-createcurrentThe status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
1.3.6.1.4.1.738.10.5.131.1.4.2.1.4ColumnprvtCfmMdLevelread-createcurrentThe Maintenance Domain Level.
1.3.6.1.4.1.738.10.5.131.1.4.2.1.5ColumnprvtCfmMdFormatread-createcurrentThe type (and thereby format) of the Maintenance Domain Name.
1.3.6.1.4.1.738.10.5.131.1.4.2.1.6ColumnprvtCfmMdMhfCreationread-createcurrentEnumerated value indicating whether the management entity can create MHFs (MIP Half Function) for this Maintenance Domain. Since, in this variable, there is no…
1.3.6.1.4.1.738.10.5.131.1.4.2.1.7ColumnprvtCfmMdMhfIdPermissionread-createcurrentEnumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this Maintenance Domain. Since,…
1.3.6.1.4.1.738.10.5.131.1.5NodeprvtCfmMa
1.3.6.1.4.1.738.10.5.131.1.5.1TableprvtCfmMaTablenot-accessiblecurrentThe Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. The writable…
1.3.6.1.4.1.738.10.5.131.1.5.1.1RowprvtCfmMaEntrynot-accessiblecurrentprvtCfmMaEntry
1.3.6.1.4.1.738.10.5.131.1.5.1.1.1ColumnprvtCfmMaNamenot-accessiblecurrentThe Short Maintenance Association name. This name must be unique within a maintenance domain.
1.3.6.1.4.1.738.10.5.131.1.5.1.1.2ColumnprvtCfmMaRowStatusread-createcurrentThe status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
1.3.6.1.4.1.738.10.5.131.1.5.1.1.4ColumnprvtCfmMaServiceIdread-createcurrentThe primary service ID attached to this MA
1.3.6.1.4.1.738.10.5.131.1.5.1.1.5ColumnprvtCfmMaVlanIdread-createcurrentThe primary vlan ID attached to this MA
1.3.6.1.4.1.738.10.5.131.1.5.1.1.6ColumnprvtCfmMaMhfCreationread-createcurrentIndicates if the Management entity can create MHFs (MIP Half Function) for this MA.
1.3.6.1.4.1.738.10.5.131.1.5.1.1.7ColumnprvtCfmMaPermissionread-createcurrentEnumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this MA.
1.3.6.1.4.1.738.10.5.131.1.5.1.1.8ColumnprvtCfmMaFormatread-createcurrentThe type (and thereby format) of the Maintenance Association Name.
1.3.6.1.4.1.738.10.5.131.1.5.1.1.9ColumnprvtCfmMaCcmIntervalread-createcurrentInterval between CCM transmissions to be used by all MEPs in the MA.
1.3.6.1.4.1.738.10.5.131.1.5.1.1.10ColumnprvtCfmMaAisLckReceiveread-createcurrentTurn the AIS & LCK features on/off.
1.3.6.1.4.1.738.10.5.131.1.5.1.1.11ColumnprvtCfmMaAisLckLevelread-createcurrentThe MD level at which AIS & LCK frames will be sent.
1.3.6.1.4.1.738.10.5.131.1.5.1.1.12ColumnprvtCfmMaAisLckIntervalread-createcurrentThe time interval at which AIS and LCK frames will be sent
1.3.6.1.4.1.738.10.5.131.1.5.1.1.13ColumnprvtCfmMaAisLckPriorityread-createcurrentCOS parameter for the outgoing AIS & LCK frames.
1.3.6.1.4.1.738.10.5.131.1.5.1.1.15ColumnprvtCfmMaClearConnectivityread-createcurrentThe ID of the MEP to be cleared from the MEP table, or 0 for all
1.3.6.1.4.1.738.10.5.131.1.6NodeprvtCfmMep
1.3.6.1.4.1.738.10.5.131.1.6.1TableprvtCfmMepTablenot-accessiblecurrentThe Maintenance Association End Point (MEP) table. Each row in the table represents a different MEP. A MEP is an actively managed CFM entity, associated with a…
1.3.6.1.4.1.738.10.5.131.1.6.1.1RowprvtCfmMepEntrynot-accessiblecurrentprvtCfmMepEntry
1.3.6.1.4.1.738.10.5.131.1.6.1.1.1ColumnprvtCfmMepIdentifierread-onlycurrentInteger that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a spec…
1.3.6.1.4.1.738.10.5.131.1.6.1.1.2ColumnprvtCfmMepRowStatusread-createcurrentThe status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.3ColumnprvtCfmMepInterfaceIndexread-createcurrentThis object is the interface index (from ifTable) of either a bridge port, or an aggregated IEEE 802.1 link, to which the MEP is attached.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.4ColumnprvtCfmMepDirectionread-createcurrentThe direction in which the MEP faces on the Bridge port.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.5ColumnprvtCfmMepShutdownread-createcurrentAdministrative state of the MEP The value 'true' will shutdown/disable the MEP. The value 'false' will enable the MEP.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.6ColumnprvtCfmMepFngStateread-onlycurrentCurrent state of the MEP Fault Notification Generator State Machine.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.7ColumnprvtCfmMepCciEnabledread-createcurrentIf set to true, the MEP will generate CCM messages.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.8ColumnprvtCfmMepCcmLtmPriorityread-createcurrentThe priority value for CCMs and LTMs transmitted by the MEP. Default Value is the highest priority value allowed to pass through the bridge port for any of thi…
1.3.6.1.4.1.738.10.5.131.1.6.1.1.9ColumnprvtCfmMepMacAddressread-onlycurrentMAC address of the MEP.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.10ColumnprvtCfmMepLowPrDefread-createcurrentAn integer value specifying the lowest priority defect that is allowed to generate fault alarm.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.11ColumnprvtCfmMepHighestPrDefectread-onlycurrentThe highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_RESET state.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.12ColumnprvtCfmMepDefectsread-onlycurrentA vector of Boolean error conditions from Table 20-1, any of which may be true.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.13ColumnprvtCfmMepErrorCcmLastFailureread-onlycurrentThe last-received CCM that triggered an DefErrorCCM fault.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.14ColumnprvtCfmMepXconCcmLastFailureread-onlycurrentThe last-received CCM that triggered a DefXconCCM fault.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.15ColumnprvtCfmMepCcmSequenceErrorsread-onlycurrentThe total number of out-of-sequence CCMs received from all remote MEPs.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.16ColumnprvtCfmMepCciSentCcmsread-onlycurrentTotal number of Continuity Check messages transmitted.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.17ColumnprvtCfmMepNextLbmTransIdread-onlycurrentNext sequence number/transaction identifier to be sent in a Loopback message. This sequence number can be zero because it wraps around.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.18ColumnprvtCfmMepLbrInread-onlycurrentTotal number of valid, in-order Loopback Replies received.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.19ColumnprvtCfmMepLbrInOutOfOrderread-onlycurrentThe total number of valid, out-of-order Loopback Replies received.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.20ColumnprvtCfmMepLbrBadMsduread-onlycurrentThe total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM (20.2.3).
1.3.6.1.4.1.738.10.5.131.1.6.1.1.21ColumnprvtCfmMepLtmNextSeqNumberread-onlycurrentNext transaction identifier/sequence number to be sent in a Linktrace message. This sequence number can be zero because it wraps around.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.22ColumnprvtCfmMepUnexpLtrInread-onlycurrentThe total number of unexpected LTRs received (20.39.1).
1.3.6.1.4.1.738.10.5.131.1.6.1.1.23ColumnprvtCfmMepLbrOutread-onlycurrentTotal number of Loopback Replies transmitted.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.24ColumnprvtCfmMepTransmitLbmStatusread-createcurrentA Boolean flag set to true by the bridge port to indicate that another LBM may be transmitted. Reset to false by the MEP Loopback Initiator State Machine.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.25ColumnprvtCfmMepTransmitLbmDestMacAddressread-createcurrentThe Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column prvtCfmMepTransmitLbmDe…
1.3.6.1.4.1.738.10.5.131.1.6.1.1.26ColumnprvtCfmMepTransmitLbmDestMepIdread-createcurrentThe Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent. This address will be used i…
1.3.6.1.4.1.738.10.5.131.1.6.1.1.27ColumnprvtCfmMepTransmitLbmDestIsMepIdread-createcurrentTrue indicates that MEPID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used f…
1.3.6.1.4.1.738.10.5.131.1.6.1.1.28ColumnprvtCfmMepTransmitLbmMessagesread-createcurrentThe number of Loopback messages to be transmitted.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.29ColumnprvtCfmMepTransmitLbmDataTlvread-createcurrentAn arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.30ColumnprvtCfmMepTransmitLbmVlanPriorityread-createcurrentPriority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. The default value is CCM priority.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.31ColumnprvtCfmMepTransmitLbmVlanDropEnableread-createcurrentDrop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enable, please check IEEE 802.1ad.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.32ColumnprvtCfmMepTransmitLbmResultOKread-onlycurrentIndicates the result of the operation: - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not be sent.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.33ColumnprvtCfmMepTransmitLbmSeqNumberread-onlycurrentThe Loopback Transaction Identifier (prvtCfmMepNextLbmTransId) of the first LBM (to be) sent. The value returned is undefined if prvtCfmMepTransmitLbmResultOK …
1.3.6.1.4.1.738.10.5.131.1.6.1.1.34ColumnprvtCfmMepTransmitLtmStatusread-createcurrentA Boolean flag set to true by the bridge port to indicate that another LTM may be transmitted. In order to start linktrace following step should be executed: 1…
1.3.6.1.4.1.738.10.5.131.1.6.1.1.35ColumnprvtCfmMepTransmitLtmFlagsread-createcurrentThe flags field for LTMs transmitted by the MEP.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.36ColumnprvtCfmMepTransmitLtmTargetMacAddressread-createcurrentThe Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column prvtCfmMepTransmitLtmTa…
1.3.6.1.4.1.738.10.5.131.1.6.1.1.37ColumnprvtCfmMepTransmitLtmTargetMepIdread-createcurrentAn indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Associ…
1.3.6.1.4.1.738.10.5.131.1.6.1.1.38ColumnprvtCfmMepTransmitLtmTargetIsMepIdread-createcurrentTrue indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used …
1.3.6.1.4.1.738.10.5.131.1.6.1.1.39ColumnprvtCfmMepTransmitLtmTtlread-createcurrentThe LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each Linktrace …
1.3.6.1.4.1.738.10.5.131.1.6.1.1.40ColumnprvtCfmMepTransmitLtmResultread-onlycurrentIndicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent
1.3.6.1.4.1.738.10.5.131.1.6.1.1.41ColumnprvtCfmMepTransmitLtmSeqNumberread-onlycurrentThe LTM Transaction Identifier (prvtCfmMepLtmNextSeqNumber) of the LTM sent. The value returned is undefined if prvtCfmMepTransmitLtmResult is false.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.42ColumnprvtCfmMepTransmitLtmEgressIdentifierread-createcurrentIdentifies the MEP Linktrace Initiator that is originating, or the Linktrace Responder that is forwarding, this LTM. The low-order six octets contain a 48-bit …
1.3.6.1.4.1.738.10.5.131.1.6.1.1.43ColumnprvtCfmMepAlarmSupressedread-onlycurrentA boolean showing if an AIS or LCK packet was received from a lower level
1.3.6.1.4.1.738.10.5.131.1.6.1.1.44ColumnprvtCfmMepAisConditionread-onlycurrentAIS condition Is true by detection of signal fail condition at a Server layer or reception of AIS at a server (sub-) layer MEP [AIS condition/Rec. ITU-T Y.1731…
1.3.6.1.4.1.738.10.5.131.1.6.1.1.45ColumnprvtCfmMepLckConditionread-onlycurrentA boolean showing if the MEP should lock the service towards the client and send LCK packets
1.3.6.1.4.1.738.10.5.131.1.6.1.1.46ColumnprvtCfmMepAisLifetimeread-onlycurrentThe lifetime of the last received AIS packet
1.3.6.1.4.1.738.10.5.131.1.6.1.1.47ColumnprvtCfmMepLckLifetimeread-onlycurrentThe lifetime of the last received LCK packet
1.3.6.1.4.1.738.10.5.131.1.6.1.1.48ColumnprvtCfmMepTransmitMcastLbmread-createcurrentA boolean to control sending Y.1731 multicast loopback.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.49ColumnprvtCfmMepTransmitLbmInfiniteread-createcurrentA boolean to control sending LBMs continuously until the operation is explicitly stopped by setting this back to false
1.3.6.1.4.1.738.10.5.131.1.6.1.1.50ColumnprvtCfmMepTransmitLbmDelayread-createcurrentAn amount of time to wait between sent LBMs (in seconds).
1.3.6.1.4.1.738.10.5.131.1.6.1.1.51ColumnprvtCfmMepTransmitLbmTimeoutread-createcurrentAn amount of time to wait after the last sent LBM if no LBR is received (in seconds).
1.3.6.1.4.1.738.10.5.131.1.6.1.1.52ColumnprvtCfmMepTransmitLtmTimeoutread-createcurrentAn amount of time to wait after the last sent LTM if no LTR is received (in seconds).
1.3.6.1.4.1.738.10.5.131.1.6.1.1.53ColumnprvtCfmMepTransmitLbmSentPktsread-onlycurrentNumber of successfully sent packets in the current LBM session.
1.3.6.1.4.1.738.10.5.131.1.6.1.1.54ColumnprvtCfmMepTransmitLbmSuccessRateread-onlycurrentSuccess rate of the current LBM session (in percentage*100).
1.3.6.1.4.1.738.10.5.131.1.6.1.1.55ColumnprvtCfmMepTransmitLbmMinTimeread-onlycurrentMinimum LBR response time (in msec).
1.3.6.1.4.1.738.10.5.131.1.6.1.1.56ColumnprvtCfmMepTransmitLbmAvgTimeread-onlycurrentAverage LBR response time (in msec).
1.3.6.1.4.1.738.10.5.131.1.6.1.1.57ColumnprvtCfmMepTransmitLbmMaxTimeread-onlycurrentMaximum LBR response time (in msec).
1.3.6.1.4.1.738.10.5.131.1.6.1.1.58ColumnprvtCfmMepFngAlarmTimeread-createcurrentThe time that defects must be present before a Fault Alarm is issued (fngAlarmTime. 20.33.3) (default 2.5s).
1.3.6.1.4.1.738.10.5.131.1.6.1.1.59ColumnprvtCfmMepFngResetTimeread-createcurrentThe time that defects must be absent before re-enabling a Fault Alarm (fngResetTime, 20.33.4) (default 10s).
1.3.6.1.4.1.738.10.5.131.1.6.1.1.60ColumnprvtCfmMepTransmitLbmRemainingMessagesread-onlycurrentThe number of LBMs (Loopback messages) to be transmitted
1.3.6.1.4.1.738.10.5.131.1.6.1.1.61ColumnprvtCfmMepTransmitLbmCurrentStatusread-onlycurrentA Boolean flag set to true by the bridge port to indicate that another LBM may be transmitted. Reset to false by the MEP Loopback Initiator State Machine.
1.3.6.1.4.1.738.10.5.131.1.6.2TableprvtCfmMepDbTablenot-accessiblecurrentThe MEP Database. A database, maintained by every MEP, that maintains received information about other MEPs in the Maintenance Domain. The SMI does not allow t…
1.3.6.1.4.1.738.10.5.131.1.6.2.1RowprvtCfmMepDbEntrynot-accessiblecurrentThe MEP Database table entry.
1.3.6.1.4.1.738.10.5.131.1.6.2.1.1ColumnprvtCfmMepDbRMepIdentifiernot-accessiblecurrentMaintenance association End Point Identifier of a remote MEP whose information from the MEP Database is to be returned.
1.3.6.1.4.1.738.10.5.131.1.6.2.1.2ColumnprvtCfmMepDbRMepStateread-onlycurrentThe operational state of the remote MEP IFF State machines.
1.3.6.1.4.1.738.10.5.131.1.6.2.1.3ColumnprvtCfmMepDbRMepFailedOkTimeread-onlycurrentThe time (SysUpTime) at which the IFF Remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state.
1.3.6.1.4.1.738.10.5.131.1.6.2.1.4ColumnprvtCfmMepDbMacAddressread-onlycurrentThe MAC address of the remote MEP.
1.3.6.1.4.1.738.10.5.131.1.6.2.1.5ColumnprvtCfmMepDbRdiread-onlycurrentState of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received.
1.3.6.1.4.1.738.10.5.131.1.6.2.1.6ColumnprvtCfmMepDbPortStatusTlvread-onlycurrentAn enumerated value of the Port status TLV received in the last CCM from the remote MEP or the default value psNoPortStateTLV indicating either no CCM has been…
1.3.6.1.4.1.738.10.5.131.1.6.2.1.7ColumnprvtCfmMepDbInterfaceStatusTlvread-onlycurrentAn enumerated value of the Interface status TLV received in the last CCM from the remote MEP or the default value isNoInterfaceStatus TLV indicating either no …
1.3.6.1.4.1.738.10.5.131.1.6.2.1.8ColumnprvtCfmMepDbChassisIdSubtyperead-onlycurrentThis object specifies the format of the Chassis ID received in the last CCM.
1.3.6.1.4.1.738.10.5.131.1.6.2.1.9ColumnprvtCfmMepDbChassisIdread-onlycurrentThe Chassis ID. The format of this object is determined by the value of the prvtCfmLtrChassisIdSubtype object.
1.3.6.1.4.1.738.10.5.131.1.6.2.1.10ColumnprvtCfmMepDbManAddressDomainread-onlycurrentThe TDomain that identifies the type and format of the related prvtCfmMepDbManAddress object, used to access the SNMP agent of the system transmitting the CCM.…
1.3.6.1.4.1.738.10.5.131.1.6.2.1.11ColumnprvtCfmMepDbManAddressread-onlycurrentThe TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related o…
1.3.6.1.4.1.738.10.5.131.1.6.3TableprvtCfmLtrTablenot-accessiblecurrentThis table extends the MEP table and contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. SNMP SMI does not allo…
1.3.6.1.4.1.738.10.5.131.1.6.3.1RowprvtCfmLtrEntrynot-accessiblecurrentThe Linktrace Reply table entry.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.1ColumnprvtCfmLtrSeqNumbernot-accessiblecurrentTransaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.2ColumnprvtCfmLtrReceiveOrdernot-accessiblecurrentAn index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. prvtCfmLtrReceiveOrder are assigned sequentially from 1, in t…
1.3.6.1.4.1.738.10.5.131.1.6.3.1.3ColumnprvtCfmLtrTtlread-onlycurrentTTL field value for a returned LTR.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.4ColumnprvtCfmLtrForwardedread-onlycurrentIndicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.5ColumnprvtCfmLtrTerminalMepread-onlycurrentA boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.6ColumnprvtCfmLtrLastEgressIdentifierread-onlycurrentAn octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace…
1.3.6.1.4.1.738.10.5.131.1.6.3.1.7ColumnprvtCfmLtrNextEgressIdentifierread-onlycurrentAn octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Res…
1.3.6.1.4.1.738.10.5.131.1.6.3.1.8ColumnprvtCfmLtrRelayread-onlycurrentValue returned in the Relay Action field.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.9ColumnprvtCfmLtrChassisIdSubtyperead-onlycurrentThis object specifies the format of the Chassis ID returned in the Sender ID TLV of the LTR, if any. This value is meaningless if the prvtCfmLtrChassisId has a…
1.3.6.1.4.1.738.10.5.131.1.6.3.1.10ColumnprvtCfmLtrChassisIdread-onlycurrentThe Chassis ID returned in the Sender ID TLV of the LTR, if any. The format of this object is determined by the value of the prvtCfmLtrChassisIdSubtype object.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.11ColumnprvtCfmLtrManAddressDomainread-onlycurrentThe TDomain that identifies the type and format of the related prvtCfmLtrManAddress object, used to access the SNMP agent of the system transmitting the LTR. R…
1.3.6.1.4.1.738.10.5.131.1.6.3.1.12ColumnprvtCfmLtrManAddressread-onlycurrentThe TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related o…
1.3.6.1.4.1.738.10.5.131.1.6.3.1.13ColumnprvtCfmLtrIngressread-onlycurrentThe value returned in the Ingress Action Field of the LTM.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.14ColumnprvtCfmLtrIngressMacread-onlycurrentMAC address returned in the ingress MAC address field.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.15ColumnprvtCfmLtrIngressPortIdSubtyperead-onlycurrentFormat of the Ingress Port ID.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.16ColumnprvtCfmLtrIngressPortIdread-onlycurrentIngress Port ID. The format of this object is determined by the value of the prvtCfmLtrIngressPortIdSubtype object.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.17ColumnprvtCfmLtrEgressread-onlycurrentThe value returned in the Egress Action Field of the LTM.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.18ColumnprvtCfmLtrEgressMacread-onlycurrentMAC address returned in the egress MAC address field.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.19ColumnprvtCfmLtrEgressPortIdSubtyperead-onlycurrentFormat of the egress Port ID.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.20ColumnprvtCfmLtrEgressPortIdread-onlycurrentEgress Port ID. The format of this object is determined by the value of the prvtCfmLtrEgressPortIdSubtype object.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.21ColumnprvtCfmLtrOrganizationSpecificTlvread-onlycurrentAll Organization specific TLVs returned in the LTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.22ColumnprvtCfmLtrTimeread-onlycurrentRemote MPs response time in milliseconds.
1.3.6.1.4.1.738.10.5.131.1.6.3.1.23ColumnprvtCfmLtrSourceMacread-onlycurrentMAC address that originated the LTR.
1.3.6.1.4.1.738.10.5.131.1.6.4TableprvtCfmLbrTablenot-accessiblecurrentTable contains loopback results following the last loopback operation.
1.3.6.1.4.1.738.10.5.131.1.6.4.1RowprvtCfmLbrEntrynot-accessiblecurrentprvtCfmLbrEntry
1.3.6.1.4.1.738.10.5.131.1.6.4.1.1ColumnprvtCfmLbrSeqNumbernot-accessiblecurrentTransaction identifier/Sequence number of the received LBR.
1.3.6.1.4.1.738.10.5.131.1.6.4.1.2ColumnprvtCfmLbrReceiveOrdernot-accessiblecurrentAn index to distinguish among multiple LBRs with the same LBR Transaction Identifier field value. This situation can appear in the case of multicast loopback.
1.3.6.1.4.1.738.10.5.131.1.6.4.1.3ColumnprvtCfmLbrTimeread-onlycurrentRemote MEPs response time in milliseconds.
1.3.6.1.4.1.738.10.5.131.1.6.4.1.4ColumnprvtCfmLbrMacAddressread-onlycurrentRemote MEPs mac address. For unicast loopback this is the same as prvtCfmMepTransmitLbmDestMacAddress, but for multicast loopback there will be different entri…
1.3.6.1.4.1.738.10.5.131.1.6.4.1.5ColumnprvtCfmLbrBadMsduread-onlycurrentResult of the Data TLV verification.
1.3.6.1.4.1.738.10.5.131.1.7NodeprvtCfmProfile
1.3.6.1.4.1.738.10.5.131.1.7.1ScalarprvtCfmProfileTableNextIndexread-onlycurrentThis object contains an unused value for prvtCfmProfileIndex in the prvtCfmProfileTable or a zero to indicate that none exist.
1.3.6.1.4.1.738.10.5.131.1.7.2TableprvtCfmProfileTablenot-accessiblecurrentTable contains loopback results from all remote MEPs in the MA.
1.3.6.1.4.1.738.10.5.131.1.7.2.1RowprvtCfmProfileEntrynot-accessiblecurrentEntry in profile table
1.3.6.1.4.1.738.10.5.131.1.7.2.1.1ColumnprvtCfmProfileIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.2ColumnprvtCfmProfileRowStatusread-createcurrentThe status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.3ColumnprvtCfmProfileDescrread-createcurrentA description for this profile. This field must be unique among all profiles.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.4ColumnprvtCfmProfilePriorityread-createcurrent802.1p class-of-service setting.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.5ColumnprvtCfmProfileRateread-createcurrentNumber of Request packets to send each time.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.6ColumnprvtCfmProfileSizeread-createcurrentSize of data TLV included in probe packets (in octets).
1.3.6.1.4.1.738.10.5.131.1.7.2.1.7ColumnprvtCfmProfileBucketSizeread-createcurrentNumber of the results to save for results calculation.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.8ColumnprvtCfmProfile1wJitterErrorread-createcurrentSpecifies one-way jitter error values to monitor in milliseconds.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.9ColumnprvtCfmProfile1wJitterWarningread-createcurrentSpecifies one-way jitter warning values to monitor in milliseconds.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.10ColumnprvtCfmProfileJitterErrorread-createcurrentSpecifies round-trip jitter error values to monitor in milliseconds.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.11ColumnprvtCfmProfileJitterErrorPeriodread-createcurrentSpecifies the duration jitter occurs in seconds.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.12ColumnprvtCfmProfileJitterWarningread-createcurrentSpecifies round-trip jitter warning values to monitor in milliseconds. If set value is greater than the jitter-error it means that the warning is disabled.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.13ColumnprvtCfmProfileJitterWarningPeriodread-createcurrentSpecifies the duration jitter occurs in seconds.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.14ColumnprvtCfmProfileFrameLossErrorread-createcurrentSpecifies round-trip frame-loss error values to monitor. The default is frame-loss of 10% is reported.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.15ColumnprvtCfmProfileFrameLossWarningread-createcurrentSpecifies round-trip frame-loss warning values to monitor. The default is frame-loss of 8% is reported. If set value is greater than the frame-loss-error it me…
1.3.6.1.4.1.738.10.5.131.1.7.2.1.16ColumnprvtCfmProfileLatencyErrorread-createcurrentSpecifies round-trip latency error values to monitor in milliseconds.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.17ColumnprvtCfmProfileLatencyErrorPeriodread-createcurrentSpecifies the duration latency increase occurs in seconds.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.18ColumnprvtCfmProfileLatencyWarningread-createcurrentSpecifies round-trip latency error values to monitor in milliseconds. If set value is greater than the latency-error it means that the warning is disabled.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.19ColumnprvtCfmProfileLatencyWarningPeriodread-createcurrentSpecifies the duration latency increase occurs.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.20ColumnprvtCfmProfileOneWayJitterEnabledread-createcurrentSpecify if one-way jitter is monitored.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.21ColumnprvtCfmProfileTwoWayJitterEnabledread-createcurrentSpecify if two-way jitter is monitored.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.22ColumnprvtCfmProfileFramelossEnabledread-createcurrentSpecify if frame-loss is monitored.
1.3.6.1.4.1.738.10.5.131.1.7.2.1.23ColumnprvtCfmProfileLatencyEnabledread-createcurrentSpecify if two-way latency is monitored.
1.3.6.1.4.1.738.10.5.131.1.8NodeprvtCfmProcess
1.3.6.1.4.1.738.10.5.131.1.8.1TableprvtCfmProcessTablenot-accessiblecurrentPrivate extension of prvtCfmMaTable. Controls the two-way monitoring process for MEP's in the MA.
1.3.6.1.4.1.738.10.5.131.1.8.1.1RowprvtCfmProcessEntrynot-accessiblecurrentprvtCfmProcessEntry
1.3.6.1.4.1.738.10.5.131.1.8.1.1.1ColumnprvtCfmProcessIndexnot-accessiblecurrentTable index.
1.3.6.1.4.1.738.10.5.131.1.8.1.1.2ColumnprvtCfmProcessRowStatusread-createcurrentThe status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
1.3.6.1.4.1.738.10.5.131.1.8.1.1.3ColumnprvtCfmProcessProfileIndexread-createcurrentIndex of the monitoring profile to be used.
1.3.6.1.4.1.738.10.5.131.1.8.1.1.4ColumnprvtCfmProcessNameread-onlycurrentThe name of the process. Should be unique per domain/MA
1.3.6.1.4.1.738.10.5.131.1.8.1.1.5ColumnprvtCfmProcessShutdownread-createcurrentThe value 'true' will disable two-way monitoring process for MEP's in the MA.
1.3.6.1.4.1.738.10.5.131.1.8.1.1.6ColumnprvtCfmProcessRepeatIntervalread-createcurrentRepeating frequency of the monitoring process.
1.3.6.1.4.1.738.10.5.131.1.8.1.1.7ColumnprvtCfmProcessPacketTyperead-createcurrentUse CFM Loopback or Y.1731 LMMs and DMMs packets.
1.3.6.1.4.1.738.10.5.131.1.8.1.1.8ColumnprvtCfmProcessUnreturnedPktsread-onlycurrentNumber of requests for which a reply hasn't been received. These packets will be counted as lost when they enter timeout.
1.3.6.1.4.1.738.10.5.131.1.8.2TableprvtCfmProcessResultTablenot-accessiblecurrentTable contains process results.
1.3.6.1.4.1.738.10.5.131.1.8.2.1RowprvtCfmProcessResultEntrynot-accessiblecurrentprvtCfmProcessResultEntry
1.3.6.1.4.1.738.10.5.131.1.8.2.1.1ColumnprvtCfmProcessResultOneWayJitterread-onlycurrentOne way jitter calculated for a specific remote MEP in milliseconds
1.3.6.1.4.1.738.10.5.131.1.8.2.1.2ColumnprvtCfmProcessResultTwoWayJitterread-onlycurrentTwo way jitter calculated for a specific remote MEP in milliseconds
1.3.6.1.4.1.738.10.5.131.1.8.2.1.3ColumnprvtCfmProcessResultLatencyread-onlycurrentTwo way latency calculated for a specific remote MEP in milliseconds
1.3.6.1.4.1.738.10.5.131.1.8.2.1.4ColumnprvtCfmProcessResultFramelossread-onlycurrentTwo way frameloss calculated for a specific remote MEP in units of hundredths of percent. Note: When prvtCfmProcessResultFrameloss has value of 10000, all the …
1.3.6.1.4.1.738.10.5.131.1.9NodeprvtCfmMaAisLckVlan
1.3.6.1.4.1.738.10.5.131.1.9.1TableprvtCfmMaAisLckVlanTablenot-accessiblecurrentTable includes extra variables needed for AIS/LCK configurable vlans
1.3.6.1.4.1.738.10.5.131.1.9.1.1RowprvtCfmMaAisLckVlanEntrynot-accessiblecurrentTable includes extra variables needed for AIS/LCK configurable vlans
1.3.6.1.4.1.738.10.5.131.1.9.1.1.1ColumnprvtCfmMaAisLckVlanIdnot-accessiblecurrentVlan ID (towards customer level) that the generated AIS/LCK packets should use.
1.3.6.1.4.1.738.10.5.131.1.9.1.1.2ColumnprvtCfmMaAisLckVlanRowStatusread-createcurrentThe status of the row.
Type Definitions
NameSyntaxStatusDescription
LldpChassisIdOCTET STRINGcurrentThis TC describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which identifies the format of the particular LldpChassisId object instan…
LldpChassisIdSubtypeINTEGER { notSet(0), chassisComponent(1), interfaceAlias(2), portComponent(3), macAddress(4), networkAddress(5), interfaceName(6), local(7) }currentThis TC describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a chassis componen…
LldpPortIdOCTET STRINGcurrentThis TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If th…
LldpPortIdSubtypeINTEGER { notSet(0), interfaceAlias(1), portComponent(2), macAddress(3), networkAddress(4), interfaceName(5), agentCircuitId(6), local(7) }currentThis TC describes the source of a particular type of port identifier used in the LLDP MIB. The enumeration 'interfaceAlias(1)' represents a port identifier based on the ifAlias MIB object, defined in IETF RFC 2863. The …
PrvtCfmCcmIntervalINTEGER { interval300Hz(1), interval10ms(2), interval100ms(3), interval1s(4), interval10s(5), interval1min(6), interval10min(7) }currentIndicates the interval at which CCMs are sent by a MEP. The possible values are: interval300Hz(1) CCMs are sent every 3 1/3 milliseconds (300Hz). interval10ms(2) CCMs are sent every 10 milliseconds. interval100ms(3) CCM…
PrvtCfmEgressActionFieldValueINTEGER { notSet(0), egrOK(1), egrDown(2), egrBlocked(3), egrVid(4) }currentPossible values returned in the egress action field
PrvtCfmFngStateINTEGER { fngReset(1), fngDefect(2), fngReportDefect(3), fngDefectReported(4), fngDefectClearing(5) }currentIndicates the diferent states of the MEP Fault Notification Generator State Machine. fngReset(1) No defect has been present since the prvtCfmMepFngResetTime timer expired, or since the state machine was last reset. fngD…
PrvtCfmHighestDefectPriINTEGER { none(0), defRDICCM(1), defMACstatus(2), defRemoteCCM(3), defErrorCCM(4), defXconCCM(5) }currentAn enumerated value, equal to the contents of the variable highestDefect (20.33.9 and Table 20-1), indicating the highest-priority defect that has been present since the MEP Fault Notification Generator State Machine wa…
PrvtCfmIdPermissionINTEGER { sendIdNone(1), sendIdChassis(2), sendIdManage(3), sendIdChassisManage(4), sendIdDefer(5) }currentIndicates what, if anything, is to be included in the Sender ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs. The valid values are: sendIdNone(1) The Sender ID TLV is not to be sent. sendIdChassis(2) The Chassis ID Len…
PrvtCfmIdPermissionDefINTEGER { sendIdNone(1), sendIdChassis(2), sendIdManage(3), sendIdChassisManage(4) }currentIndicates what, if anything, is to be included in the Sender ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs. The valid values are: sendIdNone(1) The Sender ID TLV is not to be sent. sendIdChassis(2) The Chassis ID Len…
PrvtCfmIndexIntegerNextFreealways contains a legal value (if non-zero) for an index that is not currently used in the relevant table. The Command Generator (Network Management Application) reads this variable and uses the (non-zero) value read when creating a new row with an SNMP SET. When the SET is performed, the Command Responder (agent) must determine whether the value is indeed still unused; Two Network Management Applications may attempt to create a row (configuration entry) simultaneously and use the same value. If it is currently unused, the SET succeeds and the Command Responder (agent) changes the value of this object, according to an implementation-specific algorithm. If the value is in use, however, the SET fails. The Network Management Application must then re-read this variable to obtain a new usable value.current
PrvtCfmIngressActionFieldValueINTEGER { ingOk(1), ingDown(2), ingBlocked(3), ingVid(4) }currentPossible values returned in the ingress action field.
PrvtCfmInterfaceStatusINTEGER { isNoInterfaceStatusTLV(0), isUp(1), isDown(2), isTesting(3), isUnknown(4), isDormant(5), isNotPresent(6), isLowerLayerDown(7) }currentAn enumerated value from the Interface Status TLV from the last CCM received from the last MEP. It indicates the status of the Interface within which the MEP transmitting the CCM is configured, or the next lower Interfa…
PrvtCfmLowestAlarmPriINTEGER { allDef(1), macRemErrXcon(2), remErrXcon(3), errXcon(4), xcon(5), noXcon(6) }currentAn integer value specifying the lowest priority defect that is allowed to generate a Fault Alarm (20.9.5), either: allDef(1) DefRDICCM, DefMACstatus, DefRemoteCCM, DefErrorCCM, and DefXconCCM; macRemErrXcon(2) Only DefM…
PrvtCfmMaintAssocNameOCTET STRING (SIZE(1..22))currentDenotes a generic Maintenance Association Name. It is the part of the Maintenance Association Identifier which is unique within the Maintenance Domain Name and is appended to the Maintenance Domain Name to form the Main…
PrvtCfmMaintAssocNameOrNoneOCTET STRING (SIZE(0..22))currentSame as PrvtCfmMaintAssocName except that zero length string represents no association name.
PrvtCfmMaintAssocNameTypeINTEGER { primaryVid(1), charString(2), icc(32) }currentA value that represents a type (and thereby the format) of a PrvtCfmMaintAssocName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolutel…
PrvtCfmMaintDomainNameOCTET STRING (SIZE(1..22))currentDenotes a generic Maintenance Domain Name. A PrvtCfmMaintDomainName value is always interpreted within the context of a PrvtCfmMaintDomainNameType value. Every usage of the PrvtCfmMaintDomainName textual convention is r…
PrvtCfmMaintDomainNameOrNoneOCTET STRING (SIZE(0..22))currentSame as PrvtCfmMaintDomainName except that zero length string represents no domain name.
PrvtCfmMaintDomainNameTypeINTEGER { none(1), charString(4) }currentA value that represents a type (and thereby the format) of a PrvtCfmMaintDomainName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolute…
PrvtCfmMDLevelTCInteger32 (0..7)currentInteger identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM PDUs. Lower number…
PrvtCfmMepIdUnsigned32 (1..8191)currentMaintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP.
PrvtCfmMepIdOrZeroUnsigned32 (0..8191)currentMaintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP. The special value 0 is allowed to indicate special cases, for example that …
PrvtCfmMhfCreationINTEGER { defMHFnone(1), defMHFdefault(2), defMHFexplicit(3), defMHFdefer(4) }currentIndicates if the Management Entity can create MHFs. The valid values are: defMHFnone(1) No MHFs can be created for this VID. defMHFdefault(2) MHFs can be created on this VID on any Bridge port through which this VID can…
PrvtCfmMhfCreationDefINTEGER { defMHFnone(1), defMHFdefault(2), defMHFexplicit(3) }currentIndicates if the Management Entity can create MHFs. The valid values are: defMHFnone(1) No MHFs can be created for this VID. defMHFdefault(2) MHFs can be created on this VID on any Bridge port through which this VID can…
PrvtCfmMpDirectionINTEGER { down(1), up(2) }currentIndicates the direction in which the Maintenance association (MEP or MIP) faces on the bridge port: down(1) Sends Continuity Check Messages away from the MAC Relay Entity. up(2) Sends Continuity Check Messages towards t…
PrvtCfmPortStatusINTEGER { psNoPortStateTLV(0), psBlocked(1), psUp(2) }currentAn enumerated value from he Port Status TLV from the last CCM received from the last MEP. It indicates the ability of the Bridge Port on which the transmitting MEP resides to pass ordinary data, regardless of the status…
PrvtCfmRelayActionFieldValueINTEGER { rlyHit(1), rlyFdb(2), rlyMpdb(3) }currentPossible values the Relay action field can take.
PrvtCfmRemoteMepStateINTEGER { rMepIdle(1), rMepStart(2), rMepFailed(3), rMepOk(4) }currentOperational state of the remote MEP state machine. This state machine monitors the reception of valid CCMs from a remote MEP with a specific MEPID. It uses a timer that expires in 3.5 times the length of time indicated …
MIB Viewer