PW-ENET-STD-MIB
23 objects
This MIB module describes a model for managing Ethernet point-to-point pseudowire services over a Packet Switched Network (PSN). Copyright (c) 2009 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of Internet Society, IETF or IETF Trust, nor the names of specific contributors, may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This version of this MIB module is part of RFC 5603; see the RFC itself for full legal notices.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| PW-STD-MIB | pwIndex |
| Q-BRIDGE-MIB | VlanIdOrAnyOrNone |
| RMON2-MIB | ZeroBasedCounter32 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.180 | IdentitypwEnetStdMIB | This MIB module describes a model for managing Ethernet point-to-point pseudowire services over a Packet Switched Network (PSN). Copyright (c) 2009 IETF Trust … | ||
| 1.3.6.1.2.1.180.1 | NodepwEnetObjects | |||
| 1.3.6.1.2.1.180.1.1 | TablepwEnetTable | not-accessible | current | This table contains the index to the Ethernet tables associated with this Ethernet PW, the VLAN configuration, and the VLAN mode. |
| 1.3.6.1.2.1.180.1.1.1 | RowpwEnetEntry | not-accessible | current | This table is indexed by the same index that was created for the associated entry in the PW generic table in the PW-STD-MIB module. The pwIndex and the pwEnetP… |
| 1.3.6.1.2.1.180.1.1.1.1 | ColumnpwEnetPwInstance | not-accessible | current | If multiple rows are mapped to the same PW, this index is used to uniquely identify the individual row. If the value of the VLAN field is known at the time of … |
| 1.3.6.1.2.1.180.1.1.1.2 | ColumnpwEnetPwVlan | read-create | current | This object defines the (service-delimiting) VLAN field value on the PW. The value 4095 MUST be used if the object is not applicable, for example, when mapping… |
| 1.3.6.1.2.1.180.1.1.1.3 | ColumnpwEnetVlanMode | read-create | current | This object indicates the mode of VLAN handling between the port or the virtual port associated with the PW and the PW encapsulation. - 'other' indicates an op… |
| 1.3.6.1.2.1.180.1.1.1.4 | ColumnpwEnetPortVlan | read-create | current | This object defines if the mapping between the original port (physical port or VPLS virtual port) to the PW is VLAN based or not. In case of VLAN mapping, this… |
| 1.3.6.1.2.1.180.1.1.1.5 | ColumnpwEnetPortIfIndex | read-create | current | This object is used to specify the ifIndex of the Ethernet port associated with this PW for point-to-point Ethernet service, or the ifIndex of the virtual inte… |
| 1.3.6.1.2.1.180.1.1.1.6 | ColumnpwEnetPwIfIndex | read-create | current | If the PW is modeled as an ifIndex in the ifTable, this object indicates the value of the ifIndex representing the Ethernet PW on the PSN side in the Etherlike… |
| 1.3.6.1.2.1.180.1.1.1.7 | ColumnpwEnetRowStatus | read-create | current | This object enables creating, deleting, and modifying this row. |
| 1.3.6.1.2.1.180.1.1.1.8 | ColumnpwEnetStorageType | read-create | current | This object indicates the storage type of this row. |
| 1.3.6.1.2.1.180.1.2 | TablepwEnetStatsTable | not-accessible | current | This table contains statistical counters specific for Ethernet PW. |
| 1.3.6.1.2.1.180.1.2.1 | RowpwEnetStatsEntry | not-accessible | current | Each entry represents the statistics gathered for the PW carrying the Ethernet. |
| 1.3.6.1.2.1.180.1.2.1.1 | ColumnpwEnetStatsIllegalVlan | read-only | current | The number of packets received (from the PSN) on this PW with either an illegal VLAN field, a missing VLAN field when one was expected, or an excessive VLAN fi… |
| 1.3.6.1.2.1.180.1.2.1.2 | ColumnpwEnetStatsIllegalLength | read-only | current | The number of packets that were received with an illegal Ethernet packet length on this PW. An illegal length is defined as being greater than the value in the… |
| 1.3.6.1.2.1.180.2 | NodepwEnetConformance | |||
| 1.3.6.1.2.1.180.2.1 | NodepwEnetGroups | |||
| 1.3.6.1.2.1.180.2.1.1 | GrouppwEnetGroup | current | Collection of objects for basic Ethernet PW configuration. | |
| 1.3.6.1.2.1.180.2.1.2 | GrouppwEnetStatsGroup | current | Collection of objects counting various PW level errors. | |
| 1.3.6.1.2.1.180.2.2 | NodepwEnetCompliances | |||
| 1.3.6.1.2.1.180.2.2.1 | CompliancepwEnetModuleFullCompliance | read-only | current | The compliance statement for agents that provides full support for the PW-ENET-STD-MIB module. Such devices can then be monitored and also be configured using … |
| 1.3.6.1.2.1.180.2.2.2 | CompliancepwEnetModuleReadOnlyCompliance | read-only | current | The compliance statement for agents that provide read- only support for the PW-ENET-STD-MIB module. Such devices can then be monitored but cannot be configured… |