SYS-MIB
211 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1978 | Nodengcan | |||
| 1.3.6.1.4.1.1978.2 | Nodetiger | |||
| 1.3.6.1.4.1.1978.2.18 | NodesysMIB | |||
| 1.3.6.1.4.1.1978.2.18.1 | Nodesystem | |||
| 1.3.6.1.4.1.1978.2.18.1.1 | ScalarsysDescr | read-write | mandatory | A textual description of the Tiger. This value corresponds to the description of the unit obtained from the configuration tool. This object should only contain… |
| 1.3.6.1.4.1.1978.2.18.1.2 | ScalarsysObjectID | read-only | mandatory | The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtr… |
| 1.3.6.1.4.1.1978.2.18.1.3 | ScalarsysUpTime | read-only | mandatory | The time (in hundredths of a second) since the system was last re-initialized. |
| 1.3.6.1.4.1.1978.2.18.1.4 | ScalarsysContact | read-write | mandatory | The textual identification of the contact person for this managed node, together with information on how to contact this person. This will normally be filled i… |
| 1.3.6.1.4.1.1978.2.18.1.5 | ScalarsysName | read-write | mandatory | An administratively-assigned name for this managed node as identified from the .cfg file that was filled in by the configuration tool. By convention, this is t… |
| 1.3.6.1.4.1.1978.2.18.1.6 | ScalarsysLocation | read-write | mandatory | The physical location of this node as identified from the .cfg file that was filled in by the configuration tool. (e.g., `telephone closet, 3rd floor'). |
| 1.3.6.1.4.1.1978.2.18.1.7 | ScalarsysServices | read-only | mandatory | A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each laye… |
| 1.3.6.1.4.1.1978.2.18.2 | Nodeinterfaces | |||
| 1.3.6.1.4.1.1978.2.18.2.1 | ScalarifNumber | read-only | mandatory | The number of network interfaces (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.1978.2.18.2.2 | TableifTable | not-accessible | mandatory | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.1978.2.18.2.2.1 | RowifEntry | not-accessible | mandatory | An interface entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.1 | ColumnifIndex | read-write | mandatory | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.2 | ColumnifDescr | read-write | mandatory | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the h… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.3 | ColumnifType | read-write | mandatory | The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.4 | ColumnifMtu | read-write | mandatory | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagr… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.5 | ColumnifSpeed | read-only | mandatory | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.6 | ColumnifPhysAddress | read-write | mandatory | This information is required for configuration only when BOOTP support is enabled in the TIGER configuration tool in order to properly create a bootptab record… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.7 | ColumnifAdminStatus | read-write | mandatory | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.8 | ColumnifOperStatus | read-only | mandatory | The current operational state of the interface. testing - indicates that no operational packets can be passed. up - normal operation down-L2 - down due to a le… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.9 | ColumnifLastChange | read-only | mandatory | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.10 | ColumnifInOctets | read-only | mandatory | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.11 | ColumnifInUcastPkts | read-only | mandatory | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.12 | ColumnifInNUcastPkts | read-only | mandatory | The number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.13 | ColumnifInDiscards | read-only | mandatory | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.14 | ColumnifInErrors | read-only | mandatory | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.15 | ColumnifInUnknownProtos | read-only | mandatory | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.16 | ColumnifOutOctets | read-only | mandatory | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.17 | ColumnifOutUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.18 | ColumnifOutNUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a non-unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addres… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.19 | ColumnifOutDiscards | read-only | mandatory | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.20 | ColumnifOutErrors | read-only | mandatory | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.21 | ColumnifOutQLen | read-only | mandatory | The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.1978.2.18.2.2.1.22 | ColumnifSpecific | read-only | mandatory | A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, … |
| 1.3.6.1.4.1.1978.2.18.2.2.1.23 | ColumnifInMulticastPkts | read-only | mandatory | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.24 | ColumnifInBroadcastPkts | read-only | mandatory | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.25 | ColumnifOutMulticastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.1978.2.18.2.2.1.26 | ColumnifOutBroadcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.1978.2.18.2.2.1.27 | ColumnifStateChangeTrapEnable | read-write | mandatory | Indicates whether ifStateChange traps should be generated for this interface. By default, this object should have the value enabled for interfaces which do not… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.28 | ColumnifConnectorPresent | read-only | mandatory | This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.29 | ColumnifClearStats | read-write | mandatory | When set to 'clear' all of the interface statistics are cleared to zero. It will also force a clearing of all protocol, and 'user' statistics that are related … |
| 1.3.6.1.4.1.1978.2.18.2.2.1.30 | ColumnifClearStatsTime | read-only | mandatory | The number of ticks when the Tiger last received a ifClearStats command. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.31 | ColumnifErrorRateTrapEnable | read-write | mandatory | Indicates whether ifErrorRate traps should be generated for this interface. In addition to enabling the trap via this object, thresholds must also be set. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.32 | ColumnifErrorRateInterval | read-write | mandatory | The amount of time over which any error rate is calculated. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.33 | ColumnifErrorInLowThreshold | read-write | mandatory | If the number of input errors drops below the low water mark (threshold) over the interval defined by 'ifErrorRateInterval' then a trap may be generated if ena… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.34 | ColumnifErrorInHighThreshold | read-write | mandatory | If the Low water mark (threshold) has been reached, this defines the other end of the hysterisis curve, when more than 'ifErrorInHighThreshold' number of error… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.35 | ColumnifErrorOutLowThreshold | read-write | mandatory | If the number of output errors drops below the low water mark (threshold) over the interval defined by 'ifErrorRateInterval' then a trap may be generated if en… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.36 | ColumnifErrorOutHighThreshold | read-write | mandatory | If the Low water mark (threshold) has been reached, this defines the other end of the hysterisis curve, when more than 'ifErrorOutHighThreshold' number of erro… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.37 | ColumnifErrType | read-only | mandatory | Informs the NMS of the reason for the ifErrorRate trap that was received. When read asynchronously, it also indicates the last known state of this interface en… |
| 1.3.6.1.4.1.1978.2.18.3 | Nodeip | |||
| 1.3.6.1.4.1.1978.2.18.3.1 | ScalaripForwarding | read-write | mandatory | The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP g… |
| 1.3.6.1.4.1.1978.2.18.3.2 | ScalaripDefaultTTL | read-write | mandatory | The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the tra… |
| 1.3.6.1.4.1.1978.2.18.3.3 | ScalaripInReceives | read-only | mandatory | The total number of input datagrams received from interfaces, including those received in error. |
| 1.3.6.1.4.1.1978.2.18.3.4 | ScalaripInHdrErrors | read-only | mandatory | The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live … |
| 1.3.6.1.4.1.1978.2.18.3.5 | ScalaripInAddrErrors | read-only | mandatory | The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. Th… |
| 1.3.6.1.4.1.1978.2.18.3.6 | ScalaripForwDatagrams | read-only | mandatory | The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward the… |
| 1.3.6.1.4.1.1978.2.18.3.7 | ScalaripInUnknownProtos | read-only | mandatory | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.1978.2.18.3.8 | ScalaripInDiscards | read-only | mandatory | The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buff… |
| 1.3.6.1.4.1.1978.2.18.3.9 | ScalaripInDelivers | read-only | mandatory | The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). |
| 1.3.6.1.4.1.1978.2.18.3.10 | ScalaripOutRequests | read-only | mandatory | The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not in… |
| 1.3.6.1.4.1.1978.2.18.3.11 | ScalaripOutDiscards | read-only | mandatory | The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for … |
| 1.3.6.1.4.1.1978.2.18.3.12 | ScalaripOutNoRoutes | read-only | mandatory | The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted… |
| 1.3.6.1.4.1.1978.2.18.3.13 | ScalaripReasmTimeout | read-write | mandatory | The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity. |
| 1.3.6.1.4.1.1978.2.18.3.14 | ScalaripReasmReqds | read-only | mandatory | The number of IP fragments received which needed to be reassembled at this entity. |
| 1.3.6.1.4.1.1978.2.18.3.15 | ScalaripReasmOKs | read-only | mandatory | The number of IP datagrams successfully re-assembled. |
| 1.3.6.1.4.1.1978.2.18.3.16 | ScalaripReasmFails | read-only | mandatory | The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of di… |
| 1.3.6.1.4.1.1978.2.18.3.17 | ScalaripFragOKs | read-only | mandatory | The number of IP datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.4.1.1978.2.18.3.18 | ScalaripFragFails | read-only | mandatory | The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment fl… |
| 1.3.6.1.4.1.1978.2.18.3.19 | ScalaripFragCreates | read-only | mandatory | The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. |
| 1.3.6.1.4.1.1978.2.18.3.20 | TableipAddrTable | not-accessible | mandatory | The table of addressing information relevant to this entity's IP addresses. |
| 1.3.6.1.4.1.1978.2.18.3.20.1 | RowipAddrEntry | not-accessible | mandatory | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.4.1.1978.2.18.3.20.1.1 | ColumnipAdEntAddr | read-write | mandatory | The IP address to which this entry's addressing information pertains. If this is a PPP port, an IP address of 0.0.0.0 signifies that IP address negotiation wil… |
| 1.3.6.1.4.1.1978.2.18.3.20.1.2 | ColumnipAdEntIfIndex | read-write | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.1978.2.18.3.20.1.3 | ColumnipAdEntNetMask | read-write | mandatory | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.1978.2.18.3.20.1.4 | ColumnipAdEntBcastAddr | read-write | mandatory | The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this… |
| 1.3.6.1.4.1.1978.2.18.3.20.1.5 | ColumnipAdEntReasmMaxSize | read-write | mandatory | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.4.1.1978.2.18.3.22 | TableipNetToMediaTable | not-accessible | mandatory | The IP Address Translation table used for mapping from IP addresses to physical addresses. |
| 1.3.6.1.4.1.1978.2.18.3.22.1 | RowipNetToMediaEntry | not-accessible | mandatory | Each entry contains one IpAddress to `physical' address equivalence. |
| 1.3.6.1.4.1.1978.2.18.3.22.1.1 | ColumnipNetToMediaIfIndex | read-write | mandatory | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.1978.2.18.3.22.1.2 | ColumnipNetToMediaPhysAddress | read-write | mandatory | The media-dependent `physical' address. |
| 1.3.6.1.4.1.1978.2.18.3.22.1.3 | ColumnipNetToMediaNetAddress | read-write | mandatory | The IpAddress corresponding to the media-dependent `physical' address. |
| 1.3.6.1.4.1.1978.2.18.3.22.1.4 | ColumnipNetToMediaType | read-write | mandatory | The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it e… |
| 1.3.6.1.4.1.1978.2.18.3.23 | ScalaripRoutingDiscards | read-only | mandatory | The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-u… |
| 1.3.6.1.4.1.1978.2.18.3.24 | ScalaripClearStats | read-write | mandatory | When set to 'clear' all of the ip/icmp/tcp/udp/ppp/snmp statistics are cleared to zero. When read, this object should always return 'cleared' indicating that t… |
| 1.3.6.1.4.1.1978.2.18.3.25 | ScalaripClearStatsTime | read-only | mandatory | The number of ticks when the Tiger last received a ipClearStats command. |
| 1.3.6.1.4.1.1978.2.18.3.26 | NodeipForward | |||
| 1.3.6.1.4.1.1978.2.18.3.26.1 | ScalaripForwardNumber | read-only | mandatory | The number of current ipForwardTable entries that are not invalid. |
| 1.3.6.1.4.1.1978.2.18.3.26.2 | TableipForwardTable | not-accessible | mandatory | This entity's IP Routing table. |
| 1.3.6.1.4.1.1978.2.18.3.26.2.1 | RowipForwardEntry | not-accessible | mandatory | A particular route to a particular destination, under a particular policy. |
| 1.3.6.1.4.1.1978.2.18.3.26.2.1.1 | ColumnipForwardDest | read-write | mandatory | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. This object may not take a Multicast (Class D) addres… |
| 1.3.6.1.4.1.1978.2.18.3.26.2.1.2 | ColumnipForwardMask | read-write | mandatory | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipForwardDest field. For those systems that do not… |
| 1.3.6.1.4.1.1978.2.18.3.26.2.1.4 | ColumnipForwardNextHop | read-write | mandatory | On remote routes, the address of the next system en route; Otherwise, 0.0.0.0. |
| 1.3.6.1.4.1.1978.2.18.3.26.2.1.5 | ColumnipForwardIfIndex | read-write | mandatory | The ifIndex value which identifies the local interface through which the next hop of this route should be reached. |
| 1.3.6.1.4.1.1978.2.18.3.26.2.1.11 | ColumnipForwardMetric1 | read-write | mandatory | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipForwardProto value. F… |
| 1.3.6.1.4.1.1978.2.18.3.26.2.1.12 | ColumnipForwardMetric2 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipForwardProto value. … |
| 1.3.6.1.4.1.1978.2.18.3.26.2.1.13 | ColumnipForwardMetric3 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipForwardProto value. … |
| 1.3.6.1.4.1.1978.2.18.3.26.2.1.14 | ColumnipForwardMetric4 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipForwardProto value. … |
| 1.3.6.1.4.1.1978.2.18.3.26.2.1.15 | ColumnipForwardMetric5 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipForwardProto value. … |
| 1.3.6.1.4.1.1978.2.18.3.26.3 | ScalaripForwardTrapControl | read-write | mandatory | If enabled, it allows the system to generate ipForward traps, when the routing table changes. |
| 1.3.6.1.4.1.1978.2.18.3.26.4 | ScalaripForwardTrapReason | read-only | mandatory | The reason that the ipRouteChange trap was generated. add - the entry was added. delete - the entry was removed. modified - the entry was modified. The metric … |
| 1.3.6.1.4.1.1978.2.18.4 | Nodeicmp | |||
| 1.3.6.1.4.1.1978.2.18.4.1 | ScalaricmpInMsgs | read-only | mandatory | The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors. |
| 1.3.6.1.4.1.1978.2.18.4.2 | ScalaricmpInErrors | read-only | mandatory | The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). |
| 1.3.6.1.4.1.1978.2.18.4.3 | ScalaricmpInDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages received. |
| 1.3.6.1.4.1.1978.2.18.4.4 | ScalaricmpInTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages received. |
| 1.3.6.1.4.1.1978.2.18.4.5 | ScalaricmpInParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages received. |
| 1.3.6.1.4.1.1978.2.18.4.6 | ScalaricmpInSrcQuenchs | read-only | mandatory | The number of ICMP Source Quench messages received. |
| 1.3.6.1.4.1.1978.2.18.4.7 | ScalaricmpInRedirects | read-only | mandatory | The number of ICMP Redirect messages received. |
| 1.3.6.1.4.1.1978.2.18.4.8 | ScalaricmpInEchos | read-only | mandatory | The number of ICMP Echo (request) messages received. |
| 1.3.6.1.4.1.1978.2.18.4.9 | ScalaricmpInEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages received. |
| 1.3.6.1.4.1.1978.2.18.4.10 | ScalaricmpInTimestamps | read-only | mandatory | The number of ICMP Timestamp (request) messages received. |
| 1.3.6.1.4.1.1978.2.18.4.11 | ScalaricmpInTimestampReps | read-only | mandatory | The number of ICMP Timestamp Reply messages received. |
| 1.3.6.1.4.1.1978.2.18.4.12 | ScalaricmpInAddrMasks | read-only | mandatory | The number of ICMP Address Mask Request messages received. |
| 1.3.6.1.4.1.1978.2.18.4.13 | ScalaricmpInAddrMaskReps | read-only | mandatory | The number of ICMP Address Mask Reply messages received. |
| 1.3.6.1.4.1.1978.2.18.4.14 | ScalaricmpOutMsgs | read-only | mandatory | The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. |
| 1.3.6.1.4.1.1978.2.18.4.15 | ScalaricmpOutErrors | read-only | mandatory | The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include erro… |
| 1.3.6.1.4.1.1978.2.18.4.16 | ScalaricmpOutDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages sent. |
| 1.3.6.1.4.1.1978.2.18.4.17 | ScalaricmpOutTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages sent. |
| 1.3.6.1.4.1.1978.2.18.4.18 | ScalaricmpOutParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages sent. |
| 1.3.6.1.4.1.1978.2.18.4.19 | ScalaricmpOutSrcQuenchs | read-only | mandatory | The number of ICMP Source Quench messages sent. |
| 1.3.6.1.4.1.1978.2.18.4.20 | ScalaricmpOutRedirects | read-only | mandatory | The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. |
| 1.3.6.1.4.1.1978.2.18.4.21 | ScalaricmpOutEchos | read-only | mandatory | The number of ICMP Echo (request) messages sent. |
| 1.3.6.1.4.1.1978.2.18.4.22 | ScalaricmpOutEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages sent. |
| 1.3.6.1.4.1.1978.2.18.4.23 | ScalaricmpOutTimestamps | read-only | mandatory | The number of ICMP Timestamp (request) messages sent. |
| 1.3.6.1.4.1.1978.2.18.4.24 | ScalaricmpOutTimestampReps | read-only | mandatory | The number of ICMP Timestamp Reply messages sent. |
| 1.3.6.1.4.1.1978.2.18.4.25 | ScalaricmpOutAddrMasks | read-only | mandatory | The number of ICMP Address Mask Request messages sent. |
| 1.3.6.1.4.1.1978.2.18.4.26 | ScalaricmpOutAddrMaskReps | read-only | mandatory | The number of ICMP Address Mask Reply messages sent. |
| 1.3.6.1.4.1.1978.2.18.5 | Nodetcp | |||
| 1.3.6.1.4.1.1978.2.18.5.1 | ScalartcpRtoAlgorithm | read-only | mandatory | The algorithm used to determine the timeout value used for retransmitting unacknowledged octets. |
| 1.3.6.1.4.1.1978.2.18.5.2 | ScalartcpRtoMin | read-only | mandatory | The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type d… |
| 1.3.6.1.4.1.1978.2.18.5.3 | ScalartcpRtoMax | read-only | mandatory | The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type d… |
| 1.3.6.1.4.1.1978.2.18.5.4 | ScalartcpMaxConn | read-only | mandatory | The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should con… |
| 1.3.6.1.4.1.1978.2.18.5.5 | ScalartcpActiveOpens | read-only | mandatory | The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state. |
| 1.3.6.1.4.1.1978.2.18.5.6 | ScalartcpPassiveOpens | read-only | mandatory | The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state. |
| 1.3.6.1.4.1.1978.2.18.5.7 | ScalartcpAttemptFails | read-only | mandatory | The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of … |
| 1.3.6.1.4.1.1978.2.18.5.8 | ScalartcpEstabResets | read-only | mandatory | The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state. |
| 1.3.6.1.4.1.1978.2.18.5.9 | ScalartcpCurrEstab | read-only | mandatory | The number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT. |
| 1.3.6.1.4.1.1978.2.18.5.10 | ScalartcpInSegs | read-only | mandatory | The total number of segments received, including those received in error. This count includes segments received on currently established connections. |
| 1.3.6.1.4.1.1978.2.18.5.11 | ScalartcpOutSegs | read-only | mandatory | The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets. |
| 1.3.6.1.4.1.1978.2.18.5.12 | ScalartcpRetransSegs | read-only | mandatory | The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets. |
| 1.3.6.1.4.1.1978.2.18.5.13 | TabletcpConnTable | not-accessible | mandatory | A table containing TCP connection-specific information. |
| 1.3.6.1.4.1.1978.2.18.5.13.1 | RowtcpConnEntry | not-accessible | mandatory | Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection make… |
| 1.3.6.1.4.1.1978.2.18.5.13.1.1 | ColumntcpConnState | read-write | mandatory | The state of this TCP connection. NOTE: The following paragraphs are from rfc1213 and Tiger does not currently support this. The only value which may be set by… |
| 1.3.6.1.4.1.1978.2.18.5.13.1.2 | ColumntcpConnLocalAddress | read-only | mandatory | The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface assoc… |
| 1.3.6.1.4.1.1978.2.18.5.13.1.3 | ColumntcpConnLocalPort | read-only | mandatory | The local port number for this TCP connection. |
| 1.3.6.1.4.1.1978.2.18.5.13.1.4 | ColumntcpConnRemAddress | read-only | mandatory | The remote IP address for this TCP connection. |
| 1.3.6.1.4.1.1978.2.18.5.13.1.5 | ColumntcpConnRemPort | read-only | mandatory | The remote port number for this TCP connection. |
| 1.3.6.1.4.1.1978.2.18.5.14 | ScalartcpInErrs | read-only | mandatory | The total number of segments received in error (e.g., bad TCP checksums). |
| 1.3.6.1.4.1.1978.2.18.5.15 | ScalartcpOutRsts | read-only | mandatory | The number of TCP segments sent containing the RST flag. |
| 1.3.6.1.4.1.1978.2.18.5.16 | ScalartcpRetransAttempts | read-write | mandatory | The number of TCP retransmision attempts before the socket connection is declared down. The interval between attempts is fixed at approximately 7 seconds. This… |
| 1.3.6.1.4.1.1978.2.18.5.17 | ScalartcpKAInterval | read-write | mandatory | The interval of time, expressed in seconds between keepalive packets. Keepalive packets are generated when there is no other socket traffic. Although the opera… |
| 1.3.6.1.4.1.1978.2.18.5.18 | ScalartcpKAAttempts | read-write | mandatory | The number of successive TCP keepalive packets sent with no reply at tcpKAIntervals before the socket connection is declared down. Although the operation of ke… |
| 1.3.6.1.4.1.1978.2.18.6 | Nodeudp | |||
| 1.3.6.1.4.1.1978.2.18.6.1 | ScalarudpInDatagrams | read-only | mandatory | The total number of UDP datagrams delivered to UDP users. |
| 1.3.6.1.4.1.1978.2.18.6.2 | ScalarudpNoPorts | read-only | mandatory | The total number of received UDP datagrams for which there was no application at the destination port. |
| 1.3.6.1.4.1.1978.2.18.6.3 | ScalarudpInErrors | read-only | mandatory | The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. |
| 1.3.6.1.4.1.1978.2.18.6.4 | ScalarudpOutDatagrams | read-only | mandatory | The total number of UDP datagrams sent from this entity. |
| 1.3.6.1.4.1.1978.2.18.6.5 | TableudpTable | not-accessible | mandatory | A table containing UDP listener information. |
| 1.3.6.1.4.1.1978.2.18.6.5.1 | RowudpEntry | not-accessible | mandatory | Information about a particular current UDP listener. |
| 1.3.6.1.4.1.1978.2.18.6.5.1.1 | ColumnudpLocalAddress | read-only | mandatory | The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, t… |
| 1.3.6.1.4.1.1978.2.18.6.5.1.2 | ColumnudpLocalPort | read-only | mandatory | The local port number for this UDP listener. |
| 1.3.6.1.4.1.1978.2.18.7 | Nodesnmp | |||
| 1.3.6.1.4.1.1978.2.18.7.1 | ScalarsnmpInPkts | read-only | mandatory | The total number of Messages delivered to the SNMP entity from the transport service. |
| 1.3.6.1.4.1.1978.2.18.7.2 | ScalarsnmpOutPkts | read-only | mandatory | The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service. |
| 1.3.6.1.4.1.1978.2.18.7.3 | ScalarsnmpInBadVersions | read-only | mandatory | The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version. |
| 1.3.6.1.4.1.1978.2.18.7.4 | ScalarsnmpInBadCommunityNames | read-only | mandatory | The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity. |
| 1.3.6.1.4.1.1978.2.18.7.5 | ScalarsnmpInBadCommunityUses | read-only | mandatory | The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named i… |
| 1.3.6.1.4.1.1978.2.18.7.6 | ScalarsnmpInASNParseErrs | read-only | mandatory | The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages. |
| 1.3.6.1.4.1.1978.2.18.7.8 | ScalarsnmpInTooBigs | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'. |
| 1.3.6.1.4.1.1978.2.18.7.9 | ScalarsnmpInNoSuchNames | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'. |
| 1.3.6.1.4.1.1978.2.18.7.10 | ScalarsnmpInBadValues | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'. |
| 1.3.6.1.4.1.1978.2.18.7.11 | ScalarsnmpInReadOnlys | read-only | mandatory | The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be… |
| 1.3.6.1.4.1.1978.2.18.7.12 | ScalarsnmpInGenErrs | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'. |
| 1.3.6.1.4.1.1978.2.18.7.13 | ScalarsnmpInTotalReqVars | read-only | mandatory | The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Ne… |
| 1.3.6.1.4.1.1978.2.18.7.14 | ScalarsnmpInTotalSetVars | read-only | mandatory | The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs. |
| 1.3.6.1.4.1.1978.2.18.7.15 | ScalarsnmpInGetRequests | read-only | mandatory | The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.4.1.1978.2.18.7.16 | ScalarsnmpInGetNexts | read-only | mandatory | The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.4.1.1978.2.18.7.17 | ScalarsnmpInSetRequests | read-only | mandatory | The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.4.1.1978.2.18.7.18 | ScalarsnmpInGetResponses | read-only | mandatory | The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.4.1.1978.2.18.7.19 | ScalarsnmpInTraps | read-only | mandatory | The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.4.1.1978.2.18.7.20 | ScalarsnmpOutTooBigs | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.' |
| 1.3.6.1.4.1.1978.2.18.7.21 | ScalarsnmpOutNoSuchNames | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'. |
| 1.3.6.1.4.1.1978.2.18.7.22 | ScalarsnmpOutBadValues | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'. |
| 1.3.6.1.4.1.1978.2.18.7.24 | ScalarsnmpOutGenErrs | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'. |
| 1.3.6.1.4.1.1978.2.18.7.25 | ScalarsnmpOutGetRequests | read-only | mandatory | The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.4.1.1978.2.18.7.26 | ScalarsnmpOutGetNexts | read-only | mandatory | The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.4.1.1978.2.18.7.27 | ScalarsnmpOutSetRequests | read-only | mandatory | The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.4.1.1978.2.18.7.28 | ScalarsnmpOutGetResponses | read-only | mandatory | The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.4.1.1978.2.18.7.29 | ScalarsnmpOutTraps | read-only | mandatory | The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.4.1.1978.2.18.7.30 | ScalarsnmpEnableAuthenTraps | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration informatio… |
| 1.3.6.1.4.1.1978.2.18.8 | NodesysTraps | |||
| 1.3.6.1.4.1.1978.2.18.8.1 | NodeifStateChange | A linkStateChange trap signifies that the sending protocol entity recognizes a change in one of the communication links represented in the agent's configuratio… | ||
| 1.3.6.1.4.1.1978.2.18.8.2 | NodeifErrorRate | A linkErrorRate trap signifies that the sending protocol entity discovered an error rate that in one of the communication links represented in the agent's conf… | ||
| 1.3.6.1.4.1.1978.2.18.8.3 | NodeipRouteChange | An ipRouteChange trap signifies that the IP Forwarding table has been changed. An entry was added, deleted or modified. | ||
| 1.3.6.1.4.1.1978.2.18.9 | NodepartyMIB | |||
| 1.3.6.1.4.1.1978.2.18.9.1 | TablepartyCommTable | not-accessible | mandatory | The SNMP community database. |
| 1.3.6.1.4.1.1978.2.18.9.1.1 | RowpartyCommEntry | not-accessible | mandatory | Locally held information about a particular SNMP community. |
| 1.3.6.1.4.1.1978.2.18.9.1.1.1 | ColumnpartyCommIndex | read-write | mandatory | A unique value for each SNMPv2 party. The value for each SNMPv2 party must remain constant at least from one re-initialization of the entity's network manageme… |
| 1.3.6.1.4.1.1978.2.18.9.1.1.2 | ColumnpartyCommunity | read-write | mandatory | The SNMP community associated with this entry. |
| 1.3.6.1.4.1.1978.2.18.9.1.1.3 | ColumnpartyAccess | read-write | mandatory | Indicates the access rights of this community. |
| 1.3.6.1.4.1.1978.2.18.9.2 | TablepartyTrapTable | not-accessible | mandatory | The SNMP trap destination database. |
| 1.3.6.1.4.1.1978.2.18.9.2.1 | RowpartyTrapEntry | not-accessible | mandatory | Locally held information about a particular SNMP trap destination. |
| 1.3.6.1.4.1.1978.2.18.9.2.1.1 | ColumnpartyTrapIndex | read-write | mandatory | A unique value for each SNMP trap destination entry. |
| 1.3.6.1.4.1.1978.2.18.9.2.1.2 | ColumnpartyTAddress | read-write | mandatory | The IP address by which the party receives network management traffic. |
| 1.3.6.1.4.1.1978.2.18.9.2.1.3 | ColumnpartyTPort | read-write | mandatory | The port address by which the party receives network management traffic. |
| 1.3.6.1.4.1.1978.2.18.9.2.1.4 | ColumnpartyTDomain | read-write | mandatory | Indicates the kind of transport service by which the party receives network management traffic. |
| 1.3.6.1.4.1.1978.2.18.9.2.1.5 | ColumnpartyTCommunity | read-write | mandatory | The SNMP community used in the trap response to this entries address. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PhysAddress | OCTET STRING |