VPLS-GENERIC-MIB
60 objects
Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). The initial version of this MIB module was published in RFC 7257; for full legal notices see the RFC itself. This MIB module contains generic managed object definitions for Virtual Private LAN Service as defined in RFC 4761 and RFC 4762. This MIB module enables the use of any underlying pseudowire network.
Imported Objects
| PW-STD-MIB | -- RFC 3411 pwIndex |
| SNMP-FRAMEWORK-MIB | -- RFC 2579 SnmpAdminString |
| SNMPv2-CONF | -- RFC 2578 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission Unsigned32 |
| SNMPv2-TC | -- RFC 2580 TruthValue RowStatus StorageType TEXTUAL-CONVENTION |
| VPN-TC-STD-MIB | -- RFC 5601 VPNIdOrZero |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.274 | IdentityvplsGenericMIB | Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with o… | ||
| 1.3.6.1.2.1.10.274.0 | NodevplsNotifications | |||
| 1.3.6.1.2.1.10.274.0.1 | NotificationvplsStatusChanged | current | The vplsStatusChanged notification is generated when there is a change in the administrative or operating status of a VPLS service. The object instances includ… | |
| 1.3.6.1.2.1.10.274.0.2 | NotificationvplsFwdFullAlarmRaised | current | The vplsFwdFullAlarmRaised notification is generated when the utilization of the Forwarding database is above the value specified by vplsConfigFwdFullHighWater… | |
| 1.3.6.1.2.1.10.274.0.3 | NotificationvplsFwdFullAlarmCleared | current | The vplsFwdFullAlarmCleared notification is generated when the utilization of the Forwarding database is below the value specified by vplsConfigFwdFullLowWater… | |
| 1.3.6.1.2.1.10.274.1 | NodevplsObjects | |||
| 1.3.6.1.2.1.10.274.1.1 | ScalarvplsConfigIndexNext | read-only | current | This object contains an appropriate value to be used for vplsConfigIndex when creating entries in the vplsConfigTable. The value 0 indicates that no unassigned… |
| 1.3.6.1.2.1.10.274.1.2 | TablevplsConfigTable | not-accessible | current | This table specifies information for configuring and monitoring Virtual Private LAN Service (VPLS). |
| 1.3.6.1.2.1.10.274.1.2.1 | RowvplsConfigEntry | not-accessible | current | A row in this table represents a Virtual Private LAN Service (VPLS) in a packet network. It is indexed by vplsConfigIndex, which uniquely identifies a single V… |
| 1.3.6.1.2.1.10.274.1.2.1.1 | ColumnvplsConfigIndex | not-accessible | current | Unique index for the conceptual row identifying a VPLS service. |
| 1.3.6.1.2.1.10.274.1.2.1.2 | ColumnvplsConfigName | read-create | current | A textual name of the VPLS. If there is no local name, or this object is otherwise not applicable, then this object MUST contain a zero-length octet string. |
| 1.3.6.1.2.1.10.274.1.2.1.3 | ColumnvplsConfigDescr | read-create | current | A textual string containing information about the VPLS service. If there is no information for this VPLS service, then this object MUST contain a zero-length o… |
| 1.3.6.1.2.1.10.274.1.2.1.4 | ColumnvplsConfigAdminStatus | read-create | current | The desired administrative state of the VPLS service. If the administrative status of the VPLS service is changed to enabled, then this service is able to util… |
| 1.3.6.1.2.1.10.274.1.2.1.6 | ColumnvplsConfigMacLearning | read-create | current | This object specifies if MAC Learning is enabled in this service. If this object is true then MAC Learning is enabled. If false, then MAC Learning is disabled. |
| 1.3.6.1.2.1.10.274.1.2.1.7 | ColumnvplsConfigDiscardUnknownDest | read-create | current | If the value of this object is 'true', then frames received with an unknown destination MAC are discarded in this VPLS. If 'false', then the packets are proces… |
| 1.3.6.1.2.1.10.274.1.2.1.8 | ColumnvplsConfigMacAging | read-create | current | If the value of this object is 'true', then the MAC aging process is enabled in this VPLS. If 'false', then the MAC aging process is disabled. |
| 1.3.6.1.2.1.10.274.1.2.1.10 | ColumnvplsConfigFwdFullHighWatermark | read-create | current | This object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmRaised notification will be sent. The valu… |
| 1.3.6.1.2.1.10.274.1.2.1.11 | ColumnvplsConfigFwdFullLowWatermark | read-create | current | This object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmCleared notification will be sent. The val… |
| 1.3.6.1.2.1.10.274.1.2.1.12 | ColumnvplsConfigRowStatus | read-create | current | For creating, modifying, and deleting this row. All other objects in this row must be set to valid values before this object can be set to active(1). None of t… |
| 1.3.6.1.2.1.10.274.1.2.1.13 | ColumnvplsConfigMtu | read-create | current | The value of this object specifies the MTU of this VPLS instance. This can be used to limit the MTU to a value lower than the MTU supported by the associated p… |
| 1.3.6.1.2.1.10.274.1.2.1.14 | ColumnvplsConfigVpnId | read-create | current | This objects indicates the IEEE 802-1990 VPN ID of the associated VPLS service. |
| 1.3.6.1.2.1.10.274.1.2.1.15 | ColumnvplsConfigStorageType | read-create | current | This variable indicates the storage type for this row. |
| 1.3.6.1.2.1.10.274.1.2.1.16 | ColumnvplsConfigSignalingType | read-create | current | Desired signaling type of the VPLS service. If the value of this object is ldp(1), then a corresponding entry in vplsLdpConfigTable is required. If the value o… |
| 1.3.6.1.2.1.10.274.1.3 | TablevplsStatusTable | not-accessible | current | This table provides information for monitoring Virtual Private LAN Service (VPLS). |
| 1.3.6.1.2.1.10.274.1.3.1 | RowvplsStatusEntry | not-accessible | current | A row in this table represents a Virtual Private LAN Service (VPLS) in a packet network. It is indexed by vplsConfigIndex, which uniquely identifies a single V… |
| 1.3.6.1.2.1.10.274.1.3.1.1 | ColumnvplsStatusOperStatus | read-only | current | The current operational state of this VPLS service. |
| 1.3.6.1.2.1.10.274.1.3.1.2 | ColumnvplsStatusPeerCount | read-only | current | This objects specifies the number of peers (pseudowires) present in this VPLS instance. |
| 1.3.6.1.2.1.10.274.1.4 | TablevplsPwBindTable | not-accessible | current | This table provides an association between a VPLS service and the corresponding pseudowires. A service can have more than one pseudowire association. Pseudowir… |
| 1.3.6.1.2.1.10.274.1.4.1 | RowvplsPwBindEntry | not-accessible | current | Each row represents an association between a VPLS instance and a pseudowire defined in the pwTable. Each index is unique in describing an entry in this table. … |
| 1.3.6.1.2.1.10.274.1.4.1.1 | ColumnvplsPwBindConfigType | read-create | current | The value of this object indicates whether the pseudowire Binding was created via SNMP/Console or via Auto-Discovery. The value of this object must be specifie… |
| 1.3.6.1.2.1.10.274.1.4.1.2 | ColumnvplsPwBindType | read-create | current | The value of this object indicates whether the pseudowire Binding is of type mesh or spoke. The value of this object must be specified when the row is created … |
| 1.3.6.1.2.1.10.274.1.4.1.3 | ColumnvplsPwBindRowStatus | read-create | current | For creating, modifying, and deleting this row. All other objects in this row must be set to valid values before this object can be set to active(1). None of t… |
| 1.3.6.1.2.1.10.274.1.4.1.4 | ColumnvplsPwBindStorageType | read-create | current | This variable indicates the storage type for this row. |
| 1.3.6.1.2.1.10.274.1.5 | TablevplsBgpADConfigTable | not-accessible | current | This table specifies information for configuring BGP Auto-Discovery parameters for a given VPLS service. |
| 1.3.6.1.2.1.10.274.1.5.1 | RowvplsBgpADConfigEntry | not-accessible | current | A row in this table indicates that BGP based Auto- Discovery is in use for this instance of VPLS. A row in this table is indexed by vplsConfigIndex, which uniq… |
| 1.3.6.1.2.1.10.274.1.5.1.1 | ColumnvplsBgpADConfigRouteDistinguisher | read-create | current | The route distinguisher for this VPLS. See RFC 4364 for a complete definition of a route distinguisher. For more details on use of a route distinguisher for a … |
| 1.3.6.1.2.1.10.274.1.5.1.2 | ColumnvplsBgpADConfigPrefix | read-create | current | In case of auto-discovery, the default prefix advertised is the IP address of the loopback. In case the user wants to override the loopback address, vplsBgpADC… |
| 1.3.6.1.2.1.10.274.1.5.1.3 | ColumnvplsBgpADConfigVplsId | read-create | current | VplsId is a unique identifier for all Virtual Switch Instances (VSIs) belonging to the same VPLS. It is advertised as an extended community. |
| 1.3.6.1.2.1.10.274.1.5.1.4 | ColumnvplsBgpADConfigRowStatus | read-create | current | For creating, modifying, and deleting this row. All other objects in this row must be set to valid values before this object can be set to active(1). None of t… |
| 1.3.6.1.2.1.10.274.1.5.1.5 | ColumnvplsBgpADConfigStorageType | read-create | current | This variable indicates the storage type for this row. |
| 1.3.6.1.2.1.10.274.1.6 | TablevplsBgpRteTargetTable | not-accessible | current | This table specifies the list of Route Targets imported or exported by BGP during auto-discovery of VPLS. |
| 1.3.6.1.2.1.10.274.1.6.1 | RowvplsBgpRteTargetEntry | not-accessible | current | An entry in this table specifies the value of the Route Target being used by BGP. Depending on the value of vplsBgpRteTargetType, a Route Target might be expor… |
| 1.3.6.1.2.1.10.274.1.6.1.1 | ColumnvplsBgpRteTargetIndex | not-accessible | current | This index, along with vplsConfigIndex, identifies one entry in the vplsBgpRteTargetTable. By keeping vplsConfigIndex constant and using a new value of vplsBgp… |
| 1.3.6.1.2.1.10.274.1.6.1.2 | ColumnvplsBgpRteTargetRTType | read-create | current | Used to define the type of a Route Target usage. Route Targets can be specified to be imported, exported, or both. For a complete definition of a Route Target,… |
| 1.3.6.1.2.1.10.274.1.6.1.3 | ColumnvplsBgpRteTargetRT | read-create | current | The Route Target associated with the VPLS service. For more details on use of Route Targets for a VPLS service, see RFC 4761. |
| 1.3.6.1.2.1.10.274.1.6.1.4 | ColumnvplsBgpRteTargetRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. All other objects in this row must be set to valid values before this object can be… |
| 1.3.6.1.2.1.10.274.1.6.1.5 | ColumnvplsBgpRteTargetStorageType | read-create | current | This variable indicates the storage type for this row. |
| 1.3.6.1.2.1.10.274.1.7 | ScalarvplsStatusNotifEnable | read-write | current | If this object is set to true(1), then it enables the emission of a vplsStatusChanged notification; otherwise, this notification is not emitted. |
| 1.3.6.1.2.1.10.274.1.8 | ScalarvplsNotificationMaxRate | read-write | current | This object indicates the maximum number of notifications issued per second. If events occur more rapidly, the implementation may simply fail to emit these not… |
| 1.3.6.1.2.1.10.274.2 | NodevplsConformance | |||
| 1.3.6.1.2.1.10.274.2.1 | NodevplsCompliances | |||
| 1.3.6.1.2.1.10.274.2.1.1 | CompliancevplsModuleFullCompliance | current | Compliance requirement for implementations that provide full support for VPLS-GENERIC-MIB. Such devices can then be monitored and configured using this MIB mod… | |
| 1.3.6.1.2.1.10.274.2.1.2 | CompliancevplsModuleReadOnlyCompliance | read-only | current | Compliance requirement for implementations that only provide read-only support for VPLS-GENERIC-MIB. Such devices can then be monitored but cannot be configure… |
| 1.3.6.1.2.1.10.274.2.2 | NodevplsGroups | |||
| 1.3.6.1.2.1.10.274.2.2.1 | GroupvplsGroup | current | The group of objects supporting management of L2VPN VPLS services | |
| 1.3.6.1.2.1.10.274.2.2.2 | GroupvplsPwBindGroup | current | The group of objects supporting management of pseudowire (PW) Binding to VPLS. | |
| 1.3.6.1.2.1.10.274.2.2.3 | GroupvplsNotificationGroup | current | The group of notifications supporting the Notifications generated for VPLS services. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VplsBgpRouteDistinguisher | OCTET STRING(SIZE (0..256)) | current | Syntax for a route distinguisher that matches the definition in RFC 4364. For a complete definition of a route distinguisher, see RFC 4364. For more details on use of a route distinguisher for a VPLS service, see RFC 47… |
| VplsBgpRouteTarget | OCTET STRING(SIZE (0..256)) | current | Syntax for a Route Target that matches the definition in RFC 4364. For a complete definition of a Route Target, see RFC 4364. |
| VplsBgpRouteTargetType | INTEGER { import(1), export(2), both(3) } | current | Used to define the type of a Route Target usage. Route Targets can be specified to be imported, exported, or both. For a complete definition of a Route Target, see RFC 4364. |