ZTE-AN-XDSL2-MIBII
591 objects
This MIB defines managed objects of zte xDSL mgmt .
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902 | Nodezte | |||
| 1.3.6.1.4.1.3902.1015 | NodezxAn | |||
| 1.3.6.1.4.1.3902.1015.1001 | IdentityzxAnXdsl2Mib | This MIB defines managed objects of zte xDSL mgmt . | ||
| 1.3.6.1.4.1.3902.1015.1001.1 | NodezxAnXdsl2Objects | |||
| 1.3.6.1.4.1.3902.1015.1001.1.1 | NodezxAnXdsl2GlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.1001.1.1.1 | ScalarzxAnXdsl2Capabilities | read-only | current | The management capabilities of VDSL. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means extend pro… |
| 1.3.6.1.4.1.3902.1015.1001.1.2 | NodezxAnXdsl2Line | |||
| 1.3.6.1.4.1.3902.1015.1001.1.2.10 | TablezxAnXdsl2LnTable | not-accessible | current | The table zxAnXdsl2LnTable contains configuration, command and status parameters of the VDSL2/ADSL/ADSL2 or ADSL2+ line. The index of this table is an interfac… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1 | RowzxAnXdsl2LnEntry | not-accessible | current | The table zxAnXdsl2LnTable contains configuration, commands and status parameters of the VDSL2/ADSL/ADSL2 or ADSL2+ line. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.1 | ColumnzxAnXdsl2LnCh1DsDataRateConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable), which applies for this line. This ob… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.2 | ColumnzxAnXdsl2LnCh2DsDataRateConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable), which applies for this line. This ob… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.3 | ColumnzxAnXdsl2LnCh3DsDataRateConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable), which applies for this line. This ob… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.4 | ColumnzxAnXdsl2LnCh4DsDataRateConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable), which applies for this line. This ob… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.5 | ColumnzxAnXdsl2LnCh1UsDataRateConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable), which applies for this line. This ob… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.6 | ColumnzxAnXdsl2LnCh2UsDataRateConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable), which applies for this line. This ob… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.7 | ColumnzxAnXdsl2LnCh3UsDataRateConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable), which applies for this line. This ob… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.8 | ColumnzxAnXdsl2LnCh4UsDataRateConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable), which applies for this line. This ob… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.9 | ColumnzxAnXdsl2LnSpectrumConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Line Spectrum Profile Table, (zxAnXdsl2SpectrumConfPrfTable), which applies for this line. This object… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.10 | ColumnzxAnXdsl2LnDpboConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Line Dpbo Profile Table, (zxAnXdsl2DpboConfPrfTable), which applies for this line. This object MUST be… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.11 | ColumnzxAnXdsl2LnUpboConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Line Upbo Profile Table, (zxAnXdsl2UpboConfPrfTable), which applies for this line. This object MUST be… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.12 | ColumnzxAnXdsl2LnSnrMarginConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Noise Margin Profile Table, (zxAnXdsl2SnrMarginConfPrfTable), which applies for this line. This object… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.13 | ColumnzxAnXdsl2LnCh1DelayInpConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable), which applies for this line. This object… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.14 | ColumnzxAnXdsl2LnCh2DelayInpConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable), which applies for this line. This object… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.15 | ColumnzxAnXdsl2LnCh3DelayInpConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable), which applies for this line. This object… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.16 | ColumnzxAnXdsl2LnCh4DelayInpConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable), which applies for this line. This object… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.17 | ColumnzxAnXdsl2LnRfiConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 RFI Profile Table, (zxAnXdsl2RfiConfPrfTable), which applies for this line. This object MUST be mainta… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.18 | ColumnzxAnXdsl2LnVirtualNoiseConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Virtual Noise Profile Table, (zxAnXdsl2VirtualNoiseConfPrfTable), which applies for this line. This ob… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.19 | ColumnzxAnXdsl2LnAlmThreshPrfName | read-write | current | The value of this object identifies the row in the xDSL2 Line Alarm Configuration Profile Table, (zxAnXdsl2LnAlarmConfPrfTable), which applies to this line. Th… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.20 | ColumnzxAnXdsl2LnCmndConfPmsf | read-write | current | Command:Power management state forced (PMSF). Defines the line states to be forced by the near-end xTU on this line. The various possible values are: l3toL0 (0… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.21 | ColumnzxAnXdsl2LnCmndConfLdsf | read-write | current | Command:Loop diagnostics mode forced (LDSF). Defines whether the line should be forced into the loop diagnostics mode by the near-end xTU on this line or only … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.22 | ColumnzxAnXdsl2LnCmndConfLdsfFailReason | read-only | current | Command:The status of the recent occasion the Loop diagnostics mode forced (LDSF) was issued for the associated line. Possible values are: none (1) - The defau… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.23 | ColumnzxAnXdsl2LnCmndConfBpsc | read-write | current | Command:Request a bits per sub-carrier measurement to be made. A request for a bits per sub-carrier measurement is made by setting this attribute to the value … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.24 | ColumnzxAnXdsl2LnCmndConfBpscFailReason | read-only | current | Command:The status of the most recent bits per sub-carrier measurement request issued for the associated line. Possible values are: none (1) - The default valu… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.25 | ColumnzxAnXdsl2LnCmndConfBpscReqCount | read-only | current | Command:Measurement request counter. This counter is incremented by one every time a request for a measurement is made. A measurement request is made by settin… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.26 | ColumnzxAnXdsl2LnCmndAutomodeColdStart | read-write | current | Command: Automode cold start forced. This parameter is defined in order to improve testing of the performance of xTUs supporting automode when it is enabled in… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.27 | ColumnzxAnXdsl2LnCmndConfReset | read-write | current | Command: Request a line reset to occur. If this attribute is set to the value of reset(2), then force the line to reset ( i.e. the modems will retrain ). When … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.28 | ColumnzxAnXdsl2LnStatusXtuTransSys | read-only | current | The xTU Transmission System (xTS) in use. It is coded in a bit-map representation with one bit set to '1' (the selected coding for the DSL line). This paramete… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.29 | ColumnzxAnXdsl2LnStatusPwrMngState | read-only | current | The current power management state. One of four possible power management states: L0 - Synchronized and full transmission (i.e., Showtime), L1 - Low Power with… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.30 | ColumnzxAnXdsl2LnStatusInitResult | read-only | current | Indicates the result of the last full initialization performed on the line. It is an enumeration type with the following values: noFail(0), configError(1), con… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.31 | ColumnzxAnXdsl2LnStatusLastStateDs | read-only | current | The last successful transmitted initialization state in the downstream direction in the last full initialization performed on the line. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.32 | ColumnzxAnXdsl2LnStatusLastStateUs | read-only | current | The last successful transmitted initialization state in the upstream direction in the last full initialization performed on the line. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.33 | ColumnzxAnXdsl2LnStatusXtur | read-only | current | Indicates current state (existing failures) of the xTU-R. This is a bit-map of possible conditions. This BITS structure can report the following failures: noDe… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.34 | ColumnzxAnXdsl2LnStatusXtuc | read-only | current | Indicates current state (existing failures) of the xTU-C. This is a bit-map of possible conditions. This BITS structure can report the following failures: noDe… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.35 | ColumnzxAnXdsl2LnStatusAttainRateDs | read-only | current | Maximum Attainable Data Rate Downstream. The maximum downstream net data rate currently attainable by the xTU-C transmitter and the xTU-R receiver, coded in bi… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.36 | ColumnzxAnXdsl2LnStatusAttainRateUs | read-only | current | Maximum Attainable Data Rate Upstream. The maximum upstream net data rate currently attainable by the xTU-R transmitter and the xTU-C receiver, coded in bit/s. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.37 | ColumnzxAnXdsl2LnStatusActPsdDs | read-only | current | Actual Power Spectrum Density (PSD) Downstream. The average downstream transmit PSD over the sub-carriers used for downstream. It ranges from -900 to 0 units o… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.38 | ColumnzxAnXdsl2LnStatusActPsdUs | read-only | current | Actual Power Spectrum Density (PSD) Upstream. The average upstream transmit PSD over the sub-carriers used for upstream. It ranges from -900 to 0 units of 0.1 … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.39 | ColumnzxAnXdsl2LnStatusActAtpDs | read-only | current | Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.40 | ColumnzxAnXdsl2LnStatusActAtpUs | read-only | current | Actual Aggregate Transmit Power Upstream. The total amount of transmit power delivered by the xTU-R at the U-R reference point, at the instant of measurement. … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.41 | ColumnzxAnXdsl2LnStatusActProfile | read-only | current | Actual Standard Profile used by this connection. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.42 | ColumnzxAnXdsl2LnStatusActLimitMask | read-only | current | The Limit PSD mask and band plan in use. The configuration parameter xdsl2LConfPrfLimitMask defines the set of allowed G.993.2 limit PSD masks. This parameter … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.43 | ColumnzxAnXdsl2LnStatusActUs0Mask | read-only | current | The US0 PSD mask in use. The configuration parameter xdsl2LConfPrfUs0Mask defines the set of allowed US0 PSD masks. This parameter indicates the US0 PSD mask i… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.44 | ColumnzxAnXdsl2LnStatusActSnrModeDs | read-only | current | This parameter indicates if the transmitter referred virtual noise is active on the line in the downstream direction. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.45 | ColumnzxAnXdsl2LnStatusActSnrModeUs | read-only | current | This parameter indicates if the transmitter referred virtual noise is active on the line in the upstream direction. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.46 | ColumnzxAnXdsl2LnStatusActElPolicy | read-only | current | The actual UPBO kl0 policy. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.47 | ColumnzxAnXdsl2LnStatusElectLenDs | read-only | current | (UPBOKLE) This parameter contains the estimated electrical length of downstream expressed in dB at 1 MHz, kl0. This is the final electrical length that would h… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.48 | ColumnzxAnXdsl2LnStatusElectLenUs | read-only | current | (UPBOKLE) This parameter contains the estimated electrical length of upstream expressed in dB at 1 MHz, kl0. This is the final electrical length that would hav… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.49 | ColumnzxAnXdsl2LnStatusActKl0 | read-only | current | The actual kl0 used by the line. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.50 | ColumnzxAnXdsl2LnStatusTssiDs | read-only | current | The transmit spectrum shaping (TSSi) breakpoints of downstream expressed as the set of breakpoints exchanged during G.994.1. Each breakpoint is a pair of value… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.51 | ColumnzxAnXdsl2LnStatusTssiUs | read-only | current | The transmit spectrum shaping (TSSi) breakpoints of upstream expressed as the set of breakpoints exchanged during G.994.1. Each breakpoint is a pair of values … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.52 | ColumnzxAnXdsl2LnStatusMrefPsdDs | read-only | current | The MEDLEY Reference PSD status parameters on downstreasm direction expressed as the set of breakpoints exchanged at initialization. The OCTET STRING contains … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.53 | ColumnzxAnXdsl2LnStatusMrefPsdUs | read-only | current | The MEDLEY Reference PSD status parameters on upstreasm direction expressed as the set of breakpoints exchanged at initialization. The OCTET STRING contains up… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.54 | ColumnzxAnXdsl2LnStatusTrellisDs | read-only | current | This parameter reports whether trellis coding is in use in the downstream direction. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.55 | ColumnzxAnXdsl2LnStatusTrellisUs | read-only | current | This parameter reports whether trellis coding is in use in the upstream direction. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.56 | ColumnzxAnXdsl2LnStatusActualCe | read-only | current | (ACTUALCE) This parameter reports the cyclic extension used on the line. It is coded as an unsigned integer from 2 to 16 in units of N/32 samples, where 2N is … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.57 | ColumnzxAnXdsl2LnStatusClassMask | read-only | current | (CLASSMASK). In order to reduce the number of configuration possibilities, the limit Power Spectral Density masks (see LIMITMASK) are grouped in PSD mask class… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.58 | ColumnzxAnXdsl2LnStatusOperState | read-only | current | The operational status of the line. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.59 | ColumnzxAnXdsl2LnStatusActDataPathType | read-only | current | Actual data path type of this line. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.60 | ColumnzxAnXdsl2LnStatusDataPathType | read-write | current | Data path type of this line. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.61 | ColumnzxAnXdsl2LnStatusBitswapDs | read-write | current | Enabled or disabled the Bitswap of downstream. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.62 | ColumnzxAnXdsl2LnStatusBitswapUs | read-write | current | Enabled or disabled the Bitswap of upstream. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.63 | ColumnzxAnXdsl2LnStatusHighRateLimit | read-write | current | Enabled or disabled the high rate limitation. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.64 | ColumnzxAnXdsl2LnExtConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Line Dpbo Profile Table, (zxAnXdsl2LnExtConfPrfTable), which applies for this line. This object MUST b… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.65 | ColumnzxAnXdsl2LnStatusPrevAttainRateDs | read-only | current | Last Maximum Attainable Data Rate Downstream. The maximum downstream net data rate attainable by the xTU-C transmitter and the xTU-R receiver last time, coded … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.66 | ColumnzxAnXdsl2LnStatusPrevAttainRateUs | read-only | current | Last Maximum Attainable Data Rate Upstream. The maximum upstream net data rate attainable by the xTU-R transmitter and the xTU-C receiver last time, coded in k… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.67 | ColumnzxAnXdsl2LnCmndPMReset | read-write | current | Reset the performance monitoring results of single line. currentPerf(0) - reset the current performance monitoring results. it will affect only current real-ti… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.80 | ColumnzxAnXdsl2LnCustomizedCapability | read-write | current | The specific functions reserved by ZTE. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.81 | ColumnzxAnXdsl2LnInpEtrDs | read-only | current | The expected throughput (ETR). |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.82 | ColumnzxAnXdsl2LnInpEtrUs | read-only | current | The expected throughput (ETR). |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.83 | ColumnzxAnXdsl2LnInpEftrDs | read-only | current | The error-free throughput (EFTR is defined as the average bit-rate at the alpha1/beta1 reference point, of bits originating from DTU's which have been detected… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.84 | ColumnzxAnXdsl2LnInpEftrUs | read-only | current | The error-free throughput (EFTR is defined as the average bit-rate at the alpha1/beta1 reference point, of bits originating from DTU's which have been detected… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.85 | ColumnzxAnXdsl2LnInpMinEftrDs | read-only | deprecated | The minimum error-free throughput (EFTR_min is defined as the minimum of the EFTR observed since the last reading of the EFTR_min. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.86 | ColumnzxAnXdsl2LnInpMinEftrUs | read-only | deprecated | The minimum error-free throughput (EFTR_min is defined as the minimum of the EFTR observed since the last reading of the EFTR_min. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.87 | ColumnzxAnXdsl2LnInpActDelayDs | read-only | current | If retransmission is used in a given transmit direction, this Object is defined as the actual value of the time-independent component of the delay between the … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.88 | ColumnzxAnXdsl2LnInpActDelayUs | read-only | current | If retransmission is used in a given transmit direction, this Object is defined as the actual value of the time-independent component of the delay between the … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.89 | ColumnzxAnXdsl2LnFextCancellationDs | read-write | current | Enable/disable downstream FEXT cancellation. This configuration parameter shall be defined for each line in a group of vectored lines. It enables or disables F… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.90 | ColumnzxAnXdsl2LnFextCancellationUs | read-write | current | Enable/disable upstream FEXT cancellation. This configuration parameter shall be defined for each line in a group of vectored lines. It enables or disables FEX… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.91 | ColumnzxAnXdsl2LnSosConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Line SOS Profile Table, (zxAnXdsl2SosConfPrfTable), which applies for this line. This object MUST be m… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.92 | ColumnzxAnXdsl2LnStatusLnAttenDs | read-only | current | Downstream line Attenuation. When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C an… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.93 | ColumnzxAnXdsl2LnStatusLnAttenUs | read-only | current | Upstream line Attenuation. When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.94 | ColumnzxAnXdsl2LnStatusSigAttenDs | read-only | current | Downstream signal Attenuation. When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.95 | ColumnzxAnXdsl2LnStatusSigAttenUs | read-only | current | Upstream signal Attenuation. When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C an… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.96 | ColumnzxAnXdsl2LnStatusSnrMarginDs | read-only | current | SNR Margin is the maximum increase in dB of the noise power received at the XTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstr… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.97 | ColumnzxAnXdsl2LnStatusSnrMarginUs | read-only | current | SNR Margin is the maximum increase in dB of the noise power received at the XTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstr… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.98 | ColumnzxAnXdsl2LnInmConfPrf | read-write | current | The value of this object identifies the row in the xDSL2 Line INM Profile Table, (zxAnXdsl2InmConfPrfTable), which applies for this line. This object MUST be m… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.99 | ColumnzxAnXdsl2LnLofStatsDs | read-only | current | Downstream count of times that there was LOF. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.100 | ColumnzxAnXdsl2LnLofStatsUs | read-only | current | Upstream count of times that there was LOF. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.101 | ColumnzxAnXdsl2LnLolStatsDs | read-only | current | Downstream count of times that there was LOL. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.102 | ColumnzxAnXdsl2LnLolStatsUs | read-only | current | Upstream count of times that there was LOF. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.103 | ColumnzxAnXdsl2LnLprStatsDs | read-only | current | Downstream count of times that there was LPR. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.104 | ColumnzxAnXdsl2LnLprStatsUs | read-only | current | Upstream count of times that there was LPR. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.105 | ColumnzxAnXdsl2LnActInpShineDs | read-only | current | The test parameter INP_act_SHINE is defined as the actual INP against SHINE of the latency path with retransmission under following specific conditions: Assumi… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.106 | ColumnzxAnXdsl2LnActInpShineUs | read-only | current | The test parameter INP_act_SHINE is defined as the actual INP against SHINE of the latency path with retransmission under following specific conditions: Assumi… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.107 | ColumnzxAnXdsl2LnActInpReinDs | read-only | current | The test parameter INP_act_REIN is defined as the minimum of 1) the actual INP against REIN of the latency path with retransmission under the following specifi… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.108 | ColumnzxAnXdsl2LnActInpReinUs | read-only | current | The test parameter INP_act_REIN is defined as the minimum of 1) the actual INP against REIN of the latency path with retransmission under the following specifi… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.109 | ColumnzxAnXdsl2LnStatusActRaModeDs | read-only | current | This parameter indicates the actual active RA-MODE in the downstream direction. If ACT-RA-MODEds equals 1, the link is operating in RA-MODE 1 (MANUAL). If ACT-… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.110 | ColumnzxAnXdsl2LnStatusActRaModeUs | read-only | current | This parameter indicates the actual active RA-MODE in the upstream direction. If ACT-RA-MODEus equals 1, the link is operating in RA-MODE 1 (MANUAL). If ACT-RA… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.111 | ColumnzxAnXdsl2LnStatusRtxUsedDs | read-only | current | This parameter specifies whether ITU-T G.998.4 retransmission is used (i.e., active in showtime) in a given transmit direction. The parameter in downstream is … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.10.1.112 | ColumnzxAnXdsl2LnStatusRtxUsedUs | read-only | current | This parameter specifies whether ITU-T G.998.4 retransmission is used (i.e., active in showtime) in a given transmit direction. The parameter in downstream is … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.11 | TablezxAnXdsl2LnBandTable | not-accessible | current | The table zxAnXdsl2LnBandTable contains the, per-band line status parameters of the VDSL2/ADSL/ADSL2 or ADSL2+ line. The indexes of this table consist of an in… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.11.1 | RowzxAnXdsl2LnBandEntry | not-accessible | current | The table zxAnXdsl2LnBandTable contains the, per-band line status parameters of the VDSL2/ADSL/ADSL2 or ADSL2+ line. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.11.1.1 | ColumnzxAnXdsl2LineBandStatusPrevSnrMargin | read-only | current | The Last SNR Margin. SNR Margin is the maximum increase in dB of the noise power received at the XTU (xTU-R for a band in the downstream direction and xTU-C fo… |
| 1.3.6.1.4.1.3902.1015.1001.1.3 | NodezxAnXdsl2LineProfile | |||
| 1.3.6.1.4.1.3902.1015.1001.1.3.10 | TablezxAnXdsl2DsDataRateConfPrfTable | not-accessible | current | The DsDataRate Profile contains the downstream parameters related to the service offer of all bearers. Entries in this table MUST be maintained in a persistent… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.10.1 | RowzxAnXdsl2DsDataRateConfPrfEntry | not-accessible | current | The table zxAnXdsl2DsDataRateConfPrfTable contains VDSL2/ADSL/ ADSL2 and ADSL2+ basic configuration profile. A default profile with an index of 'VDEFVAL' will … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.10.1.1 | ColumnzxAnXdsl2DsDataRateConfPrfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.10.1.2 | ColumnzxAnXdsl2ChConfChannRaRatioDs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Downstream. The ratio re… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.10.1.3 | ColumnzxAnXdsl2ChConfMinDataRateDs | read-create | current | Minimum Data Rate on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.10.1.4 | ColumnzxAnXdsl2ChConfMaxDataRateDs | read-create | current | Maximum Data Rate on Downstream direction. The maximum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.10.1.5 | ColumnzxAnXdsl2ChConfMinResRateDs | read-create | current | Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if t… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.10.1.6 | ColumnzxAnXdsl2ChConfMinRateLowPwrDs | read-create | current | Minimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s., during the low power state (L1… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.10.1.7 | ColumnzxAnXdsl2ChConfMaxBerDs | read-create | current | Maximum Bit Error Ratio on Downstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.10.1.8 | ColumnzxAnXdsl2ChConfDsDataRateDs | read-create | current | Data Rate Threshold Downshift for downstream direction. A 'Down-shift rate change' event is triggered when the actual downstream data rate is below the data ra… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.10.1.9 | ColumnzxAnXdsl2ChConfUsDataRateDs | read-create | current | Data Rate Threshold Up shift for downstream direction. An 'Up-shift rate change' event is triggered when the actual downstream data rate exceeds, by more than … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.10.1.10 | ColumnzxAnXdsl2ChConfMinSosBitRateDs | read-create | current | This parameter specifies the minimum net data rate required for a valid SOS request in the downstream direction. The value shall be coded as an unsigned intege… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.10.1.80 | ColumnzxAnXdsl2DsDataRatePrfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.11 | TablezxAnXdsl2UsDataRateConfPrfTable | not-accessible | current | The UsDataRate Profile contains the upstream parameters related to the service offer of all bearers. Entries in this table MUST be maintained in a persistent m… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.11.1 | RowzxAnXdsl2UsDataRateConfPrfEntry | not-accessible | current | The table zxAnXdsl2UsDataRateConfPrfTable contains VDSL2/ADSL/ ADSL2 and ADSL2+ basic configuration profile. A default profile with an index of 'VDEFVAL' will … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.11.1.1 | ColumnzxAnXdsl2UsDataRateConfPrfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.11.1.2 | ColumnzxAnXdsl2ChConfChannRaRatioUs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Upstream. The ratio refe… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.11.1.3 | ColumnzxAnXdsl2ChConfMinDataRateUs | read-create | current | Minimum Data Rate on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.11.1.4 | ColumnzxAnXdsl2ChConfMaxDataRateUs | read-create | current | Maximum Data Rate on Upstream direction. The maximum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.11.1.5 | ColumnzxAnXdsl2ChConfMinResRateUs | read-create | current | Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.11.1.6 | ColumnzxAnXdsl2ChConfMinRateLowPwrUs | read-create | current | Minimum Data Rate in Low Power state on upstream direction. The minimum net data rate for the bearer channel, coded in bit/s., during the low power state (L1 i… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.11.1.7 | ColumnzxAnXdsl2ChConfMaxBerUs | read-create | current | Maximum Bit Error Ratio on Upstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-5 … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.11.1.8 | ColumnzxAnXdsl2ChConfDsDataRateUs | read-create | current | Data Rate Threshold Downshift for upstream direction. A 'Down-shift rate change' event is triggered when the actual upstream data rate is below the data rate a… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.11.1.9 | ColumnzxAnXdsl2ChConfUsDataRateUs | read-create | current | Data Rate Threshold Up shift for upstream direction. An 'Up-shift rate change' event is triggered when the actual upstream data rate exceeds, by more than the … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.11.1.10 | ColumnzxAnXdsl2ChConfMinSosBitRateUs | read-create | current | This parameter specifies the minimum net data rate required for a valid SOS request in the upstream direction. The value shall be coded as an unsigned integer … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.11.1.80 | ColumnzxAnXdsl2UsDataRatePrfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12 | TablezxAnXdsl2SpectrumConfPrfTable | not-accessible | current | The Line Spectrum Profile contains the parameters that identify the basic characteristics of the spectrum used on the line (xDSL mode, PSD, aggregate power). E… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1 | RowzxAnXdsl2SpectrumConfPrfEntry | not-accessible | current | A default profile with an index of 'VDEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this doc… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.1 | ColumnzxAnXdsl2SpectrumConfPrfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.2 | ColumnzxAnXdsl2LConfXtuTransSysEna | read-create | current | xTU Transmission System Enabling (xTSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more b… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.3 | ColumnzxAnXdsl2LConfScMaskDs | read-create | current | Sub-carriers mask. A bitmap of 4096 bits that allows masking up to 4096 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCds) is set to '1', t… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.4 | ColumnzxAnXdsl2LConfScMaskUs | read-create | current | Sub-carriers mask. A bitmap of 4096 bits that allows masking up to 4096 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCus) is set to '1', t… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.5 | ColumnzxAnXdsl2LConfVdsl2CarMask | read-create | current | (VDSL2-CARMASK). VDSL2 specific Sub-carriers mask. This configuration parameter defines the restrictions, additional to the band plan, to determine the set of … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.6 | ColumnzxAnXdsl2LConfMsgMinDs | read-create | current | Minimum Overhead Rate Downstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in downstream direction. Expressed… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.7 | ColumnzxAnXdsl2LConfMsgMinUs | read-create | current | Minimum Overhead Rate Upstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in upstream direction. Expressed in … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.8 | ColumnzxAnXdsl2LConfCeFlag | read-create | current | (CEFLAG). This parameter is a bit that enables the use of the optional cyclic extension values. If the bit is set to 1, the optional cyclic extension values ma… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.9 | ColumnzxAnXdsl2LConfPmMode | read-create | current | Power management state Enabling (PMMode). Defines the power states the xTU-C or xTU-R may autonomously transition to on this line. The various bit positions ar… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.10 | ColumnzxAnXdsl2LConfL0Time | read-create | current | The minimum time (in seconds) between an Exit from the L2 state and the next Entry into the L2 state (L0-TIME). It ranges from 0 to 255 seconds. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.11 | ColumnzxAnXdsl2LConfL2Time | read-create | current | The minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 Sta… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.12 | ColumnzxAnXdsl2LConfL2Atpr | read-create | current | The maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single Power Trim in the L2 state (L2… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.13 | ColumnzxAnXdsl2LConfL2Atprt | read-create | current | The total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at tr… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.14 | ColumnzxAnXdsl2LConfProfiles | read-create | current | The configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line (PROFILES). It is coded in a bitmap representation (0 … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.15 | ColumnzxAnXdsl2LConfUs0Mask | read-create | current | The set of profiles which allows the transceivers to support a subset of allowed settings, as defined in G.993.2 Recommendation. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.12.1.30 | ColumnzxAnXdsl2SpectrumPrfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.13 | TablezxAnXdsl2DpboConfPrfTable | not-accessible | current | The DPBO Profile contains all the parameters related to the ownstream PBO shaping. Entries in this table MUST be maintained in a persistent manner. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.13.1 | RowzxAnXdsl2DpboConfPrfEntry | not-accessible | current | A default profile with an index of 'VDEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this doc… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.13.1.1 | ColumnzxAnXdsl2DpboConfPrfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.13.1.2 | ColumnzxAnXdsl2LConfDpboEPsd | read-create | current | (DPBOEPSD). This configuration parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as zxAn… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.13.1.3 | ColumnzxAnXdsl2LConfDpboEsEL | read-create | current | (DPBOESEL). This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote fle… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.13.1.4 | ColumnzxAnXdsl2LConfDpboEscmA | read-create | current | (DPBOESCMA). The E-side Cable Model parameter A (DPBOESCMA) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibi… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.13.1.5 | ColumnzxAnXdsl2LConfDpboEscmB | read-create | current | (DPBOESCMB). The E-side Cable Model parameter B (DPBOESCMB) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibi… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.13.1.6 | ColumnzxAnXdsl2LConfDpboEscmC | read-create | current | (DPBOESCMC). The E-side Cable Model parameter C (DPBOESCMC) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibi… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.13.1.7 | ColumnzxAnXdsl2LConfDpboMus | read-create | current | (DPBOMUS). This configuration parameter defines the assumed Minimum Usable receive PSD mask (in dBm/Hz) for exchange based services, used to modify parameter z… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.13.1.8 | ColumnzxAnXdsl2LConfDpboFMin | read-create | current | (DPBOFMIN). This configuration parameter defines the minimum frequency from which the DPBO shall be applied. It ranges from 0 kHz (coded as 0) to 8832 kHz (cod… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.13.1.9 | ColumnzxAnXdsl2LConfDpboFMax | read-create | current | (DPBOFMAX). This configuration parameter defines the maximum frequency at which DPBO may be applied. It ranges from 138 kHz (coded as 32) to 29997.75 kHz (code… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.13.1.30 | ColumnzxAnXdsl2DpboConfPrfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14 | TablezxAnXdsl2UpboConfPrfTable | not-accessible | current | The UPBO Profile contains all the parameters related to the Upstream PBO shaping. Entries in this table MUST be maintained in a persistent manner. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1 | RowzxAnXdsl2UpboConfPrfEntry | not-accessible | current | A default profile with an index of 'VDEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this doc… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.1 | ColumnzxAnXdsl2LUpboConfPrfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.2 | ColumnzxAnXdsl2LConfUpboKL | read-create | current | (UPBOKL). This configuration parameter defines the electrical length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value ranges from 0 (coded as … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.3 | ColumnzxAnXdsl2LConfUpboKLF | read-create | current | Defines the upstream power backoff force mode (UPBOKLF). |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.4 | ColumnzxAnXdsl2LConfUpboU1bandPsdA | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.5 | ColumnzxAnXdsl2LConfUpboU1bandPsdB | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.6 | ColumnzxAnXdsl2LConfUpboU2bandPsdA | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.7 | ColumnzxAnXdsl2LConfUpboU2bandPsdB | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.8 | ColumnzxAnXdsl2LConfUpboU3bandPsdA | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.9 | ColumnzxAnXdsl2LConfUpboU3bandPsdB | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.10 | ColumnzxAnXdsl2LConfUpboU4bandPsdA | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.11 | ColumnzxAnXdsl2LConfUpboU4bandPsdB | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.12 | ColumnzxAnXdsl2LConfUpboU1bandKLRef | read-create | current | This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for each upstream band except US0, for the optional Equ… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.13 | ColumnzxAnXdsl2LConfUpboU2bandKLRef | read-create | current | This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for each upstream band except US0, for the optional Equ… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.14 | ColumnzxAnXdsl2LConfUpboU3bandKLRef | read-create | current | This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for each upstream band except US0, for the optional Equ… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.15 | ColumnzxAnXdsl2LConfUpboU4bandKLRef | read-create | current | This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for each upstream band except US0, for the optional Equ… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.14.1.30 | ColumnzxAnXdsl2LUpboConfPrfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15 | TablezxAnXdsl2SnrMarginConfPrfTable | not-accessible | current | The Noise Margin Profile contains all the noise margin parameters to be defined for the line. Entries in this table MUST be maintained in a persistent manner. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1 | RowzxAnXdsl2SnrMarginConfPrfEntry | not-accessible | current | A default profile with an index of 'VDEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this doc… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.1 | ColumnzxAnXdsl2SnrMarginConfPrfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.2 | ColumnzxAnXdsl2LConfTargetSnrmDs | read-create | current | The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.3 | ColumnzxAnXdsl2LConfTargetSnrmUs | read-create | current | The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the upstream bearer channels, to successfully complete i… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.4 | ColumnzxAnXdsl2LConfMaxSnrmDs | read-create | current | The maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce the xT… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.5 | ColumnzxAnXdsl2LConfMaxSnrmUs | read-create | current | The maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce the xT… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.6 | ColumnzxAnXdsl2LConfMinSnrmDs | read-create | current | The minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase the xTU… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.7 | ColumnzxAnXdsl2LConfMinSnrmUs | read-create | current | The minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase the xTU… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.8 | ColumnzxAnXdsl2LConfRaUsNrmDs | read-create | current | The Downstream Up-Shift Noise Margin value, to be used when zxAnXdsl2LConfRaModeDs is set to dynamicRa. If the downstream noise margin is above this value and … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.9 | ColumnzxAnXdsl2LConfRaUsNrmUs | read-create | current | The Upstream Up-Shift Noise Margin value, to be used when zxAnXdsl2LConfRaModeUs is set to dynamicRa. If the upstream noise margin is above this value and stay… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.10 | ColumnzxAnXdsl2LConfRaUsTimeDs | read-create | current | The Downstream Up-Shift Time Interval, to be used when zxAnXdsl2LConfRaModeDs is set to dynamicRa. The interval of time that the downstream noise margin should… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.11 | ColumnzxAnXdsl2LConfRaUsTimeUs | read-create | current | The Upstream Up-Shift Time Interval, to be used when zxAnXdsl2LConfRaModeUs is set to dynamicRa. The interval of time the upstream noise margin should stay abo… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.12 | ColumnzxAnXdsl2LConfRaDsNrmDs | read-create | current | The Downstream Down-Shift Noise Margin value, to be used when zxAnXdsl2LConfRaModeDs is set to dynamicRa. If the downstream noise margin is below this value an… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.13 | ColumnzxAnXdsl2LConfRaDsNrmUs | read-create | current | The Upstream Downshift Noise Margin value, to be used when zxAnXdsl2LConfRaModeUs is set to dynamicRa. If the upstream noise margin is below this value and sta… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.14 | ColumnzxAnXdsl2LConfRaDsTimeDs | read-create | current | The Downstream Downshift Time Interval, to be used when zxAnXdsl2LConfRaModeDs is set to dynamicRa. The interval of time the downstream noise margin should sta… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.15 | ColumnzxAnXdsl2LConfRaDsTimeUs | read-create | current | The Upstream Down-Shift Time Interval, to be used when zxAnXdsl2LConfRaModeUs is set to dynamicRa. The interval of time the upstream noise margin should stay b… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.16 | ColumnzxAnXdsl2LConfSnrModeDs | read-create | current | This parameter enables/disables the transmitter referred virtual noise in the downstream direction. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.17 | ColumnzxAnXdsl2LConfSnrModeUs | read-create | current | This parameter enables/disables the transmitter referred virtual noise in the upstream direction. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.18 | ColumnzxAnXdsl2LConfRaModeDs | read-create | current | The mode of operation of a rate-adaptive xTU-C in the transmit direction. The parameter can take three values: fixed (1), raInit (2), dynamicRa (3). |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.19 | ColumnzxAnXdsl2LConfRaModeUs | read-create | current | The mode of operation of a rate-adaptive xTU-R in the transmit direction. The parameter can take three values: fixed (1), raInit (2), dynamicRa (3). |
| 1.3.6.1.4.1.3902.1015.1001.1.3.15.1.30 | ColumnzxAnXdsl2SnrMarginConfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.16 | TablezxAnXdsl2DelayInpConfPrfTable | not-accessible | current | The Delay-Inp Profile contains the INP and Delay values to be defined for the enabled bearer. Entries in this table MUST be maintained in a persistent manner. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.16.1 | RowzxAnXdsl2DelayInpConfPrfEntry | not-accessible | current | A default profile with an index of 'VDEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this doc… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.16.1.1 | ColumnzxAnXdsl2DelayInpConfPrfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.16.1.2 | ColumnzxAnXdsl2ChConfMaxDelayDs | read-create | current | Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The xTUs shall choos… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.16.1.3 | ColumnzxAnXdsl2ChConfMaxDelayUs | read-create | current | Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The xTUs shall choose th… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.16.1.4 | ColumnzxAnXdsl2ChConfMinProtectDs | read-create | current | Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.16.1.5 | ColumnzxAnXdsl2ChConfMinProtectUs | read-create | current | Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.16.1.6 | ColumnzxAnXdsl2ChConfMinProtect8Ds | read-create | current | (INPMIN8ds). This parameter specifies the minimum impulse noise protection for the bearer channel if it is transported over DMT symbols with a subcarrier spaci… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.16.1.7 | ColumnzxAnXdsl2ChConfMinProtect8Us | read-create | current | (INPMIN8us). This parameter specifies the minimum impulse noise protection for the bearer channel if it is transported over DMT symbols with a subcarrier spaci… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.16.1.8 | ColumnzxAnXdsl2ChConfForceInpDs | read-create | current | Enable /disable force to use INP. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.16.1.9 | ColumnzxAnXdsl2ChConfForceInpUs | read-create | current | Enable /disable force to use INP. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.16.1.10 | ColumnzxAnXdsl2ChConfMaxDelayVar | read-create | current | Maximum delay variation (DVMAX). This optional VDSL2 specific parameter specifies the maximum value for the delay variation allowed in an OLR procedure. It is … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.16.1.11 | ColumnzxAnXdsl2ChConfInitPolicy | read-create | current | Channel Initialization Policy Selection (CIPOLICY). This optional parameter indicates which policy shall be applied to determine the transceiver configuration … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.16.1.80 | ColumnzxAnXdsl2DIConfPrfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.17 | TablezxAnXdsl2VirtualNoiseConfPrfTable | not-accessible | current | The Line Virtual Noise Profile Table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.17.1 | RowzxAnXdsl2VirtualNoiseConfPrfEntry | not-accessible | current | A default profile with an index of 'VDEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this doc… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.17.1.1 | ColumnzxAnXdsl2VirtualNoiseConfPrfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.17.1.2 | ColumnzxAnXdsl2LConfTxRefVnDs | read-create | current | This configuration parameter defines the downstream transmitter referred virtual noise (TXREFVNds). The TXREFVNds shall be specified through a set of breakpoin… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.17.1.3 | ColumnzxAnXdsl2LConfTxRefVnUs | read-create | current | This configuration parameter defines the upstream transmitter referred virtual noise (TXREFVNus). The TXREFVNus shall be specified through a set of breakpoints… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.17.1.30 | ColumnzxAnXdsl2VNConfPrfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.18 | TablezxAnXdsl2RfiConfPrfTable | not-accessible | current | The Line RFI Profile Table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.18.1 | RowzxAnXdsl2RfiConfPrfEntry | not-accessible | current | A default profile with an index of 'VDEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this doc… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.18.1.1 | ColumnzxAnXdsl2LConfRfiPrfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.18.1.2 | ColumnzxAnXdsl2LConfRfiBandsDs | read-create | current | RfiBands configured in the downstream. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.18.1.30 | ColumnzxAnXdsl2RfiConfPrfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.19 | TablezxAnXdsl2ProfModeSpecTable | not-accessible | current | The table zxAnXdsl2ProfModeSpecTable extends the DSL line configuration profile by xDSL Mode Specific parameters. A row in this table that has an index of zxAn… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.19.1 | RowzxAnXdsl2ProfModeSpecEntry | not-accessible | current | The table zxAnXdsl2ProfModeSpecTable extends the DSL line configuration profile by DSL Mode Specific parameters. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.19.1.1 | ColumnzxAnXdsl2LConfXdslMode | not-accessible | current | The DSL Mode is a way of categorizing the various xDSL transmission modes into groups, each group (xDSL Mode) shares the same PSD configuration. There should b… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.19.1.2 | ColumnzxAnXdsl2LConfMaxNomPsdDs | read-create | current | (MAXNOMPSDds). The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.19.1.3 | ColumnzxAnXdsl2LConfMaxNomPsdUs | read-create | current | (MAXNOMPSDus). The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.19.1.4 | ColumnzxAnXdsl2LConfMaxNomAtpDs | read-create | current | (MAXNOMATPds). The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.19.1.5 | ColumnzxAnXdsl2LConfMaxNomAtpUs | read-create | current | (MAXNOMATPus). The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.19.1.6 | ColumnzxAnXdsl2LConfMaxAggRxPwrUs | read-create | current | (MAXRXPWRus). The maximum upstream aggregate receive power over the relevant set of sub-carriers. The xTU-C should verify that the upstream power cutback is su… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.19.1.7 | ColumnzxAnXdsl2LConfPsdMaskDs | read-create | current | (PSDMASKds). The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G.992.5 and it may impose PSD restrictions (breakp… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.19.1.8 | ColumnzxAnXdsl2LConfPsdMaskUs | read-create | current | (PSDMASKus). The upstream PSD mask applicable at the U-R2 reference point. This parameter is used only for G.992.5 and it may impose PSD restrictions (breakpoi… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.19.1.9 | ColumnzxAnXdsl2LConfPsdMaskSelectUs | read-create | current | The selected upstream PSD mask. This parameter is used only for annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.19.1.10 | ColumnzxAnXdsl2LConfClassMask | read-create | current | (CLASSMASK). In order to reduce the number of configuration possibilities, the limit Power Spectral Density masks (see LIMITMASK) are grouped in PSD mask class… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.19.1.11 | ColumnzxAnXdsl2LConfLimitMask | read-create | current | (LIMITMASK). This configuration parameter contains the G.993.2 limit PSD masks of the selected PSD mask class, enabled by the near-end xTU on this line for eac… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.19.1.12 | ColumnzxAnXdsl2LConfUs0Disable | read-create | current | Enable or disable the use of US0. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.19.1.30 | ColumnzxAnXdsl2ProfModeSpecRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20 | TablezxAnXdsl2ExtConfPrfTable | not-accessible | current | The Line Ext Profile Table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1 | RowzxAnXdsl2ExtConfPrfEntry | not-accessible | current | The extend profile, a default profile with an index of 'VDEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise s… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.1 | ColumnzxAnXdsl2LConfExtPrfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.10 | ColumnzxAnXdsl2LConfInpMinEtrUs | read-create | current | GINP configuration parameters of upstream. Minimum allowed value for Expected throughput(ETR). to VDSL:range is 0-200000. to ADSL:range is 0-10240. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.11 | ColumnzxAnXdsl2LConfInpMinEtrDs | read-create | current | GINP configuration parameters of downstream. Minimum allowed value for Expected throughput(ETR). to VDSL:range is 0-200000. to ADSL:range is 0-131040. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.12 | ColumnzxAnXdsl2LConfInpMaxEtrUs | read-create | current | GINP configuration parameters of upstream. Maximum allowed value for Expected throughput(ETR). to VDSL:range is 0-200000. to ADSL:range is 0-10240. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.13 | ColumnzxAnXdsl2LConfInpMaxEtrDs | read-create | current | GINP configuration parameters of downstream. Maximum allowed value for Expected throughput(ETR). to VDSL:range is 0-200000. to ADSL:range is 0-131040. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.14 | ColumnzxAnXdsl2LConfInpMaxNetUs | read-create | current | GINP configuration parameters of upstream. Maximum net data rate over alpha1/beta1 interface . to VDSL:range is 0-200000. to ADSL:range is 0-10240. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.15 | ColumnzxAnXdsl2LConfInpMaxNetDs | read-create | current | GINP configuration parameters of downstream. Maximum net data rate over alpha1/beta1 interface. to VDSL:range is 0-200000. to ADSL:range is 0-131040. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.16 | ColumnzxAnXdsl2LConfInpShineRatioUs | read-create | current | GINP configuration parameters of upstream. The loss of rate in a 1 second interval expressed as a fraction of NDR(Net data rate) due to a SHINE impulse noise e… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.17 | ColumnzxAnXdsl2LConfInpShineRatioDs | read-create | current | GINP configuration parameters of downstream. The loss of rate in a 1 second interval expressed as a fraction of NDR(Net data rate) due to a SHINE impulse noise… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.18 | ColumnzxAnXdsl2LConfInpMinReinUs | read-create | current | GINP configuration parameters of upstream. Minimum impulse protection against electrical repetitive impulse noise in DMT symbols. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.19 | ColumnzxAnXdsl2LConfInpMinReinDs | read-create | current | GINP configuration parameters of downstream. Minimum impulse protection against electrical repetitive impulse noise in DMT symbols. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.20 | ColumnzxAnXdsl2LConfInpIaReinFlagUs | read-create | current | GINP configuration parameters of upstream. Configuration flag indicating the inter-arrival of REIN. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.21 | ColumnzxAnXdsl2LConfInpIaReinFlagDs | read-create | current | GINP configuration parameters of downstream. Configuration flag indicating the inter-arrival of REIN. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.22 | ColumnzxAnXdsl2LConfInpMinDelayUs | read-create | current | GINP configuration parameters of upstream. Minimum delay in ms. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.23 | ColumnzxAnXdsl2LConfInpMinDelayDs | read-create | current | GINP configuration parameters of downstream. Minimum delay in ms. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.24 | ColumnzxAnXdsl2LConfInpRetxModeUs | read-create | current | GINP configuration parameters of upstream used to control activation of retransmission during initialization. forbidden(1) - G.998.4 retransmission not allowed… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.25 | ColumnzxAnXdsl2LConfInpRetxModeDs | read-create | current | GINP configuration parameters of upstream used to control activation of retransmission during initialization. forbidden(1) - G.998.4 retransmission not allowed… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.26 | ColumnzxAnXdsl2LConfInpMaxDelayUs | read-create | current | GINP configuration parameters of upstream. Maximum delay in milliseconds. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.27 | ColumnzxAnXdsl2LConfInpMaxDelayDs | read-create | current | GINP configuration parameters of downstream. Maximum delay in milliseconds. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.28 | ColumnzxAnXdsl2LConfChanInitPolicyUs | read-create | current | The channel initialisation policy of upstream used by the receiver to select the values of transceiver parameters. Support of Channel Initialization Policy 0 i… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.29 | ColumnzxAnXdsl2LConfChanInitPolicyDs | read-create | current | The channel initialisation policy of downstream used by the receiver to select the values of transceiver parameters. Support of Channel Initialization Policy 0… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.30 | ColumnzxAnXdsl2LFextCancelNotReqBandDs | read-create | current | This configuration parameter shall be an array of pairs of downstream sub-carrier indices. Each pair represents the start and stop sub-carrier index of a frequ… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.31 | ColumnzxAnXdsl2LFextCancelNotReqBandUs | read-create | current | This configuration parameter shall be an array of pairs of upstream sub-carrier indices. Each pair represents the start and stop sub-carrier index of a frequen… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.32 | ColumnzxAnXdsl2LConfInpMinShineUs | read-create | current | GINP configuration parameters of upstream. The INPMIN_SHINE_RTX is a configuration parameter that, for the case of subcarrier spacing of 4.3125kHz, is used to … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.33 | ColumnzxAnXdsl2LConfInpMinShineDs | read-create | current | GINP configuration parameters of upstream. The INPMIN_SHINE_RTX is a configuration parameter that, for the case of subcarrier spacing of 4.3125kHz, is used to … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.34 | ColumnzxAnXdsl2LConfInpMin8ShineUs | read-create | current | GINP configuration parameters of upstream. The INPMIN8_SHINE_RTX is a configuration parameter that, for the case of subcarrier spacing of 8.625kHz, is used to … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.35 | ColumnzxAnXdsl2LConfInpMin8ShineDs | read-create | current | GINP configuration parameters of upstream. The INPMIN8_SHINE_RTX is a configuration parameter that, for the case of subcarrier spacing of 8.625kHz, is used to … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.36 | ColumnzxAnXdsl2LConfInpMin8ReinUs | read-create | current | GINP configuration parameters of upstream. The INPMIN8_REIN_RTX is a configuration parameter that, for the case of subcarrier spacing of 8.625kHz, is used to d… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.37 | ColumnzxAnXdsl2LConfInpMin8ReinDs | read-create | current | GINP configuration parameters of upstream. The INPMIN8_REIN_RTX is a configuration parameter that, for the case of subcarrier spacing of 8.625kHz, is used to d… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.20.1.50 | ColumnzxAnXdsl2ExtConfPrfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21 | TablezxAnXdsl2SosConfPrfTable | not-accessible | current | The Line SOS Profile Table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21.1 | RowzxAnXdsl2SosConfPrfEntry | not-accessible | current | Line SOS profile entry. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21.1.1 | ColumnzxAnXdsl2LConfSosPrfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21.1.2 | ColumnzxAnXdsl2LConfSosTimeWindowDs | read-create | current | The parameter SOS-TIME-ds is used in the specification of the receiver initiated SOS(see 13.4.3/G.993.2). If the value of this parameter is not zero, the stand… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21.1.3 | ColumnzxAnXdsl2LConfSosTimeWindowUs | read-create | current | The parameter SOS-TIME-us is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2). If the value of this parameter is not zero, the stan… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21.1.4 | ColumnzxAnXdsl2LConfSosNTonesDs | read-create | current | This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21.1.5 | ColumnzxAnXdsl2LConfSosNTonesUs | read-create | current | The minimum percentage of tones in the upstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the standard SOS triggering criteri… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21.1.6 | ColumnzxAnXdsl2LConfSosCrcDs | read-create | current | This parameter is defined as the minimum number of normalized CRC anomalies received in SOSTIME-ds seconds in order to arm the second sub-condition of the stan… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21.1.7 | ColumnzxAnXdsl2LConfSosCrcUs | read-create | current | This parameter is defined as the minimum number of normalized CRC anomalies received in SOSTIME-us seconds in order to arm the second sub-condition of the stan… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21.1.8 | ColumnzxAnXdsl2LConfMaximumSosDs | read-create | current | This parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures in the downstream direction performed within a… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21.1.9 | ColumnzxAnXdsl2LConfMaximumSosUs | read-create | current | This parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures in the upstream direction performed within a 1… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21.1.10 | ColumnzxAnXdsl2LConfSosSnrmOffsetRocDs | read-create | current | The parameter is defined as the SNR margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the channel in… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21.1.11 | ColumnzxAnXdsl2LConfSosSnrmOffsetRocUs | read-create | current | The parameter is defined as the SNR margin offset for the ROC channel in the upstream direction. The parameter is used in the specification of the channel init… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21.1.12 | ColumnzxAnXdsl2LConfSosMinInpRocDs | read-create | current | This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an intege… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21.1.13 | ColumnzxAnXdsl2LConfSosMinInpRocUs | read-create | current | This parameter contains the minimum impulse noise protection to apply on the robust ROC in the upstream direction. The minimum impulse noise protection is an i… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.21.1.50 | ColumnzxAnXdsl2LConfSosPrfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.22 | TablezxAnXdsl2InmConfPrfTable | not-accessible | current | The Line INM Profile Table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.22.1 | RowzxAnXdsl2InmConfPrfEntry | not-accessible | current | Line INM profile entry. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.22.1.1 | ColumnzxAnXdsl2LConfInmPrfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.22.1.2 | ColumnzxAnXdsl2LConfInmInpEqModeUs | read-create | current | INM configuration parameters. This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP, as defined in the r… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.22.1.3 | ColumnzxAnXdsl2LConfInmInpEqModeDs | read-create | current | INM configuration parameters. This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP, as defined in the r… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.22.1.4 | ColumnzxAnXdsl2LConfInmIatoUs | read-create | current | INM configuration parameters. This is the Inter Arrival Time Offset that the xTU receiver shall use to determine in which bin of the Inter Arrival Time histogr… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.22.1.5 | ColumnzxAnXdsl2LConfInmIatoDs | read-create | current | INM configuration parameters. This is the Inter Arrival Time Offset that the xTU receiver shall use to determine in which bin of the Inter Arrival Time histogr… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.22.1.6 | ColumnzxAnXdsl2LConfInmIatsUs | read-create | current | INM configuration parameters. This is the Inter Arrival Time Step that the xTU receiver shall use to determine in which bin of the Inter Arrival Time histogram… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.22.1.7 | ColumnzxAnXdsl2LConfInmIatsDs | read-create | current | INM configuration parameters. This is the Inter Arrival Time Step that the xTU receiver shall use to determine in which bin of the Inter Arrival Time histogram… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.22.1.8 | ColumnzxAnXdsl2LConfInmCcUs | read-create | current | INM configuration parameters. This is the Cluster Continuation value that the xTU receiver shall use in the cluster indication process described in the relevan… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.22.1.9 | ColumnzxAnXdsl2LConfInmCcDs | read-create | current | INM configuration parameters. This is the Cluster Continuation value that the xTU receiver shall use in the cluster indication process described in the relevan… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.22.1.50 | ColumnzxAnXdsl2LConfInmPrfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1015.1001.1.4 | NodezxAnXdsl2AlarmProfile | |||
| 1.3.6.1.4.1.3902.1015.1001.1.4.1 | TablezxAnXdsl2AlmThreshPrfTable | not-accessible | current | The table zxAnXdsl2AlmThreshPrfTable contains DSL line PM thresholds profiles. Entries in this table MUST be maintained in a persistent manner. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1 | RowzxAnXdsl2AlmThreshPrfEntry | not-accessible | current | The table zxAnXdsl2AlmThreshPrfTable contains DSL line PM thresholds profiles. A default profile with an index of 'VDEFVAL' will always exist and its parameter… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.1 | ColumnzxAnXdsl2AlmThreshPrfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.2 | ColumnzxAnXdsl2XtucThreshFecs | read-create | current | A threshold for the xdsl2PMLCurr15MFecs counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.3 | ColumnzxAnXdsl2XtucThreshEs | read-create | current | A threshold for the xdsl2PMLCurr15MEs counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.4 | ColumnzxAnXdsl2XtucThreshSes | read-create | current | A threshold for the xdsl2PMLCurr15MSes counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.5 | ColumnzxAnXdsl2XtucThreshLoss | read-create | current | A threshold for the zxAnXdsl2PMLCurr15MLoss counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated cou… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.6 | ColumnzxAnXdsl2XtucThreshLofs | read-create | current | A threshold for the xdsl2PMLCurr15MLoss counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.7 | ColumnzxAnXdsl2XtucThreshLols | read-create | current | A threshold for the xdsl2PMLCurr15MLoss counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.8 | ColumnzxAnXdsl2XtucThreshLprs | read-create | current | A threshold for the xdsl2PMLCurr15MLoss counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.9 | ColumnzxAnXdsl2XtucThreshUas | read-create | current | A threshold for the zxAnXdsl2PMLCurr15MUas counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated coun… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.10 | ColumnzxAnXdsl2XtucThreshPtmCrcErrs | read-create | current | A threshold for the zxAnXdsl2PMLCurr15MPtmCrcErrs counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associat… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.11 | ColumnzxAnXdsl2XtucThreshPtmCodViol | read-create | current | A threshold for the zxAnXdsl2PMLCurr15MPtmCodViol counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associat… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.12 | ColumnzxAnXdsl2XturThreshFecs | read-create | current | A threshold for the xdsl2PMLCurr15MFecs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.13 | ColumnzxAnXdsl2XturThreshEs | read-create | current | A threshold for the xdsl2PMLCurr15MEs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.14 | ColumnzxAnXdsl2XturThreshSes | read-create | current | A threshold for the xdsl2PMLCurr15MSes counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.15 | ColumnzxAnXdsl2XturThreshLoss | read-create | current | A threshold for the xdsl2PMLCurr15MLoss counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.16 | ColumnzxAnXdsl2XturThreshLofs | read-create | current | A threshold for the xdsl2PMLCurr15MLoss counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.18 | ColumnzxAnXdsl2XturThreshLprs | read-create | current | A threshold for the xdsl2PMLCurr15MLoss counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.19 | ColumnzxAnXdsl2XturThreshUas | read-create | current | A threshold for the xdsl2PMLCurr15MUas counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.20 | ColumnzxAnXdsl2XturThreshPtmCrcErrs | read-create | current | A threshold for the zxAnXdsl2PMLCurr15MPtmCrcErrs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associat… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.21 | ColumnzxAnXdsl2XturThreshPtmCodViol | read-create | current | A threshold for the zxAnXdsl2PMLCurr15MPtmCodViol counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associat… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.22 | ColumnzxAnXdsl2ThreshFailedFullInt | read-create | current | A threshold for the xdsl2PMLCurrInit15MfailedFullInits counter. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.23 | ColumnzxAnXdsl2ThreshFailedShrtInt | read-create | current | A threshold for the xdsl2PMLCurrInit15MFailedShortInits counter. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.24 | ColumnzxAnXdsl2Ch1XtucThrshCodeViol | read-create | current | A threshold for the xdsl2PMChCurr15MCodingViolations counter, when xdsl2PMChCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the asso… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.25 | ColumnzxAnXdsl2Ch1XtucThrshCorrected | read-create | current | A threshold for the xdsl2PMChCurr15MCorrectedBlocks counter, when xdsl2PMChCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the assoc… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.26 | ColumnzxAnXdsl2Ch1XturThrshCodeViol | read-create | current | A threshold for the xdsl2PMChCurr15MCodingViolations counter, when xdsl2PMChCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the asso… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.27 | ColumnzxAnXdsl2Ch1XturThrshCorrected | read-create | current | A threshold for the xdsl2PMChCurr15MCorrectedBlocks counter, when xdsl2PMChCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the assoc… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.28 | ColumnzxAnXdsl2Ch2XtucThrshCodeViol | read-create | current | A threshold for the xdsl2PMChCurr15MCodingViolations counter, when xdsl2PMChCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the asso… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.29 | ColumnzxAnXdsl2Ch2XtucThrshCorrected | read-create | current | A threshold for the xdsl2PMChCurr15MCorrectedBlocks counter, when xdsl2PMChCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the assoc… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.30 | ColumnzxAnXdsl2Ch2XturThrshCodeViol | read-create | current | A threshold for the xdsl2PMChCurr15MCodingViolations counter, when xdsl2PMChCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the asso… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.31 | ColumnzxAnXdsl2Ch2XturThrshCorrected | read-create | current | A threshold for the xdsl2PMChCurr15MCorrectedBlocks counter, when xdsl2PMChCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the assoc… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.32 | ColumnzxAnXdsl2AlmThreshPrfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.33 | ColumnzxAnXdsl2XtucLowDataRateTolerance | read-create | current | Tolerance between zxAnXdsl2ChConfMaxDataRateDs and xdsl2ChStatusActDataRate(xtuc). Calculation: 100*(zxAnXdsl2ChConfMaxDataRateDs - xdsl2ChStatusActDataRate(xt… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.34 | ColumnzxAnXdsl2XturLowDataRateTolerance | read-create | current | Tolerance between zxAnXdsl2ChConfMaxDataRateUs and xdsl2ChStatusActDataRate(xtur). Calculation: 100*(zxAnXdsl2ChConfMaxDataRateUs - xdsl2ChStatusActDataRate(xt… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.35 | ColumnzxAnXdsl2XtucLowDataRateThresh | read-create | current | Threshold of xtuc data rate. If xdsl2ChStatusActDataRate(xtuc) is lower than zxAnXdsl2XtucLowDataRateThresh, zxAnXdsl2LineXtucLowDataRateTrap will be sent. A v… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.36 | ColumnzxAnXdsl2XturLowDataRateThresh | read-create | current | Threshold of xtur data rate. If xdsl2ChStatusActDataRate(xtur) is lower than zxAnXdsl2XturLowDataRateThresh, zxAnXdsl2LineXturLowDataRateTrap will be sent. A v… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.37 | ColumnzxAnXdsl2XtucInitFailTrapEnable | read-create | current | Enables and disables the InitFailureTrap on the xTU-C interface. unused1 (0) - This bit is no use to enable or disable the InitFailureTrap on the xTU-C interfa… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.38 | ColumnzxAnXdsl2XturInitFailTrapEnable | read-create | current | Enables and disables the InitFailureTrap on the xTU-R interface. unused1 (0) - This bit is no use to enable or disable the InitFailureTrap on the xTU-R interfa… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.39 | ColumnzxAnXdsl2XtucThreshInpLeftr | read-create | current | The LEFTR_THRESH is a configuration parameter that is used to derive the control parameter leftr_thresh, which specifies the fraction of NDR that shall be used… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.40 | ColumnzxAnXdsl2XturThreshInpLeftr | read-create | current | The LEFTR_THRESH is a configuration parameter that is used to derive the control parameter leftr_thresh, which specifies the fraction of NDR that shall be used… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.41 | ColumnzxAnXdsl2XtucEsLossRatioThresh | read-create | current | XTU-C vectoring error sample loss ratio between zxAnXdsl2PMLCurr1DayTxEsPkts and zxAnXdsl2PMLCurr1DayRxEsPkts. Calculation: Difference= 100 * (zxAnXdsl2PMLCurr… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.42 | ColumnzxAnXdsl2XturEsLossRatioThresh | read-create | current | XTU-R error sample loss ratio between zxAnXdsl2PMLCurr1DayTxEsPkts and zxAnXdsl2PMLCurr1DayRxEsPkts. Calculation: Difference= 100 * (zxAnXdsl2PMLCurr1DayTxEsPk… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.43 | ColumnzxAnXdsl2XtucThreshInpLeftrs | read-create | current | A threshold for the zxAnXdsl2PMChCurr15MInpLeftrs counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associat… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.44 | ColumnzxAnXdsl2XturThreshInpLeftrs | read-create | current | A threshold for the zxAnXdsl2PMChCurr15MInpLeftrs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associat… |
| 1.3.6.1.4.1.3902.1015.1001.1.5 | NodezxAnXdsl2PMLine | |||
| 1.3.6.1.4.1.3902.1015.1001.1.5.1 | TablezxAnXdsl2PMLineCurrTable | not-accessible | current | The table zxAnXdsl2PMLineCurrTable contains current Performance Monitoring results of DSL line. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1 | RowzxAnXdsl2PMLineCurrEntry | not-accessible | current | The table zxAnXdsl2PMLineCurrTable contains current Performance Monitoring results of DSL line. The index of this table is an interface index where the interfa… |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.1 | ColumnzxAnXdsl2PMLCurr15MLofs | read-only | current | Count of seconds during this interval that there was LOF . |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.2 | ColumnzxAnXdsl2PMLCurr15MLols | read-only | current | Count of seconds during this interval that there was LOL. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.3 | ColumnzxAnXdsl2PMLCurr15MLprs | read-only | current | Count of seconds during this interval that there was LPR. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.4 | ColumnzxAnXdsl2PMLCurr15MPtmCrcErrs | read-only | current | Count of the number of occurrences of Ptm Crc Errors during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.5 | ColumnzxAnXdsl2PMLCurr15MPtmCodViol | read-only | current | Count of the number of occurrences of Ptm coding violations during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.6 | ColumnzxAnXdsl2PMLCurr1DayLofs | read-only | current | Count of seconds during this interval that there was LOF. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.7 | ColumnzxAnXdsl2PMLCurr1DayLols | read-only | current | Count of seconds during this interval that there was LOL. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.8 | ColumnzxAnXdsl2PMLCurr1DayLprs | read-only | current | Count of seconds during this interval that there was LPR. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.9 | ColumnzxAnXdsl2PMLCurr1DayPtmCrcErrs | read-only | current | Count of the number of occurrences of Ptm Crc Errors during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.10 | ColumnzxAnXdsl2PMLCurr1DayPtmCodViol | read-only | current | Count of the number of occurrences of Ptm coding violations during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.11 | ColumnzxAnXdsl2PMLCurr15MInmInpEq | read-only | current | INM parameters. The integer sequence of INM INPEQ histogram 1..17. Each parameter is a count of the INMAINPEQi anomalies occurring on the line during the accum… |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.12 | ColumnzxAnXdsl2PMLCurr15MInmMe | read-only | current | INM parameters. This parameter is a count of the INMAME anomalies occurring on the line during the accumulation period. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.13 | ColumnzxAnXdsl2PMLCurr15MInmIat | read-only | current | INM parameters. This parameter is a count of the INMAIATi(0-7) anomalies occurring on the line during the accumulation period. Each parameter is presented with… |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.14 | ColumnzxAnXdsl2PMLCurr1DayInmInpEq | read-only | current | INM parameters. The integer sequence of INM INPEQ histogram 1..17. Each parameter is a count of the INMAINPEQi anomalies occurring on the line during the accum… |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.15 | ColumnzxAnXdsl2PMLCurr1DayInmMe | read-only | current | INM parameters. This parameter is a count of the INMAME anomalies occurring on the line during the accumulation period. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.16 | ColumnzxAnXdsl2PMLCurr1DayInmIat | read-only | current | INM parameters. This parameter is a count of the INMAIATi(0-7) anomalies occurring on the line during the accumulation period. Each parameter is presented with… |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.17 | ColumnzxAnXdsl2PMLCurr15MSosSuccess | read-only | current | This parameter is a count of the total number of successful SOS procedures initiated on the line during the accumulation period. Parameter procedures shall be … |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.18 | ColumnzxAnXdsl2PMLCurr1DaySosSuccess | read-only | current | This parameter is a count of the total number of successful SOS procedures initiated on the line during the accumulation period. Parameter procedures shall be … |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.27 | ColumnzxAnXdsl2PMLCurr15MTxEsPkts | read-only | current | Transmitted erorr sample packets during 15 minutes. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.28 | ColumnzxAnXdsl2PMLCurr15MRxEsPkts | read-only | current | Received erorr sample packets during 15 minutes. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.29 | ColumnzxAnXdsl2PMLCurr1DayTxEsPkts | read-only | current | Transmitted erorr sample packets during 1 day. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.30 | ColumnzxAnXdsl2PMLCurr1DayRxEsPkts | read-only | current | Received erorr sample packets during 1 day. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2 | TablezxAnXdsl2PMLineHist15MinTable | not-accessible | current | The table zxAnXdsl2PMLineHist15MinTable contains history Performance Monitoring results for 15min of DSL line. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1 | RowzxAnXdsl2PMLineHist15MinEntry | not-accessible | current | The table zxAnXdsl2PMLineHist15MinTable contains history Performance Monitoring results for 15min of DSL line. The index of this table is an interface index wh… |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.1 | ColumnzxAnXdsl2PMLHist15MMonitoredTime | read-only | current | Total seconds monitored in this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.2 | ColumnzxAnXdsl2PMLHist15MLofs | read-only | current | Count of seconds during this interval that there was LOF . |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.3 | ColumnzxAnXdsl2PMLHist15MLols | read-only | current | Count of seconds during this interval that there was LOL. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.4 | ColumnzxAnXdsl2PMLHist15MLprs | read-only | current | Count of seconds during this interval that there was LPR. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.5 | ColumnzxAnXdsl2PMLHist15MPtmCrcErrs | read-only | current | Count of the number of occurrences of Ptm Crc Errors during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.6 | ColumnzxAnXdsl2PMLHist15MPtmCodViol | read-only | current | Count of the number of occurrences of Ptm coding violations during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.7 | ColumnzxAnXdsl2PMLHist15MValidInterval | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.8 | ColumnzxAnXdsl2PMLHist15MInmInpEq | read-only | current | INM parameters. The integer sequence of INM INPEQ histogram 1..17. Each parameter is a count of the INMAINPEQi anomalies occurring on the line during the accum… |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.9 | ColumnzxAnXdsl2PMLHist15MInmMe | read-only | current | INM parameters. This parameter is a count of the INMAME anomalies occurring on the line during the accumulation period. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.10 | ColumnzxAnXdsl2PMLHist15MInmIat | read-only | current | INM parameters. This parameter is a count of the INMAIATi(0-7) anomalies occurring on the line during the accumulation period. Each parameter is presented with… |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.11 | ColumnzxAnXdsl2PMLHist15MSosSuccess | read-only | current | This parameter is a count of the total number of successful SOS procedures initiated on the line during the accumulation period. Parameter procedures shall be … |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.16 | ColumnzxAnXdsl2PMLHist15MTxEsPkts | read-only | current | Transmitted error sample packets during 15 minutes. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.17 | ColumnzxAnXdsl2PMLHist15MRxEsPkts | read-only | current | Received error sample packets during 15 minutes. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.3 | TablezxAnXdsl2PMLineHist1DayTable | not-accessible | current | The table zxAnXdsl2PMLineHist1DayTable contains history Performance Monitoring results for 1 Day of DSL line. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.3.1 | RowzxAnXdsl2PMLineHist1DayEntry | not-accessible | current | The table zxAnXdsl2PMLineHist1DayTable contains history Performance Monitoring results for 1Day of DSL line. The index of this table is an interface index wher… |
| 1.3.6.1.4.1.3902.1015.1001.1.5.3.1.1 | ColumnzxAnXdsl2PMLHist1DayMonitoredTime | read-only | current | Total seconds monitored in this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.3.1.2 | ColumnzxAnXdsl2PMLHist1DayLofs | read-only | current | Count of seconds during this interval that there was LOF . |
| 1.3.6.1.4.1.3902.1015.1001.1.5.3.1.3 | ColumnzxAnXdsl2PMLHist1DayLols | read-only | current | Count of seconds during this interval that there was LOL. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.3.1.4 | ColumnzxAnXdsl2PMLHist1DayLprs | read-only | current | Count of seconds during this interval that there was LPR. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.3.1.5 | ColumnzxAnXdsl2PMLHist1DayPtmCrcErrs | read-only | current | Count of the number of occurrences of Ptm Crc Errors during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.3.1.6 | ColumnzxAnXdsl2PMLHist1DayPtmCodViol | read-only | current | Count of the number of occurrences of Ptm coding violations during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.3.1.7 | ColumnzxAnXdsl2PMLHist1DayValidInterval | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.3.1.8 | ColumnzxAnXdsl2PMLHist1DayInmInpEq | read-only | current | INM parameters. The integer sequence of INM INPEQ histogram 1..17. Each parameter is a count of the INMAINPEQi anomalies occurring on the line during the accum… |
| 1.3.6.1.4.1.3902.1015.1001.1.5.3.1.9 | ColumnzxAnXdsl2PMLHist1DayInmMe | read-only | current | INM parameters. This parameter is a count of the INMAME anomalies occurring on the line during the accumulation period. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.3.1.10 | ColumnzxAnXdsl2PMLHist1DayInmIat | read-only | current | INM parameters. This parameter is a count of the INMAIATi(0-7) anomalies occurring on the line during the accumulation period. Each parameter is presented with… |
| 1.3.6.1.4.1.3902.1015.1001.1.5.3.1.11 | ColumnzxAnXdsl2PMLHist1DaySosSuccess | read-only | current | This parameter is a count of the total number of successful SOS procedures initiated on the line during the accumulation period. Parameter procedures shall be … |
| 1.3.6.1.4.1.3902.1015.1001.1.5.3.1.16 | ColumnzxAnXdsl2PMLHist1DayTxEsPkts | read-only | current | Transmitted error sample packets during 1 day. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.3.1.17 | ColumnzxAnXdsl2PMLHist1DayRxEsPkts | read-only | current | Received error sample packets during 1 day. |
| 1.3.6.1.4.1.3902.1015.1001.1.6 | NodezxAnXdsl2PMChannel | |||
| 1.3.6.1.4.1.3902.1015.1001.1.6.1 | TablezxAnXdsl2PMChCurrTable | not-accessible | current | The table zxAnXdsl2PMChCurrTable contains current Performance Monitoring results of DSL Channel. |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1 | RowzxAnXdsl2PMChCurrEntry | not-accessible | current | The table zxAnXdsl2PMChCurrTable contains current Performance Monitoring results of DSL Channel. The index of this table is an interface index where the interf… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1.1 | ColumnzxAnXdsl2PMChCurr15MRtxDtu | read-only | current | this is a counter that is incremented each time a DTU has been retransmitted by the transmitter in the current 15 minute interval. Multiple retransmission of t… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1.2 | ColumnzxAnXdsl2PMChCurr15MRtxCDtu | read-only | current | This is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission in the current 15 minu… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1.3 | ColumnzxAnXdsl2PMChCurr15MRtxUcDtu | read-only | current | This is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission in the current 15 minute interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1.4 | ColumnzxAnXdsl2PMChCurr15MInpLeftrs | read-only | current | This is a counter of seconds with a 'leftr' defect present. It is a 32-bit wrap-around counter. The counter shall be reset at power-on. The counters shall not … |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1.5 | ColumnzxAnXdsl2PMChCurr15MInpEfb | read-only | current | This is a counter counting the number of error-free bits passed over the beta1-reference point, deivided by 2^16. Error-free bits are bits originating from DTU… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1.6 | ColumnzxAnXdsl2PMChCurr15MInpMinEftr | read-only | current | The performance monitoring parameter minimum error-free throughput(EFTR_min) is defined as the minimum of the EFTR observed since the last reading of the EFTR_… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1.51 | ColumnzxAnXdsl2PMChCurr1DayRtxDtu | read-only | current | This is a counter that is incremented each time a DTU has been retransmitted by the transmitter in the current day interval. Multiple retransmission of the sam… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1.52 | ColumnzxAnXdsl2PMChCurr1DayRtxCDtu | read-only | current | This is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission in the current day int… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1.53 | ColumnzxAnXdsl2PMChCurr1DayRtxUcDtu | read-only | current | This is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission. |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1.54 | ColumnzxAnXdsl2PMChCurr1DayInpLeftrs | read-only | current | This is a counter of seconds with a 'leftr' defect present. It is a 32-bit wrap-around counter. The counter shall be reset at power-on. The counters shall not … |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1.55 | ColumnzxAnXdsl2PMChCurr1DayInpEfb | read-only | current | This is a counter counting the number of error-free bits passed over the beta1-reference point, deivided by 2^16. Error-free bits are bits originating from DTU… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1.56 | ColumnzxAnXdsl2PMChCurr1DayInpMinEftr | read-only | current | The performance monitoring parameter minimum error-free throughput(EFTR_min) is defined as the minimum of the EFTR observed since the last reading of the EFTR_… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1.101 | ColumnzxAnXdsl2PMChCurrTransmittedBlks | read-only | current | Count of blocks transmitted since last reset. This parameter represents ATM cells for ATM mode, and PTM packets for PTM mode. |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1.102 | ColumnzxAnXdsl2PMChCurrOverflowBlks | read-only | current | Count of overflow blocks since last reset. This parameter represents ATM cells for ATM mode, and PTM packets for PTM mode. |
| 1.3.6.1.4.1.3902.1015.1001.1.6.1.1.103 | ColumnzxAnXdsl2PMChCurrErroredBlks | read-only | current | Count of errored blocks since last reset. This parameter represents ATM cells for ATM mode, and PTM packets for PTM mode. |
| 1.3.6.1.4.1.3902.1015.1001.1.6.2 | TablezxAnXdsl2PMChHist15MinTable | not-accessible | current | The table zxAnXdsl2PMChHist15MinTable contains history Performance Monitoring results for 15min of DSL channel. |
| 1.3.6.1.4.1.3902.1015.1001.1.6.2.1 | RowzxAnXdsl2PMChHist15MinEntry | not-accessible | current | The table zxAnXdsl2PMChHist15MinTable contains history Performance Monitoring results for 15min of DSL channel. The index of this table is an interface index w… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.2.1.1 | ColumnzxAnXdsl2PMChHist15MRtxDtu | read-only | current | This is a counter that is incremented each time a DTU has been retransmitted by the transmitter during this interval. Multiple retransmission of the same DTU i… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.2.1.2 | ColumnzxAnXdsl2PMChHist15MRtxCDtu | read-only | current | This is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.6.2.1.3 | ColumnzxAnXdsl2PMChHist15MRtxUcDtu | read-only | current | This is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission. during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.6.2.1.4 | ColumnzxAnXdsl2PMChHist15MInpLeftrs | read-only | current | This is a counter of seconds with a 'leftr' defect present. It is a 32-bit wrap-around counter. The counter shall be reset at power-on. The counters shall not … |
| 1.3.6.1.4.1.3902.1015.1001.1.6.2.1.5 | ColumnzxAnXdsl2PMChHist15MInpEfb | read-only | current | This is a counter counting the number of error-free bits passed over the beta1-reference point, deivided by 2^16. Error-free bits are bits originating from DTU… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.2.1.6 | ColumnzxAnXdsl2PMChHist15MInpMinEftr | read-only | current | The performance monitoring parameter minimum error-free throughput(EFTR_min) is defined as the minimum of the EFTR observed since the last reading of the EFTR_… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.3 | TablezxAnXdsl2PMChHist1DayTable | not-accessible | current | The table zxAnXdsl2PMChHist1DayTable contains history Performance Monitoring results for 1 Day of DSL channel. |
| 1.3.6.1.4.1.3902.1015.1001.1.6.3.1 | RowzxAnXdsl2PMChHist1DayEntry | not-accessible | current | The table zxAnXdsl2PMChHist1DayTable contains history Performance Monitoring results for 1Day of DSL channel. The index of this table is an interface index whe… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.3.1.1 | ColumnzxAnXdsl2PMChHist1DayRtxDtu | read-only | current | This is a counter that is incremented each time a DTU has been retransmitted by the transmitter during this interval. Multiple retransmission of the same DTU i… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.3.1.2 | ColumnzxAnXdsl2PMChHist1DayRtxCDtu | read-only | current | This is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retransmission during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.6.3.1.3 | ColumnzxAnXdsl2PMChHist1DayRtxUcDtu | read-only | current | This is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.6.3.1.4 | ColumnzxAnXdsl2PMChHist1DayInpLeftrs | read-only | current | This is a counter of seconds with a 'leftr' defect present. It is a 32-bit wrap-around counter. The counter shall be reset at power-on. The counters shall not … |
| 1.3.6.1.4.1.3902.1015.1001.1.6.3.1.5 | ColumnzxAnXdsl2PMChHist1DayInpEfb | read-only | current | This is a counter counting the number of error-free bits passed over the beta1-reference point, deivided by 2^16. Error-free bits are bits originating from DTU… |
| 1.3.6.1.4.1.3902.1015.1001.1.6.3.1.6 | ColumnzxAnXdsl2PMChHist1DayInpMinEftr | read-only | current | The performance monitoring parameter minimum error-free throughput(EFTR_min) is defined as the minimum of the EFTR observed since the last reading of the EFTR_… |
| 1.3.6.1.4.1.3902.1015.1001.1.7 | NodezxAnXdsl2LineTest | |||
| 1.3.6.1.4.1.3902.1015.1001.1.7.1 | TablezxAnXdsl2SeltConfTable | not-accessible | current | The table zxAnXdsl2SeltConfTable contains configuration parameters for SELT test. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1 | RowzxAnXdsl2SeltConfEntry | not-accessible | current | The entry of zxAnXdsl2SeltConfTable. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1.1 | ColumnzxAnXdsl2LnSeltCmndConfLdsf | read-write | current | Command:Loop diagnostics mode forced (LDSF). Defines whether the line should be forced into the loop diagnostics mode by the near-end xTU on this line or only … |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1.2 | ColumnzxAnXdsl2SeltUerMmd | read-write | current | SELT UER Maximum Measurement Duration. This parameter is the maximum allowed time for SELT Uncalibrated Echo Response measurement, between the time of the star… |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1.3 | ColumnzxAnXdsl2SeltQlnMmd | read-write | current | SELT Quiet Line Noise Maximum Measurement Duration. This parameter is the maximum allowed time for SELT quiet line noise measurement, between the time of the s… |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1.4 | ColumnzxAnXdsl2SeltCece | read-write | current | Capacity Estimate Calculation Enabling. This parameter specifies if the SELT-P function shall perform the Downstream capacity and Upstream capacity estimation,… |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1.5 | ColumnzxAnXdsl2SeltCapSignalPsdDs | read-write | current | Capacity Estimate Signal PSD Downstream. This configuration parameter defines the PSD template of the transmit signal to be used in capacity estimate evaluatio… |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1.6 | ColumnzxAnXdsl2SeltCapSignalPsdUs | read-write | current | Capacity Estimate Signal PSD Upstream. This configuration parameter defines the PSD template of the transmit signal to be used in capacity estimate evaluation.… |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1.7 | ColumnzxAnXdsl2SeltCapNoisePsdDs | read-write | current | Capacity Estimate Noise PSD Downstream. This configuration parameter defines the PSD template of the transmit signal to be used in capacity estimate evaluation… |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1.8 | ColumnzxAnXdsl2SeltCapNoisePsdUs | read-write | current | Capacity Estimate Noise PSD Upstream. This configuration parameter defines the PSD template of the transmit signal to be used in capacity estimate evaluation. … |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1.9 | ColumnzxAnXdsl2SeltCapTargetSnrmDs | read-write | current | Capacity Estimate Target Noise Margin Downstream. This is the Noise Margin to be used in capacity estimate evaluation, relative to a BER requirement of 1E-7. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1.10 | ColumnzxAnXdsl2SeltCapTargetSnrmUs | read-write | current | Capacity Estimate Target Noise Margin Upstream. This is the Noise Margin to be used in capacity estimate evaluation, relative to a BER requirement of 1E-7. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1.11 | ColumnzxAnXdsl2SeltUerMeasureEnableC | read-write | current | This parameter is a binary variable, where '1' triggers the CO SELT PMD to start a UER measurement. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1.12 | ColumnzxAnXdsl2SeltQlnMeasureEnableC | read-write | current | This parameter is a binary variable, where '1' triggers the CO SELT PMD to start a QLN measurement. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1.13 | ColumnzxAnXdsl2SeltCalibrateCmd | read-write | current | Execute this command to calibrate the parameter that is used to calculate the SELT result. When execute this command before SELT, the test result will be more … |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1.14 | ColumnzxAnXdsl2SeltRawDataCmd | read-write | current | Defines whether the line should be forced into SELT raw data test mode. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.1.1.15 | ColumnzxAnXdsl2SeltQuickTestEnable | read-write | current | Enable/disable the quick SELT test. enabled(1) - Start the SELT test with quick mode. disabled(2) - Start the SELT test with normal mode. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.2 | TablezxAnXdsl2SeltLineStatusTable | not-accessible | current | The table zxAnXdsl2SeltLineStatusTable contains line status result of SELT test. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.2.1 | RowzxAnXdsl2SeltLineStatusEntry | not-accessible | current | The entry of zxAnXdsl2SeltLineStatusTable. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.2.1.1 | ColumnzxAnXdsl2SeltLoopTermStatus | read-only | current | Loop Termination Indicator is a state indication of the loop termination. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.2.1.2 | ColumnzxAnXdsl2SeltLoopLength | read-only | current | This parameter is the physical length (in meters) of the loop between the U-C and the U-R interface. The loop length shall be measured with a granularity of 1 … |
| 1.3.6.1.4.1.3902.1015.1001.1.7.2.1.3 | ColumnzxAnXdsl2SeltLoopTopology | read-only | current | The Loop Topology without cable-type identification is consists of a list of segments that are represented by (len1,gauge1,term1,bt1), (len2,gauge2,term2,bt2).… |
| 1.3.6.1.4.1.3902.1015.1001.1.7.2.1.4 | ColumnzxAnXdsl2SeltSplitterMissing | read-only | current | This parameter is a indication of a missing or incorrectly installed splitter or micro-filter at the U-R reference point. The value of true means missing split… |
| 1.3.6.1.4.1.3902.1015.1001.1.7.2.1.5 | ColumnzxAnXdsl2SeltLineAtten | read-only | current | The line attenuation TFlog(f) is the logarithmic power transfer function of the line as a function of frequency when both the near-end and far-end line termina… |
| 1.3.6.1.4.1.3902.1015.1001.1.7.2.1.6 | ColumnzxAnXdsl2SeltCapacityDs | read-only | current | This parameter represents a best-effort estimate of the achievable downstream data rate (in kbit/s) on the loop under test. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.2.1.7 | ColumnzxAnXdsl2SeltCapacityUs | read-only | current | This parameter represents a best-effort estimate of the achievable upstream data rate (in kbit/s) on the loop under test. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.2.1.8 | ColumnzxAnXdsl2SeltUerScale | read-only | current | The scale factor for SELT Uncalibrated Echo Response, it shall be coded as a 32 bit unsigned integer. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.2.1.9 | ColumnzxAnXdsl2SeltCerScale | read-only | deprecated | The scale factor for SELT Calibrated Echo Response, it shall be coded as a 32 bit unsigned integer. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.2.1.10 | ColumnzxAnXdsl2SeltTestStatus | read-only | current | Possible failure reasons associated with performing Single Ended Loop Test (SELT) on a DSL line. Possible values are: none (1) - The default value in case LDSF… |
| 1.3.6.1.4.1.3902.1015.1001.1.7.2.1.11 | ColumnzxAnXdsl2SeltCapabilities | read-only | current | The management capabilities of VDSL card. bit 0: value 1 means support zxAnXdsl2SeltRawDataCmd. bit 1: value 1 means support zxAnXdsl2SeltCalibrateCmd. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.2.1.12 | ColumnzxAnXdsl2SeltChipsetType | read-only | current | Chipset type. Possible values are: lantiq (1) - Use LANTIQ chipset. bcm (2) - Use BCM chipset. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.3 | TablezxAnXdsl2SeltSCStatusTable | not-accessible | current | The table zxAnXdsl2SeltSCStatusTable contains subcarrier status result of SELT test. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.3.1 | RowzxAnXdsl2SeltSCStatusEntry | not-accessible | current | The entry of zxAnXdsl2SeltSCStatusTable. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.3.1.1 | ColumnzxAnXdsl2SeltUerReal | read-only | current | The Uncalibrated Echo Response UER(i* UER_G*Df), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i i… |
| 1.3.6.1.4.1.3902.1015.1001.1.7.3.1.2 | ColumnzxAnXdsl2SeltUerImg | read-only | current | The Uncalibrated Echo Response UER(i* UER_G*Df), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i i… |
| 1.3.6.1.4.1.3902.1015.1001.1.7.3.1.3 | ColumnzxAnXdsl2SeltVuer | read-only | current | SELT Variance of Uncalibrated Echo Response. The REL_VAR_UER(f) provides the relative variance of the uncalibrated echo response by the SELT-PMD function for e… |
| 1.3.6.1.4.1.3902.1015.1001.1.7.3.1.4 | ColumnzxAnXdsl2SeltQln | read-only | current | The SELT Quiet Line noise provides the quiet line noise PSD as measured by the SELT-PMD function (see #A.1.1.2) for each sub-carrier frequency i X SELTQLN_G X … |
| 1.3.6.1.4.1.3902.1015.1001.1.7.3.1.5 | ColumnzxAnXdsl2SeltCerReal | read-only | deprecated | The Calibrated Echo Response UER(i* UER_G*Df), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i is … |
| 1.3.6.1.4.1.3902.1015.1001.1.7.3.1.6 | ColumnzxAnXdsl2SeltCerImg | read-only | deprecated | The Calibrated Echo Response UER(i* UER_G*Df), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i is … |
| 1.3.6.1.4.1.3902.1015.1001.1.7.4 | TablezxAnXdsl2MeltConfTable | not-accessible | current | The metallic line testing configuration table. This table describes specifications for metallic line testing (MELT) configuration. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.4.1 | RowzxAnXdsl2MeltConfEntry | not-accessible | current | The metallic line testing configuration entry. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.4.1.1 | ColumnzxAnXdsl2MeltCmndConfLdsf | read-write | current | This object indicates which kind of measurements is to be done. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.4.1.2 | ColumnzxAnXdsl2MeltPeakMetallicVtr | read-write | current | Peak metallic voltage between tip and ring. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.4.1.3 | ColumnzxAnXdsl2MeltMaxFarendConductVtr | read-write | current | Maximum far-end signature conduction voltage. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.4.1.4 | ColumnzxAnXdsl2MeltMinFarendConductVtr | read-write | current | Minimum far-end signature conduction voltage. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.4.1.5 | ColumnzxAnXdsl2MeltPairIdToneCmd | read-write | current | Start/stop the pair identification tone generation. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.4.1.6 | ColumnzxAnXdsl2MeltPairIdToneFreq | read-write | current | This parameter sets up frequency of the pair identification tone |
| 1.3.6.1.4.1.3902.1015.1001.1.7.4.1.7 | ColumnzxAnXdsl2MeltWettingCurrentCmd | read-write | current | Start/stop a wetting current to prevent contact oxidation on the subscriber line. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5 | TablezxAnXdsl2MeltStatusTable | not-accessible | current | The metallic line testing status table. This table describes specifications for metallic line testing (MELT) status. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1 | RowzxAnXdsl2MeltStatusEntry | not-accessible | current | The metallic line testing status entry. Mib format: zxAnXdsl2Melt[Ac/Dc][A/R/C/V/F/G/B][tg/rg/tr/rt]. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.1 | ColumnzxAnXdsl2MeltLdsfResult | read-only | current | The status of the recent occasion the loop diagnostics mode forced (LDSF) was issued for the associated line. Possible values are: none (1) - The default value… |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.2 | ColumnzxAnXdsl2MeltDcAtg | read-only | current | DC current between tip and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.3 | ColumnzxAnXdsl2MeltDcArg | read-only | current | DC current between ring and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.4 | ColumnzxAnXdsl2MeltAcAtg | read-only | current | AC current between tip and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.5 | ColumnzxAnXdsl2MeltAcArg | read-only | current | AC current between ring and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.6 | ColumnzxAnXdsl2MeltDcRtr | read-only | current | DC resistance between tip and ring. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.7 | ColumnzxAnXdsl2MeltDcRrt | read-only | current | DC resistance between ring and tip. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.8 | ColumnzxAnXdsl2MeltDcRtg | read-only | current | DC resistance between tip and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.9 | ColumnzxAnXdsl2MeltDcRrg | read-only | current | DC resistance between ring and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.10 | ColumnzxAnXdsl2MeltCtr | read-only | current | Capacitance between tip and ring. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.11 | ColumnzxAnXdsl2MeltCtg | read-only | current | Capacitance between tip and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.12 | ColumnzxAnXdsl2MeltCrg | read-only | current | Capacitance between ring and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.13 | ColumnzxAnXdsl2MeltDcVtr | read-only | current | Foreign DC voltage between tip and ring. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.14 | ColumnzxAnXdsl2MeltDcVtg | read-only | current | Foreign DC voltage between tip and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.15 | ColumnzxAnXdsl2MeltDcVrg | read-only | current | Foreign DC voltage between ring and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.16 | ColumnzxAnXdsl2MeltAcVtr | read-only | current | Foreign AC root mean square (RMS) voltage between tip and ring. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.17 | ColumnzxAnXdsl2MeltAcVtg | read-only | current | Foreign AC root mean square (RMS) voltage between tip and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.18 | ColumnzxAnXdsl2MeltAcVrg | read-only | current | Foreign AC root mean square (RMS) voltage between ring and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.19 | ColumnzxAnXdsl2MeltAcFtr | read-only | current | Foreign AC voltage frequency between tip and ring. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.20 | ColumnzxAnXdsl2MeltAcFtg | read-only | current | Foreign AC voltage frequency between tip and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.21 | ColumnzxAnXdsl2MeltAcFrg | read-only | current | Foreign AC voltage frequency between ring and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.22 | ColumnzxAnXdsl2MeltGtr | read-only | current | Conductance between tip and ring. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.23 | ColumnzxAnXdsl2MeltBtr | read-only | current | Susceptance between tip and ring. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.24 | ColumnzxAnXdsl2MeltGtg | read-only | current | Conductance between tip and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.25 | ColumnzxAnXdsl2MeltBtg | read-only | current | Susceptance between tip and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.26 | ColumnzxAnXdsl2MeltGrg | read-only | current | Conductance between ring and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.27 | ColumnzxAnXdsl2MeltBrg | read-only | current | Susceptance between ring and ground. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.5.1.28 | ColumnzxAnXdsl2MeltPpaResistance | read-only | current | This object contains the resistance of a detectd PPA(Passive Test Termination). 0xFFFFFFFF means that is unsupported. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.6 | TablezxAnXdsl2SeltRawDataTable | not-accessible | current | This table describes the result of SELT raw data test. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.6.1 | RowzxAnXdsl2SeltRawDataEntry | not-accessible | current | The SELT raw data entry. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.6.1.1 | ColumnzxAnXdsl2RawDataSegment | not-accessible | current | An index for the array of raw data SELT result. |
| 1.3.6.1.4.1.3902.1015.1001.1.7.6.1.2 | ColumnzxAnXdsl2SeltRawData | read-only | current | The raw data test result shall be stored and reported to the management entity for the further calculation and analysis. ALL the datas were divided into severa… |
| 1.3.6.1.4.1.3902.1015.1001.1.8 | NodezxAnXdsl2Vectoring | |||
| 1.3.6.1.4.1.3902.1015.1001.1.8.1 | NodezxAnXdsl2VectoringGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.1001.1.8.1.1 | ScalarzxAnXdsl2VectorTrackingEnable | read-write | current | Enable/disable vectoring tracking. enabled(1) - Update the channel matrix automatically. disabled(2)- Update the channel matrix when link is up or down. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.2 | TablezxAnXdsl2FextCoefficientTable | not-accessible | current | The FEXT coefficient table. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.2.1 | RowzxAnXdsl2FextCoefficientEntry | not-accessible | current | The FEXT coefficient entry. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.2.1.1 | ColumnzxAnXdsl2FextSrcIfIndex | not-accessible | current | An index for a FEXT source port. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.2.1.2 | ColumnzxAnXdsl2FextDstIfIndex | not-accessible | current | An index for a FEXT destination port. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.2.1.3 | ColumnzxAnXdsl2FextCoefficientDs | read-only | current | The downstream FEXT coupling coefficient shall be stored and reported to the management entity upon request at least for all pairs of line indices(i, j) in the… |
| 1.3.6.1.4.1.3902.1015.1001.1.8.2.1.4 | ColumnzxAnXdsl2FextCoefficientUs | read-only | current | The upstream FEXT coupling coefficient. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.3 | TablezxAnXdsl2VectoringCardTable | not-accessible | current | The vectoring card table. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.3.1 | RowzxAnXdsl2VectoringCardEntry | not-accessible | current | The vectoring card table entry. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.3.1.1 | ColumnzxAnXdsl2VectoringRack | not-accessible | current | Rack No.. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.3.1.2 | ColumnzxAnXdsl2VectoringShelf | not-accessible | current | Shelf No.. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.3.1.3 | ColumnzxAnXdsl2VectoringSlot | not-accessible | current | Card No.. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.3.1.4 | ColumnzxAnXdsl2VectoringConfigClear | read-write | current | Set value to '1' to clear the card vectoring configuration before plugging out the card. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.3.1.5 | ColumnzxAxXdsl2VectoringHwPathStatus | accessible-for-notify | current | Vectoring hardward path status. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.4 | TablezxAnXdsl2VectoringCrosstalkTable | not-accessible | current | The vectoring crosstalk table. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.4.1 | RowzxAnXdsl2VectoringCrosstalkEntry | not-accessible | current | The vectoring crosstalk entry. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.4.1.1 | ColumnzxAnXdsl2CrosstalkWeightsDs | read-only | current | It indicates the downstream crosstalk weight list of up to M*N<=384 ports as following structure, each crosstalk weight is present with two octets, and 'FF' is… |
| 1.3.6.1.4.1.3902.1015.1001.1.8.4.1.2 | ColumnzxAnXdsl2CrosstalkWeightsUs | read-only | current | It indicates the upstream crosstalk weight list of up to M*N<=384 ports as following structure, each crosstalk weight is present with two octets, and 'FF' is s… |
| 1.3.6.1.4.1.3902.1015.1001.1.8.5 | TablezxAnXdsl2XlogSampleTable | not-accessible | current | The vectoring crosstalk logarithm sample table. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.5.1 | RowzxAnXdsl2XlogSampleEntry | not-accessible | current | A zxAnXdsl2XlogSampleTable entry. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.5.1.1 | ColumnzxAnXdsl2XlogSampleDirection | not-accessible | current | The direction of vectoring crosstalk logarithm sample. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.5.1.2 | ColumnzxAnXdsl2XlogSampleToneIndex | not-accessible | current | Tone index. |
| 1.3.6.1.4.1.3902.1015.1001.1.8.5.1.3 | ColumnzxAnXdsl2XlogSampleValue | read-only | current | It indicates the crosstalk logarithm sample value list of up to M*N<=384 ports as following structure, each logarithm sample value is present with two octets, … |
| 1.3.6.1.4.1.3902.1015.1001.1.9 | NodezxAnXdsl2Status | |||
| 1.3.6.1.4.1.3902.1015.1001.1.9.2 | TablezxAnXdsl2SCStatusTable | not-accessible | current | VDSL Sub-carrier status table. |
| 1.3.6.1.4.1.3902.1015.1001.1.9.2.1 | RowzxAnXdsl2SCStatusEntry | not-accessible | current | VDSL sub-carrier status entry. |
| 1.3.6.1.4.1.3902.1015.1001.1.9.2.1.1 | ColumnzxAnXdsl2SCStatusRmsGain | read-only | current | The average gi value (RMSGI). |
| 1.3.6.1.4.1.3902.1015.1001.3 | NodezxAnXdsl2TrapObjects | |||
| 1.3.6.1.4.1.3902.1015.1001.3.1 | NotificationzxAnXdsl2LinePerfLOFSThreshXtuc | current | This notification indicates that the LOF seconds threshold has been reached/exceeded for the referred XTU-C. | |
| 1.3.6.1.4.1.3902.1015.1001.3.2 | NotificationzxAnXdsl2LinePerfLOFSThreshXtur | current | This notification indicates that the LOF seconds threshold has been reached/exceeded for the referred XTU-R. | |
| 1.3.6.1.4.1.3902.1015.1001.3.3 | NotificationzxAnXdsl2LinePerfLOLSThreshXtuc | current | This notification indicates that the LOL seconds threshold has been reached/exceeded for the referred XTU-C. | |
| 1.3.6.1.4.1.3902.1015.1001.3.5 | NotificationzxAnXdsl2LinePerfLPRSThreshXtuc | current | This notification indicates that the LPR seconds threshold has been reached/exceeded for the referred XTU-C. | |
| 1.3.6.1.4.1.3902.1015.1001.3.6 | NotificationzxAnXdsl2LinePerfLPRSThreshXtur | current | This notification indicates that the LPR seconds threshold has been reached/exceeded for the referred XTU-R. | |
| 1.3.6.1.4.1.3902.1015.1001.3.7 | NotificationzxAnXdsl2LinePerfPtmCrcErrsThreshXtuc | current | This notification indicates that the Ptm Crc Errors threshold has been reached/exceeded for the referred XTU-C. | |
| 1.3.6.1.4.1.3902.1015.1001.3.8 | NotificationzxAnXdsl2LinePerfPtmCrcErrsThreshXtur | current | This notification indicates that the Ptm Crc Errors threshold has been reached/exceeded for the referred XTU-R. | |
| 1.3.6.1.4.1.3902.1015.1001.3.9 | NotificationzxAnXdsl2LinePerfPtmCodViolsThreshXtuc | current | This notification indicates that the Ptm coding violations threshold has been reached/exceeded for the referred XTU-C. | |
| 1.3.6.1.4.1.3902.1015.1001.3.10 | NotificationzxAnXdsl2LinePerfPtmCodViolsThreshXtur | current | This notification indicates that the Ptm coding violations threshold has been reached/exceeded for the referred XTU-R. | |
| 1.3.6.1.4.1.3902.1015.1001.3.11 | NotificationzxAnXdsl2LineXtucLowDataRateTrap | current | zxAnXdsl2XtucLowDataRateTolerance threshold or zxAnXdsl2XtucLowDataRateThresh reached. | |
| 1.3.6.1.4.1.3902.1015.1001.3.12 | NotificationzxAnXdsl2LineXtucLowDataRateClearTrap | current | zxAnXdsl2LineXtucLowDataRateTrap clear. | |
| 1.3.6.1.4.1.3902.1015.1001.3.13 | NotificationzxAnXdsl2LineXturLowDataRateTrap | current | zxAnXdsl2XturLowDataRateTolerance threshold or zxAnXdsl2XturLowDataRateThresh reached. | |
| 1.3.6.1.4.1.3902.1015.1001.3.14 | NotificationzxAnXdsl2LineXturLowDataRateClearTrap | current | zxAnXdsl2LineXturLowDataRateTrap clear. | |
| 1.3.6.1.4.1.3902.1015.1001.3.15 | NotificationzxAnXdsl2DataPathMismatchTrap | current | This trap will be sent to managemet system when configured data path type is different from actual data path type on the interface. | |
| 1.3.6.1.4.1.3902.1015.1001.3.16 | NotificationzxAnXdsl2DataPathMismatchClrTrap | current | zxAnXdsl2DataPathMismatchTrap will be cleared when configured data path type matches actual data path type on the interface. | |
| 1.3.6.1.4.1.3902.1015.1001.3.17 | NotificationzxAnXdsl2LnVectorUnsupportAlm | current | This trap will be sent when a non-vectoring modem is connecting to a vector port. | |
| 1.3.6.1.4.1.3902.1015.1001.3.18 | NotificationzxAnXdsl2LnVectorUnsupportClr | current | This trap will be sent when the non-vectoring modem no longer connects to the vector port. | |
| 1.3.6.1.4.1.3902.1015.1001.3.19 | NotificationzxAnXdsl2LnCpeUpboPsdErrorNotify | current | This trap will be sent when CPE UPBO PSD errored. | |
| 1.3.6.1.4.1.3902.1015.1001.3.20 | NotificationzxAnXdsl2VectoringConfigCleared | current | This trap will be sent when card vectoring configuration is cleared. | |
| 1.3.6.1.4.1.3902.1015.1001.3.21 | NotificationzxAnXdsl2VectorHwPathAbnormalAlm | current | zxAnXdsl2VectorHwPathAbnormalAlm will be sent when vectoring hardware path is abnormal, such as real time clock abnormal, hardware interface abnormal and so on. | |
| 1.3.6.1.4.1.3902.1015.1001.3.22 | NotificationzxAnXdsl2VectorHwPathAbnormalClr | current | zxAnXdsl2VectorHwPathAbnormalClr will be sent when zxAnXdsl2VectorHwPathAbnormalAlm is cleared. | |
| 1.3.6.1.4.1.3902.1015.1001.3.23 | NotificationzxAnXdsl2XtucEsLossOverThreshAlm | current | This trap will be sent when vector error sample packets loss rate reached threshold in downstream. | |
| 1.3.6.1.4.1.3902.1015.1001.3.24 | NotificationzxAnXdsl2XtucEsLossOverThreshClr | current | This trap will be sent when vector error sample packets loss rate recoveres below the threshold in downstream. | |
| 1.3.6.1.4.1.3902.1015.1001.3.25 | NotificationzxAnXdsl2XturEsLossOverThreshAlm | current | This trap will be sent when vector error sample packets loss rate reached threshold in upstream. | |
| 1.3.6.1.4.1.3902.1015.1001.3.26 | NotificationzxAnXdsl2XturEsLossOverThreshClr | current | This trap will be sent when vector error sample packets loss rate recoveres below the threshold in upstream. | |
| 1.3.6.1.4.1.3902.1015.1001.3.27 | NotificationzxAnXdsl2InpLeftrsThreshXtuc | current | This notification indicates that the 'leftr' defect seconds threshold has been reached/exceeded in a 15-min interval for the referred XTU-C. | |
| 1.3.6.1.4.1.3902.1015.1001.3.28 | NotificationzxAnXdsl2InpLeftrsThreshXtur | current | This notification indicates that the 'leftr' defect seconds threshold has been reached/exceeded in a 15-min interval for the referred XTU-R. | |
| 1.3.6.1.4.1.3902.1015.1001.3.29 | NotificationzxAnXdsl2XtucLosAlm | current | When xdsl2LineStatusXtuc bit 3(lossOfSignal) is 1, zxAnXdsl2XtucLosAlm will be sent to indicate that XTU-C current status is loss of signal. | |
| 1.3.6.1.4.1.3902.1015.1001.3.30 | NotificationzxAnXdsl2XtucLosClr | current | zxAnXdsl2XtucLosClr will be sent when zxAnXdsl2XtucLosAlm is cleared. | |
| 1.3.6.1.4.1.3902.1015.1001.3.31 | NotificationzxAnXdsl2XturLosAlm | current | When xdsl2LineStatusXtur bit 3(lossOfSignal) is 1, zxAnXdsl2XturLosAlm will be sent to indicate that XTU-R current status is loss of signal. | |
| 1.3.6.1.4.1.3902.1015.1001.3.32 | NotificationzxAnXdsl2XturLosClr | current | zxAnXdsl2XturLosClr will be sent when zxAnXdsl2XturLosAlm is cleared. | |
| 1.3.6.1.4.1.3902.1015.1001.3.33 | NotificationzxAnXdsl2XturLprAlm | current | When xdsl2LineStatusXtur bit 4(lossOfSignal) is 1, zxAnXdsl2XturLprAlm will be sent to indicate that XTU-R current status is loss of power. | |
| 1.3.6.1.4.1.3902.1015.1001.3.34 | NotificationzxAnXdsl2XturLprClr | current | zxAnXdsl2XturLprClr will be sent when zxAnXdsl2XturLprAlm is cleared. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ZxAnXdsl2OperationModes | INTEGER { defMode(1), ansit1413(2), etsi(3), g9921PotsNonOverlapped(4), g9921PotsOverlapped(5), g9921IsdnNonOverlapped(6), g9921isdnOverlapped(7), g9921tcmIsdnNonOverlapped(8), g9921tcmIsdnOverlapped(9), g9922potsNonOverlapped(10), g9922potsOverlapped(11), g9922tcmIsdnNonOverlapped(12), g9922tcmIsdnOverlapped(13), g9921tcmIsdnSymmetric(14), g9923PotsNonOverlapped(20), g9923PotsOverlapped(21), g9923IsdnNonOverlapped(22), g9923isdnOverlapped(23), g9924potsNonOverlapped(26), g9924potsOverlapped(27), g9923AnnexIAllDigNonOverlapped(30), g9923AnnexIAllDigOverlapped(31), g9923AnnexJAllDigNonOverlapped(32), g9923AnnexJAllDigOverlapped(33), g9924AnnexIAllDigNonOverlapped(34), g9924AnnexIAllDigOverlapped(35), g9923AnnexLMode1NonOverlapped(36), g9923AnnexLMode2NonOverlapped(37), g9923AnnexLMode3Overlapped(38), g9923AnnexLMode4Overlapped(39), g9923AnnexMPotsNonOverlapped(40), g9923AnnexMPotsOverlapped(41), g9925PotsNonOverlapped(42), g9925PotsOverlapped(43), g9925IsdnNonOverlapped(44), g9925isdnOverlapped(45), g9925AnnexIAllDigNonOverlapped(48), g9925AnnexIAllDigOverlapped(49), g9925AnnexJAllDigNonOverlapped(50), g9925AnnexJAllDigOverlapped(51), g9925AnnexMPotsNonOverlapped(52), g9925AnnexMPotsOverlapped(53), g9932AnnexA(58), g9932AnnexB(59), g9932AnnexC(60), g9932AnnexAProtection(250), g9932AnnexBProtection(251), g9932AnnexCProtection(252), g9935AnnexA(253), g9935AnnexB(254), g9935AnnexC(255) } | current | The VDSL2 management model specified includes an xDSL Mode attribute which identifies an instance of xDSL Mode-Specific PSD Configuration object in the xDSL Line Profile. The following classes of xDSL operating mode are… |