PRVT-INTERWORKING-OS-MIB
50 objects
The MIB enables display configuration of the device OS features.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| PRVT-SWITCH-MIB | software |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TestAndIncr TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.738.10.111.1 | IdentityprvtInterworkingOSMIB | The MIB enables display configuration of the device OS features. | ||
| 1.3.6.1.4.1.738.10.111.1.1 | NodeprvtInterworkingOSMIBObjects | |||
| 1.3.6.1.4.1.738.10.111.1.1.1 | Nodeversion | |||
| 1.3.6.1.4.1.738.10.111.1.1.1.1 | ScalaroSversionNumber | read-only | current | This object identifies version number of the OS |
| 1.3.6.1.4.1.738.10.111.1.1.1.2 | ScalaroSversionDate | read-only | current | This object identifies version date of the OS |
| 1.3.6.1.4.1.738.10.111.1.1.1.3 | ScalarbootVersionDate | read-only | current | This object identifies boot version date of the OS |
| 1.3.6.1.4.1.738.10.111.1.1.2 | Nodemanagement | |||
| 1.3.6.1.4.1.738.10.111.1.1.2.1 | NodemanagementMisc | |||
| 1.3.6.1.4.1.738.10.111.1.1.2.1.1 | ScalarmanagementMiscReset | read-write | current | Physically performs a hardware reset of the unit. Use with care. A reset (2) resets the unit, the resetToDefaults (3) resets the configuration file to factory … |
| 1.3.6.1.4.1.738.10.111.1.1.2.1.2 | ScalarmanagementMiscReload | read-write | current | Reload the unit software, the unit hardware will not be affected. A value of noop (1) is always returned for a GET operation. |
| 1.3.6.1.4.1.738.10.111.1.1.2.1.3 | ScalarmanagementMiscReloadInTime | read-write | current | Indicates time for scheduled reload without save in hour:min. octets contents range 1 day 0x01..0x1f (1-31) 2 month 0x01..0x0C (1..12) where january = 1 decemb… |
| 1.3.6.1.4.1.738.10.111.1.1.2.1.4 | ScalarmanagementMiscReloadAtTime | read-write | current | Indicates time for scheduled reload without save at day:month:hour:min. octets contents range 1 day 0x01..0x1f (1-31) 2 month 0x01..0x0C (1..12) where january … |
| 1.3.6.1.4.1.738.10.111.1.1.2.2 | NodeprvtBootConfigUpgrade | |||
| 1.3.6.1.4.1.738.10.111.1.1.2.2.1 | ScalarprvtBootUpgradeSrcURI | read-write | current | The object represents an address from where the application will be copied during an upgrade process initiated using the object prvtBootUpgradeCmd. The address… |
| 1.3.6.1.4.1.738.10.111.1.1.2.2.2 | ScalarprvtBootApplicationName | read-write | current | This object contains the file name of the application that will be loaded upon the next restart. Sets to this object must be the file name of an existing OS im… |
| 1.3.6.1.4.1.738.10.111.1.1.2.2.4 | ScalarprvtBootUpgradeCmd | read-write | current | This field is used to initiate an upgrade process. The object prvtBootUpgradeSrcURI is to contain the source URI of where to obtain the new image. When a get r… |
| 1.3.6.1.4.1.738.10.111.1.1.2.2.5 | ScalarprvtBootOperStatus | read-only | current | The object is used to show the current status of the upgrading process. The default value is ready(1), indicating that the process is idle. upgradeInProgress(3… |
| 1.3.6.1.4.1.738.10.111.1.1.2.2.6 | ScalarprvtBootErrorCondition | read-only | current | This object gives the error condition of the most recent upgrade process initiated using the object prvtBootUpgradeCmd. |
| 1.3.6.1.4.1.738.10.111.1.1.2.3 | NodeprvtConfigFiles | |||
| 1.3.6.1.4.1.738.10.111.1.1.2.3.1 | NodeprvtConfigFileAction | |||
| 1.3.6.1.4.1.738.10.111.1.1.2.3.1.1 | NodeprvtConfigFileSource | |||
| 1.3.6.1.4.1.738.10.111.1.1.2.3.1.1.1 | ScalarprvtConfigSourceType | read-write | current | The type of the location of the source file used by prvtConfigAction. |
| 1.3.6.1.4.1.738.10.111.1.1.2.3.1.1.2 | ScalarprvtConfigSourceFileName | read-write | current | The name of the file intended to be copied if prvtConfigAction='copy'; or the file whose name is to be changed if prvtConfigFileAction='rename'; or the file to… |
| 1.3.6.1.4.1.738.10.111.1.1.2.3.1.2 | NodeprvtConfigFileTarget | |||
| 1.3.6.1.4.1.738.10.111.1.1.2.3.1.2.1 | ScalarprvtConfigTargetType | read-write | current | The type of the location of the destination file used by prvtConfigAction. |
| 1.3.6.1.4.1.738.10.111.1.1.2.3.1.2.2 | ScalarprvtConfigTargetFileName | read-write | current | The name of the file intended to be copied to if prvtConfigAction='copy'; or the new file name if prvtConfigFileAction='rename'. Otherwise, has no significance. |
| 1.3.6.1.4.1.738.10.111.1.1.2.3.1.3 | NodeprvtConfigFileRemote | |||
| 1.3.6.1.4.1.738.10.111.1.1.2.3.1.3.1 | ScalarprvtConfigRemoteAddressType | read-write | current | The address type of prvtConfigRemoteAddress. Note that prvtConfigAction currently only support actions that use IPv4 address types. |
| 1.3.6.1.4.1.738.10.111.1.1.2.3.1.3.2 | ScalarprvtConfigRemoteAddress | read-write | current | The IP address of the remote file server to use for the upload or download request. |
| 1.3.6.1.4.1.738.10.111.1.1.2.3.1.3.3 | ScalarprvtConfigRemotePort | read-write | current | The transport protocol port to use for the upload or download request. The value '0' indicates to use the IANA default port number for the selected protocol. |
| 1.3.6.1.4.1.738.10.111.1.1.2.3.1.3.4 | ScalarprvtConfigRemoteUser | read-write | current | The user name to use for the upload or download request. |
| 1.3.6.1.4.1.738.10.111.1.1.2.3.1.3.5 | ScalarprvtConfigRemotePassword | read-write | current | The user password to use for the upload or download request. |
| 1.3.6.1.4.1.738.10.111.1.1.2.3.1.4 | ScalarprvtConfigActionSpinLock | read-write | current | This object is used to facilitate prvtConfigAction sets by multiple managers, specifically sets that transitions prvtConfigAction from 'idle' to 'prepare'. The… |
| 1.3.6.1.4.1.738.10.111.1.1.2.3.1.5 | ScalarprvtConfigAction | read-write | current | Represents a file action request to be committed immediately (with set request) or that is being commited (with get request). idle = there is no action being p… |
| 1.3.6.1.4.1.738.10.111.1.1.2.4 | NodeprvtFileSystem | |||
| 1.3.6.1.4.1.738.10.111.1.1.2.4.1 | ScalarprvtFileSystemSize | read-only | current | The size of the file system flash. |
| 1.3.6.1.4.1.738.10.111.1.1.2.4.2 | ScalarprvtFileSystemUsedSize | read-only | current | The size of the currently used part of the file system flash. |
| 1.3.6.1.4.1.738.10.111.1.1.2.4.3 | ScalarprvtFileSystemFreeSize | read-only | current | The size of the currently free to use part of the file system flash. |
| 1.3.6.1.4.1.738.10.111.1.1.2.4.4 | TableprvtFileSystemFileTable | not-accessible | current | A table of files existing in the device's file system. |
| 1.3.6.1.4.1.738.10.111.1.1.2.4.4.1 | RowprvtFileSystemFileEntry | not-accessible | current | An entry of prvtFileSystemFileTable. |
| 1.3.6.1.4.1.738.10.111.1.1.2.4.4.1.1 | ColumnprvtFileSystemFileType | not-accessible | current | The file type. The value 'osImage' signals that this file is a software image file for possible use by the device. |
| 1.3.6.1.4.1.738.10.111.1.1.2.4.4.1.2 | ColumnprvtFileSystemFileIndex | not-accessible | current | An index uniquely identifying a file. This value does not change through-out the lifetime of a file, but may change after system restarts. Note that after a fi… |
| 1.3.6.1.4.1.738.10.111.1.1.2.4.4.1.3 | ColumnprvtFileSystemFileCreated | read-only | current | Represents the date and time this file was created. |
| 1.3.6.1.4.1.738.10.111.1.1.2.4.4.1.4 | ColumnprvtFileSystemFileSize | read-only | current | Represents the size of this file. |
| 1.3.6.1.4.1.738.10.111.1.1.2.4.4.1.5 | ColumnprvtFileSystemFileName | read-only | current | Represents the name of this file. |
| 1.3.6.1.4.1.738.10.111.1.1.2.4.4.1.6 | ColumnprvtFileSystemFileDelete | read-write | current | May be used to delete a file. To delete a file, this object must be set equal to the value of prvtFileSystemFileName of the same row. Note that some files are … |
| 1.3.6.1.4.1.738.10.111.1.1.3 | Nodecpu | |||
| 1.3.6.1.4.1.738.10.111.1.1.3.1 | NodecpuMonitoring | |||
| 1.3.6.1.4.1.738.10.111.1.1.3.1.1 | ScalarcpuMonitoringUtilization | read-only | current | The object shows the current CPU utilization |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PrvtFileLocationType | INTEGER { fileSystem(1), runningBinary(2), runningScript(3), techSupport(4), tftp(5), ftp(6) } | current |