PRVT-OSPF-MIB
108 objects
The PRVT OSPF MIB module contains additional information, needed to control the OSPF protocol, that is not found in the standard RFC
Imported Objects
| PRVT-SWITCH-MIB | routingProtocols |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.738.10.6.4.2 | IdentityprvtOspfMIB | The PRVT OSPF MIB module contains additional information, needed to control the OSPF protocol, that is not found in the standard RFC | ||
| 1.3.6.1.4.1.738.10.6.4.2.1 | NodeprvtOspfObjects | |||
| 1.3.6.1.4.1.738.10.6.4.2.1.1 | ScalarprvtOspfRouterId | read-write | current | A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the … |
| 1.3.6.1.4.1.738.10.6.4.2.1.2 | ScalarprvtOspfAdminStat | read-write | current | The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it … |
| 1.3.6.1.4.1.738.10.6.4.2.1.3 | ScalarprvtOspfVersionNumber | read-only | current | The current version number of the OSPF protocol is 2. |
| 1.3.6.1.4.1.738.10.6.4.2.1.4 | ScalarprvtOspfExternLsaCount | read-only | current | The number of external (LS type 5) link-state advertisements in the link-state database. |
| 1.3.6.1.4.1.738.10.6.4.2.1.5 | ScalarprvtOspfExternLsaCksumSum | read-only | current | The 32-bit unsigned sum of the LS checksums of the external link-state advertisements contained in the link-state database. This sum can be used to determine i… |
| 1.3.6.1.4.1.738.10.6.4.2.1.6 | ScalarprvtOspfTOSSupport | read-only | current | The router's support for type-of-service routing. |
| 1.3.6.1.4.1.738.10.6.4.2.1.7 | ScalarprvtOspfOriginateNewLsas | read-only | current | The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA. |
| 1.3.6.1.4.1.738.10.6.4.2.1.8 | ScalarprvtOspfRxNewLsas | read-only | current | The number of link-state advertisements re- ceived determined to be new instantiations. This number does not include newer instantia- tions of self-originated … |
| 1.3.6.1.4.1.738.10.6.4.2.1.9 | ScalarprvtOspfExtLsdbLimit | read-write | current | The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the… |
| 1.3.6.1.4.1.738.10.6.4.2.1.10 | ScalarprvtOspfMulticastExtensions | read-only | current | A Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. … |
| 1.3.6.1.4.1.738.10.6.4.2.1.11 | ScalarprvtOspfExitOverflowInterval | read-write | current | The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default A… |
| 1.3.6.1.4.1.738.10.6.4.2.1.12 | ScalarprvtOspfDemandExtensions | read-only | current | The router's support for demand routing. |
| 1.3.6.1.4.1.738.10.6.4.2.1.13 | TableprvtOspfAreaTable | not-accessible | current | Information describing the configured parameters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.738.10.6.4.2.1.13.1 | RowprvtOspfAreaEntry | not-accessible | current | Information describing the configured parameters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.4.1.738.10.6.4.2.1.13.1.1 | ColumnprvtOspfAreaId | not-accessible | current | An octet string, uniquely identifying area. Both A.B.C.D or integer notations are supported. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.738.10.6.4.2.1.13.1.2 | ColumnprvtOspfAreaRowStatus | read-create | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.4.1.738.10.6.4.2.1.13.1.3 | ColumnprvtOspfAreaType | read-create | current | The area type |
| 1.3.6.1.4.1.738.10.6.4.2.1.13.1.4 | ColumnprvtOspfAreaSummary | read-create | current | The variable ospfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will ne… |
| 1.3.6.1.4.1.738.10.6.4.2.1.13.1.5 | ColumnprvtOspfAreaAuthType | read-create | current | The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis. |
| 1.3.6.1.4.1.738.10.6.4.2.1.13.1.6 | ColumnprvtOspfAreaShortcutConfiguration | read-create | current | Allows the user to set whether the area allows the traffict to pass through other not backbone area |
| 1.3.6.1.4.1.738.10.6.4.2.1.13.1.7 | ColumnprvtOspfAreaNssaTransitRole | read-create | current | Transit role |
| 1.3.6.1.4.1.738.10.6.4.2.1.13.1.8 | ColumnprvtOspfAreaImportList | read-create | current | Import List |
| 1.3.6.1.4.1.738.10.6.4.2.1.13.1.9 | ColumnprvtOspfAreaExportList | read-create | current | Export List |
| 1.3.6.1.4.1.738.10.6.4.2.1.13.1.10 | ColumnprvtOspfAreaMetric | read-create | current | Area metric |
| 1.3.6.1.4.1.738.10.6.4.2.1.13.1.11 | ColumnprvtOspfAreaMetricType | read-create | current | Area metric type |
| 1.3.6.1.4.1.738.10.6.4.2.1.13.1.12 | ColumnprvtOspfAreaDefaultCost | read-create | current | Default cost |
| 1.3.6.1.4.1.738.10.6.4.2.1.14 | TableprvtOspfLsdbTable | not-accessible | current | The OSPF Process's Link State Database. |
| 1.3.6.1.4.1.738.10.6.4.2.1.14.1 | RowprvtOspfLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.738.10.6.4.2.1.14.1.1 | ColumnprvtOspfLsdbAreaId | not-accessible | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.738.10.6.4.2.1.14.1.2 | ColumnprvtOspfLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.4.1.738.10.6.4.2.1.14.1.3 | ColumnprvtOspfLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.738.10.6.4.2.1.14.1.4 | ColumnprvtOspfLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.738.10.6.4.2.1.14.1.5 | ColumnprvtOspfLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.738.10.6.4.2.1.14.1.6 | ColumnprvtOspfLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.738.10.6.4.2.1.14.1.7 | ColumnprvtOspfLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.738.10.6.4.2.1.14.1.8 | ColumnprvtOspfLsdbLength | read-only | current | The length of the ospf packet |
| 1.3.6.1.4.1.738.10.6.4.2.1.14.1.9 | ColumnprvtOspfLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.738.10.6.4.2.1.15 | TableprvtOspfExtLsdbTable | not-accessible | current | The OSPF Process's Links State Database. |
| 1.3.6.1.4.1.738.10.6.4.2.1.15.1 | RowprvtOspfExtLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.738.10.6.4.2.1.15.1.1 | ColumnprvtOspfExtLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.738.10.6.4.2.1.15.1.2 | ColumnprvtOspfExtLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.738.10.6.4.2.1.15.1.3 | ColumnprvtOspfExtLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.738.10.6.4.2.1.15.1.4 | ColumnprvtOspfExtLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.738.10.6.4.2.1.15.1.5 | ColumnprvtOspfExtLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.738.10.6.4.2.1.15.1.6 | ColumnprvtOspfExtLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.738.10.6.4.2.1.15.1.7 | ColumnprvtOspfExtLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.738.10.6.4.2.1.16 | TableprvtOspfIfTable | not-accessible | current | The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.738.10.6.4.2.1.16.1 | RowprvtOspfIfEntry | not-accessible | current | The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. |
| 1.3.6.1.4.1.738.10.6.4.2.1.16.1.1 | ColumnprvtOspfIfIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.738.10.6.4.2.1.16.1.2 | ColumnprvtOspfIfRowStatus | read-create | current | This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implem… |
| 1.3.6.1.4.1.738.10.6.4.2.1.16.1.3 | ColumnprvtOspfIfAreaId | read-create | current | An octet string, uniquely identifying area. Both A.B.C.D or integer notations are supported. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.738.10.6.4.2.1.16.1.4 | ColumnprvtOspfIfWorkingMode | read-create | current | Working mode |
| 1.3.6.1.4.1.738.10.6.4.2.1.16.1.5 | ColumnprvtOspfIfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a link state update packet over this interface. |
| 1.3.6.1.4.1.738.10.6.4.2.1.16.1.6 | ColumnprvtOspfIfPriority | read-create | current | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.738.10.6.4.2.1.16.1.7 | ColumnprvtOspfIfHelloTimer | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.4.1.738.10.6.4.2.1.16.1.8 | ColumnprvtOspfIfDeadTimer | read-create | current | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.4.1.738.10.6.4.2.1.16.1.9 | ColumnprvtOspfIfRetransmitInterval | read-create | current | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.4.1.738.10.6.4.2.1.16.1.10 | ColumnprvtOspfIfOutputCost | read-create | current | No description in main model! |
| 1.3.6.1.4.1.738.10.6.4.2.1.16.1.11 | ColumnprvtOspfIfAuthType | read-create | current | Set authentication type of interface. If not set, will use the one from area! |
| 1.3.6.1.4.1.738.10.6.4.2.1.16.1.12 | ColumnprvtOspfIfAuthSimple | read-create | current | Simple authentication password (key).Up to 8 characters |
| 1.3.6.1.4.1.738.10.6.4.2.1.16.1.13 | ColumnprvtOspfIfType | read-create | current | No description in main model! |
| 1.3.6.1.4.1.738.10.6.4.2.1.17 | TableprvtOspfIfAuthMd5Table | not-accessible | current | Table for configuring message digest authentication password |
| 1.3.6.1.4.1.738.10.6.4.2.1.17.1 | RowprvtOspfIfAuthMd5Entry | not-accessible | current | Table rows |
| 1.3.6.1.4.1.738.10.6.4.2.1.17.1.1 | ColumnprvtOspfIfAuthMd5Key | not-accessible | current | Authentication key. |
| 1.3.6.1.4.1.738.10.6.4.2.1.17.1.2 | ColumnprvtOspfIfAuthMd5RowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.738.10.6.4.2.1.17.1.3 | ColumnprvtOspfIfAuthMd5Word | read-create | current | Authentication word. |
| 1.3.6.1.4.1.738.10.6.4.2.1.18 | TableprvtOspfNbrTable | not-accessible | current | A table of non-virtual neighbor information. |
| 1.3.6.1.4.1.738.10.6.4.2.1.18.1 | RowprvtOspfNbrEntry | not-accessible | current | The information regarding a single neighbor. |
| 1.3.6.1.4.1.738.10.6.4.2.1.18.1.1 | ColumnprvtOspfNbrIpAddr | not-accessible | current | The IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the ad- dress of another of the … |
| 1.3.6.1.4.1.738.10.6.4.2.1.18.1.2 | ColumnprvtOspfNbrAddressLessIndex | not-accessible | current | On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this c… |
| 1.3.6.1.4.1.738.10.6.4.2.1.18.1.3 | ColumnprvtOspfNbrRtrId | read-only | current | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.738.10.6.4.2.1.18.1.4 | ColumnprvtOspfNbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. … |
| 1.3.6.1.4.1.738.10.6.4.2.1.18.1.5 | ColumnprvtOspfNbrPriority | read-only | current | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designat… |
| 1.3.6.1.4.1.738.10.6.4.2.1.18.1.6 | ColumnprvtOspfNbrState | read-only | current | The State of the relationship with this Neigh- bor. |
| 1.3.6.1.4.1.738.10.6.4.2.1.18.1.7 | ColumnprvtOspfNbrEvents | read-only | current | The number of times this neighbor relationship has changed state, or an error has occurred. |
| 1.3.6.1.4.1.738.10.6.4.2.1.18.1.8 | ColumnprvtOspfNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.738.10.6.4.2.1.18.1.10 | ColumnprvtOspfNbmaNbrPermanence | read-only | current | This variable displays the status of the entry. 'dynamic' and 'permanent' refer to how the neighbor became known. |
| 1.3.6.1.4.1.738.10.6.4.2.1.18.1.11 | ColumnprvtOspfNbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor |
| 1.3.6.1.4.1.738.10.6.4.2.1.19 | TableprvtOspfRedistributeTable | not-accessible | current | The table represents the routing protocols, redistributed into the OSPF routing domain. Creation of conceptual row in the table starts the redistribution of th… |
| 1.3.6.1.4.1.738.10.6.4.2.1.19.1 | RowprvtOspfRedistributeEntry | not-accessible | current | The conceptual row represents a routing protocol, redistributed into OSPF |
| 1.3.6.1.4.1.738.10.6.4.2.1.19.1.1 | ColumnprvtOspfRedistributeProtocol | not-accessible | current | The specific routes redistributed into OSPF. For T4R model the valid values are connected, rip and static. For all the other models all of the above routes can… |
| 1.3.6.1.4.1.738.10.6.4.2.1.19.1.2 | ColumnprvtOspfRedistributeRowStatus | read-create | current | Indicates the status of the row. Setting of this field to active enables the redistribution of the protocol. Setting this field to destroy disables the redistr… |
| 1.3.6.1.4.1.738.10.6.4.2.1.19.1.3 | ColumnprvtOspfRedistributeMetric1 | read-create | current | The metric 1, with which the external routes will be redistributed in the OSPF |
| 1.3.6.1.4.1.738.10.6.4.2.1.19.1.4 | ColumnprvtOspfRedistributeMetric2 | read-create | current | The metric 2, with which the external routes will be redistributed in the OSPF |
| 1.3.6.1.4.1.738.10.6.4.2.1.19.1.5 | ColumnprvtOspfRedistributeRouteMap | read-create | current | The route map that would filter the redistributed routing information |
| 1.3.6.1.4.1.738.10.6.4.2.1.20 | TableprvtOspfRouterDataTable | not-accessible | current | Information about available routers |
| 1.3.6.1.4.1.738.10.6.4.2.1.20.1 | RowprvtOspfRouterDataEntry | not-accessible | current | The conceptual row represents a routing entry |
| 1.3.6.1.4.1.738.10.6.4.2.1.20.1.1 | ColumnprvtOspfRouterDataPrefix | not-accessible | current | Unknown in main data model |
| 1.3.6.1.4.1.738.10.6.4.2.1.20.1.2 | ColumnprvtOspfRouterDataType | not-accessible | current | Unknown in main data model |
| 1.3.6.1.4.1.738.10.6.4.2.1.20.1.3 | ColumnprvtOspfRouterDataAreaId | not-accessible | current | Unknown in main data model |
| 1.3.6.1.4.1.738.10.6.4.2.1.20.1.4 | ColumnprvtOspfRouterDataId | not-accessible | current | Unknown in main data model |
| 1.3.6.1.4.1.738.10.6.4.2.1.20.1.5 | ColumnprvtOspfRouterDataCost | not-accessible | current | Unknown in main data model |
| 1.3.6.1.4.1.738.10.6.4.2.1.20.1.6 | ColumnprvtOspfRouterDataCostType | read-only | current | Unknown in main data model |
| 1.3.6.1.4.1.738.10.6.4.2.1.20.1.7 | ColumnprvtOspfRouterDataDestType | read-only | current | Unknown in main data model |
| 1.3.6.1.4.1.738.10.6.4.2.1.20.1.8 | ColumnprvtOspfRouterDataPathType | read-only | current | Unknown in main data model |
| 1.3.6.1.4.1.738.10.6.4.2.1.20.1.9 | ColumnprvtOspfRouterDataFlags | read-only | current | Unknown in main data model |
| 1.3.6.1.4.1.738.10.6.4.2.1.20.1.10 | ColumnprvtOspfRouterDataExternalRouting | read-only | current | Unknown in main data model |
| 1.3.6.1.4.1.738.10.6.4.2.1.20.1.11 | ColumnprvtOspfRouterDataTag | read-only | current | Unknown in main data model |
| 1.3.6.1.4.1.738.10.6.4.2.1.21 | TableprvtOspfRouterPathTable | not-accessible | current | Information about available router's paths |
| 1.3.6.1.4.1.738.10.6.4.2.1.21.1 | RowprvtOspfRouterPathEntry | not-accessible | current | The conceptual row represents a routing's path entry |
| 1.3.6.1.4.1.738.10.6.4.2.1.21.1.1 | ColumnprvtOspfRouterPathNextHop | not-accessible | current | Unknown in main data model |
| 1.3.6.1.4.1.738.10.6.4.2.1.21.1.2 | ColumnprvtOspfRouterPathAdvertisingRouter | read-only | current | Unknown in main data model |
| 1.3.6.1.4.1.738.10.6.4.2.1.21.1.3 | ColumnprvtOspfRouterPathInterfaceName | read-only | current | Unknown in main data model |
| 1.3.6.1.4.1.738.10.6.4.2.1.22 | ScalarprvtOspfTrafficEngEnable | read-write | current | Set to 'true' to enable the traffic engineering extensions of OSPF. Note that enabling traffic engineering requires that router interface lo1 (PRVT-SWITCH-IPVL… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PrvtOspfDesignatedRouterPriority | Integer32 (0..255) | current | The values defined for the priority of a system for becoming the designated router. |
| PrvtOspfIpAddress | OCTET STRING (SIZE(4 | 16)) | current | An IP address. Currently only IPv4 network addresses are supported. Format for IPv4 addresses consist of 4 octets in network-byte order. |