ZXGPON-ONTMGMT-MIB
1759 objects
zxGponRootMib 50 , ONT management and control interface(zxGponOMCI)
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| RFC1155-SMI | enterprises |
| RFC1213-MIB | DisplayString ifIndex |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| ZXGPON-SERVICE-MIB | zxGponOntDevMgmtDescription zxGponOntDevMgmtName zxGponOntDevMgmtTypeName |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902 | NodezxEnterpriseMib | |||
| 1.3.6.1.4.1.3902.1012 | NodezxPON | |||
| 1.3.6.1.4.1.3902.1012.3 | NodezxGponRootMib | |||
| 1.3.6.1.4.1.3902.1012.3.50 | IdentityzxGponOntMgmt | zxGponRootMib 50 , ONT management and control interface(zxGponOMCI) | ||
| 1.3.6.1.4.1.3902.1012.3.50.6 | NodezxGponOmciTrapsInfo | |||
| 1.3.6.1.4.1.3902.1012.3.50.6.1 | TablezxGponOnuOMCITrapInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.6.1.1 | RowzxGponOnuOMCITrapInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.6.1.1.1 | ColumnzxGponOnuOMCITrapSubType | read-only | current | This attribute indicates the sub-type of an OMCI trap: 1: uni-LANLos, 2: ethUniPm-FCSErrs, 3: ethUniPm-ExecessCollisionCnt, 4: ethUniPm-LateCollisionCnt, 5: et… |
| 1.3.6.1.4.1.3902.1012.3.50.6.1.1.2 | ColumnzxGponOnuOMCITrapPosition | read-only | current | This attribute indicates the position of the OMCI trap. According to the sub-type, it may be the UNI index or the GEM port of the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.6.1.1.3 | ColumnzxGponOnuOMCITrapStatus | read-only | current | This attribute indicates the trap status. |
| 1.3.6.1.4.1.3902.1012.3.50.7 | NodezxGponOmciTraps | |||
| 1.3.6.1.4.1.3902.1012.3.50.7.1 | NotificationzxGponOnuOMCITrap | current | ||
| 1.3.6.1.4.1.3902.1012.3.50.8 | NodezxGponOmciStatistics | |||
| 1.3.6.1.4.1.3902.1012.3.50.8.1 | TablezxGponOmciEthStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1 | RowzxGponOmciEthStatsEntry | not-accessible | current | It is entry in the zxGponOmciEthStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.1 | ColumnzxGponOmciEthStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.2 | ColumnzxGponOmciEthStatsThresDataId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.3 | ColumnzxGponOmciEthStatsFCSErrors | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.4 | ColumnzxGponOmciEthStatsExcessiveCollisionCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.5 | ColumnzxGponOmciEthStatsLateCollisionCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.6 | ColumnzxGponOmciEthStatsFrameTooLongs | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.7 | ColumnzxGponOmciEthStatsRxBufOverflows | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.8 | ColumnzxGponOmciEthStatsTxBufOverflows | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.9 | ColumnzxGponOmciEthStatsSingleCollisionCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.10 | ColumnzxGponOmciEthStatsMultipleCollisionCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.11 | ColumnzxGponOmciEthStatsSQECnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.12 | ColumnzxGponOmciEthStatsDeferredTxCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.13 | ColumnzxGponOmciEthStatsInternalMACTxErrCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.14 | ColumnzxGponOmciEthStatsCarrierSenseErrCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.15 | ColumnzxGponOmciEthStatsAlignmentErrCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.16 | ColumnzxGponOmciEthStatsInternalMACRxErrCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.17 | ColumnzxGponOmciEthStatsEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.18 | ColumnzxGponOmciEthStatsPPPoEFilteredCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.19 | ColumnzxGponOmciEthStatsDropEvents | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.20 | ColumnzxGponOmciEthStatsRxOctets | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.21 | ColumnzxGponOmciEthStatsRxPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.22 | ColumnzxGponOmciEthStatsRxBroadcastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.23 | ColumnzxGponOmciEthStatsRxMulticastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.24 | ColumnzxGponOmciEthStatsRxUndersizePkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.25 | ColumnzxGponOmciEthStatsRxFragments | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.26 | ColumnzxGponOmciEthStatsRxJabbers | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.27 | ColumnzxGponOmciEthStatsRx64OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.28 | ColumnzxGponOmciEthStatsRx65To127OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.29 | ColumnzxGponOmciEthStatsRx128To255OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.30 | ColumnzxGponOmciEthStatsRx256To511OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.31 | ColumnzxGponOmciEthStatsRx512To1023OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.1.1.32 | ColumnzxGponOmciEthStatsRx1024To1518OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.2 | TablezxGponOmciGEMStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.2.1 | RowzxGponOmciGEMStatsEntry | not-accessible | current | It is entry in the zxGponOmciGEMStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.2.1.1 | ColumnzxGponOmciGEMStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.2.1.2 | ColumnzxGponOmciGEMStatsThresDataId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.2.1.3 | ColumnzxGponOmciGEMStatsLostPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.2.1.4 | ColumnzxGponOmciGEMStatsMisInsertedPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.2.1.6 | ColumnzxGponOmciGEMStatsRxPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.2.1.7 | ColumnzxGponOmciGEMStatsRxBlocks | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.2.1.8 | ColumnzxGponOmciGEMStatsTxBlocks | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.2.1.9 | ColumnzxGponOmciGEMStatsImpairedBlocks | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.2.1.10 | ColumnzxGponOmciGEMStatsEntryStatus | read-write | current | This attribute specifies the action of this interworking. |
| 1.3.6.1.4.1.3902.1012.3.50.8.3 | TablezxGponOmciGALEthStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.3.1 | RowzxGponOmciGALEthStatsEntry | not-accessible | current | It is entry in the zxGponOmciGALEthStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.3.1.1 | ColumnzxGponOmciGALEthStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.3.1.2 | ColumnzxGponOmciGALEthStatsThresDataId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.3.1.3 | ColumnzxGponOmciGALEthStatsDiscardedFrames | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.3.1.4 | ColumnzxGponOmciGALEthStatsEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.4 | TablezxGponOmciBridgeStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.4.1 | RowzxGponOmciBridgeStatsEntry | not-accessible | current | It is entry in the zxGponOmciBridgeStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.4.1.1 | ColumnzxGponOmciBridgeStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.4.1.2 | ColumnzxGponOmciBridgeStatsThresDataId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.4.1.3 | ColumnzxGponOmciBridgeStatsLearnEntryDiscardFrames | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.4.1.4 | ColumnzxGponOmciBridgeStatsEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.5 | TablezxGponOmciUNIBridgePortStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.5.1 | RowzxGponOmciUNIBridgePortStatsEntry | not-accessible | current | It is entry in the zxGponOmciUNIBridgePortStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.5.1.1 | ColumnzxGponOmciUNIBridgePortStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.5.1.2 | ColumnzxGponOmciUNIBridgePortStatsThresDataId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.5.1.3 | ColumnzxGponOmciUNIBridgePortStatsForwardFrameCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.5.1.4 | ColumnzxGponOmciUNIBridgePortStatsDelayExceedDiscardCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.5.1.5 | ColumnzxGponOmciUNIBridgePortStatsMTUExceedDiscardCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.5.1.6 | ColumnzxGponOmciUNIBridgePortStatsRxFrameCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.5.1.7 | ColumnzxGponOmciUNIBridgePortStatsRxDiscardCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.5.1.8 | ColumnzxGponOmciUNIBridgePortStatsEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.6 | TablezxGponOmciFlowBridgePortStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.6.1 | RowzxGponOmciFlowBridgePortStatsEntry | not-accessible | current | It is entry in the zxGponOmciFlowBridgePortStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.6.1.1 | ColumnzxGponOmciFlowBridgePortStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.6.1.2 | ColumnzxGponOmciFlowBridgePortStatsThresDataId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.6.1.3 | ColumnzxGponOmciFlowBridgePortStatsForwardFrameCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.6.1.4 | ColumnzxGponOmciFlowBridgePortStatsDelayExceedDiscardCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.6.1.5 | ColumnzxGponOmciFlowBridgePortStatsMTUExceedDiscardCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.6.1.6 | ColumnzxGponOmciFlowBridgePortStatsRxFrameCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.6.1.7 | ColumnzxGponOmciFlowBridgePortStatsRxDiscardCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.6.1.8 | ColumnzxGponOmciFlowBridgePortStatsEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.7 | TablezxGponOmciIPHostStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.7.1 | RowzxGponOmciIPHostStatsEntry | not-accessible | current | It is entry in the zxGponOmciIPHostStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.7.1.1 | ColumnzxGponOmciIPHostStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.7.1.2 | ColumnzxGponOmciIPHostStatsThresDataId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.7.1.3 | ColumnzxGponOmciIPHostStatsICMPErrors | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.7.1.4 | ColumnzxGponOmciIPHostStatsDNSErrors | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.7.1.5 | ColumnzxGponOmciIPHostStatsEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.8.7.1.6 | ColumnzxGponOmciIpHostStatsRxPkts | read-only | current | This attribute counts packets received. |
| 1.3.6.1.4.1.3902.1012.3.50.8.7.1.7 | ColumnzxGponOmciIpHostStatsTxPkts | read-only | current | This attribute counts packets transmitted. |
| 1.3.6.1.4.1.3902.1012.3.50.8.7.1.8 | ColumnzxGponOmciIpHostStatsRxOctets | read-only | current | This attribute counts octets received. |
| 1.3.6.1.4.1.3902.1012.3.50.8.7.1.9 | ColumnzxGponOmciIpHostStatsTxOctets | read-only | current | This attribute counts octets transmitted. |
| 1.3.6.1.4.1.3902.1012.3.50.8.8 | TablezxGponOmciCallCtrlStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.8.1 | RowzxGponOmciCallCtrlStatsEntry | not-accessible | current | It is entry in the zxGponOmciCallCtrlStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.8.1.1 | ColumnzxGponOmciCallCtrlStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.8.1.2 | ColumnzxGponOmciCallCtrlStatsThresDataId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.8.1.3 | ColumnzxGponOmciCallCtrlStatsCallSetupFailures | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.8.1.4 | ColumnzxGponOmciCallCtrlStatsCallSetupTimer | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.8.1.5 | ColumnzxGponOmciCallCtrlStatsCallTerminateFailures | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.8.1.6 | ColumnzxGponOmciCallCtrlStatsAnalogPortReleases | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.8.1.7 | ColumnzxGponOmciCallCtrlStatsAnalogPortOffHookTimer | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.8.1.8 | ColumnzxGponOmciCallCtrlStatsEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.8.9 | TablezxGponOmciRTPStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.9.1 | RowzxGponOmciRTPStatsEntry | not-accessible | current | It is entry in the zxGponOmciRTPStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.9.1.1 | ColumnzxGponOmciRTPStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.9.1.2 | ColumnzxGponOmciRTPStatsThresDataId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.9.1.3 | ColumnzxGponOmciRTPStatsRTPErrors | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.9.1.4 | ColumnzxGponOmciRTPStatsPktLoss | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.9.1.5 | ColumnzxGponOmciRTPStatsMaxJitter | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.9.1.6 | ColumnzxGponOmciRTPStatsMaxTimeBtwRTPPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.9.1.7 | ColumnzxGponOmciRTPStatsBufUnderflows | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.9.1.8 | ColumnzxGponOmciRTPStatsBufOverflows | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.9.1.9 | ColumnzxGponOmciRTPStatsEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.8.10 | TablezxGponOmciSIPCallInitStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.10.1 | RowzxGponOmciSIPCallInitStatsEntry | not-accessible | current | It is entry in the zxGponOmciSIPCallInitStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.10.1.1 | ColumnzxGponOmciSIPCallInitStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.10.1.2 | ColumnzxGponOmciSIPCallInitStatsThresDataId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.10.1.3 | ColumnzxGponOmciSIPCallInitStatsConnectFailures | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.10.1.4 | ColumnzxGponOmciSIPCallInitStatsValidateFailures | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.10.1.5 | ColumnzxGponOmciSIPCallInitStatsTimeoutCounter | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.10.1.6 | ColumnzxGponOmciSIPCallInitStatsRxFailures | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.10.1.7 | ColumnzxGponOmciSIPCallInitStatsAuthFailures | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.10.1.8 | ColumnzxGponOmciSIPCallInitStatsEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.8.11 | TablezxGponOmciSIPAgentStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1 | RowzxGponOmciSIPAgentStatsEntry | not-accessible | current | It is entry in the zxGponOmciSIPAgentStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.1 | ColumnzxGponOmciSIPAgentStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.2 | ColumnzxGponOmciSIPAgentStatsThresDataId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.3 | ColumnzxGponOmciSIPAgentStatsTransactions | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.4 | ColumnzxGponOmciSIPAgentStatsRxInviteReqs | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.5 | ColumnzxGponOmciSIPAgentStatsRxInviteRetrans | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.6 | ColumnzxGponOmciSIPAgentStatsRxNonInviteReqs | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.7 | ColumnzxGponOmciSIPAgentStatsRxNonInviteRetrans | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.8 | ColumnzxGponOmciSIPAgentStatsRxResponses | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.9 | ColumnzxGponOmciSIPAgentStatsRxResponseRetrans | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.10 | ColumnzxGponOmciSIPAgentStatsTxInviteReqs | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.11 | ColumnzxGponOmciSIPAgentStatsTxInviteRetrans | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.12 | ColumnzxGponOmciSIPAgentStatsTxNonInviteReqs | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.13 | ColumnzxGponOmciSIPAgentStatsTxNonInviteRetrans | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.14 | ColumnzxGponOmciSIPAgentStatsTxResponses | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.15 | ColumnzxGponOmciSIPAgentStatsTxResponseRetrans | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.11.1.16 | ColumnzxGponOmciSIPAgentStatsEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.8.12 | TablezxGponOmciMGCStatsTable | not-accessible | current | An instance of this managed entity is associated with an instance of the MGC config data or MGC config portal ME. |
| 1.3.6.1.4.1.3902.1012.3.50.8.12.1 | RowzxGponOmciMGCStatsEntry | not-accessible | current | It is entry in the zxGponOmciMGCStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.12.1.1 | ColumnzxGponOmciMGCStatsIntervalEndTime | read-only | current | This attribute identifies the most recently finished 15-minute interval. (R) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.8.12.1.2 | ColumnzxGponOmciMGCStatsThresholdDataId | read-write | current | This attribute points to an instance of the threshold data managed entity that contains PM threshold values. |
| 1.3.6.1.4.1.3902.1012.3.50.8.12.1.3 | ColumnzxGponOmciMGCStatsRecvMsg | read-only | current | This attribute counts the number of received Megaco messages on this association, as defined by H.341. (R) (mandatory) (4 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.8.12.1.4 | ColumnzxGponOmciMGCStatsRecvOctets | read-only | current | This attribute counts the total number of octets received on this association, as defined by H.341. (R) (mandatory) (4 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.8.12.1.5 | ColumnzxGponOmciMGCStatsSendMsg | read-only | current | This attribute counts the total number of Megaco messages sent over this association, as defined by H.341. (R) (mandatory) (4 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.8.12.1.6 | ColumnzxGponOmciMGCStatsSendOctets | read-only | current | This attribute counts the total number of octets sent over this association, as defined by H.341. (R) (mandatory) (4 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.8.12.1.7 | ColumnzxGponOmciMGCStatsProtocolErrors | read-only | current | This attribute counts the total number of errors detected on this association, as defined by H.341. This includes:syntax errors detected in a given received me… |
| 1.3.6.1.4.1.3902.1012.3.50.8.12.1.8 | ColumnzxGponOmciMGCStatsTransLosses | read-only | current | This attribute counts the total number of transport losses (for example, socket problems) detected on this association. A link loss is defined as loss of commu… |
| 1.3.6.1.4.1.3902.1012.3.50.8.12.1.9 | ColumnzxGponOmciMGCStatsLastEvent | read-only | current | This attribute reports the last event detected on this association. This includes events such as the link failing or being set up. |
| 1.3.6.1.4.1.3902.1012.3.50.8.12.1.10 | ColumnzxGponOmciMGCStatsLastEventTime | read-only | current | This attribute reports the time in seconds since the last event on this association was detected, as defined by H.341. (R) (mandatory) (4 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.8.12.1.11 | ColumnzxGponOmciMGCStatsLastResetTime | read-only | current | This attribute reports the time in seconds since these statistics were last reset, as defined by H.341. Under normal circumstances, a get action on this attrib… |
| 1.3.6.1.4.1.3902.1012.3.50.8.12.1.12 | ColumnzxGponOmciMGCStatsEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.8.13 | TablezxGponOmciCESStatsTable | not-accessible | current | Performance monitoring history data of Physical path termination point CES UNI. |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1 | RowzxGponOmciCESStatsEntry | not-accessible | current | It is entry in the zxGponOmciCESStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.1 | ColumnzxGponOmciCESStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.2 | ColumnzxGponOmciCESStatsThresholdDataId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.3 | ColumnzxGponOmciCESStatsDownPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.4 | ColumnzxGponOmciCESStatsUpPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.5 | ColumnzxGponOmciCESStatsDownMissingPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.6 | ColumnzxGponOmciCESStatsDownReorderedPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.7 | ColumnzxGponOmciCESStatsDownMisorderedPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.8 | ColumnzxGponOmciCESStatsDownBufUnderrunOrOverrunPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.9 | ColumnzxGponOmciCESStatsDownMalformedPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.10 | ColumnzxGponOmciCESStatsDownStrayPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.11 | ColumnzxGponOmciCESStatsDownRemotePktLoss | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.12 | ColumnzxGponOmciCESStatsUpTDMLbitPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.13 | ColumnzxGponOmciCESStatsDownErrSeconds | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.14 | ColumnzxGponOmciCESStatsDownSeverelyErrSeconds | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.15 | ColumnzxGponOmciCESStatsDownUnavailableSeconds | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.13.1.25 | ColumnzxGponOmciCESStatsEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.14 | TablezxGponOmciPrivateEthStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1 | RowzxGponOmciPrivateEthStatsEntry | not-accessible | current | It is entry in the zxGponOmciPrivateEthStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.1 | ColumnzxGponOmciPrivateEthStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.2 | ColumnzxGponOmciPrivateEthStatsThresDataId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.3 | ColumnzxGponOmciPrivateEthStatsRxBroadcast | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.4 | ColumnzxGponOmciPrivateEthStatsRxUnicast | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.5 | ColumnzxGponOmciPrivateEthStatsRxMulticast | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.6 | ColumnzxGponOmciPrivateEthStatsRxDiscarded | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.7 | ColumnzxGponOmciPrivateEthStatsTxBroadcast | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.8 | ColumnzxGponOmciPrivateEthStatsTxUnicast | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.9 | ColumnzxGponOmciPrivateEthStatsTxMulticast | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.10 | ColumnzxGponOmciPrivateEthStatsTxDiscarded | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.11 | ColumnzxGponOmciPrvtEthTxPauseFrms | read-only | current | The total number of pause frames sent on the interface. |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.12 | ColumnzxGponOmciPrvtEthRxPauseFrms | read-only | current | The total number of pause frames received on the interface. |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.13 | ColumnzxGponOmciPrvtEthTxErrOctets | read-only | current | The total number of errored octets sent on the interface. |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.14 | ColumnzxGponOmciPrvtEthRxErrOctets | read-only | current | The total number of errored octets received on the interface. |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.20 | ColumnzxGponOmciPrivateEthStatsEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.21 | ColumnzxGponPrvtEthTxFrms | read-only | current | The total number of frames sent on the interface. |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.22 | ColumnzxGponPrvtEthTxUnicastFrms | read-only | current | The total number of unicast frames sent on the interface. |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.23 | ColumnzxGponPrvtEthTxMulticastFrms | read-only | current | The total number of multicast frames sent on the interface. |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.24 | ColumnzxGponPrvtEthTxCollisions | read-only | current | The best estimate of the total number of collisions on this Ethernet segment. |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.25 | ColumnzxGponPrvtEthRxFrms | read-only | current | The total number of frames received on the interface. |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.26 | ColumnzxGponPrvtEthRxFcsErrors | read-only | current | The total number of FCS errors received on the interface. |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.27 | ColumnzxGponPrvtEthRxUnicastFrms | read-only | current | The total number of unicast frames received on the interface. |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.28 | ColumnzxGponPrvtEthRxMulticastFrms | read-only | current | The total number of multicast frames received on the interface. |
| 1.3.6.1.4.1.3902.1012.3.50.8.14.1.29 | ColumnzxGponPrvtEthRxUndersizeFrms | read-only | current | The total number of undersize frames received on the interface. |
| 1.3.6.1.4.1.3902.1012.3.50.8.15 | TablezxGponOmciCfmMepStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.15.1 | RowzxGponOmciCfmMepStatsEntry | not-accessible | current | It is entry in the zxGponOmciCfmMepStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.15.1.1 | ColumnzxGponOmciCfmMepStatsMonitorOption | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.15.1.2 | ColumnzxGponOmciCfmMepStatsIntervalTime | read-write | current | Monitoring interval time in unit of 100ms. |
| 1.3.6.1.4.1.3902.1012.3.50.8.15.1.3 | ColumnzxGponOmciCfmMepStatsMonitorTimes | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.15.1.4 | ColumnzxGponOmciCfmMepStatsEthLMRatio | read-only | current | The percent of loss, in unit of 0.01 percent. |
| 1.3.6.1.4.1.3902.1012.3.50.8.15.1.5 | ColumnzxGponOmciCfmMepStatsEthDMDelayInSec | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.15.1.6 | ColumnzxGponOmciCfmMepStatsEthDMDelayInNanoSec | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.15.1.7 | ColumnzxGponOmciCfmMepStatsEthDMJitterInSec | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.15.1.8 | ColumnzxGponOmciCfmMepStatsEthDMJitterInNanoSec | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.15.1.9 | ColumnzxGponOmciCfmMepStatsInBWUtilization | read-only | current | The percent of utilization of inbound bandwidth, in unit of 0.01 percent. |
| 1.3.6.1.4.1.3902.1012.3.50.8.15.1.10 | ColumnzxGponOmciCfmMepStatsOutBWUtilization | read-only | current | The percent of utilization of outbound bandwidth, in unit of 0.01 percent. |
| 1.3.6.1.4.1.3902.1012.3.50.8.15.1.11 | ColumnzxGponOmciCfmMepStatsEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16 | TablezxGponOmciEthStatsUpTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1 | RowzxGponOmciEthStatsUpEntry | not-accessible | current | It is entry in the zxGponOmciEthStatsUpTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.1 | ColumnzxGponOmciEthStatsUpIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.2 | ColumnzxGponOmciEthStatsUpThresDataId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.3 | ColumnzxGponOmciEthStatsUpDropEvents | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.4 | ColumnzxGponOmciEthStatsUpOctets | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.5 | ColumnzxGponOmciEthStatsUpPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.6 | ColumnzxGponOmciEthStatsUpBroadcastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.7 | ColumnzxGponOmciEthStatsUpMulticastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.8 | ColumnzxGponOmciEthStatsUpCRCErrPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.9 | ColumnzxGponOmciEthStatsUpUndersizePkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.10 | ColumnzxGponOmciEthStatsUpOversizePkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.11 | ColumnzxGponOmciEthStatsUp64OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.12 | ColumnzxGponOmciEthStatsUp65To127OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.13 | ColumnzxGponOmciEthStatsUp128To255OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.14 | ColumnzxGponOmciEthStatsUp256To511OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.15 | ColumnzxGponOmciEthStatsUp512To1023OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.16 | ColumnzxGponOmciEthStatsUp1024To1518OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.16.1.30 | ColumnzxGponOmciEthStatsUpEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17 | TablezxGponOmciEthStatsDownTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1 | RowzxGponOmciEthStatsDownEntry | not-accessible | current | It is entry in the zxGponOmciEthStatsDownTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.1 | ColumnzxGponOmciEthStatsDownIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.2 | ColumnzxGponOmciEthStatsDownThresDataId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.3 | ColumnzxGponOmciEthStatsDownDropEvents | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.4 | ColumnzxGponOmciEthStatsDownOctets | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.5 | ColumnzxGponOmciEthStatsDownPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.6 | ColumnzxGponOmciEthStatsDownBroadcastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.7 | ColumnzxGponOmciEthStatsDownMulticastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.8 | ColumnzxGponOmciEthStatsDownCRCErrPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.9 | ColumnzxGponOmciEthStatsDownUndersizePkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.10 | ColumnzxGponOmciEthStatsDownOversizePkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.11 | ColumnzxGponOmciEthStatsDown64OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.12 | ColumnzxGponOmciEthStatsDown65To127OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.13 | ColumnzxGponOmciEthStatsDown128To255OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.14 | ColumnzxGponOmciEthStatsDown256To511OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.15 | ColumnzxGponOmciEthStatsDown512To1023OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.16 | ColumnzxGponOmciEthStatsDown1024To1518OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.17.1.30 | ColumnzxGponOmciEthStatsDownEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.18 | TablezxGponOmciFecCurrStatsTable | not-accessible | current | FEC performance monitoring current data |
| 1.3.6.1.4.1.3902.1012.3.50.8.18.1 | RowzxGponOmciFecCurrStatsEntry | not-accessible | current | It is entry in the zxGponOmciFecCurrStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.18.1.1 | ColumnzxGponOmciFecCurrIntvlEndTime | read-only | current | This attribute identifies the most recently finished 15-minute interval. |
| 1.3.6.1.4.1.3902.1012.3.50.8.18.1.2 | ColumnzxGponOmciFecCurrThresDataId | read-create | current | This attribute points to an instance of the threshold data 1 managed entity that contains PM threshold values. Since no threshold value attribute number exceed… |
| 1.3.6.1.4.1.3902.1012.3.50.8.18.1.3 | ColumnzxGponOmciFecCurrCrctBytes | read-only | current | This attribute counts the number of bytes that were corrected by the FEC function. |
| 1.3.6.1.4.1.3902.1012.3.50.8.18.1.4 | ColumnzxGponOmciFecCurrCrctCodeWords | read-only | current | This attribute counts the code words that were corrected by the FEC function. |
| 1.3.6.1.4.1.3902.1012.3.50.8.18.1.5 | ColumnzxGponOmciFecCurrUcrctCodeWords | read-only | current | This attribute counts the code words that were not corrected by the FEC function. |
| 1.3.6.1.4.1.3902.1012.3.50.8.18.1.6 | ColumnzxGponOmciFecCurrTotalCodeWords | read-only | current | This attribute counts the total received code words. |
| 1.3.6.1.4.1.3902.1012.3.50.8.18.1.7 | ColumnzxGponOmciFecCurrFecSeconds | read-only | current | This attribute counts seconds during which there was a forward error correction anomaly. |
| 1.3.6.1.4.1.3902.1012.3.50.8.18.1.30 | ColumnzxGponOmciFecCurrEntryStatus | read-create | current | The row status of this entry.The zxGponOmciFecCurrThresDataId need to be configured when add a row to the entry. When add or delete rows in zxGponOmciFecCurrSt… |
| 1.3.6.1.4.1.3902.1012.3.50.8.19 | TablezxGponOmciMcastVlanStatsTable | not-accessible | current | GPON ONT multicast performance monitoring current data. |
| 1.3.6.1.4.1.3902.1012.3.50.8.19.1 | RowzxGponOmciMcastVlanStatsEntry | not-accessible | current | It is entry in the zxGponOmciMcastVlanStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.19.1.1 | ColumnzxGponMcastIntervalEndTime | read-only | current | This attribute identifies the most recently finished 15-minute interval. |
| 1.3.6.1.4.1.3902.1012.3.50.8.19.1.2 | ColumnzxGponMcastThresDataId | read-only | current | This attribute points to an instance of the threshold data 1 managed entity that contains PM threshold values. Since no threshold value attribute number exceed… |
| 1.3.6.1.4.1.3902.1012.3.50.8.19.1.3 | ColumnzxGponMcastTxJoins | read-only | current | This attribute counts the total number of transmit joins message. |
| 1.3.6.1.4.1.3902.1012.3.50.8.19.1.4 | ColumnzxGponMcastRxJoins | read-only | current | This attribute counts the total number of received joins message. |
| 1.3.6.1.4.1.3902.1012.3.50.8.19.1.5 | ColumnzxGponMcastSuccJoins | read-only | current | This attribute counts the total number of successful joins message. |
| 1.3.6.1.4.1.3902.1012.3.50.8.19.1.6 | ColumnzxGponMcastUnsuccJoins | read-only | current | This attribute counts the total number of unsuccessful joins message. |
| 1.3.6.1.4.1.3902.1012.3.50.8.19.1.7 | ColumnzxGponMcastTxLeave | read-only | current | This attribute counts the total number of transmitted leave message. |
| 1.3.6.1.4.1.3902.1012.3.50.8.19.1.8 | ColumnzxGponMcastRxLeave | read-only | current | This attribute counts the total number of received leave message. |
| 1.3.6.1.4.1.3902.1012.3.50.8.19.1.9 | ColumnzxGponMcastTxGenQuery | read-only | current | This attribute counts the total number of tranmsmitted general query message. |
| 1.3.6.1.4.1.3902.1012.3.50.8.19.1.10 | ColumnzxGponMcastRxGenQuery | read-only | current | This attribute counts the total number of received general query message. |
| 1.3.6.1.4.1.3902.1012.3.50.8.19.1.11 | ColumnzxGponMcastTxGroupSpeQuery | read-only | current | This attribute counts the total number of tranmsmitted special query message. |
| 1.3.6.1.4.1.3902.1012.3.50.8.19.1.12 | ColumnzxGponMcastRxGroupSpeQuery | read-only | current | This attribute counts the total number of received special query message. |
| 1.3.6.1.4.1.3902.1012.3.50.8.19.1.13 | ColumnzxGponMcastRxInvalidIgmp | read-only | current | This attribute counts the total number of received invalid IGMP message. |
| 1.3.6.1.4.1.3902.1012.3.50.8.19.1.30 | ColumnzxGponMcastMonitoringStatus | read-create | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.8.20 | TablezxGponOmciVlanEthStatsTable | not-accessible | current | GPON ONT Ethernet UNI VLAN Monitoring Table. |
| 1.3.6.1.4.1.3902.1012.3.50.8.20.1 | RowzxGponOmciVlanEthStatsEntry | not-accessible | current | It is entry in the zxGponVlanEthMonitoringTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.20.1.1 | ColumnzxGponVlanId | not-accessible | current | A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-… |
| 1.3.6.1.4.1.3902.1012.3.50.8.20.1.2 | ColumnzxGponVlanEthIntervalEndTime | read-only | current | This attribute identifies the most recently finished 15-minute interval. |
| 1.3.6.1.4.1.3902.1012.3.50.8.20.1.3 | ColumnzxGponVlanEthThresDataId | read-only | current | This attribute points to an instance of the threshold data 1 managed entity that contains PM threshold values. Since no threshold value attribute number exceed… |
| 1.3.6.1.4.1.3902.1012.3.50.8.20.1.4 | ColumnzxGponVlanEthRxFrms | read-only | current | This attribute counts the total received frames. |
| 1.3.6.1.4.1.3902.1012.3.50.8.20.1.5 | ColumnzxGponVlanEthRxOctets | read-only | current | This attribute counts the total received octets. |
| 1.3.6.1.4.1.3902.1012.3.50.8.20.1.6 | ColumnzxGponVlanEthDcdInboundFrms | read-only | current | This attribute counts the total discard inbound frames. |
| 1.3.6.1.4.1.3902.1012.3.50.8.20.1.7 | ColumnzxGponVlanEthFwdOutboundFrms | read-only | current | This attribute counts the total forward outbound frames. |
| 1.3.6.1.4.1.3902.1012.3.50.8.20.1.8 | ColumnzxGponVlanEthDcdLackBuffersFrms | read-only | current | This attribute counts the total discard frames because of lacking buffers. |
| 1.3.6.1.4.1.3902.1012.3.50.8.20.1.9 | ColumnzxGponVlanEthDcdTransDelayFrms | read-only | current | This attribute counts the total discard frames because of transmission delay. |
| 1.3.6.1.4.1.3902.1012.3.50.8.20.1.10 | ColumnzxGponVlanEthDcdOnErrorFrms | read-only | current | This attribute counts the total discard frames on errors. |
| 1.3.6.1.4.1.3902.1012.3.50.8.20.1.11 | ColumnzxGponVlanEthDcdByFilteringFrms | read-only | current | This attribute counts the total discard frames on ingress filtering. |
| 1.3.6.1.4.1.3902.1012.3.50.8.20.1.30 | ColumnzxGponOmciVlanEthStatsStatus | read-create | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.8.21 | TablezxGponOmciEthHisStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1 | RowzxGponOmciEthHisStatsEntry | not-accessible | current | It is entry in the zxGponOmciEthHisStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.1 | ColumnzxGponOmciEthHisStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.2 | ColumnzxGponOmciEthHisStatsThresDataId | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.3 | ColumnzxGponOmciEthHisStatsFCSErrors | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.4 | ColumnzxGponOmciEthHisStatsExcessiveCollisionCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.5 | ColumnzxGponOmciEthHisStatsLateCollisionCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.6 | ColumnzxGponOmciEthHisStatsFrameTooLongs | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.7 | ColumnzxGponOmciEthHisStatsRxBufOverflows | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.8 | ColumnzxGponOmciEthHisStatsTxBufOverflows | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.9 | ColumnzxGponOmciEthHisStatsSingleCollisionCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.10 | ColumnzxGponOmciEthHisStatsMultipleCollisionCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.11 | ColumnzxGponOmciEthHisStatsSQECnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.12 | ColumnzxGponOmciEthHisStatsDeferredTxCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.13 | ColumnzxGponOmciEthHisStatsInternalMACTxErrCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.14 | ColumnzxGponOmciEthHisStatsCarrierSenseErrCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.15 | ColumnzxGponOmciEthHisStatsAlignmentErrCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.16 | ColumnzxGponOmciEthHisStatsInternalMACRxErrCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.17 | ColumnzxGponOmciEthHisStatsEntryStatus | read-only | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.18 | ColumnzxGponOmciEthHisStatsPPPoEFilteredCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.19 | ColumnzxGponOmciEthHisStatsDropEvents | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.20 | ColumnzxGponOmciEthHisStatsRxOctets | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.21 | ColumnzxGponOmciEthHisStatsRxPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.22 | ColumnzxGponOmciEthHisStatsRxBroadcastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.23 | ColumnzxGponOmciEthHisStatsRxMulticastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.24 | ColumnzxGponOmciEthHisStatsRxUndersizePkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.25 | ColumnzxGponOmciEthHisStatsRxFragments | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.26 | ColumnzxGponOmciEthHisStatsRxJabbers | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.27 | ColumnzxGponOmciEthHisStatsRx64OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.28 | ColumnzxGponOmciEthHisStatsRx65To127OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.29 | ColumnzxGponOmciEthHisStatsRx128To255OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.30 | ColumnzxGponOmciEthHisStatsRx256To511OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.31 | ColumnzxGponOmciEthHisStatsRx512To1023OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.21.1.32 | ColumnzxGponOmciEthHisStatsRx1024To1518OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.22 | TablezxGponOmciGEMHisStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.22.1 | RowzxGponOmciGEMHisStatsEntry | not-accessible | current | It is entry in the zxGponOmciGEMHisStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.22.1.1 | ColumnzxGponOmciGEMHisStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.22.1.2 | ColumnzxGponOmciGEMHisStatsThresDataId | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.22.1.3 | ColumnzxGponOmciGEMHisStatsLostPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.22.1.4 | ColumnzxGponOmciGEMHisStatsMisInsertedPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.22.1.6 | ColumnzxGponOmciGEMHisStatsRxPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.22.1.7 | ColumnzxGponOmciGEMHisStatsRxBlocks | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.22.1.8 | ColumnzxGponOmciGEMHisStatsTxBlocks | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.22.1.9 | ColumnzxGponOmciGEMHisStatsImpairedBlocks | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.22.1.10 | ColumnzxGponOmciGEMHisStatsEntryStatus | read-only | current | This attribute specifies the action of this interworking. |
| 1.3.6.1.4.1.3902.1012.3.50.8.23 | TablezxGponOmciUNIBridgePortHisStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.23.1 | RowzxGponOmciUNIBridgePortHisStatsEntry | not-accessible | current | It is entry in the zxGponOmciUNIBridgePortHisStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.23.1.1 | ColumnzxGponOmciUNIBridgePortHisStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.23.1.2 | ColumnzxGponOmciUNIBridgePortHisStatsThresDataId | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.23.1.3 | ColumnzxGponOmciUNIBridgePortHisStatsForwardFrameCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.23.1.4 | ColumnzxGponOmciUNIBridgePortHisStatsDelayExceedDiscardCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.23.1.5 | ColumnzxGponOmciUNIBridgePortHisStatsMTUExceedDiscardCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.23.1.6 | ColumnzxGponOmciUNIBridgePortHisStatsRxFrameCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.23.1.7 | ColumnzxGponOmciUNIBridgePortHisStatsRxDiscardCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.23.1.8 | ColumnzxGponOmciUNIBridgePortHisStatsEntryStatus | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.24 | TablezxGponOmciFlowBridgePortHisStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.24.1 | RowzxGponOmciFlowBridgePortHisStatsEntry | not-accessible | current | It is entry in the zxGponOmciFlowBridgePortHisStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.24.1.1 | ColumnzxGponOmciFlowBridgePortHisStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.24.1.2 | ColumnzxGponOmciFlowBridgePortHisStatsThresDataId | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.24.1.3 | ColumnzxGponOmciFlowBridgePortHisStatsForwardFrameCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.24.1.4 | ColumnzxGponOmciFlowBridgePortHisStatsDelayExceedDiscardCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.24.1.5 | ColumnzxGponOmciFlowBridgePortHisStatsMTUExceedDiscardCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.24.1.6 | ColumnzxGponOmciFlowBridgePortHisStatsRxFrameCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.24.1.7 | ColumnzxGponOmciFlowBridgePortHisStatsRxDiscardCnt | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.24.1.8 | ColumnzxGponOmciFlowBridgePortHisStatsEntryStatus | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26 | TablezxGponOmciEthHisStatsUpTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1 | RowzxGponOmciEthHisStatsUpEntry | not-accessible | current | It is entry in the zxGponOmciEthHisStatsUpTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.1 | ColumnzxGponOmciEthHisStatsUpIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.2 | ColumnzxGponOmciEthHisStatsUpThresDataId | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.3 | ColumnzxGponOmciEthHisStatsUpDropEvents | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.4 | ColumnzxGponOmciEthHisStatsUpOctets | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.5 | ColumnzxGponOmciEthHisStatsUpPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.6 | ColumnzxGponOmciEthHisStatsUpBroadcastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.7 | ColumnzxGponOmciEthHisStatsUpMulticastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.8 | ColumnzxGponOmciEthHisStatsUpCRCErrPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.9 | ColumnzxGponOmciEthHisStatsUpUndersizePkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.10 | ColumnzxGponOmciEthHisStatsUpOversizePkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.11 | ColumnzxGponOmciEthHisStatsUp64OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.12 | ColumnzxGponOmciEthHisStatsUp65To127OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.13 | ColumnzxGponOmciEthHisStatsUp128To255OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.14 | ColumnzxGponOmciEthHisStatsUp256To511OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.15 | ColumnzxGponOmciEthHisStatsUp512To1023OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.16 | ColumnzxGponOmciEthHisStatsUp1024To1518OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.26.1.30 | ColumnzxGponOmciEthHisStatsUpEntryStatus | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27 | TablezxGponOmciEthHisStatsDownTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1 | RowzxGponOmciEthHisStatsDownEntry | not-accessible | current | It is entry in the zxGponOmciEthHisStatsDownTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.1 | ColumnzxGponOmciEthHisStatsDownIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.2 | ColumnzxGponOmciEthHisStatsDownThresDataId | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.3 | ColumnzxGponOmciEthHisStatsDownDropEvents | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.4 | ColumnzxGponOmciEthHisStatsDownOctets | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.5 | ColumnzxGponOmciEthHisStatsDownPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.6 | ColumnzxGponOmciEthHisStatsDownBroadcastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.7 | ColumnzxGponOmciEthHisStatsDownMulticastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.8 | ColumnzxGponOmciEthHisStatsDownCRCErrPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.9 | ColumnzxGponOmciEthHisStatsDownUndersizePkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.10 | ColumnzxGponOmciEthHisStatsDownOversizePkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.11 | ColumnzxGponOmciEthHisStatsDown64OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.12 | ColumnzxGponOmciEthHisStatsDown65To127OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.13 | ColumnzxGponOmciEthHisStatsDown128To255OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.14 | ColumnzxGponOmciEthHisStatsDown256To511OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.15 | ColumnzxGponOmciEthHisStatsDown512To1023OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.16 | ColumnzxGponOmciEthHisStatsDown1024To1518OctetsPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.27.1.30 | ColumnzxGponOmciEthHisStatsDownEntryStatus | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.28 | TablezxGponOmciFecHisStatsTable | not-accessible | current | FEC performance monitoring history data. |
| 1.3.6.1.4.1.3902.1012.3.50.8.28.1 | RowzxGponOmciFecHisStatsEntry | not-accessible | current | It is entry in the zxGponOmciFecHisStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.28.1.1 | ColumnzxGponOmciFecHisIntvlEndTime | read-only | current | This attribute identifies the most recently finished 15-minute interval. |
| 1.3.6.1.4.1.3902.1012.3.50.8.28.1.2 | ColumnzxGponOmciFecHisThresDataId | read-only | current | This attribute points to an instance of the threshold data 1 managed entity that contains PM threshold values. Since no threshold value attribute number exceed… |
| 1.3.6.1.4.1.3902.1012.3.50.8.28.1.3 | ColumnzxGponOmciFecHisCrctBytes | read-only | current | This attribute counts the number of bytes that were corrected by the FEC function. |
| 1.3.6.1.4.1.3902.1012.3.50.8.28.1.4 | ColumnzxGponOmciFecHisCrctCodeWords | read-only | current | This attribute counts the code words that were corrected by the FEC function. |
| 1.3.6.1.4.1.3902.1012.3.50.8.28.1.5 | ColumnzxGponOmciFecHisUcrctCodeWords | read-only | current | This attribute counts the code words that were not corrected by the FEC function. |
| 1.3.6.1.4.1.3902.1012.3.50.8.28.1.6 | ColumnzxGponOmciFecHisTotalCodeWords | read-only | current | This attribute counts the total received code words. |
| 1.3.6.1.4.1.3902.1012.3.50.8.28.1.7 | ColumnzxGponOmciFecHisFecSeconds | read-only | current | This attribute counts seconds during which there was a forward error correction anomaly. |
| 1.3.6.1.4.1.3902.1012.3.50.8.31 | TablezxGponOmciCESHisStatsTable | not-accessible | current | Performance monitoring history data of Physical path termination point CES UNI. |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1 | RowzxGponOmciCESHisStatsEntry | not-accessible | current | It is entry in the zxGponOmciCESStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.1 | ColumnzxGponOmciCESHisStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.2 | ColumnzxGponOmciCESHisStatsThresholdDataId | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.3 | ColumnzxGponOmciCESHisStatsDownPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.4 | ColumnzxGponOmciCESHisStatsUpPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.5 | ColumnzxGponOmciCESHisStatsDownMissingPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.6 | ColumnzxGponOmciCESHisStatsDownReorderedPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.7 | ColumnzxGponOmciCESHisStatsDownMisorderedPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.8 | ColumnzxGponOmciCESHisStatsDownBufUnderrunOrOverrunPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.9 | ColumnzxGponOmciCESHisStatsDownMalformedPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.10 | ColumnzxGponOmciCESHisStatsDownStrayPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.11 | ColumnzxGponOmciCESHisStatsDownRemotePktLoss | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.12 | ColumnzxGponOmciCESHisStatsUpTDMLbitPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.13 | ColumnzxGponOmciCESHisStatsDownErrSeconds | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.14 | ColumnzxGponOmciCESHisStatsDownSeverelyErrSeconds | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.15 | ColumnzxGponOmciCESHisStatsDownUnavailableSeconds | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.31.1.25 | ColumnzxGponOmciCESHisStatsEntryStatus | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41 | TablezxGponOmciPrivateEthHisStatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1 | RowzxGponOmciPrivateEthHisStatsEntry | not-accessible | current | It is entry in the zxGponOmciPrivateEthHisStatsTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1.1 | ColumnzxGponOmciPrivateEthHisStatsIntervalEndTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1.2 | ColumnzxGponOmciPrivateEthHisStatsThresDataId | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1.3 | ColumnzxGponOmciPrivateEthHisStatsRxBroadcast | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1.4 | ColumnzxGponOmciPrivateEthHisStatsRxUnicast | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1.5 | ColumnzxGponOmciPrivateEthHisStatsRxMulticast | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1.6 | ColumnzxGponOmciPrivateEthHisStatsRxDiscarded | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1.7 | ColumnzxGponOmciPrivateEthHisStatsTxBroadcast | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1.8 | ColumnzxGponOmciPrivateEthHisStatsTxUnicast | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1.9 | ColumnzxGponOmciPrivateEthHisStatsTxMulticast | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1.10 | ColumnzxGponOmciPrivateEthHisStatsTxDiscarded | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1.11 | ColumnzxGponOmciPrivateEthHisStatsTxPauseFrames | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1.12 | ColumnzxGponOmciPrivateEthHisStatsRxPauseFrames | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1.13 | ColumnzxGponOmciPrivateEthHisStatsTxErroredOctets | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1.14 | ColumnzxGponOmciPrivateEthHisStatsRxErroredOctets | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.41.1.20 | ColumnzxGponOmciPrivateEthHisStatsEntryStatus | read-only | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.8.51 | TablezxGponOmciStatsThresholdTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1 | RowzxGponOmciStatsThresholdEntry | not-accessible | current | It is entry in the zxGponOmciStatsThresholdEntry. |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.1 | ColumnzxGponOmciStatsThresholdType | not-accessible | current | This attribute indicates the type of OMCI statistics threshold data. 1 eth 2 ces 3 gem port 4 bridge port For eth, there are 19 threshold data as follows: fcs-… |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.2 | ColumnzxGponOmciStatsThresholdId | not-accessible | current | This attribute provides a unique number for each instance of this managed entity. (R, Set-by-create) (mandatory) (4 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.3 | ColumnzxGponOmciStatsThresholdName | read-write | current | This attribute provides a unique name for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.4 | ColumnzxGponOmciStatsThresValue1 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.5 | ColumnzxGponOmciStatsThresValue2 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.6 | ColumnzxGponOmciStatsThresValue3 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.7 | ColumnzxGponOmciStatsThresValue4 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.8 | ColumnzxGponOmciStatsThresValue5 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.9 | ColumnzxGponOmciStatsThresValue6 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.10 | ColumnzxGponOmciStatsThresValue7 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.11 | ColumnzxGponOmciStatsThresValue8 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.12 | ColumnzxGponOmciStatsThresValue9 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.13 | ColumnzxGponOmciStatsThresValue10 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.14 | ColumnzxGponOmciStatsThresValue11 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.15 | ColumnzxGponOmciStatsThresValue12 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.16 | ColumnzxGponOmciStatsThresValue13 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.17 | ColumnzxGponOmciStatsThresValue14 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.18 | ColumnzxGponOmciStatsThresValue15 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.19 | ColumnzxGponOmciStatsThresValue16 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.20 | ColumnzxGponOmciStatsThresValue17 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.21 | ColumnzxGponOmciStatsThresValue18 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.22 | ColumnzxGponOmciStatsThresValue19 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.23 | ColumnzxGponOmciStatsThresValue20 | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.24 | ColumnzxGponOmciStatsThresRefCnt | read-only | current | Forbidden to delete table entry if not equal zero. |
| 1.3.6.1.4.1.3902.1012.3.50.8.51.1.30 | ColumnzxGponOmciStatsThresEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.8.104 | TablezxGponRmUniVoipSrvC15MPerfTable | not-accessible | current | The current 15 minutes performance data table related to the VoIP service of POTS UNI. |
| 1.3.6.1.4.1.3902.1012.3.50.8.104.1 | RowzxGponRmUniVoipSrvC15MPerfEntry | not-accessible | current | It is entry in the zxGponRmUniVoipSrvC15MPerfTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.104.1.1 | ColumnzxGponUniVoipPerfThreshPrfId | read-create | current | This attribute is the ID of profile used by threshold configuration. According to 'zxGponOmciStatsThresholdId' in 'zxGponOmciStatsThresholdTable'. This attribu… |
| 1.3.6.1.4.1.3902.1012.3.50.8.104.1.2 | ColumnzxGponUniVoipC15MTxRtpPkts | read-only | current | This attribute identifies the total number of transmitted RTP packets. |
| 1.3.6.1.4.1.3902.1012.3.50.8.104.1.3 | ColumnzxGponUniVoipC15MRxRtpPkts | read-only | current | This attribute identifies the total number of received RTP packets. |
| 1.3.6.1.4.1.3902.1012.3.50.8.104.1.4 | ColumnzxGponUniVoipC15MAverageDelay | read-only | current | This attribute identifies average delay in milliseconds. |
| 1.3.6.1.4.1.3902.1012.3.50.8.104.1.5 | ColumnzxGponUniVoipC15MAverageJitter | read-only | current | This attribute identifies average jitter in milliseconds. |
| 1.3.6.1.4.1.3902.1012.3.50.8.104.1.6 | ColumnzxGponUniVoipC15MPktLossRatio | read-only | current | This attribute identifies the percent of packets loss. |
| 1.3.6.1.4.1.3902.1012.3.50.8.104.1.7 | ColumnzxGponUniVoipC15MTxMediaDataRate | read-only | current | This attribute identifies transmitted rate of media data. |
| 1.3.6.1.4.1.3902.1012.3.50.8.104.1.8 | ColumnzxGponUniVoipC15MRxMediaDataRate | read-only | current | This attribute identifies received rate of media data. |
| 1.3.6.1.4.1.3902.1012.3.50.8.104.1.9 | ColumnzxGponUniVoipC15MCurCallDuration | read-only | current | This attribute identifies the duration of current call in seconds. |
| 1.3.6.1.4.1.3902.1012.3.50.8.104.1.10 | ColumnzxGponUniVoipC15MTotCallDuration | read-only | current | This attribute identifies the duration of total calls in seconds. |
| 1.3.6.1.4.1.3902.1012.3.50.8.104.1.11 | ColumnzxGponUniVoipC15MCallTimes | read-only | current | This attribute identifies the total number of call times. |
| 1.3.6.1.4.1.3902.1012.3.50.8.104.1.50 | ColumnzxGponUniVoipPerfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1012.3.50.8.105 | TablezxGponRmUniVoipSrvH15MPerfTable | not-accessible | current | The 15 minutes interval performance data table related to the VoIP service of POTS UNI. |
| 1.3.6.1.4.1.3902.1012.3.50.8.105.1 | RowzxGponRmUniVoipSrvH15MPerfEntry | not-accessible | current | It is entry in the zxGponRmUniVoipSrvH15MPerfTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.105.1.1 | ColumnzxGponUniVoipH15MIntvEndTime | read-only | current | This attribute identifies the most recently finished 15-minute interval. |
| 1.3.6.1.4.1.3902.1012.3.50.8.105.1.2 | ColumnzxGponUniVoipH15MTxRtpPkts | read-only | current | This attribute identifies the total number of transmitted RTP packets. |
| 1.3.6.1.4.1.3902.1012.3.50.8.105.1.3 | ColumnzxGponUniVoipH15MRxRtpPkts | read-only | current | This attribute identifies the total number of received RTP packets. |
| 1.3.6.1.4.1.3902.1012.3.50.8.105.1.4 | ColumnzxGponUniVoipH15MAverageDelay | read-only | current | This attribute identifies average delay in milliseconds. |
| 1.3.6.1.4.1.3902.1012.3.50.8.105.1.5 | ColumnzxGponUniVoipH15MAverageJitter | read-only | current | This attribute identifies average jitter in milliseconds. |
| 1.3.6.1.4.1.3902.1012.3.50.8.105.1.6 | ColumnzxGponUniVoipH15MPktLossRatio | read-only | current | This attribute identifies the percent of packets loss. |
| 1.3.6.1.4.1.3902.1012.3.50.8.105.1.7 | ColumnzxGponUniVoipH15MTxMediaDataRate | read-only | current | This attribute identifies transmitted rate of media data. |
| 1.3.6.1.4.1.3902.1012.3.50.8.105.1.8 | ColumnzxGponUniVoipH15MRxMediaDataRate | read-only | current | This attribute identifies received rate of media data. |
| 1.3.6.1.4.1.3902.1012.3.50.8.105.1.9 | ColumnzxGponUniVoipH15MCurCallDuration | read-only | current | This attribute identifies the duration of current call in seconds. |
| 1.3.6.1.4.1.3902.1012.3.50.8.105.1.10 | ColumnzxGponUniVoipH15MTotCallDuration | read-only | current | This attribute identifies the duration of total calls in seconds. |
| 1.3.6.1.4.1.3902.1012.3.50.8.105.1.11 | ColumnzxGponUniVoipH15MCallTimes | read-only | current | This attribute identifies the total number of call times. |
| 1.3.6.1.4.1.3902.1012.3.50.8.106 | TablezxGponRmOnuVoipSrvC15MPerfTable | not-accessible | current | The current 15 minutes performance data table related to the VoIP service of ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.8.106.1 | RowzxGponRmOnuVoipSrvC15MPerfEntry | not-accessible | current | It is entry in the zxGponRmOnuVoipSrvC15MPerfTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.106.1.1 | ColumnzxGponOnuVoipPerfThreshPrfId | read-create | current | This attribute is the ID of profile used by threshold configuration. According to 'zxGponOmciStatsThresholdId' in 'zxGponOmciStatsThresholdTable'. This attribu… |
| 1.3.6.1.4.1.3902.1012.3.50.8.106.1.2 | ColumnzxGponOnuVoipC15MTxSignalMsg | read-only | current | This attribute identifies the total number of transmitted signalling messages. |
| 1.3.6.1.4.1.3902.1012.3.50.8.106.1.3 | ColumnzxGponOnuVoipC15MRxSignalMsg | read-only | current | This attribute identifies the total number of received signalling messages. |
| 1.3.6.1.4.1.3902.1012.3.50.8.106.1.4 | ColumnzxGponOnuVoipC15MReTxSignalMsg | read-only | current | This attribute identifies the number of retransmitted signalling messages. |
| 1.3.6.1.4.1.3902.1012.3.50.8.106.1.5 | ColumnzxGponOnuVoipC15MLossSignalMsg | read-only | current | This attribute identifies the total number of lost signalling messages. |
| 1.3.6.1.4.1.3902.1012.3.50.8.106.1.6 | ColumnzxGponOnuVoipC15MErrSignalMsg | read-only | current | This attribute identifies the total number of errored signalling messages. |
| 1.3.6.1.4.1.3902.1012.3.50.8.106.1.7 | ColumnzxGponOnuVoipC15MUnknowSignalMsg | read-only | current | This attribute identifies the total number of unknown signalling messages. |
| 1.3.6.1.4.1.3902.1012.3.50.8.106.1.50 | ColumnzxGponOnuVoipPerfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1012.3.50.8.107 | TablezxGponRmOnuVoipSrvH15MPerfTable | not-accessible | current | Performance monitoring data related to the VoIP service of ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.8.107.1 | RowzxGponRmOnuVoipSrvH15MPerfEntry | not-accessible | current | It is entry in the zxGponRmOnuVoipSrvH15MPerfTable. |
| 1.3.6.1.4.1.3902.1012.3.50.8.107.1.1 | ColumnzxGponOnuVoipH15MIntvEndTime | read-only | current | This attribute identifies the most recently finished 15-minute interval. |
| 1.3.6.1.4.1.3902.1012.3.50.8.107.1.2 | ColumnzxGponOnuVoipH15MTxSignalMsg | read-only | current | This attribute identifies the total number of transmitted signalling messages. |
| 1.3.6.1.4.1.3902.1012.3.50.8.107.1.3 | ColumnzxGponOnuVoipH15MRxSignalMsg | read-only | current | This attribute identifies the total number of received signalling messages. |
| 1.3.6.1.4.1.3902.1012.3.50.8.107.1.4 | ColumnzxGponOnuVoipH15MReTxSignalMsg | read-only | current | This attribute identifies the number of retransmitted signalling messages. |
| 1.3.6.1.4.1.3902.1012.3.50.8.107.1.5 | ColumnzxGponOnuVoipH15MLossSignalMsg | read-only | current | This attribute identifies the total number of lost signalling messages. |
| 1.3.6.1.4.1.3902.1012.3.50.8.107.1.6 | ColumnzxGponOnuVoipH15MErrSignalMsg | read-only | current | This attribute identifies the total number of errored signalling messages. |
| 1.3.6.1.4.1.3902.1012.3.50.8.107.1.7 | ColumnzxGponOnuVoipH15MUnknowSignalMsg | read-only | current | This attribute identifies the total number of unknown signalling messages. |
| 1.3.6.1.4.1.3902.1012.3.50.11 | NodezxGponRmONTEquipMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.11.1 | TablezxGponOntIndexTable | not-accessible | current | Define the index of ONT. |
| 1.3.6.1.4.1.3902.1012.3.50.11.1.1 | RowzxGponOntIndexEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.11.1.1.1 | ColumnzxGponOltIndex | not-accessible | current | The 4 bytes index includes: interface type(bit31~28);shelfId(bit27~24);slotId(bit23~16);oltId(bit16~8);reserved(bit7~bit0) |
| 1.3.6.1.4.1.3902.1012.3.50.11.1.1.2 | ColumnzxGponONTIndex | not-accessible | current | This attribute indicates the index of ONT, from 1 to M. |
| 1.3.6.1.4.1.3902.1012.3.50.11.1.1.3 | ColumnzxGponUNIIndex | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.50.11.1.1.4 | ColumnzxGponFlowIndex | read-only | current | This attribute indicates the index of flow in ONT, from 1 to M.(1 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.11.1.1.5 | ColumnzxGponPonIndex | read-only | current | This attribute indicates the index of ANI in ONT, from 1 to M. The first byte specifies the slot Id associated with this PON; the second byte specifies the por… |
| 1.3.6.1.4.1.3902.1012.3.50.11.1.1.6 | ColumnzxGponTcontIndex | read-only | current | This attribute indicates the index of T-CONT in ONT, from 1 to M. |
| 1.3.6.1.4.1.3902.1012.3.50.11.1.1.7 | ColumnzxGponSwitchIndex | read-only | current | This attribute indicates the index of MAC bridge in ONT, from 1 to M. The first byte specifies the slot Id associated with this MAC bridge; the second byte spe… |
| 1.3.6.1.4.1.3902.1012.3.50.11.1.1.8 | ColumnzxGponGemPortIndex | read-only | current | This attribute specifies the gemport id. |
| 1.3.6.1.4.1.3902.1012.3.50.11.1.1.9 | ColumnzxGponBridgePortType | read-only | current | This attribute specifies the bridge port type. UNI/FLOW/IPHOST |
| 1.3.6.1.4.1.3902.1012.3.50.11.1.1.10 | ColumnzxGponBridgePortIndex | read-only | current | This attribute specifies the bridge port index. type size MSB LSB UNI: 2bytes FLOW: 1byte IPHOST: 1byte |
| 1.3.6.1.4.1.3902.1012.3.50.11.1.1.11 | ColumnzxGponServiceIndex | not-accessible | current | This attribute specifies the index of the service. |
| 1.3.6.1.4.1.3902.1012.3.50.11.2 | TablezxGponONTTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1 | RowzxGponONTEntry | not-accessible | current | It is entry in the zxGponONTTable. |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.1 | ColumnzxGponONTVendorId | read-only | current | This attribute identifies the vendor of the ONT, and is the same as the 4 most significant bytes of the ONT serial number as specified in ITU-T Rec. G.983.1. U… |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.2 | ColumnzxGponONTVersion | read-only | current | This attribute identifies the version of the ONT as defined by the vendor. The printable value of '0' is used when version information is not available or appl… |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.3 | ColumnzxGponONTSerialNum | read-only | current | The serial number is unique for each ONT. The first four bytes are the ASCII encoded vendor ID four letter mnemonic. The second four bytes are a binary encoded… |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.4 | ColumnzxGponONTTrafficOpt | read-only | current | This attribute identifies the upstream traffic management function implememted in the ONT. 1) 'Priority controlled and flexibly scheduled upstream traffic' (0x… |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.5 | ColumnzxGponONTVpVcCrossOpt | read-only | current | It identifies the support of ATM VP or VC cross-connection management functions for the interworking connections to non ATM UNIs. 0 means no cross-connection m… |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.6 | ColumnzxGponONTBatteryBackup | read-write | current | This attribute provides a Boolean indication of whether or not the ONT/NT supports battery backup. False will indicate that no battery is provisioned; true ind… |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.7 | ColumnzxGponONTAdminState | read-write | current | This attribute is used to activate (unlock: value 0x00) and deactivate (lock: value 0x01) the functions performed by instances of this managed entity.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.8 | ColumnzxGponONTOperState | read-only | current | This attribute indicates whether or not a managed entity is capable of performing its task. Valid values are enabled (0x00) and disabled (0x01).(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.9 | ColumnzxGponONTEquipId | read-only | current | This attribute may be used to identify the specific type of ONT. In North America, this may be used for the equipment CLEI code.(20 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.10 | ColumnzxGponONTOmccVersion | read-only | current | This attribute is used to identify the specific version of the OMCC protocol being used by the ONT. This is used to allow the OLT to manage a network with ONTs… |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.11 | ColumnzxGponONTVendorProductCode | read-only | current | This attribute is used to provide a vendor-specific product code for the ONT.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.12 | ColumnzxGponONTSecurityCap | read-only | current | This attribute is used to advertise the advanced security modes of the ONT. The following codepoints are defined: 0: Reserved for future use; 1: AES encryption… |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.13 | ColumnzxGponONTSecurityMode | read-write | current | This attribute is used to select the advanced security mode for the ONT. Note that all secure VPs/VCs or GEM ports in an ONT must use the same security mode at… |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.14 | ColumnzxGponONTTotalPrioQueueNum | read-only | current | This attribute provides a total number of priority queues which are not associated with the PON IF circuit pack. Maximum value is 0x0FFF. Upautonomous instanti… |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.15 | ColumnzxGponONTTotalTrafficSchNum | read-only | current | This attribute provides a total number of Traffic Schedulers which are not associated with the PON IF circuit pack. The ONT supports NULL function, HOL schedul… |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.16 | ColumnzxGponONTMode | read-only | current | This attribute identifies whether the ONT can operate in ATM-only mode (0x00), GEM-only mode (0x01), or dual (both ATM and GEM) mode (0x02).(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.17 | ColumnzxGponOnuActualType | read-only | current | This attribute identifies ONU actual type. |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.18 | ColumnzxGponOnuSurvivalTime | read-only | current | This attribute indicates the minimum guaranteed time in milliseconds between the loss of external power and the silence of the ONU. This does not include survi… |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.19 | ColumnzxGponOnuTotalGemPortNum | read-only | current | This attribute reports the total number of GEM port-IDs supported by the ONU. The maximum value is specified in the corresponding TC recommendation [ITU-T G.98… |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.20 | ColumnzxGponOnuSysUpTime | read-only | current | This attribute counts 10 ms intervals since the ONU was last initialized. It rolls over to 0 when full (see [IETF RFC 1213]). (R) (optional) (4 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.11.2.1.21 | ColumnzxGponOnuAlias | read-write | current | This attribute identifies ONU alias. |
| 1.3.6.1.4.1.3902.1012.3.50.11.3 | TablezxGponONTActionTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.11.3.1 | RowzxGponONTActionEntry | not-accessible | current | It is entry in the zxGponONTActionTable. |
| 1.3.6.1.4.1.3902.1012.3.50.11.3.1.1 | ColumnzxGponONTReboot | read-write | current | This attribute identifies the action of the ONT. |
| 1.3.6.1.4.1.3902.1012.3.50.11.3.1.2 | ColumnzxGponONTTest | read-write | current | This attribute identifies the action of the ONT. |
| 1.3.6.1.4.1.3902.1012.3.50.11.3.1.3 | ColumnzxGponONTSyncTime | read-write | current | This attribute identifies the action of the ONT. |
| 1.3.6.1.4.1.3902.1012.3.50.11.3.1.4 | ColumnzxGponONTRestore | read-write | current | This attribute identifies the action of the ONT. That is resetting the ONT's MIB. |
| 1.3.6.1.4.1.3902.1012.3.50.11.3.1.5 | ColumnzxGponONTTestResult | read-only | current | This attribute identifies the result of testing ONT. |
| 1.3.6.1.4.1.3902.1012.3.50.11.3.1.6 | ColumnzxGponONTRestoreFactory | read-write | current | This attribute identifies the action of the ONT, restores the ONT's factory set. |
| 1.3.6.1.4.1.3902.1012.3.50.11.4 | TablezxGponSoftwareImageTable | not-accessible | current | This managed entity represents a program stored in the ONT. Two instances of the software image managed entity are contained in an instance of an ONT or equipm… |
| 1.3.6.1.4.1.3902.1012.3.50.11.4.1 | RowzxGponSoftwareImageEntry | not-accessible | current | It is entry in the zxGponSoftwareImageTable. |
| 1.3.6.1.4.1.3902.1012.3.50.11.4.1.1 | ColumnzxGponSoftwareImageIndex | read-only | current | This attribute provides a unique number for each instance of this managed entity. The number consists of a two-byte field. The first field (MSB) identifies the… |
| 1.3.6.1.4.1.3902.1012.3.50.11.4.1.2 | ColumnzxGponSoftwareImageVersion | read-only | current | This attribute identifies the version of the software. Upon autonomous instantiation, this attribute consists of all spaces.(14 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.11.4.1.3 | ColumnzxGponSoftwareImageIsCommitted | read-only | current | This attribute indicates whether the associated software image is 'committed' (value 0x01) or 'uncommitted' (value 0x00). By definition, the 'committed' softwa… |
| 1.3.6.1.4.1.3902.1012.3.50.11.4.1.4 | ColumnzxGponSoftwareImageIsActive | read-only | current | This attribute indicates whether the associated software image is 'active' (value 0x01) or 'inactive' (value 0x00). By definition, the active software image is… |
| 1.3.6.1.4.1.3902.1012.3.50.11.4.1.5 | ColumnzxGponSoftwareImageIsValid | read-only | current | This attribute indicates whether the associated software image is 'valid' (value 0x01) or 'invalid (value 0x00). By definition, a software image is 'valid' if … |
| 1.3.6.1.4.1.3902.1012.3.50.11.5 | TablezxGponSoftwareImageActionTable | not-accessible | current | This managed entity represents a program management in the ONT. |
| 1.3.6.1.4.1.3902.1012.3.50.11.5.1 | RowzxGponSoftwareImageActionEntry | not-accessible | current | It is entry in the zxGponSoftwareImageActionTable. |
| 1.3.6.1.4.1.3902.1012.3.50.11.5.1.1 | ColumnzxGponSoftwareImageActionType | read-write | current | This attribute initiates the action type of image update. In updating, 'zxGponSoftwareImageActionVersion', 'zxGponSoftwareImageActionOntList','zxGponSoftwareIm… |
| 1.3.6.1.4.1.3902.1012.3.50.11.5.1.2 | ColumnzxGponSoftwareImageActionVersion | read-write | current | This attribute specifies the version name. |
| 1.3.6.1.4.1.3902.1012.3.50.11.5.1.3 | ColumnzxGponSoftwareImageActionOntList | read-write | current | This attribute specifies the ONT list who will be told to update the version. |
| 1.3.6.1.4.1.3902.1012.3.50.11.5.1.4 | ColumnzxGponSoftwareImageActionOntNum | read-write | current | This attribute specifies the ONT number who will be told to update the version. |
| 1.3.6.1.4.1.3902.1012.3.50.11.5.1.5 | ColumnzxGponSoftwareImageActionOntSlot | read-write | current | This attribute specifies the ONT slot who will be told to update the version. Default as 0, for update the version of ONT itself; Otherwise, the line card vers… |
| 1.3.6.1.4.1.3902.1012.3.50.11.6 | TablezxGponSoftwareImageMaintTable | not-accessible | current | This managed entity represents the image maintenance in the ONT. |
| 1.3.6.1.4.1.3902.1012.3.50.11.6.1 | RowzxGponSoftwareImageMaintEntry | not-accessible | current | It is entry in the zxGponSoftwareImageMaintTable. |
| 1.3.6.1.4.1.3902.1012.3.50.11.6.1.1 | ColumnzxGponSoftwareImageMaintType | read-write | current | This attribute initiates the maintenance type of image(activate or commit). |
| 1.3.6.1.4.1.3902.1012.3.50.11.6.1.2 | ColumnzxGponSoftwareImageMaintOntList | read-write | current | This attribute specifies the ONT list who will be told to activate or commit the version. |
| 1.3.6.1.4.1.3902.1012.3.50.11.6.1.3 | ColumnzxGponSoftwareImageMaintOntNum | read-write | current | This attribute specifies the ONT number who will be told to update the version. |
| 1.3.6.1.4.1.3902.1012.3.50.11.6.1.4 | ColumnzxGponSoftwareImageMaintImgIndex | read-write | current | This two-byte field is composed of 'onu slot' and 'region id'. The MSB is 'onu slot', usually as 0; The LSB is 'region id', sepecified as 0 or 1. |
| 1.3.6.1.4.1.3902.1012.3.50.11.7 | TablezxGponSoftwareImageUpdateStatusTable | not-accessible | current | This managed entity represents the image update status of the ONT. |
| 1.3.6.1.4.1.3902.1012.3.50.11.7.1 | RowzxGponSoftwareImageUpdateStatusEntry | not-accessible | current | It is entry in the zxGponSoftwareImageUpdateStatusTable. |
| 1.3.6.1.4.1.3902.1012.3.50.11.7.1.1 | ColumnzxGponSoftwareImageUpdateStatus | read-only | current | This attribute indicates the status of updaing.0xFFFF indicates status of 'NA'. |
| 1.3.6.1.4.1.3902.1012.3.50.11.7.1.2 | ColumnzxGponSoftwareImageUpdateStatusAbortReason | read-only | current | This attribute indicates the reason when abort. |
| 1.3.6.1.4.1.3902.1012.3.50.11.7.1.3 | ColumnzxGponSoftwareImageUpdateStatusPercent | read-only | current | This attribute indicates the percent of updating. |
| 1.3.6.1.4.1.3902.1012.3.50.11.7.1.4 | ColumnzxGponSoftwareImageUpdateStatusCurUsedVerName | read-only | current | This attribute indicates the name of the version current used. |
| 1.3.6.1.4.1.3902.1012.3.50.11.7.1.5 | ColumnzxGponSoftwareImageUpdateStatusCurUsedVerTime | read-only | current | This attribute indicates the time of the version current used. |
| 1.3.6.1.4.1.3902.1012.3.50.11.7.1.6 | ColumnzxGponSoftwareImageUpdateStatusUpdatingVerName | read-only | current | This attribute indicates the name of the version updating. |
| 1.3.6.1.4.1.3902.1012.3.50.11.7.1.7 | ColumnzxGponSoftwareImageUpdateStatusUpdatingVerTime | read-only | current | This attribute indicates the time of the version updating. |
| 1.3.6.1.4.1.3902.1012.3.50.11.8 | TablezxGponONTPowerSheddingTable | not-accessible | current | This managed entity models the ONT's ability to shed services when the ONT goes into battery operation mode after AC power failure. |
| 1.3.6.1.4.1.3902.1012.3.50.11.8.1 | RowzxGponONTPowerSheddingEntry | not-accessible | current | It is entry in the zxGponONTPowerSheddingTable. |
| 1.3.6.1.4.1.3902.1012.3.50.11.8.1.1 | ColumnzxGponONTPowerSheddingRestoreInterval | read-write | current | The time delay, in seconds, before resetting shedding timers after full power restoration. Upon ME instantiation, the ONT sets this attribute to 0. (R, W) (man… |
| 1.3.6.1.4.1.3902.1012.3.50.11.8.1.2 | ColumnzxGponONTPowerSheddingDataSheddingInterval | read-write | current | For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is… |
| 1.3.6.1.4.1.3902.1012.3.50.11.8.1.3 | ColumnzxGponONTPowerSheddingVoiceSheddingInterval | read-write | current | For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is… |
| 1.3.6.1.4.1.3902.1012.3.50.11.8.1.4 | ColumnzxGponONTPowerSheddingVideoOverlaySheddingInterval | read-write | current | For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is… |
| 1.3.6.1.4.1.3902.1012.3.50.11.8.1.5 | ColumnzxGponONTPowerSheddingVideoReturnSheddingInterval | read-write | current | For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is… |
| 1.3.6.1.4.1.3902.1012.3.50.11.8.1.6 | ColumnzxGponONTPowerSheddingDSLSheddingInterval | read-write | current | For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is… |
| 1.3.6.1.4.1.3902.1012.3.50.11.8.1.7 | ColumnzxGponONTPowerSheddingATMSheddingInterval | read-write | current | For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is… |
| 1.3.6.1.4.1.3902.1012.3.50.11.8.1.8 | ColumnzxGponONTPowerSheddingCESSheddingInterval | read-write | current | For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is… |
| 1.3.6.1.4.1.3902.1012.3.50.11.8.1.9 | ColumnzxGponONTPowerSheddingFrameSheddingInterval | read-write | current | For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is… |
| 1.3.6.1.4.1.3902.1012.3.50.11.8.1.10 | ColumnzxGponONTPowerSheddingSONETSheddingInterval | read-write | current | For each class of service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is… |
| 1.3.6.1.4.1.3902.1012.3.50.11.8.1.11 | ColumnzxGponONTPowerSheddingSheddingStatus | read-only | current | Boolean indication of power shedding status for each shedding class. If this two-byte field is depicted 0b ABCD EFGH IJKL MNOP, its bits are assigned: A Data c… |
| 1.3.6.1.4.1.3902.1012.3.50.11.9 | TablezxGponOnuHgConfigTable | not-accessible | current | ONU Home Gateway MAC Code. |
| 1.3.6.1.4.1.3902.1012.3.50.11.9.1 | RowzxGponOnuHgConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.11.9.1.1 | ColumnzxGponOnuHgMacWildcard | read-write | current | ONU Home Gateway wildcard MAC |
| 1.3.6.1.4.1.3902.1012.3.50.11.9.1.2 | ColumnzxGponOnuHgVlan | read-write | current | ONU Home Gateway Vlan. 0 indicated no concern about whether the connected home gateway. |
| 1.3.6.1.4.1.3902.1012.3.50.11.10 | TablezxGponOnuHgStateTable | not-accessible | current | ONU Home Gateway state. |
| 1.3.6.1.4.1.3902.1012.3.50.11.10.1 | RowzxGponOnuHgStateEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.11.10.1.1 | ColumnzxGponOnuHgMac | read-write | current | ONU Home Gateway MAC Address. |
| 1.3.6.1.4.1.3902.1012.3.50.11.10.1.2 | ColumnzxGponOnuHgState | read-write | current | ONU Home Gateway state. |
| 1.3.6.1.4.1.3902.1012.3.50.11.11 | NodezxGponOnuVersionUpdate | |||
| 1.3.6.1.4.1.3902.1012.3.50.11.11.1 | ScalarzxGponOnuType | read-write | current | This attribute specifies the ONT type who will be told to update the version. |
| 1.3.6.1.4.1.3902.1012.3.50.11.11.2 | ScalarzxGponOnuUpdateVerFile | read-write | current | This attribute specifies the version file name. |
| 1.3.6.1.4.1.3902.1012.3.50.11.11.3 | ScalarzxGponOnuUpdateAction | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.11.12 | TablezxGponOnuAutoUpdateTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.11.12.1 | RowzxGponOnuAutoUpdateEntry | not-accessible | current | It is entry in the zxGponOnuAutoUpdateTable. |
| 1.3.6.1.4.1.3902.1012.3.50.11.12.1.1 | ColumnzxGponOnuAutoUpdateEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.11.12.1.2 | ColumnzxGponOnuAutoUpdateVerFile | read-write | current | NULL string means that version file not specified. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14 | TablezxGponOnuCapabilityTable | not-accessible | current | GPON ONU capability table |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1 | RowzxGponOnuCapabilityEntry | not-accessible | current | It is entry in the zxGponOnuCapabilityTable. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.1 | ColumnzxGponOnuCapTcontNum | read-only | current | This attribute reports the total number of TCONT-IDs supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.2 | ColumnzxGponOnuCapGemPortNum | read-only | current | This attribute reports the total number of GEM port-IDs supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.3 | ColumnzxGponOnuCapTotalPriQueueNum | read-only | current | This attribute reports the total number of priority queues supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.4 | ColumnzxGponOnuCapUpPriQueueNum | read-only | current | This attribute reports the total number of upstream priority queues supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.5 | ColumnzxGponOnuCapDownPriQueueNum | read-only | current | This attribute reports the total number of downstream priority queues supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.6 | ColumnzxGponOnuCapTrafficScheduleNum | read-only | current | This attribute reports the total number of traffic schedule supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.7 | ColumnzxGponOnuCapTrafficMngMode | read-only | current | This attribute indicates that the mode of traffic management. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.8 | ColumnzxGponOnuCapTotalUniNum | read-only | current | This attribute reports the total number of UNI supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.9 | ColumnzxGponOnuCapEthUniNum | read-only | current | This attribute reports the number of ethernet UNI supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.10 | ColumnzxGponOnuCapGeUniNum | read-only | current | This attribute reports the number of GE UNI supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.11 | ColumnzxGponOnuCapFeUniNum | read-only | current | This attribute reports the number of FE UNI supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.12 | ColumnzxGponOnuCapCesUniNum | read-only | current | This attribute reports the number of CES UNI supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.13 | ColumnzxGponOnuCapPotsUniNum | read-only | current | This attribute reports the number of POTS UNI supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.14 | ColumnzxGponOnuCapVideoUniNum | read-only | current | This attribute reports the number of video UNI supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.15 | ColumnzxGponOnuCapWifiUniNum | read-only | current | This attribute reports the number of WIFI UNI supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.16 | ColumnzxGponOnuCapIpHostNum | read-only | current | This attribute reports the number of IP Host supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.17 | ColumnzxGponOnuCapVeipNum | read-only | current | This attribute reports the number of virtual ethernet interface point supported by the ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.18 | ColumnzxGponOnuCapOperatorId | read-only | current | This attribute indicates that the Operator id. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.19 | ColumnzxGponOnuCapCtcSpecVersion | read-only | current | This attribute indicates that the CTC specific version. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.20 | ColumnzxGponOnuCapOnuApplyType | read-only | current | This attribute indicates that the type of ONU application. |
| 1.3.6.1.4.1.3902.1012.3.50.11.14.1.21 | ColumnzxGponOnuCapTxPowerSupplyCtrl | read-only | current | This attribute indicates that the ONU type. |
| 1.3.6.1.4.1.3902.1012.3.50.11.15 | TablezxGponOnuDhcpOption60Table | not-accessible | current | Configuration of ONT DHCP Option60 |
| 1.3.6.1.4.1.3902.1012.3.50.11.15.1 | RowzxGponOnuDhcpOption60Entry | not-accessible | current | It is entry in the zxGponOnuDhcpOption60Table. |
| 1.3.6.1.4.1.3902.1012.3.50.11.15.1.1 | ColumnzxGponOnuDhcpOption60Enable | read-write | current | This attribute controls whether the ONU should insert option60 string or not. |
| 1.3.6.1.4.1.3902.1012.3.50.11.15.1.2 | ColumnzxGponOnuDhcpOption60VendorId | read-write | current | This attribute contains the vendor class identifier when option60 insertion is enabled on ONU.If option60 is disabled, 'zxGponOnuDhcpOption60VendorId' size is … |
| 1.3.6.1.4.1.3902.1012.3.50.12 | NodezxGponRmANIMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.12.1 | TablezxGponPonTable | not-accessible | current | This managed entity is used to organize data associated with the Access Network Interface supported by the ONT. One instance of this managed entity exists for … |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1 | RowzxGponPonEntry | not-accessible | current | It is entry in the zxGponPonTable. |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.1 | ColumnzxGponPonSRInd | read-only | current | This Boolean attribute indicates the capability of status reporting. The value TRUE means that the status reporting is available for all T-CONTs which are asso… |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.2 | ColumnzxGponPonTotalTcontNum | read-only | current | This attribu provides the total number of T-CONTs that are able to be supported in this ANI port.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.3 | ColumnzxGponPonGemBlockLen | read-write | current | This attribute indicates the reporting block size for GEM mode in units of bytes. The value which the OLT sets is used by all T-CONTs in this ANI. Upon autonom… |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.4 | ColumnzxGponPonPiggybackDBAReporting | read-only | current | The following coding is used to indicate the ONT's piggyback DBA reporting mode capabilities: 0x00: supports mode 0 only; 0x01: supports modes 0 and 1; 0x02: s… |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.5 | ColumnzxGponPonWholeOnuDBAReporting | read-only | current | Valid values are 0x00 (whole ONU DBA reporting is not supported) and 0x01 (whole ONU DBA reporting is supported).(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.6 | ColumnzxGponPonSFThreshold | read-write | current | This attribute represents the upstream/downstream BER threshold to detect SFi/SF alarm. When this value is y in decimal, the BER threshold for SFi/SF is 10^(-y… |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.7 | ColumnzxGponPonSDThreshold | read-write | current | This attribute represents the upstream/downstream BER threshold to detect SDi/SD alarm. When this value is x in decimal, the BER threshold for SDi/SD is 10^(-x… |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.8 | ColumnzxGponPonAlarmReport | read-write | current | Alarm reporting control. 0(enable): Allow alarm reporting, 1(disable): Suppress alarm reporting.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.9 | ColumnzxGponPonAlarmDisableInterval | read-write | current | Alarm reporting control interval. 0: Allow alarm reporting immediately when port is trouble free. 1-254: The duration in minutes for alarm suppression. 255: Su… |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.10 | ColumnzxGponPonRxOpticalLevel | read-only | current | This attribute reports the current measurement of total optical signal level at 1490 nm. Its value is a 2s complement integer referred to 1 mW (ie dBm), with 0… |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.11 | ColumnzxGponPonLowerRxOpticalThreshold | read-write | current | This attribute specifies the optical level the ONT uses to declare the 1490 nm low received optical power alarm. Valid values are -127 dBm (coded as 254) to 0 … |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.12 | ColumnzxGponPonUpperRxOpticalThreshold | read-write | current | This attribute specifies the optical level the ONT uses to declare the 1490 nm high received optical power alarm. Valid values are -127 dBm (coded as 254) to 0… |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.13 | ColumnzxGponPonOntResponseTime | read-only | current | This attribute indicates actual ONT response time recorded by ONT. The unit is nanoseconds.(2 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.14 | ColumnzxGponPonTxOpticalLevel | read-only | current | This attribute reports the current measurement of optical transmit power level. Its value is a 2s complement integer referred to 1 mW (ie dBm), with 0.002 dB g… |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.15 | ColumnzxGponPonLowerTxOpticalThreshold | read-write | current | This attribute specifies the transmit power level the ONT uses to declare the low transmit optical power alarm. Its value is a 2s complement integer referred t… |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.16 | ColumnzxGponPonUpperTxOpticalThreshold | read-write | current | This attribute specifies the transmit power level the ONT uses to declare the high transmit optical power alarm. Its value is a 2s complement integer referred … |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.17 | ColumnzxGponPonPowerFeedVoltage | read-only | current | DC voltage, 2s complement, 20 mV resolution.(2 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.18 | ColumnzxGponPonLaserBiasCurrent | read-only | current | 2s complement, 2 uA resolution.(2 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.19 | ColumnzxGponPonTemperature | read-only | current | 2s complement, 1/256 degree C resolution.(2 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.20 | ColumnzxGponPonLowerVoltageThreshold | read-write | current | (2 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.21 | ColumnzxGponPonUpperVoltageThreshold | read-write | current | (2 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.22 | ColumnzxGponPonLowerCurrentThreshold | read-write | current | (2 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.23 | ColumnzxGponPonUpperCurrentThreshold | read-write | current | (2 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.24 | ColumnzxGponPonLowerTemperatureThreshold | read-write | current | (2 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.12.1.1.25 | ColumnzxGponPonUpperTemperatureThreshold | read-write | current | (2 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.13 | NodezxGponRmFlowMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.13.1 | TablezxGponFlowTable | not-accessible | current | Configuration of flow. |
| 1.3.6.1.4.1.3902.1012.3.50.13.1.1 | RowzxGponFlowEntry | not-accessible | current | It is entry in the zxGponFlowTable. |
| 1.3.6.1.4.1.3902.1012.3.50.13.1.1.1 | ColumnzxGponFlowType | read-write | current | This attribute indicates the upstream mapping type of flow. Default as type of 'switch'. |
| 1.3.6.1.4.1.3902.1012.3.50.13.1.1.2 | ColumnzxGponFlowIfId | read-write | current | The interface id which is related with this flow. It can be the IfId of switch, ethuni, ethflow or iphost, according to the zxGponFlowType. The format as below… |
| 1.3.6.1.4.1.3902.1012.3.50.13.1.1.3 | ColumnzxGponFlowEntryStatus | read-write | current | This attribute indicates the operation of the entry. |
| 1.3.6.1.4.1.3902.1012.3.50.13.2 | TablezxGponFlowTciModeTable | not-accessible | current | This managed entity is used to set the upstream tci mapping mode of the flow. It only can be set if the 'type' of flow is 'switch'. It also can say that if the… |
| 1.3.6.1.4.1.3902.1012.3.50.13.2.1 | RowzxGponFlowTciModeEntry | not-accessible | current | It is entry in the zxGponFlowTciModeTable. |
| 1.3.6.1.4.1.3902.1012.3.50.13.2.1.1 | ColumnzxGponFlowTciModeForwardOper | read-write | current | When a frame is received, the frame is processed according to the following Forward Operations. The operations are invoked based on the value of VID, user prio… |
| 1.3.6.1.4.1.3902.1012.3.50.13.3 | TablezxGponFlowTciTable | not-accessible | current | When the tci mode of the flow is vid-filter/prio-filter/prio-vid-filter/vid-match/prio-match/prio-vid-match, the tci entries can be added. |
| 1.3.6.1.4.1.3902.1012.3.50.13.3.1 | RowzxGponFlowTciEntry | not-accessible | current | It is entry in the zxGponFlowTciTable. |
| 1.3.6.1.4.1.3902.1012.3.50.13.3.1.1 | ColumnzxGponFlowTciIndex | read-write | current | This attribute specifies the TCI value which is provisioned at a bridging port.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.13.3.1.2 | ColumnzxGponFlowTciEntryStatus | read-write | current | This attribute provides the number of entries in the VLAN Filter Table that are valid.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.13.4 | TablezxGponGemFlowTable | not-accessible | current | Configuration of GEM flow. |
| 1.3.6.1.4.1.3902.1012.3.50.13.4.1 | RowzxGponGemFlowEntry | not-accessible | current | It is entry in the zxGponGemFlowTable. |
| 1.3.6.1.4.1.3902.1012.3.50.13.4.1.1 | ColumnzxGponGemFlowId | read-write | current | This attribute indicates the flow id related with this GEM flow. |
| 1.3.6.1.4.1.3902.1012.3.50.13.4.1.2 | ColumnzxGponGemFlowPriBitMap | read-write | current | This attribute indicates the priority bit map of this GEM flow. This bitmap specifies the priorities used by this connection when using 802.1p mapping. Each bi… |
| 1.3.6.1.4.1.3902.1012.3.50.13.4.1.3 | ColumnzxGponGemFlowEntryStatus | read-write | current | This attribute indicates the operation of the entry. |
| 1.3.6.1.4.1.3902.1012.3.50.13.5 | TablezxGponGemLoopTable | not-accessible | current | Configuration of GEM loopback. |
| 1.3.6.1.4.1.3902.1012.3.50.13.5.1 | RowzxGponGemLoopEntry | not-accessible | current | It is entry in the zxGponGemLoopTable. |
| 1.3.6.1.4.1.3902.1012.3.50.13.5.1.1 | ColumnzxGponGemLoopConfig | read-write | current | This attribute indicates the loop configuration with this GEMPort. |
| 1.3.6.1.4.1.3902.1012.3.50.14 | NodezxGponRmEthMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.14.1 | TablezxGponPptpEthUNITable | not-accessible | current | This managed entity represents the points at an Ethernet UNI in the ONT where physical paths terminate and physical path level functions (e.g., Ethernet functi… |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1 | RowzxGponPptpEthUNIEntry | not-accessible | current | It is entry in the zxGponPptpEthUNITable. |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1.1 | ColumnzxGponPptpEthUNIExpectedType | read-write | current | The following coding is used for this attribute: 0x00 = by autosensing, 0x01 to 0xFE (1 to 254) = one of the values from Table 3 that is compatible with the ty… |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1.2 | ColumnzxGponPptpEthUNISensedType | read-only | current | If the value of 'Expected type' is not equal to 0x00, then the value of 'Sensed type' equals the value of 'Expected type'. If the value of 'Expected type' equa… |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1.3 | ColumnzxGponPptpEthUNIIfSpeedConfig | read-write | current | For 10/100 Base-Tx Ethernet interfaces, this attribute is used to set the configuration options: Auto-sensing: 0x00; 10BaseT: 0x01; 100BaseT: 0x02: Gigabit Eth… |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1.4 | ColumnzxGponPptpEthUNIEthLookbackConfig | read-write | current | This attribute is used to set the Ethernet loopback configuration: No loopback (value 0x00), Loop3 (value 0x03, Loopback of downstream traffic after PHY transc… |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1.5 | ColumnzxGponPptpEthUNIAdminState | read-write | current | This attribute is used to activate (unlock: value 0x00) and deactivate (lock: value 0x01) the functions performed by instances of this managed entity.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1.6 | ColumnzxGponPptpEthUNIOperState | read-only | current | This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive … |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1.7 | ColumnzxGponPptpEthUNIIfSpeedStatus | read-only | current | This attribute indicates the configuration status of the Ethernet UNI. 10BaseT (full duplex): 0x01; 100BaseT (full duplex): 0x02; Gigabit Ethernet (full duplex… |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1.8 | ColumnzxGponPptpEthUNIMaxFrameSize | read-write | current | This attribute denotes the maximum allowed frame size to be transmitted across this interface. Upon autonomous instantiation, the value 1518 is used.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1.9 | ColumnzxGponPptpEthUNIDteOrDceInd | read-write | current | This attribute indicates whether the Ethernet interface wiring is DTE or DCE (DCE: 0x00; DTE: 0x01). Upon autonomous instantiation, the value 0x00 is used.(1 b… |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1.10 | ColumnzxGponPptpEthUNIPauseTime | read-write | current | This attribute allows the ONT line card to request that the customer terminal temporarily suspend sending data. Units are in 'pause_quanta' (1 pause_quantum eq… |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1.11 | ColumnzxGponPptpEthUNIBridgeOrIpInd | read-write | current | This attribute indicates whether the Ethernet interface is bridged or derived from an IP router function (Bridged: 0x00; IP router: 0x01; 0x02: depends on Circ… |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1.12 | ColumnzxGponPptpEthUNIARC | read-write | current | This attribute is used to control alarm reporting from this managed entity. See I.1.8 for a complete description.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1.13 | ColumnzxGponPptpEthUNIARCInterval | read-write | current | This attribute provides a provisionable length of time. See I.1.8 for a complete description.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1.14 | ColumnzxGponPptpEthUNIPPPoEFilter | read-write | current | This attribute may be used to control filtering of PPPoE packets on this Ethernet port. The value 0x00 is used to disable filtering. The value 0x01 is used to … |
| 1.3.6.1.4.1.3902.1012.3.50.14.1.1.15 | ColumnzxGponPptpEthUNIPowerControl | read-write | current | This attribute controls whether power is provided to an external equipment over the Ethernet PPTP. Value 0x01 enables power over Ethernet. The default value 0x… |
| 1.3.6.1.4.1.3902.1012.3.50.14.2 | TablezxGponUniMirrorTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.14.2.1 | RowzxGponUniMirrorEntry | not-accessible | current | It is entry in the zxGponUniMirrorTable. |
| 1.3.6.1.4.1.3902.1012.3.50.14.2.1.1 | ColumnzxGponUniMirrorGemPortIndex | read-create | current | This attribute specifies the gemport for mirror. zxGponUniMirrorGemPortIndex depends on the records of zxGponGemFlowTable |
| 1.3.6.1.4.1.3902.1012.3.50.14.2.1.2 | ColumnzxGponUniMirrorDirection | read-create | current | This attribute specifies the direction of mirror. |
| 1.3.6.1.4.1.3902.1012.3.50.14.2.1.30 | ColumnzxGponUniMirrorRowStatus | read-create | current | RowStatus of this table |
| 1.3.6.1.4.1.3902.1012.3.50.14.3 | TablezxGponUniDhcpIpRetrieveTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.14.3.1 | RowzxGponUniDhcpIpRetrieveEntry | not-accessible | current | It is entry in the zxGponUniDhcpIpRetrieveTable. |
| 1.3.6.1.4.1.3902.1012.3.50.14.3.1.1 | ColumnzxGponUniDhcpIpRetrieveMode | read-write | current | This attribute specifies the PPTP Ethernet UNI how to obtain its ip address(from ONU or network), when ONU enables the DHCP Server function. |
| 1.3.6.1.4.1.3902.1012.3.50.15 | NodezxGponRmL2Mgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.15.1 | TablezxGponMACBridgeServiceProfileTable | not-accessible | current | This managed entity is used to organize data that affects all ports on a MAC Bridge at a bridged LAN Ethernet UNI interface on the ONT. Zero or more instances … |
| 1.3.6.1.4.1.3902.1012.3.50.15.1.1 | RowzxGponMACBridgeServiceProfileEntry | not-accessible | current | It is entry in the zxGponMACBridgeServiceProfileTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.1.1.1 | ColumnzxGponMACBridgeServiceProfileSpanTreeInd | read-write | current | This Boolean attribute indicates whether or not a spanning tree algorithm is enabled. The value TRUE means enabled.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.1.1.2 | ColumnzxGponMACBridgeServiceProfileLearningInd | read-write | current | This Boolean attribute indicates whether or not the learning functions of the bridge are enabled. The value TRUE means enabled.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.1.1.3 | ColumnzxGponMACBridgeServiceProfileATMPortBridgeInd | read-write | current | This Boolean attribute indicates whether or not bridging between ATM ports on this bridge service is enabled. The value TRUE means enabled. (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.1.1.4 | ColumnzxGponMACBridgeServiceProfilePriority | read-write | current | This attribute indicates the bridge priority set on the LAN card. The range is 0x00 to 0xFFFF (0 to 65535). The value of this attribute is copied to the Bridge… |
| 1.3.6.1.4.1.3902.1012.3.50.15.1.1.5 | ColumnzxGponMACBridgeServiceProfileMaxAge | read-write | current | This attribute indicates the maximum age (in 256ths of a second) for an entry in the spanning tree listing. It indicates the maximum age in 256ths of a second … |
| 1.3.6.1.4.1.3902.1012.3.50.15.1.1.6 | ColumnzxGponMACBridgeServiceProfileHelloTime | read-write | current | This attribute provides the time interval (in 256ths of a second) between hello packets. It is the time interval, in 256ths of a second, that a bridge advertis… |
| 1.3.6.1.4.1.3902.1012.3.50.15.1.1.7 | ColumnzxGponMACBridgeServiceProfileForwardDelay | read-write | current | This attribute gives the time (in 256ths of a second) that the bridge on the Ethernet card in the ONT retains a packet before forwarding it. (It indicates the … |
| 1.3.6.1.4.1.3902.1012.3.50.15.1.1.8 | ColumnzxGponMACBridgeServiceProfileUnknownMACAddrDiscard | read-write | current | This Boolean attribute indicates the treatment of MAC frames with unknown destination addresses. The value TRUE means that frames with unknown destination addr… |
| 1.3.6.1.4.1.3902.1012.3.50.15.1.1.9 | ColumnzxGponMACBridgeServiceProfileMACLearningDepth | read-write | current | This attribute specifies the maximum number of UNI MAC addresses to be learned by the bridge. The default value 0 specifies that there is no administratively-i… |
| 1.3.6.1.4.1.3902.1012.3.50.15.2 | TablezxGponMACBridgeConfigDataTable | not-accessible | current | This managed entity is used to organize and record data that is associated with bridged LAN configurations. Some of the data is volatile. This managed entity i… |
| 1.3.6.1.4.1.3902.1012.3.50.15.2.1 | RowzxGponMACBridgeConfigDataEntry | not-accessible | current | It is entry in the zxGponMACBridgeConfigDataTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.2.1.1 | ColumnzxGponMACBridgeConfigDataBridgeMACAddr | read-only | current | This attribute indicates the MAC address used by the bridge. Upon autonomous instantiation, this attribute consists of all 0x00.(6 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.2.1.2 | ColumnzxGponMACBridgeConfigDataBridgePrio | read-only | current | This attribute denotes the priority of the bridge and is positive integer-valued. Upon autonomous instantiation, the value 0x8000 is used. The value of this at… |
| 1.3.6.1.4.1.3902.1012.3.50.15.2.1.3 | ColumnzxGponMACBridgeConfigDataDesignatedRoot | read-only | current | This attribute provides the bridge identifier for the root of the spanning tree. This attribute consists of Bridge Priority (2 bytes) and MAC address (6 bytes)… |
| 1.3.6.1.4.1.3902.1012.3.50.15.2.1.4 | ColumnzxGponMACBridgeConfigDataRootPathCost | read-only | current | This attribute provides the cost of the best path to the root as seen from the bridge. Upon autonomous instantiation, the value 0x00 is used.(4 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.2.1.5 | ColumnzxGponMACBridgeConfigDataBridgePortCount | read-only | current | This attribute provides the number of existing ports controlled by this bridge.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.2.1.6 | ColumnzxGponMACBridgeConfigDataRootPortNum | read-only | current | This attribute provides the port number that has the lowest cost from the bridge to the root bridge. The value 0x00 means that the bridge itself is the root. U… |
| 1.3.6.1.4.1.3902.1012.3.50.15.2.1.7 | ColumnzxGponMACBridgeConfigDataHelloTime | read-only | current | This attribute provides the time interval (in 256ths of a second) between hello packets. It is the 'HelloTime' received from the designated root. The range is … |
| 1.3.6.1.4.1.3902.1012.3.50.15.2.1.8 | ColumnzxGponMACBridgeConfigDataForwardDelay | read-only | current | This attribute gives the time (in 256ths of a second) that the bridge on the Ethernet card in the ONT retains a packet before forwarding it. It is the 'Forward… |
| 1.3.6.1.4.1.3902.1012.3.50.15.3 | TablezxGponUNIMACBridgePortConfigTable | not-accessible | current | This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. Zero or more instances of this man… |
| 1.3.6.1.4.1.3902.1012.3.50.15.3.1 | RowzxGponUNIMACBridgePortConfigEntry | not-accessible | current | It is entry in the zxGponUNIMACBridgePortConfigTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.3.1.1 | ColumnzxGponUNIMACBridgePortConfigBridgeId | read-write | current | This attribute is set-by-create, indicating the bridge when create an UNI bridge port. |
| 1.3.6.1.4.1.3902.1012.3.50.15.3.1.2 | ColumnzxGponUNIMACBridgePortConfigBridgePort | read-only | current | This attribute identifies the MAC bridge port associated with the port. The first 2 bytes stand for the slot and bridge group id; The second 2 bytes stand for … |
| 1.3.6.1.4.1.3902.1012.3.50.15.3.1.3 | ColumnzxGponUNIMACBridgePortConfigPortPrio | read-write | current | This attribute denotes the priority of the port. The range is 0x00 to 0x00FF (0 to 255).(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.3.1.4 | ColumnzxGponUNIMACBridgePortConfigPortPathCost | read-write | current | This attribute provides the cost contribution of the port to the path cost towards the spanning tree root bridge. The range is 0x0001 to 0xFFFF (1 to 65535).(2… |
| 1.3.6.1.4.1.3902.1012.3.50.15.3.1.5 | ColumnzxGponUNIMACBridgePortConfigPortSpanTreeInd | read-write | current | This Boolean attribute indicates whether or not STP LAN topology change detection is enabled at this port. The value TRUE means enabled.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.3.1.6 | ColumnzxGponUNIMACBridgePortConfigEncapMethod | read-write | current | This attribute identifies the frame encapsulation method that is used. 0x00: identification by ATM VC; 0x01: LLC encapsulation; This attribute is effective onl… |
| 1.3.6.1.4.1.3902.1012.3.50.15.3.1.7 | ColumnzxGponUNIMACBridgePortConfigLANFCSInd | read-write | current | This attribute indicates whether LAN FCS (Frame Check Sequence) bytes are forwarded (value 0x00) or discarded (value 0x01). This applies in both directions of … |
| 1.3.6.1.4.1.3902.1012.3.50.15.3.1.8 | ColumnzxGponUNIMACBridgePortConfigPortMACAddr | read-only | current | This attribute indicates the Physical MAC address used by the Port as defined by the TPPointer when the TPType is set to LAN.(6 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.3.1.9 | ColumnzxGponUNIMACBridgePortConfigEntryStatus | read-write | current | This attribute indicates the Physical MAC address used by the Port as defined by the TPPointer when the TPType is set to LAN.(6 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.3.1.10 | ColumnzxGponUNIMACBridgePortConfigOutboundTDPtr | read-write | current | This attribute points to a GEM traffic descriptor that limits the traffic rate leaving the MAC bridge(2 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.3.1.11 | ColumnzxGponUNIMACBridgePortConfigInboundTDPtr | read-write | current | This attribute points to a GEM traffic descriptor that limits the traffic rate entering the MAC bridge(2 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.3.1.12 | ColumnzxGponUniMacBPortAddrLearnDepth | read-write | current | This attribute specifies the maximum number of MAC addresses to be learned by this MAC bridge port. The default value 0 specifies that there is no administrati… |
| 1.3.6.1.4.1.3902.1012.3.50.15.3.1.13 | ColumnzxGponUniMacBPortOutboundTdPrf | read-write | current | This name points to a GEM traffic descriptor that limits the traffic rate leaving the MAC bridge. It indicates no rate limiting when the length of value is 0. |
| 1.3.6.1.4.1.3902.1012.3.50.15.3.1.14 | ColumnzxGponUniMacBPortInboundTdPrf | read-write | current | This name points to a GEM traffic descriptor that limits the traffic rate entering the MAC bridge. It indicates no rate limiting when the length of value is 0. |
| 1.3.6.1.4.1.3902.1012.3.50.15.4 | TablezxGponHostMACBridgePortConfigTable | not-accessible | current | This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. Zero or more instances of this man… |
| 1.3.6.1.4.1.3902.1012.3.50.15.4.1 | RowzxGponHostMACBridgePortConfigEntry | not-accessible | current | It is entry in the zxGponHostMACBridgePortConfigTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.4.1.1 | ColumnzxGponHostMACBridgePortConfigBridgeId | read-write | current | This attribute identifies the MAC bridge id associated with the ip host. |
| 1.3.6.1.4.1.3902.1012.3.50.15.4.1.2 | ColumnzxGponHostMACBridgePortConfigBridgePort | read-only | current | This attribute identifies the MAC bridge port associated with the port. The first 2 bytes stand for the slot and bridge group id; The second 2 bytes stand for … |
| 1.3.6.1.4.1.3902.1012.3.50.15.4.1.3 | ColumnzxGponHostMACBridgePortConfigPortPrio | read-write | current | This attribute denotes the priority of the port. The range is 0x00 to 0x00FF (0 to 255).(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.4.1.4 | ColumnzxGponHostMACBridgePortConfigPortPathCost | read-write | current | This attribute provides the cost contribution of the port to the path cost towards the spanning tree root bridge. The range is 0x0001 to 0xFFFF (1 to 65535).(2… |
| 1.3.6.1.4.1.3902.1012.3.50.15.4.1.5 | ColumnzxGponHostMACBridgePortConfigPortSpanTreeInd | read-write | current | This Boolean attribute indicates whether or not STP LAN topology change detection is enabled at this port. The value TRUE means enabled.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.4.1.6 | ColumnzxGponHostMACBridgePortConfigEncapMethod | read-write | current | This attribute identifies the frame encapsulation method that is used. 0x00: identification by ATM VC; 0x01: LLC encapsulation; This attribute is effective onl… |
| 1.3.6.1.4.1.3902.1012.3.50.15.4.1.7 | ColumnzxGponHostMACBridgePortConfigLANFCSInd | read-write | current | This attribute indicates whether LAN FCS (Frame Check Sequence) bytes are forwarded (value 0x00) or discarded (value 0x01). This applies in both directions of … |
| 1.3.6.1.4.1.3902.1012.3.50.15.4.1.8 | ColumnzxGponHostMACBridgePortConfigPortMACAddr | read-only | current | This attribute indicates the Physical MAC address used by the Port as defined by the TPPointer when the TPType is set to LAN.(6 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.4.1.9 | ColumnzxGponHostMACBridgePortConfigEntryStatus | read-write | current | This attribute indicates the Physical MAC address used by the Port as defined by the TPPointer when the TPType is set to LAN.(6 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.5 | TablezxGponFlowMACBridgePortConfigTable | not-accessible | current | This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. Zero or more instances of this man… |
| 1.3.6.1.4.1.3902.1012.3.50.15.5.1 | RowzxGponFlowMACBridgePortConfigEntry | not-accessible | current | It is entry in the zxGponFlowMACBridgePortConfigTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.5.1.1 | ColumnzxGponFlowMACBridgePortConfigBridgePort | read-only | current | This attribute identifies the MAC bridge port associated with the port. The first 2 bytes stand for the slot and bridge group id; The second 2 bytes stand for … |
| 1.3.6.1.4.1.3902.1012.3.50.15.5.1.2 | ColumnzxGponFlowMACBridgePortConfigPortPrio | read-write | current | This attribute denotes the priority of the port. The range is 0x00 to 0x00FF (0 to 255).(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.5.1.3 | ColumnzxGponFlowMACBridgePortConfigPortPathCost | read-write | current | This attribute provides the cost contribution of the port to the path cost towards the spanning tree root bridge. The range is 0x0001 to 0xFFFF (1 to 65535).(2… |
| 1.3.6.1.4.1.3902.1012.3.50.15.5.1.4 | ColumnzxGponFlowMACBridgePortConfigPortSpanTreeInd | read-write | current | This Boolean attribute indicates whether or not STP LAN topology change detection is enabled at this port. The value TRUE means enabled.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.5.1.5 | ColumnzxGponFlowMACBridgePortConfigEncapMethod | read-write | current | This attribute identifies the frame encapsulation method that is used. 0x00: identification by ATM VC; 0x01: LLC encapsulation; This attribute is effective onl… |
| 1.3.6.1.4.1.3902.1012.3.50.15.5.1.6 | ColumnzxGponFlowMACBridgePortConfigLANFCSInd | read-write | current | This attribute indicates whether LAN FCS (Frame Check Sequence) bytes are forwarded (value 0x00) or discarded (value 0x01). This applies in both directions of … |
| 1.3.6.1.4.1.3902.1012.3.50.15.5.1.7 | ColumnzxGponFlowMACBridgePortConfigPortMACAddr | read-only | current | This attribute indicates the Physical MAC address used by the Port as defined by the TPPointer when the TPType is set to LAN.(6 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.6 | TablezxGponFlowDot1pMapServiceProfileTable | not-accessible | current | This managed entity is used to associate the priorities of 802.1P priority tagged frames of a certain Ethernet UNI with a specific connection. One instance of … |
| 1.3.6.1.4.1.3902.1012.3.50.15.6.1 | RowzxGponFlowDot1pMapServiceProfileEntry | not-accessible | current | It is entry in the zxGponFlowDot1pMapServiceProfileTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.6.1.1 | ColumnzxGponFlowDot1pMapServiceProfilePrio0GemPortId | read-only | current | This attribute represents the GEM port id that is associated with P-Bit = 000 tagged frames. The value 0xFFFF is a null pointer.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.6.1.2 | ColumnzxGponFlowDot1pMapServiceProfilePrio1GemPortId | read-only | current | This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 001 tagged frames. The value 0xFFFF is a null pointer… |
| 1.3.6.1.4.1.3902.1012.3.50.15.6.1.3 | ColumnzxGponFlowDot1pMapServiceProfilePrio2GemPortId | read-only | current | This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 010 tagged frames. The value 0xFFFF is a null pointer… |
| 1.3.6.1.4.1.3902.1012.3.50.15.6.1.4 | ColumnzxGponFlowDot1pMapServiceProfilePrio3GemPortId | read-only | current | This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 011 tagged frames. The value 0xFFFF is a null pointer… |
| 1.3.6.1.4.1.3902.1012.3.50.15.6.1.5 | ColumnzxGponFlowDot1pMapServiceProfilePrio4GemPortId | read-only | current | This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 100 tagged frames. The value 0xFFFF is a null pointer… |
| 1.3.6.1.4.1.3902.1012.3.50.15.6.1.6 | ColumnzxGponFlowDot1pMapServiceProfilePrio5GemPortId | read-only | current | This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 101 tagged frames. The value 0xFFFF is a null pointer… |
| 1.3.6.1.4.1.3902.1012.3.50.15.6.1.7 | ColumnzxGponFlowDot1pMapServiceProfilePrio6GemPortId | read-only | current | This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 110 tagged frames. The value 0xFFFF is a null pointer… |
| 1.3.6.1.4.1.3902.1012.3.50.15.6.1.8 | ColumnzxGponFlowDot1pMapServiceProfilePrio7GemPortId | read-only | current | This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 111 tagged frames. The value 0xFFFF is a null pointer… |
| 1.3.6.1.4.1.3902.1012.3.50.15.6.1.9 | ColumnzxGponFlowDot1pMapServiceProfileUnmarkedFrameOption | read-write | current | This attribute indicates how the ONT should handle Untagged Ethernet frames received across the associated Ethernet interface. Valid values include the followi… |
| 1.3.6.1.4.1.3902.1012.3.50.15.6.1.10 | ColumnzxGponFlowDot1pMapServiceProfileDSCP2PBitMap | read-write | current | This attribute is used in conjunction with the Unmarked Frame Option attribute. If unmarked frame option is 0, this attribute structure can be considered a bit… |
| 1.3.6.1.4.1.3902.1012.3.50.15.6.1.11 | ColumnzxGponFlowDot1pMapServiceProfileDefPBitMarking | read-write | current | This attribute is used in conjunction with the Unmarked Frame Option attribute. If unmarked frame option is 1, this attribute contains the default P-Bit priori… |
| 1.3.6.1.4.1.3902.1012.3.50.15.7 | TablezxGponUNIBridgePortMacFilterTable | not-accessible | current | This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. This managed entity is associated … |
| 1.3.6.1.4.1.3902.1012.3.50.15.7.1 | RowzxGponUNIBridgePortMacFilterEntry | not-accessible | current | It is entry in the zxGponUNIBridgePortMacFilterTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.7.1.1 | ColumnzxGponUNIBridgePortMacFilterAddress | read-only | current | This attribute specifies the MAC address being filtered. |
| 1.3.6.1.4.1.3902.1012.3.50.15.7.1.2 | ColumnzxGponUNIBridgePortMacFilterFilterMode | read-write | current | This attribute specifies the filter action. |
| 1.3.6.1.4.1.3902.1012.3.50.15.7.1.3 | ColumnzxGponUNIBridgePortMacFilterEntryStatus | read-write | current | This attribute specifies the operation of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.15.7.1.4 | ColumnzxGponUNIBrgPortMacFilterType | read-write | current | sourceMac: source MAC destinationMac: destination MAC |
| 1.3.6.1.4.1.3902.1012.3.50.15.8 | TablezxGponIPHostBridgePortMacFilterTable | not-accessible | current | This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. This managed entity is associated … |
| 1.3.6.1.4.1.3902.1012.3.50.15.8.1 | RowzxGponIPHostBridgePortMacFilterEntry | not-accessible | current | It is entry in the zxGponIPHostBridgePortMacFilterTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.8.1.1 | ColumnzxGponIPHostBridgePortMacFilterAddress | read-only | current | This attribute specifies the MAC address being filtered. |
| 1.3.6.1.4.1.3902.1012.3.50.15.8.1.2 | ColumnzxGponIPHostBridgePortMacFilterFilterMode | read-write | current | This attribute specifies the filter action. |
| 1.3.6.1.4.1.3902.1012.3.50.15.8.1.3 | ColumnzxGponIPHostBridgePortMacFilterEntryStatus | read-write | current | This attribute specifies the operation of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.15.8.1.4 | ColumnzxGponIpHostBrgPortMacFilterType | read-write | current | sourceMac: source MAC destinationMac: destination MAC |
| 1.3.6.1.4.1.3902.1012.3.50.15.9 | TablezxGponFlowMacFilterTable | not-accessible | current | This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. This managed entity is associated … |
| 1.3.6.1.4.1.3902.1012.3.50.15.9.1 | RowzxGponFlowMacFilterEntry | not-accessible | current | It is entry in the zxGponFlowMacFilterTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.9.1.1 | ColumnzxGponFlowMacFilterAddress | read-only | current | This attribute specifies the MAC address being filtered. |
| 1.3.6.1.4.1.3902.1012.3.50.15.9.1.2 | ColumnzxGponFlowMacFilterFilterMode | read-write | current | This attribute specifies the filter action. |
| 1.3.6.1.4.1.3902.1012.3.50.15.9.1.3 | ColumnzxGponFlowMacFilterEntryStatus | read-write | current | This attribute specifies the operation of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.15.9.1.4 | ColumnzxGponFlowMacFilterType | read-write | current | sourceMac: source MAC destinationMac: destination MAC |
| 1.3.6.1.4.1.3902.1012.3.50.15.10 | TablezxGponUNIMACBridgePortEthFrameFilterTable | not-accessible | current | This managed entity provides an alternate approach to address filtering than that supported through MACBridgePortFilterTableData. This managed entity is associ… |
| 1.3.6.1.4.1.3902.1012.3.50.15.10.1 | RowzxGponUNIMACBridgePortEthFrameFilterEntry | not-accessible | current | It is entry in the zxGponUNIMACBridgePortEthFrameFilterTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.10.1.1 | ColumnzxGponUNIMACBridgePortEthFrameFilterIPv4MCFilter | read-write | current | This attribute indicates whether IPv4Multicast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.10.1.2 | ColumnzxGponUNIMACBridgePortEthFrameFilterIPv6MCFilter | read-write | current | This attribute indicates whether Ipv6Multicast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.10.1.3 | ColumnzxGponUNIMACBridgePortEthFrameFilterIPv4BCFilter | read-write | current | This attribute indicates whether IPv4Broadcast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.10.1.4 | ColumnzxGponUNIMACBridgePortEthFrameFilterRARPFilter | read-write | current | This attribute indicates whether RARP Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.10.1.5 | ColumnzxGponUNIMACBridgePortEthFrameFilterIPXFilter | read-write | current | This attribute indicates whether IPX Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.10.1.6 | ColumnzxGponUNIMACBridgePortEthFrameFilterNetBEUIFilter | read-write | current | This attribute indicates whether NetBEUI Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.10.1.7 | ColumnzxGponUNIMACBridgePortEthFrameFilterAppleTalkFilter | read-write | current | This attribute indicates whether AppleTalk Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.10.1.8 | ColumnzxGponUNIMACBridgePortEthFrameFilterBPDUFilter | read-write | current | This attribute indicates whether BridgeManagementInformation Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.10.1.9 | ColumnzxGponUNIMACBridgePortEthFrameFilterARPFilter | read-write | current | This attribute indicates whether ARP Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.10.1.10 | ColumnzxGponUNIMACBridgePortEthFrameFilterPPPoEFilter | read-write | current | This attribute indicates whether PPPoE Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.11 | TablezxGponIPHostMACBridgePortEthFrameFilterTable | not-accessible | current | This managed entity provides an alternate approach to address filtering than that supported through MACBridgePortFilterTableData. This managed entity is associ… |
| 1.3.6.1.4.1.3902.1012.3.50.15.11.1 | RowzxGponIPHostMACBridgePortEthFrameFilterEntry | not-accessible | current | It is entry in the zxGponIPHostMACBridgePortEthFrameFilterTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.11.1.1 | ColumnzxGponIPHostMACBridgePortEthFrameFilterIPv4MCFilter | read-write | current | This attribute indicates whether IPv4Multicast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.11.1.2 | ColumnzxGponIPHostMACBridgePortEthFrameFilterIPv6MCFilter | read-write | current | This attribute indicates whether Ipv6Multicast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.11.1.3 | ColumnzxGponIPHostMACBridgePortEthFrameFilterIPv4BCFilter | read-write | current | This attribute indicates whether IPv4Broadcast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.11.1.4 | ColumnzxGponIPHostMACBridgePortEthFrameFilterRARPFilter | read-write | current | This attribute indicates whether RARP Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.11.1.5 | ColumnzxGponIPHostMACBridgePortEthFrameFilterIPXFilter | read-write | current | This attribute indicates whether IPX Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.11.1.6 | ColumnzxGponIPHostMACBridgePortEthFrameFilterNetBEUIFilter | read-write | current | This attribute indicates whether NetBEUI Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.11.1.7 | ColumnzxGponIPHostMACBridgePortEthFrameFilterAppleTalkFilter | read-write | current | This attribute indicates whether AppleTalk Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.11.1.8 | ColumnzxGponIPHostMACBridgePortEthFrameFilterBPDUFilter | read-write | current | This attribute indicates whether BridgeManagementInformation Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.11.1.9 | ColumnzxGponIPHostMACBridgePortEthFrameFilterARPFilter | read-write | current | This attribute indicates whether ARP Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.11.1.10 | ColumnzxGponIPHostMACBridgePortEthFrameFilterPPPoEFilter | read-write | current | This attribute indicates whether PPPoE Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.12 | TablezxGponFlowEthFrameFilterTable | not-accessible | current | This managed entity provides an alternate approach to address filtering than that supported through MACBridgePortFilterTableData. This managed entity is associ… |
| 1.3.6.1.4.1.3902.1012.3.50.15.12.1 | RowzxGponFlowEthFrameFilterEntry | not-accessible | current | It is entry in the zxGponFlowEthFrameFilterTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.12.1.1 | ColumnzxGponFlowEthFrameFilterIPv4MCFilter | read-write | current | This attribute indicates whether IPv4Multicast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.12.1.2 | ColumnzxGponFlowEthFrameFilterIPv6MCFilter | read-write | current | This attribute indicates whether Ipv6Multicast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.12.1.3 | ColumnzxGponFlowEthFrameFilterIPv4BCFilter | read-write | current | This attribute indicates whether IPv4Broadcast Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.12.1.4 | ColumnzxGponFlowEthFrameFilterRARPFilter | read-write | current | This attribute indicates whether RARP Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.12.1.5 | ColumnzxGponFlowEthFrameFilterIPXFilter | read-write | current | This attribute indicates whether IPX Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.12.1.6 | ColumnzxGponFlowEthFrameFilterNetBEUIFilter | read-write | current | This attribute indicates whether NetBEUI Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.12.1.7 | ColumnzxGponFlowEthFrameFilterAppleTalkFilter | read-write | current | This attribute indicates whether AppleTalk Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.12.1.8 | ColumnzxGponFlowEthFrameFilterBPDUFilter | read-write | current | This attribute indicates whether BridgeManagementInformation Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.12.1.9 | ColumnzxGponFlowEthFrameFilterARPFilter | read-write | current | This attribute indicates whether ARP Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.12.1.10 | ColumnzxGponFlowEthFrameFilterPPPoEFilter | read-write | current | This attribute indicates whether PPPoE Ether types are forwarded (value 0x00) or filtered (value 0x01). Initial value is 0x00.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.13 | TablezxGponUNIVLANTagFilterModeTable | not-accessible | current | This managed entity is used to organize data associated with VLAN tagging. Instances of this managed entity are created/deleted at the request of the OLT. Zero… |
| 1.3.6.1.4.1.3902.1012.3.50.15.13.1 | RowzxGponUNIVLANTagFilterModeEntry | not-accessible | current | It is entry in the zxGponUNIVLANTagFilterModeTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.13.1.1 | ColumnzxGponUNIVLANTagFilterModeForwardOper | read-write | current | When a frame is received, the frame is processed according to the following Forward Operations. The operations are invoked based on the value of VID, user prio… |
| 1.3.6.1.4.1.3902.1012.3.50.15.13.1.2 | ColumnzxGponUNIVLANTagFilterModeEntryStatus | read-write | current | This attribute provides the number of entries in the VLAN Filter Table that are valid.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.14 | TablezxGponUNIVLANTagFilterTable | not-accessible | current | This managed entity is used to organize data associated with VLAN tagging. Instances of this managed entity are created/deleted at the request of the OLT. Zero… |
| 1.3.6.1.4.1.3902.1012.3.50.15.14.1 | RowzxGponUNIVLANTagFilterEntry | not-accessible | current | It is entry in the zxGponUNIVLANTagFilterTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.14.1.1 | ColumnzxGponUNIVLANTagFilterTCI | read-write | current | This attribute specifies the TCI value which is provisioned at a bridging port.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.14.1.2 | ColumnzxGponUNIVLANTagFilterEntryStatus | read-write | current | This attribute provides the number of entries in the VLAN Filter Table that are valid.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.15 | TablezxGponIPHostVLANTagFilterModeTable | not-accessible | current | This managed entity is used to organize data associated with VLAN tagging. Instances of this managed entity are created/deleted at the request of the OLT. Zero… |
| 1.3.6.1.4.1.3902.1012.3.50.15.15.1 | RowzxGponIPHostVLANTagFilterModeEntry | not-accessible | current | It is entry in the zxGponIPHostVLANTagFilterModeTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.15.1.1 | ColumnzxGponIPHostVLANTagFilterModeForwardOper | read-write | current | When a frame is received, the frame is processed according to the following Forward Operations. The operations are invoked based on the value of VID, user prio… |
| 1.3.6.1.4.1.3902.1012.3.50.15.15.1.2 | ColumnzxGponIPHostVLANTagFilterModeEntryStatus | read-write | current | This attribute provides the number of entries in the VLAN Filter Table that are valid.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.16 | TablezxGponIPHostVLANTagFilterTable | not-accessible | current | This managed entity is used to organize data associated with VLAN tagging. Instances of this managed entity are created/deleted at the request of the OLT. Zero… |
| 1.3.6.1.4.1.3902.1012.3.50.15.16.1 | RowzxGponIPHostVLANTagFilterEntry | not-accessible | current | It is entry in the zxGponIPHostVLANTagFilterTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.16.1.1 | ColumnzxGponIPHostVLANTagFilterTCI | read-write | current | This attribute specifies the TCI value which is provisioned at a bridging port.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.16.1.2 | ColumnzxGponIPHostVLANTagFilterEntryStatus | read-write | current | This attribute provides the number of entries in the VLAN Filter Table that are valid.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.15.17 | TablezxGponVLANTagOperConfigTable | not-accessible | current | This managed entity is used to organize data associated with VLAN tagging. Instances of this managed entity are created/deleted at the request of the OLT. Zero… |
| 1.3.6.1.4.1.3902.1012.3.50.15.17.1 | RowzxGponVLANTagOperConfigEntry | not-accessible | current | It is entry in the zxGponVLANTagOperConfigTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.17.1.1 | ColumnzxGponVLANTagOperConfigUpTagOperMode | read-write | current | This attribute selects how upstream VLAN tagging is sent. Valid values are: 0x01 (upstream frame is sent 'as is,' regardless of whether or not the received fra… |
| 1.3.6.1.4.1.3902.1012.3.50.15.17.1.2 | ColumnzxGponVLANTagOperConfigUpTagTCIVal | read-write | current | This attribute indicates the TCI value for upstream VLAN tagging. It is used when the Upstream VLAN Tagging Operation Mode is 0x02, 0x03, or 0x04. Any 2-byte v… |
| 1.3.6.1.4.1.3902.1012.3.50.15.17.1.3 | ColumnzxGponVLANTagOperConfigDownTagOperMode | read-write | current | This attribute selects whether or not downstream VLAN tagging is sent. Valid values are as follows: 0x01 (downstream frame is sent 'as is', regardless of wheth… |
| 1.3.6.1.4.1.3902.1012.3.50.15.17.1.4 | ColumnzxGponVLANTagOperConfigEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.15.18 | TablezxGponIPHostVLANTagOperConfigTable | not-accessible | current | This managed entity is used to organize data associated with VLAN tagging. Instances of this managed entity are created/deleted at the request of the OLT. Zero… |
| 1.3.6.1.4.1.3902.1012.3.50.15.18.1 | RowzxGponIPHostVLANTagOperConfigEntry | not-accessible | current | It is entry in the zxGponIPHostVLANTagOperConfigTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.18.1.1 | ColumnzxGponIPHostVLANTagOperConfigUpTagOperMode | read-write | current | This attribute selects how upstream VLAN tagging is sent. Valid values are: 0x00 (upstream frame is sent 'as is,' regardless of whether or not the received fra… |
| 1.3.6.1.4.1.3902.1012.3.50.15.18.1.2 | ColumnzxGponIPHostVLANTagOperConfigUpTagTCIVal | read-write | current | This attribute indicates the TCI value for upstream VLAN tagging. It is used when the Upstream VLAN Tagging Operation Mode is 0x01. Any 2-byte value is accepta… |
| 1.3.6.1.4.1.3902.1012.3.50.15.18.1.3 | ColumnzxGponIPHostVLANTagOperConfigDownTagOperMode | read-write | current | This attribute selects whether or not downstream VLAN tagging is sent. Valid values are 0x00 (downstream frame is sent 'as is', regardless of whether or not th… |
| 1.3.6.1.4.1.3902.1012.3.50.15.18.1.4 | ColumnzxGponIPHostVLANTagOperConfigEntryStatus | read-write | current | This attribute selects whether or not downstream VLAN tagging is sent. Valid values are 0x00 (downstream frame is sent 'as is', regardless of whether or not th… |
| 1.3.6.1.4.1.3902.1012.3.50.15.19 | TablezxGponExVLANTagConfigTable | not-accessible | current | This managed entity organizes data associated with VLAN tagging. Regardless of its point of attachment, the specified tagging operations refer to the upstream … |
| 1.3.6.1.4.1.3902.1012.3.50.15.19.1 | RowzxGponExVLANTagConfigEntry | not-accessible | current | It is entry in the zxGponExVLANTagConfigTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.19.1.1 | ColumnzxGponExVlanIfType | not-accessible | current | This attribute indicates the type of interface. 1 eth uni bridge port 2 flow 3 IP host 4 eth uni 5 wifi 6 veip |
| 1.3.6.1.4.1.3902.1012.3.50.15.19.1.2 | ColumnzxGponExVlanIndex | not-accessible | current | This attribute indicates the type of interface. For eth UNI: The third byte specifies the slot Id associated with this UNI;the forth byte specifies the port Id… |
| 1.3.6.1.4.1.3902.1012.3.50.15.19.1.3 | ColumnzxGponExVLANTagConfigInputTPID | read-write | current | This attribute gives the special TPID value for operations on the input (filtering) side of the table. Typical values include 0x8a88 and 0x9100. (R, W) (mandat… |
| 1.3.6.1.4.1.3902.1012.3.50.15.19.1.4 | ColumnzxGponExVLANTagConfigOutputTPID | read-write | current | This attribute gives the special TPID value for operations on the output (tagging) side of the table. Typical values include 0x8a88 and 0x9100. (R, W) (mandato… |
| 1.3.6.1.4.1.3902.1012.3.50.15.19.1.5 | ColumnzxGponExVLANTagConfigDownStreamMode | read-write | current | Regardless of its association, the extended VLAN tagging operation configuration data ME pertains to upstream traffic. This attribute specifies the mode for do… |
| 1.3.6.1.4.1.3902.1012.3.50.15.19.1.6 | ColumnzxGponExVLANTagConfigEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.15.19.1.7 | ColumnzxGponExVLANTagDscp2CosProfile | read-write | current | This attribute specifies DSCP to P-bits mapping profile ID. |
| 1.3.6.1.4.1.3902.1012.3.50.15.20 | TablezxGponExVLANTableConfigTable | not-accessible | current | This managed entity organizes data associated with VLAN tagging. Regardless of its point of attachment, the specified tagging operations refer to the upstream … |
| 1.3.6.1.4.1.3902.1012.3.50.15.20.1 | RowzxGponExVLANTableConfigEntry | not-accessible | current | It is entry in the zxGponUniExVLANTableConfigTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.20.1.1 | ColumnzxGponExVlANTableConfigFilterId | read-write | current | This attribute provides a unique index of filter for this ExVLAN table. (R, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.20.1.2 | ColumnzxGponExVlANTableConfigTreatId | read-write | current | This attribute provides a unique index of treatment for this ExVLAN table. (R, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.20.1.3 | ColumnzxGponExVLANTableConfigEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.15.21 | TablezxGponUNITPInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.15.21.1 | RowzxGponUNITPInfoEntry | not-accessible | current | It is entry in the zxGponUNITPInfoTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.21.1.1 | ColumnzxGponUNITPType | read-only | current | This attribute indicates the TP type related with this UNI. null: no related services; iwtp: uni is directly connected with an iwtp; mciwtp: uni is directly co… |
| 1.3.6.1.4.1.3902.1012.3.50.15.22 | TablezxGponOntBridgeCapabilityTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.15.22.1 | RowzxGponOntBridgeCapabilityEntry | not-accessible | current | It is entry in the zxGponOntBridgeCapabilityTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.22.1.1 | ColumnzxGponOntBridgeCapabilityMaxBridgeNum | read-only | current | This attribute indicates the maximum bridge group num supported on this ONT. |
| 1.3.6.1.4.1.3902.1012.3.50.15.22.1.2 | ColumnzxGponOntBridgeCapabilityMaxFlowNumPerBridge | read-only | current | This attribute indicates the maximum flow num per bridge supported on this ONT. |
| 1.3.6.1.4.1.3902.1012.3.50.15.23 | TablezxGponFlowExDot1pMapServiceProfileTable | not-accessible | current | This managed entity is used to associate the priorities of 802.1P priority tagged frames of a certain flow with a specific connection. |
| 1.3.6.1.4.1.3902.1012.3.50.15.23.1 | RowzxGponFlowExDot1pMapServiceProfileEntry | not-accessible | current | It is entry in the zxGponFlowExDot1pMapServiceProfileTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.23.1.1 | ColumnzxGponFlowExDot1pMapServiceProfilePrio0QueueId | read-write | current | This attribute represents the upstream queue id that is associated with P-Bit = 000 tagged frames. The value 0x0000 is a null pointer.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.23.1.2 | ColumnzxGponFlowExDot1pMapServiceProfilePrio1QueueId | read-write | current | This attribute represents the upstream queue id that is associated with P-Bit = 001 tagged frames. The value 0x0000 is a null pointer.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.23.1.3 | ColumnzxGponFlowExDot1pMapServiceProfilePrio2QueueId | read-write | current | This attribute represents the upstream queue id that is associated with P-Bit = 010 tagged frames. The value 0x0000 is a null pointer.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.23.1.4 | ColumnzxGponFlowExDot1pMapServiceProfilePrio3QueueId | read-write | current | This attribute represents the upstream queue id that is associated with P-Bit = 011 tagged frames. The value 0x0000 is a null pointer.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.23.1.5 | ColumnzxGponFlowExDot1pMapServiceProfilePrio4QueueId | read-write | current | This attribute represents the upstream queue id that is associated with P-Bit = 100 tagged frames. The value 0x0000 is a null pointer.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.23.1.6 | ColumnzxGponFlowExDot1pMapServiceProfilePrio5QueueId | read-write | current | This attribute represents the upstream queue id that is associated with P-Bit = 101 tagged frames. The value 0x0000 is a null pointer.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.23.1.7 | ColumnzxGponFlowExDot1pMapServiceProfilePrio6QueueId | read-write | current | This attribute represents the upstream queue id that is associated with P-Bit = 110 tagged frames. The value 0x0000 is a null pointer.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.23.1.8 | ColumnzxGponFlowExDot1pMapServiceProfilePrio7QueueId | read-write | current | This attribute represents the upstream queue id that is associated with P-Bit = 111 tagged frames. The value 0x0000 is a null pointer.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.15.24 | TablezxGponMCastVlanTable | not-accessible | current | This managed entity is used to configure the vlan of multicast. |
| 1.3.6.1.4.1.3902.1012.3.50.15.24.1 | RowzxGponMCastVlanEntry | not-accessible | current | It is entry in the zxGponMCastVlanTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.24.1.1 | ColumnzxGponMCastVlanId | not-accessible | current | This attribute represents the vlan id(1~4094) as the index. |
| 1.3.6.1.4.1.3902.1012.3.50.15.24.1.2 | ColumnzxGponMCastVlanEntryStatus | read-write | current | This attribute represents the operation of the entry. |
| 1.3.6.1.4.1.3902.1012.3.50.15.25 | TablezxGponMCastAddrTable | not-accessible | current | This managed entity is used to configure the address of multicast. |
| 1.3.6.1.4.1.3902.1012.3.50.15.25.1 | RowzxGponMCastAddrEntry | not-accessible | current | It is entry in the zxGponMCastAddrTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.25.1.1 | ColumnzxGponMCastAddr | not-accessible | current | This attribute represents the address(01:00:5e:00:00:00~01:00:5e:7f:ff:ff) as the index. |
| 1.3.6.1.4.1.3902.1012.3.50.15.25.1.2 | ColumnzxGponMCastAddrEntryStatus | read-write | current | This attribute represents the operation of the entry. |
| 1.3.6.1.4.1.3902.1012.3.50.15.26 | TablezxGponTrafficSchedulerUNITable | not-accessible | current | This managed entity is used to configure the Traffic Scheduler of ETHUNI. |
| 1.3.6.1.4.1.3902.1012.3.50.15.26.1 | RowzxGponTrafficSchedulerUNIEntry | not-accessible | current | It is entry in the zxGponTrafficSchedulerUNITable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.26.1.1 | ColumnzxGponTrafficSchedulerUNIProfilePtr | read-write | current | This attribute refers to the Traffic Scheduler Profile related with this UNI. |
| 1.3.6.1.4.1.3902.1012.3.50.15.27 | TablezxGponCfmMepTable | not-accessible | current | This managed entity is used to configure the Y.1731 CFM MEP. |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1 | RowzxGponCfmMepEntry | not-accessible | current | It is entry in the zxGponCfmMepTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1.1 | ColumnzxGponCfmMepMEPID | read-write | current | This attribute specifies the MEP's own identity in the MA. For a given MA, the MEP ID must be unique throughout the network defined by the MD. The MEP ID is de… |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1.2 | ColumnzxGponCfmMepMDName | read-write | current | This attribute specifies the name of MD which MEP belongs to. |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1.3 | ColumnzxGponCfmMepMDLevel | read-write | current | This attribute ranges from 0..7 and specifies the maintenance level of this MD. Higher numbers have wider geographic scope. |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1.4 | ColumnzxGponCfmMepMAName | read-write | current | This attribute specifies the name of MA which MEP belongs to. |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1.5 | ColumnzxGponCfmMepMACCMInterval | read-write | current | If CCMs are enabled on a MEP, the CCM interval attribute specifies the rate at which they are generated. The MEP also expects to receive CCMs from each of the … |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1.6 | ColumnzxGponCfmMepMAAssociatedVLAN | read-write | current | This attribute is a list of up to 12 VLAN IDs with which this MA is associated. Once a set of VLANs is defined, the ONT should deny operations to other dot1ag … |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1.7 | ColumnzxGponCfmMepCCMEnable | read-write | current | MEP generates continuity check messages, CCMs |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1.8 | ColumnzxGponCfmMepServerFuncEnable | read-write | current | Enable Y.1731 server MEP function |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1.9 | ColumnzxGponCfmMepAISEnable | read-write | current | Enable generation of Ethernet AIS |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1.10 | ColumnzxGponCfmMepDirection | read-write | current | An up MEP will face toward the core of the bridge. If more than one MEP exists on a given maintenance association and on a given bridge, all such MEPs must fac… |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1.11 | ColumnzxGponCfmMepAdminState | read-write | current | This attribute locks (1) and unlocks (0) the functions performed by this managed entity. When the administrative state is set to lock, all functions are blocke… |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1.12 | ColumnzxGponCfmMepPriority | read-write | current | By default, CCM and LTM frames are transmitted with the highest Ethernet priority available. Ranging from 0..7, this attribute permits these frames to be expli… |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1.13 | ColumnzxGponCfmMepPeerMEPID | read-write | current | Peer MEP ID. |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1.14 | ColumnzxGponCfmMepPeerMEPMAC | read-write | current | Peer MEP ID. |
| 1.3.6.1.4.1.3902.1012.3.50.15.27.1.15 | ColumnzxGponCfmMepEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.15.28 | TablezxGponBridgePortAddrListTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.15.28.1 | RowzxGponBridgePortAddrListEntry | not-accessible | current | It is entry in the zxGponBridgePortAddrListTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.28.1.1 | ColumnzxGponBridgePortAddrListIndex | not-accessible | current | Index for getnext. |
| 1.3.6.1.4.1.3902.1012.3.50.15.28.1.2 | ColumnzxGponBridgePortAddrListTotalNum | read-only | current | Total number of addresses entries related with this port. |
| 1.3.6.1.4.1.3902.1012.3.50.15.28.1.3 | ColumnzxGponBridgePortAddrListCurrentNum | read-only | current | The number of addresses entries by current getnext. |
| 1.3.6.1.4.1.3902.1012.3.50.15.28.1.4 | ColumnzxGponBridgePortAddrListData | read-only | current | This attribute identifies the MAC addresses learned by this bridge port. The first N*8 bytes is valid, N is determined by zxGponBridgePortAddrListCurrentNum. E… |
| 1.3.6.1.4.1.3902.1012.3.50.15.29 | TablezxGponUniIgmpCfgTable | not-accessible | current | This managed entity organizes data associated with multicast management at subscriber ports of 802.1 bridges, including 802.1p mappers when the provisioning mo… |
| 1.3.6.1.4.1.3902.1012.3.50.15.29.1 | RowzxGponUniIgmpCfgEntry | not-accessible | current | It is entry in the zxGponUNIIgmpCfgTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.29.1.1 | ColumnzxGponUniIgmpProfileId | read-create | current | This attribute points to an instance of the multicast operations profile. |
| 1.3.6.1.4.1.3902.1012.3.50.15.29.1.2 | ColumnzxGponUniIgmpMaxGroups | read-create | current | This attribute specifies the maximum number of dynamic multicast groups that may be replicated to the client port at any one time. The default value 0 specifie… |
| 1.3.6.1.4.1.3902.1012.3.50.15.29.1.3 | ColumnzxGponUniIgmpMaxBandwidth | read-create | current | This attribute specifies the maximum imputed dynamic bandwidth, in kb per second, that may be delivered to the client port at any one time. The default value 0… |
| 1.3.6.1.4.1.3902.1012.3.50.15.29.1.4 | ColumnzxGponUniIgmpBandwidthEnforce | read-create | current | The default value of this boolean attribute is false, and specifies that attempts to exceed the max multicast bandwidth be counted but honored. The value true … |
| 1.3.6.1.4.1.3902.1012.3.50.15.29.1.31 | ColumnzxGponUniIgmpCfgRowStatus | read-create | current | This attribute provides the number of entries in the IGMP Config Table that are valid. |
| 1.3.6.1.4.1.3902.1012.3.50.15.30 | TablezxGponUniMVlanTagCfgTable | not-accessible | current | This managed entity organizes data associated with multicast management at uni ports of onu. |
| 1.3.6.1.4.1.3902.1012.3.50.15.30.1 | RowzxGponUniMVlanTagCfgEntry | not-accessible | current | It is entry in the zxGponUniMVlanTagCfgTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.30.1.1 | ColumnzxGponUniMVlanTagMode | read-write | current | This attribute specifies the multicast VLAN tag mode. |
| 1.3.6.1.4.1.3902.1012.3.50.15.31 | TablezxGponUniIgmpMonitorTable | not-accessible | current | This managed entity provides the current status of each port with respect to its multicast subscriptions. It may be useful for status monitoring or debugging p… |
| 1.3.6.1.4.1.3902.1012.3.50.15.31.1 | RowzxGponUniIgmpMonitorEntry | not-accessible | current | It is entry in the zxGponUniIgmpMonitorTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.31.1.1 | ColumnzxGponUniIgmpMonitorCurrBw | read-only | current | This attribute is the ONT's best effort estimate of the actual bandwidth currently being delivered over all dynamic multicast groups. |
| 1.3.6.1.4.1.3902.1012.3.50.15.31.1.2 | ColumnzxGponUniIgmpMonitorJoinCnt | read-only | current | This attribute counts the number of times the corresponding subscriber sent a join message that was accepted. When full, the counter rolls over to 0. |
| 1.3.6.1.4.1.3902.1012.3.50.15.31.1.3 | ColumnzxGponUniIgmpMonitorExceededCnt | read-only | current | This attribute counts the number of join messages that did, or would have, exceeded the max multicast bandwidth, whether accepted or denied. When full, the cou… |
| 1.3.6.1.4.1.3902.1012.3.50.15.31.1.31 | ColumnzxGponUniIgmpMonitorRowStatus | read-create | current | rowstatus |
| 1.3.6.1.4.1.3902.1012.3.50.15.32 | TablezxGponUniIgmpDynGroupTable | not-accessible | current | This table lists the groups from the dynamic access control list that are currently being actively forwarded, along with the actual bandwidth of each. The inde… |
| 1.3.6.1.4.1.3902.1012.3.50.15.32.1 | RowzxGponUniIgmpDynGroupEntry | not-accessible | current | It is entry in the zxGponUniIgmpDynGroupTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.32.1.1 | ColumnzxGponUniIgmpDynGroupIndex | not-accessible | current | Index of IGMP dynamic group. |
| 1.3.6.1.4.1.3902.1012.3.50.15.32.1.2 | ColumnzxGponUniIgmpDynGroupTotalNum | read-only | current | Total number of group entries related with this port. |
| 1.3.6.1.4.1.3902.1012.3.50.15.32.1.3 | ColumnzxGponUniIgmpDynGroupData | read-only | current | This attribute identifies the dynamic group that is currently being actively forwarded.Each 24 bytes contain: - VLAN ID, 0 if not used (2 bytes) - Source IP ad… |
| 1.3.6.1.4.1.3902.1012.3.50.15.33 | TablezxAnGponUniMVlanTranslateTable | not-accessible | current | A table entry containing ONU UNI multicast VLAN translation information. |
| 1.3.6.1.4.1.3902.1012.3.50.15.33.1 | RowzxAnGponUniMVlanTranslateEntry | not-accessible | current | GPON ONU multicast VLAN translation entry. |
| 1.3.6.1.4.1.3902.1012.3.50.15.33.1.1 | ColumnzxAnGponUniMVlan | not-accessible | current | Multicast VLAN. |
| 1.3.6.1.4.1.3902.1012.3.50.15.33.1.2 | ColumnzxAnGponUniTranslatedMVlan | read-create | current | Translated multicast VLAN. |
| 1.3.6.1.4.1.3902.1012.3.50.15.33.1.20 | ColumnzxAnGponUniMVlanTransRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100 | NodezxGponExtendedVlanMgmtObject | |||
| 1.3.6.1.4.1.3902.1012.3.50.15.100.1 | TablezxGponVlanPortTable | not-accessible | current | A table containing VLAN Port information for VLANs configured into the bridge by (local or network) management, specifying the set of ports to which frames rec… |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.1.1 | RowzxGponVlanPortEntry | not-accessible | current | Filtering information configured into the bridge by management, specifying the set of ports to which frames received on a VLAN and containing a specific Group … |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.1.1.1 | ColumnzxGponVlanPortType | not-accessible | current | This attribute indicates the type of port. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.1.1.2 | ColumnzxGponVlanPortIndex | not-accessible | current | This attribute indicates the port index. For ETH UNI: The third byte specifies the slot ID associated with this UNI; the forth byte specifies the port ID assoc… |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.1.1.3 | ColumnzxGponVlanPortMode | read-write | current | the access mode of the port. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.1.1.4 | ColumnzxGponVlanPortPvid | read-write | current | the pvid of the port. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.1.1.5 | ColumnzxGponVlanPortDefaultPriority | read-write | current | the default priority of the port. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.1.1.6 | ColumnzxGponVlanPortUntaggedVlanList | read-only | current | The Untagged vlan sequence to a Port. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.1.1.7 | ColumnzxGponVlanPortTaggedVlanList | read-only | current | The Tagged vlan sequence to a Port. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.2 | TablezxGponVlanPortConfVlanCmdTable | not-accessible | current | Operation command table for bridge port configuration like Vlan list. A single object such as pkg and channel will be added or removed to/from PkgIdList/ChanId… |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.2.1 | RowzxGponVlanPortConfVlanCmdEntry | not-accessible | current | A list of entries of zxGponVlanPortConfVlanCmdTable. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.2.1.1 | ColumnzxGponVlanPortConfVlanCmd | read-write | current | The command to operate Vlan list of zxGponVlanPortConfTable. Each command is related to each meaming of zxGponVlanPortConfVlanObjName. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.2.1.2 | ColumnzxGponVlanPortConfVlanId | read-write | current | The value of object name in Vlan list,eg. pkgName,chanName Different command has different operated Vlan list,so this object has different meanings.please see … |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.3 | TablezxGponVlanTranslateTable | not-accessible | current | A table containing VLAN translate information for VLANs configured into the bridge by (local or network) management. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.3.1 | RowzxGponVlanTranslateEntry | not-accessible | current | VLAN Translate information for VLANs configured into the bridge by (local or network) management. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.3.1.1 | ColumnzxGponVlanTranslateVlanId | not-accessible | current | VlanId for Vlan translate. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.3.1.2 | ColumnzxGponVlanTranslatePriority | not-accessible | current | Priority for Vlan translate,the scope of priority is from 0 to 8 and '8' indicates no configuration. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.3.1.3 | ColumnzxGponVlanTranslateCVlanId | read-write | current | Inner VLAN for Vlan translate,'0' indicates no translation. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.3.1.4 | ColumnzxGponVlanTranslateCVlanPriority | read-write | current | Inner VLAN priority for Vlan translate,'8' indicates no translation. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.3.1.5 | ColumnzxGponVlanTranslateSVlanId | read-write | current | Outer VLAN for Vlan translate,'0' indicates no SVLAN. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.3.1.6 | ColumnzxGponVlanTranslateSVlanPriority | read-write | current | Outer VLAN priority for Vlan translate,'8' indicates copy priority from inner VLAN priority. |
| 1.3.6.1.4.1.3902.1012.3.50.15.100.3.1.7 | ColumnzxGponVlanTranslateRowStatus | read-write | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.16 | NodezxGponRmL3Mgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.16.1 | TablezxGponIPHostConfigDataTable | not-accessible | current | The IP Host Config Data contains the configuration for IP based services that are offered on the ONT. This entity is conditionally required for ONTs that offer… |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1 | RowzxGponIPHostConfigDataEntry | not-accessible | current | It is entry in the zxGponIPHostConfigDataTable. |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.1 | ColumnzxGponIPHostConfigDataId | read-only | current | This attribute provides a unique number for each instance of this managed entity. The ONT creates as many instances as there are independent IP stacks on the O… |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.2 | ColumnzxGponIPHostConfigDataIPOptions | read-write | current | This attribute is a bitfield that is used to enable or disable IP related options. A bit value of 1 enables the option and a bit value of 0 disables the option… |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.3 | ColumnzxGponIPHostConfigDataMACAddress | read-only | current | This attribute indicates the MAC address used by the IP Node (R) (mandatory) (6 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.4 | ColumnzxGponIPHostConfigDataOntIdentifier | read-write | current | A unique ONT identifier string. This string, if set is provided as part of the DHCP request to allow an alternative to MAC Address in retrieving the DHCP param… |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.5 | ColumnzxGponIPHostConfigDataIPAddress | read-write | current | Address used for all IP services hosted by the ONT, and has a default value of 0x0 [not set]. If this value is set, it will override any values returned in DHC… |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.6 | ColumnzxGponIPHostConfigDataIPMask | read-write | current | Subnet mask for the IP services hosted by the ONT, and has a default value of 0x0 [not set]. If this value is set, it will override any values returned in DHCP… |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.7 | ColumnzxGponIPHostConfigDataGateway | read-write | current | Default Gateway Address used for all IP services hosted by the ONT, and has a default value of 0x0 [not set]. If this value is set, it will override any values… |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.8 | ColumnzxGponIPHostConfigDataPrimaryDNS | read-write | current | Address used for the Primary DNS server for the IP service, and has a default value of 0x0 [not set]. If this value is set, it will override any values returne… |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.9 | ColumnzxGponIPHostConfigDataSecondaryDNS | read-write | current | Address used for the Secondary DNS server for the IP service, and has a default value of 0x0 [not set]. If this value is set, it will override any values retur… |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.10 | ColumnzxGponIPHostConfigDataCurrentAddress | read-only | current | Current address for the IP service hosted by the ONT. This attribute is updated by the ONT if a new address is assigned by DHCP. (R) (optional) (4 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.11 | ColumnzxGponIPHostConfigDataCurrentMask | read-only | current | Current subnet mask for the IP service. This attribute is updated by the ONT if a new mask is assigned by DHCP. (R) (optional) (4 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.12 | ColumnzxGponIPHostConfigDataCurrentGateway | read-only | current | Current default Gateway Address for the IP service. This attribute is updated by the ONT if a new gateway is assigned by DHCP. (R) (optional) (4 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.13 | ColumnzxGponIPHostConfigDataCurrentPriDNS | read-only | current | Current address used for the Primary DNS server for the IP service. This attribute is updated by the ONT if a new address is assigned by DHCP. (R) (optional) (… |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.14 | ColumnzxGponIPHostConfigDataCurrentSecDNS | read-only | current | Current address used for the Secondary DNS server for the IP service. This attribute is updated by the ONT if a new address is assigned by DHCP. (R) (optional)… |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.15 | ColumnzxGponIPHostConfigDataDomainName | read-only | current | If domain name is indicated by DHCP, it is presented here. If domain name is not indicated, this attribute is set to an empty string. The string may be up to 2… |
| 1.3.6.1.4.1.3902.1012.3.50.16.1.1.16 | ColumnzxGponIPHostConfigDataHostName | read-only | current | If host name is indicated by DHCP, it is presented here. If host name is not indicated, this attribute is set to an empty string. The string may be up to 25 by… |
| 1.3.6.1.4.1.3902.1012.3.50.16.2 | TablezxGponPPPoEConfigDataTable | not-accessible | current | The Extend IP host config data configures IP based services in pppoe mode offered on the ONT. |
| 1.3.6.1.4.1.3902.1012.3.50.16.2.1 | RowzxGponPPPoEConfigDataEntry | not-accessible | current | It is entry in the zxGponPPPoEConfigDataTable. |
| 1.3.6.1.4.1.3902.1012.3.50.16.2.1.1 | ColumnzxGponPPPoEConfigDataNATEnable | read-write | current | This Boolean attribute indicates whether NAT is enabled(true) or not (false), The default value is false. |
| 1.3.6.1.4.1.3902.1012.3.50.16.2.1.2 | ColumnzxGponPPPoEConfigDataMode | read-write | current | This attribute specifies the PPPOE mode for the onu. Valid values include: 1:AUTO;(default value) 2:CHAP;(Challenge Handshake Authentication Protocol) 3:PAP;(P… |
| 1.3.6.1.4.1.3902.1012.3.50.16.2.1.3 | ColumnzxGponPPPoEConfigDataConnectTrigger | read-write | current | This attribute specifies the connection trigger for the pppoe wan. Valid values include: 1:Always(default value) 2:On Demand 3:Manual |
| 1.3.6.1.4.1.3902.1012.3.50.16.2.1.4 | ColumnzxGponPPPoEConfigDataReleaseTimer | read-write | current | This attribute contains a release timer defined in seconds. The value 0 specifies that the ONT is to use its internal default. The default value of this attrib… |
| 1.3.6.1.4.1.3902.1012.3.50.16.2.1.5 | ColumnzxGponPPPoEConfigDataUsername | read-write | current | This string attribute is the user name. If the string is shorter than 25 bytes,it must be null terminated. |
| 1.3.6.1.4.1.3902.1012.3.50.16.2.1.6 | ColumnzxGponPPPoEConfigDataPassword | read-write | current | This string attribute is the password. If the string is shorter than 25 bytes,it must be null terminated. |
| 1.3.6.1.4.1.3902.1012.3.50.16.2.1.7 | ColumnzxGponPPPoEConfigDataStatus | read-only | current | Status of the pppoe wan. |
| 1.3.6.1.4.1.3902.1012.3.50.16.2.1.8 | ColumnzxGponPPPoEConfigDataOnlineDuration | read-only | current | This attribute reports the time in second that wan is online. |
| 1.3.6.1.4.1.3902.1012.3.50.16.2.1.9 | ColumnzxGponPPPoEConfigDataEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.16.3 | TablezxGponIpStaticRouteTable | not-accessible | current | This table contains information of ONU IP static routes configuration. This managed entity stores IP static routes. |
| 1.3.6.1.4.1.3902.1012.3.50.16.3.1 | RowzxGponIpStaticRouteEntry | not-accessible | current | It is entry in the zxGponIpStaticRouteTable. |
| 1.3.6.1.4.1.3902.1012.3.50.16.3.1.1 | ColumnzxGponIpStaticRouteDestType | not-accessible | current | The type of the zxGponIpStaticRouteDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are all… |
| 1.3.6.1.4.1.3902.1012.3.50.16.3.1.2 | ColumnzxGponIpStaticRouteDest | not-accessible | current | The destination IP address of this route. The type of this address is determined by the value of the zxGponIpStaticRouteDestType object. The values for the ind… |
| 1.3.6.1.4.1.3902.1012.3.50.16.3.1.3 | ColumnzxGponIpStaticRoutePfxLen | not-accessible | current | Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the zxGponIp… |
| 1.3.6.1.4.1.3902.1012.3.50.16.3.1.4 | ColumnzxGponIpStaticRouteNextHopType | read-create | current | The type of the zxGponIpStaticRouteNextHopType address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those … |
| 1.3.6.1.4.1.3902.1012.3.50.16.3.1.5 | ColumnzxGponIpStaticRouteNextHop | read-create | current | On remote routes, the address of the next system route. For non-remote routes, a zero length string. The type of this address is determined by the value of the… |
| 1.3.6.1.4.1.3902.1012.3.50.16.3.1.6 | ColumnzxGponIpStaticRouteOutputPort | read-create | current | The number of the IP port through which the next hop should be reached. This field is used when the next hop is reached through an unnumbered link and when a s… |
| 1.3.6.1.4.1.3902.1012.3.50.16.3.1.50 | ColumnzxGponIpStaticRouteRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot b… |
| 1.3.6.1.4.1.3902.1012.3.50.16.4 | TablezxGponRmWanIpConfTable | not-accessible | current | WAN IP configuration table. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1 | RowzxGponRmWanIpConfEntry | not-accessible | current | WAN IP configuration entry. Entries in the zxGponRmWanIpConfTable are created and deleted using the zxGponRmWanIpConfRowStatus object. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.1 | ColumnzxGponRmWanId | not-accessible | current | This attribute refers to the ID of WAN IP. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.2 | ColumnzxGponRmWanIpMode | read-create | current | IP address configuration mode. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.3 | ColumnzxGponRmWanIpPrf | read-create | current | This attribute refers to the name of table 'zxGponVoipIpProfileTable'. If no profile name is indicated, this attribute is set to an null string. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.4 | ColumnzxGponRmWanVlanPrf | read-create | current | This attribute refers to the name of table 'zxGponVoipVlanProfileTable'. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.5 | ColumnzxGponRmWanHostId | read-create | current | The ONU IP host ID, if this attribute is not specified, system will select an available IP host ID. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.6 | ColumnzxGponRmWanOnuIdentifier | read-create | current | This attribute is related to 'zxGponRmWanIpMode'. This attribute is valid only when 'zxGponRmWanIpMode' is DHCP. A unique ONU identifier string. If set to a no… |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.7 | ColumnzxGponRmWanIpAddrType | read-create | current | The type of IP address denoted in zxGponRmWanIpAddr object. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.8 | ColumnzxGponRmWanIpAddr | read-create | current | This attribute is related to 'zxGponRmWanIpMode'. This attribute is valid only when 'zxGponRmWanIpMode' is static. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.9 | ColumnzxGponRmWanIpAddrPfxLen | read-create | current | WAN IP address prefix length. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.10 | ColumnzxGponRmWanPppoeAuthMode | read-create | current | This attribute is related to 'zxGponRmWanIpMode'. This attribute is valid only when 'zxGponRmWanIpMode' is PPPoE. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.11 | ColumnzxGponRmWanPppoeUserName | read-create | current | This attribute is related to 'zxGponRmWanIpMode'. This attribute is valid only when 'zxGponRmWanIpMode' is PPPoE. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.12 | ColumnzxGponRmWanPppoePassword | read-create | current | This attribute is related to 'zxGponRmWanIpMode'. This attribute is valid only when 'zxGponRmWanIpMode' is PPPoE. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.13 | ColumnzxGponRmWanCurrIpAddrType | read-only | current | The type of IP address denoted in 'zxGponRmWanCurrIpAddr' object. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.14 | ColumnzxGponRmWanCurrIpAddr | read-only | current | The current IP address. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.15 | ColumnzxGponRmWanCurrIpAddrPfxLen | read-only | current | The current IP address prefix length. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.16 | ColumnzxGponRmWanCurrGatewayType | read-only | current | The type of IP address denoted in 'zxGponRmWanCurrGateway' object. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.17 | ColumnzxGponRmWanCurrGateway | read-only | current | The current gateway. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.18 | ColumnzxGponRmWanCurrPriDnsType | read-only | current | The type of IP address denoted in 'zxGponRmWanCurrPriDns' object. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.19 | ColumnzxGponRmWanCurrPriDns | read-only | current | The current primary DNS. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.20 | ColumnzxGponRmWanCurrSecDnsType | read-only | current | The type of IP address denoted in zxGponRmWanCurrSecDns object. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.21 | ColumnzxGponRmWanCurrSecDns | read-only | current | The current second DNS. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.22 | ColumnzxGponRmWanDomainName | read-only | current | If DHCP indicates a domain name, it is presented here. If no domain name is indicated, this attribute is set to a null string. If the string is shorter than 25… |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.23 | ColumnzxGponRmWanHostName | read-only | current | If DHCP indicates a host name, it is presented here. If no host name is indicated, this attribute is set to a null string.If the string is shorter than 25 byte… |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.24 | ColumnzxGponRmWanMacAddr | read-only | current | This attribute indicates the MAC address used by the IP node. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.25 | ColumnzxGponRmWanRspPing | read-create | current | This attribute indicates whether respond to pings enabled. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.26 | ColumnzxGponRmWanRspTraceRoute | read-create | current | This attribute indicates whether respond to trace route enabled. |
| 1.3.6.1.4.1.3902.1012.3.50.16.4.1.50 | ColumnzxGponRmWanIpConfRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1012.3.50.17 | NodezxGponRmVoiceMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.17.1 | TablezxGponPptpPOTSUNITable | not-accessible | current | This managed entity represents the point at the POTS UNI in the ONT where physical paths terminate and physical path level functions (e.g., analog telephony, f… |
| 1.3.6.1.4.1.3902.1012.3.50.17.1.1 | RowzxGponPptpPOTSUNIEntry | not-accessible | current | It is entry in the zxGponPptpPOTSUNITable. |
| 1.3.6.1.4.1.3902.1012.3.50.17.1.1.1 | ColumnzxGponPptpPOTSUNIAdminState | read-write | current | This attribute is used to activate (unlock: value 0x00) and deactivate (lock: value 0x01) the functions performed by instances of this managed entity.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.17.1.1.2 | ColumnzxGponPptpPOTSUNIIwVCCPtr | read-only | current | This attribute provides a pointer to the instance of the Interworking VCC managed entity to which this instance is connected. The value 0x0000 is interpreted a… |
| 1.3.6.1.4.1.3902.1012.3.50.17.1.1.3 | ColumnzxGponPptpPOTSUNIARC | read-write | current | This attribute is used to control alarm reporting from this managed entity. See I.1.8 for a complete description.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.17.1.1.4 | ColumnzxGponPptpPOTSUNIARCInterval | read-write | current | This attribute provides a provisionable length of time. See I.1.8 for a complete description.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.17.1.1.5 | ColumnzxGponPptpPOTSUNIImpedance | read-write | current | This attribute allows the impedance for the Physical Path Termination Point POTS UNI to be configured by the user. Valid values include 600 Ohm Impedance (valu… |
| 1.3.6.1.4.1.3902.1012.3.50.17.1.1.6 | ColumnzxGponPptpPOTSUNITxPath | read-write | current | This attribute allows for setting the Physical Path Termination Point POTS UNI to be put in either full-time or part-time on-hook transmission mode. Valid valu… |
| 1.3.6.1.4.1.3902.1012.3.50.17.1.1.7 | ColumnzxGponPptpPOTSUNIRxGain | read-write | current | This attribute provides a gain value for the received signal. Valid values are -12 dB to +6 dB in 0.1 dB increments. (value -120 to +60, 0 = 0 dB gain, -120 = … |
| 1.3.6.1.4.1.3902.1012.3.50.17.1.1.8 | ColumnzxGponPptpPOTSUNITxGain | read-write | current | This attribute provides a gain value for the transmit signal. Valid values are -6 dB to +12 dB in 0.1 dB increments. (value -60 to +120, 0 = 0 dB gain, 60 = +6… |
| 1.3.6.1.4.1.3902.1012.3.50.17.1.1.9 | ColumnzxGponPptpPOTSUNIOperState | read-only | current | This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive … |
| 1.3.6.1.4.1.3902.1012.3.50.17.1.1.10 | ColumnzxGponPptpPOTSUNIHookState | read-only | current | This attribute indicates the state of the subscriber line: 0x00 = on hook, 0x01 = off hook.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.17.2 | TablezxGponVoIPConfigDataTable | not-accessible | current | The VoIP Configuration Data defines the configuration for VoIP in the ONT. The OLT uses this ME to discover the VoIP signaling protocols and configuration meth… |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1 | RowzxGponVoIPConfigDataEntry | not-accessible | current | It is entry in the zxGponVoIPConfigDataTable. |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.1 | ColumnzxGponVoIPConfigDataAvailableSignalProtocol | read-only | current | This attribute defines, using a bitmap, the VoIP Signaling Protocols supported in the ONT. Valid bitmap values are: 0x00 = s, VoIP not supported 0x01 = SIP 0x0… |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.2 | ColumnzxGponVoIPConfigDataSignalProtocolUsed | read-write | current | This attribute identifies the type of VoIP signaling protocol used for ONT. Only one type of protocol is allowed. Valid values are: 0x00 = None 0x01 = SIP 0x02… |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.3 | ColumnzxGponVoIPConfigDataAvailableConfigMethod | read-only | current | This attribute indicates, using a bitmap, the capabilities of the ONT with regard to VoIP service configuration: 0x0001 indicates that the ONT is capable of us… |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.4 | ColumnzxGponVoIPConfigDataConfigMethodUsed | read-write | current | Indicates to the ONT, which method should be used to configure the VoIP Service of the ONT. 0x00 the ONT default - do not configure. 0x01 indicate use of OMCI … |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.5 | ColumnzxGponVoIPConfigDataConfigAddress | read-write | current | If this attribute is set to any value other than 0xFFFF, it points to a Network Address managed entity. In this case, the Network Address ME indicates the addr… |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.6 | ColumnzxGponVoIPOnuDomainName | read-write | current | ONU domain name is used to locate ONU by SS when the mode of MG registered to SS is using domain name. |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.7 | ColumnzxGponVoIPH248EquipName | read-write | current | ONU equipment name is used to locate ONU by SS when the mode of MG registered to SS is using equipment name. |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.8 | ColumnzxGponVoIPH248RegMode | read-write | current | This attribute specifies MID flag. |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.9 | ColumnzxGponVoIPMgcRegMode | read-write | current | This attribute specifies register mode. |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.10 | ColumnzxGponVoIPLineName | read-write | current | Line name sequence number.The default value is null(all zero bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.11 | ColumnzxGponVoIPIpAllocMode | read-write | current | VoIP allocate mode. |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.12 | ColumnzxGponVoIPCfgSvrValidateScheme | read-write | current | User Validation Scheme. |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.13 | ColumnzxGponVoIPCfgSvrUsername | read-write | current | User name for validation. |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.14 | ColumnzxGponVoIPCfgSvrPassword | read-write | current | Password for validation. |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.15 | ColumnzxGponVoIPCfgSvrRealm | read-write | current | A string to be displayed to users so they know which user name and password to use. This string should contain at least the name of the host performing the aut… |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.16 | ColumnzxGponVoIPCfgSvrRetrieveFile | read-write | current | This attribute is an action. It will be set independently to notify ONU to retrieve file again. |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.17 | ColumnzxGponVoIPCfgSvrRetrieveFileVer | read-only | current | This attribute indicates the version of the latest retrieved file. |
| 1.3.6.1.4.1.3902.1012.3.50.17.2.1.18 | ColumnzxGponVoIPCfgStatus | read-only | current | Indicates the status of the ONU VoIP service. Inactive: configuration retrieval has not been attempted Active: configuration was retrieved Initializing: config… |
| 1.3.6.1.4.1.3902.1012.3.50.17.3 | TablezxGponSIPAgentConfigDataTable | not-accessible | current | One instance of this managed entity is related to a TCP/UDP Config Data object. This managed entity may be referenced by one or more SIP User Data managed enti… |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1 | RowzxGponSIPAgentConfigDataEntry | not-accessible | current | It is entry in the zxGponSIPAgentConfigDataTable. |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.1 | ColumnzxGponSIPAgentConfigDataId | not-accessible | current | This attribute provides a unique number for each instance of this managed entity. (1~n)(R, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.2 | ColumnzxGponSIPAgentConfigDataProxyServer | read-write | current | This attribute provides a pointer to a LargeString ME that contains the name (IP address or URI) of the SIP Proxy Server for SIP signaling messages. (R, W, Set… |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.3 | ColumnzxGponSIPAgentConfigDataOutboundProxy | read-write | current | This attribute provides a pointer to a LargeString ME that contains the name (IP address or URI) of the SIP outbound Proxy Server for SIP signaling messages. (… |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.4 | ColumnzxGponSIPAgentConfigDataPrimaryDNS | read-write | current | This attribute defines the Primary SIP DNS IP Address. If this value is zero, the Primary SIP DNS should not be used. Default value of 0. (R, W, Set-by-create)… |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.5 | ColumnzxGponSIPAgentConfigDataSecondaryDNS | read-write | current | This attribute defines the Secondary SIP DNS IP Address. If this value is zero, the Secondary SIP DNS should not be used. Default value of 0. (R, W, Set-by-cre… |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.6 | ColumnzxGponSIPAgentConfigDataUDPTCPPort | read-write | current | This attribute indicates the UDP/TCP port num. This attribute associates the SIP Agent with the TCP/UDP service to be used for communication with the SIP Serve… |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.7 | ColumnzxGponSIPAgentConfigDataHostId | read-write | current | This attribute indicates the UDP/TCP port num. This attribute associates the SIP Agent with the TCP/UDP service to be used for communication with the SIP Serve… |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.8 | ColumnzxGponSIPAgentConfigDataRegExpTime | read-write | current | This attribute defines the SIP Registration Expiration Time in seconds. If this value is zero, the SIP Agent will not add an expiration time to the registratio… |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.9 | ColumnzxGponSIPAgentConfigDataReRegStartTime | read-write | current | This attribute provides the time in seconds prior to timeout that the SIP Agent should start the re-registration process. The default value used at Create shal… |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.10 | ColumnzxGponSIPAgentConfigDataHostPartURI | read-write | current | This attribute provides a pointer to a LargeString ME that contains the host or domain part of the SIP Address of Record for users connected to this ONT. A 0xF… |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.11 | ColumnzxGponSIPAgentConfigDataSIPStatus | read-only | current | This attribute is used to show the current status of the SIP Agent. Values are as follows: 0: ok/initial, 1: Connected, 2: Failed-ICMP Error, 3: Failed-Malform… |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.12 | ColumnzxGponSIPAgentConfigDataRegServer | read-write | current | This attribute provides a pointer to a Network Address ME that contains the name (IP address or resolved name) of the SIP Registrar Server for SIP signaling me… |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.13 | ColumnzxGponSIPAgentConfigDataValidatScheme | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.14 | ColumnzxGponSIPAgentConfigDataRegUserName | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.15 | ColumnzxGponSIPAgentConfigDataRegPassword | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.16 | ColumnzxGponSIPAgentConfigDataRealm | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.17 | ColumnzxGponSIPAgentConfigDataSSVendor | read-write | current | This attribute identifies the SIP Gateway softswitch vendor. The format is four ASCII coded alphabetic characters [A - Z] as defined in ANSI T1.220, All NULL c… |
| 1.3.6.1.4.1.3902.1012.3.50.17.3.1.18 | ColumnzxGponSIPAgentConfigDataEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.4 | TablezxGponSIPUserDataTable | not-accessible | current | An instance of this managed entity may be referenced by one VoIP Voice CTP managed entity. |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1 | RowzxGponSIPUserDataEntry | not-accessible | current | It is entry in the zxGponSIPUserDataTable. |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.1 | ColumnzxGponSIPUserDataAgentId | read-write | current | Points to the SIP Agent Config Data ME to be used for signaling. (R, W, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.2 | ColumnzxGponSIPUserDataUserPartAOR | read-write | current | This attribute provides a pointer to a LargeString ME that contains the user identification part of the Address of Record. This can take the form of an alphanu… |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.3 | ColumnzxGponSIPUserDataDisplayName | read-write | current | This attribute defines the Customer ID used for outgoing SIP messages display attribute in ASCII string format. Default value shall be null (all zeros). (R, W)… |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.4 | ColumnzxGponSIPUserDataUserName | read-write | current | A pointer to an Authentication Security Method ME that contains a SIP user name and password used for authentication. 0xFFFF indicates no username/password. (R… |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.5 | ColumnzxGponSIPUserDataPassword | read-write | current | A pointer to an Authentication Security Method ME that contains a SIP user name and password used for authentication. 0xFFFF indicates no username/password. (R… |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.6 | ColumnzxGponSIPUserDataVMailServerURI | read-write | current | This attribute provides a pointer to a Network Address ME that contains the name (IP address or URI) of the SIP Voice Mail Server for SIP signaling messages. A… |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.7 | ColumnzxGponSIPUserDataVMailValidateScheme | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.8 | ColumnzxGponSIPUserDataVMailUserName | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.9 | ColumnzxGponSIPUserDataVMailPassword | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.10 | ColumnzxGponSIPUserDataVMailRealm | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.11 | ColumnzxGponSIPUserDataVMailSubsciptExpTime | read-write | current | This attribute defines the Voice Mail server subscription Expiration Time in seconds. If this value is zero, the SIP Agent will use the implementation specific… |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.12 | ColumnzxGponSIPUserDataNetworkDialPlanPtr | read-write | current | Pointer to Network Dial Plan ME. A value of 0xFFFF indicates that no network dial plan is available. Default value is 0xFFFF. (R, W, Set-by-create) (mandatory)… |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.13 | ColumnzxGponSIPUserDataServiceProfilePtr | read-write | current | Pointer to Application Services Profile ME. A value of 0xFFFF indicates that no Application Services Profile is available. Default value is 0xFFFF. (R, W, Set-… |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.14 | ColumnzxGponSIPUserDataFeatureCodePtr | read-write | current | This attribute contains a pointer to the Feature Access Codes ME for this subscriber. A value of 0xFFFF indicates that no Feature Access Codes ME is available.… |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.15 | ColumnzxGponSIPUserDataReleaseTimer | read-write | current | This attribute contains a release timer defined in seconds. 0x0 = Use internal default, Default value is 10 sec. (R, W) (optional)(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.16 | ColumnzxGponSIPUserDataROHTimer | read-write | current | This attribute defines the length of time in seconds for the receiver off hook condition before ROH tone is applied. 0x0 = ROH is disabled. Default value is 15… |
| 1.3.6.1.4.1.3902.1012.3.50.17.4.1.17 | ColumnzxGponSIPUserDataEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.5 | TablezxGponVoIPVoiceCTPTable | not-accessible | current | An instance of this managed entity refers to one PPTP POTS UNI managed entity, one VoIP Media Profile, and one SIP User Data managed entity or MGC Config Data … |
| 1.3.6.1.4.1.3902.1012.3.50.17.5.1 | RowzxGponVoIPVoiceCTPEntry | not-accessible | current | It is entry in the zxGponVoIPVoiceCTPTable. |
| 1.3.6.1.4.1.3902.1012.3.50.17.5.1.1 | ColumnzxGponVoIPVoiceCTPMediaProfilePtr | read-write | current | Pointer to VOIP Media Profile. (R, W, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.17.5.1.2 | ColumnzxGponVoIPVoiceCTPSignalCode | read-write | current | This attribute specifies whether 'loop start' (0x01), 'ground start' (0x02), 'loop reverse battery' (0x03), 'coin first' (0x04), 'dial tone first' (0x05), or '… |
| 1.3.6.1.4.1.3902.1012.3.50.17.5.1.3 | ColumnzxGponVoIPVoiceCTPEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.5.1.4 | ColumnzxGponVoIPVoiceCTPMGCId | read-write | current | This attribute specifies the id of MGC related with POTS UNI. It's used when VoIP protocol is H.248. |
| 1.3.6.1.4.1.3902.1012.3.50.17.6 | TablezxGponVoIPLineStatusTable | not-accessible | current | An instance of this managed entity is associated with a PPTP POTS UNI. |
| 1.3.6.1.4.1.3902.1012.3.50.17.6.1 | RowzxGponVoIPLineStatusEntry | not-accessible | current | It is entry in the zxGponVoIPLineStatusTable. |
| 1.3.6.1.4.1.3902.1012.3.50.17.6.1.1 | ColumnzxGponVoIPLineStatusCodecUsed | read-only | current | Reports the current codec used for a VoIP POTS port.(2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.17.6.1.2 | ColumnzxGponVoIPLineStatusVoiceServerStatus | read-only | current | Status of the VoIP session for this POTS port(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.17.6.1.3 | ColumnzxGponVoIPLineStatusPortSessionType | read-only | current | This attribute reports the current state of a VoIP POTS port session.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.17.6.1.4 | ColumnzxGponVoIPLineStatusCall1PktPeriod | read-only | current | This attribute reports the packet period for the first call on the VoIP POTS port. The value is defined in milliseconds. (R) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.17.6.1.5 | ColumnzxGponVoIPLineStatusCall2PktPeriod | read-only | current | This attribute reports the packet period for the second call on the VoIP POTS port. The value is defined in milliseconds. (R) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.17.6.1.6 | ColumnzxGponVoIPLineStatusCall1DstAddr | read-only | current | This attribute reports the destination address for the first call on the VoIP POTS port. The value is an ASCII string. (R) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.17.6.1.7 | ColumnzxGponVoIPLineStatusCall2DstAddr | read-only | current | This attribute reports the destination address for the second call on the VoIP POTS port. The value is an ASCII string. (R) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.17.7 | TablezxGponMGCConfigDataTable | not-accessible | current | An instance of this managed entity may be associated with one or more VoIP voice CTP managed entities. |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1 | RowzxGponMGCConfigDataEntry | not-accessible | current | It is entry in the zxGponMGCConfigDataTable. |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.1 | ColumnzxGponMGCConfigDataId | not-accessible | current | This attribute provides a unique number for each instance of this managed entity. (1~n)(R, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.2 | ColumnzxGponMGCConfigDataPrimaryMGC | read-write | current | This attribute points to a network address ME that contains the name (IP address or resolved name) of the primary MGC that controls the signalling messages. Th… |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.3 | ColumnzxGponMGCConfigDataPrimaryValidateScheme | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.4 | ColumnzxGponMGCConfigDataPrimaryUsername | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.5 | ColumnzxGponMGCConfigDataPrimaryPassword | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.6 | ColumnzxGponMGCConfigDataPrimaryRealm | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.7 | ColumnzxGponMGCConfigDataSecondaryMGC | read-write | current | This attribute points to a network address ME that contains the name (IP address or resolved name) of the secondary or backup MGC that controls the signalling … |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.8 | ColumnzxGponMGCConfigDataSecondaryValidateScheme | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.9 | ColumnzxGponMGCConfigDataSecondaryUsername | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.10 | ColumnzxGponMGCConfigDataSecondaryPassword | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.11 | ColumnzxGponMGCConfigDataSecondaryRealm | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.12 | ColumnzxGponMGCConfigDataTCPUDPPort | read-write | current | This attribute specifies the port(1~65535) of TCP/UDP used for communication with the MGC. (R, W, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.13 | ColumnzxGponMGCConfigDataHostId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.14 | ColumnzxGponMGCConfigDataVersion | read-write | current | This integer attribute reports the version(1~255) of the Megaco protocol in use. (R, W, Set-by-create) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.15 | ColumnzxGponMGCConfigDataMessageFormat | read-write | current | This attribute defines the message format. Valid values are: 0 Text long 1 Text short 2 Binary The default value is 0. (R, W, Set-by-create) (mandatory) (1 byt… |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.16 | ColumnzxGponMGCConfigDataMaxRetryTime | read-write | current | This attribute specifies the maximum retry time for MGC transactions, in seconds. The default value 0 specifies vendor-specific implementation (R, W) (optional… |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.17 | ColumnzxGponMGCConfigDataMaxRetryAttempts | read-write | current | This attribute specifies the maximum number of times a message is retransmitted to the MGC. The default value 0 specifies vendor-specific implementation (R, W,… |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.18 | ColumnzxGponMGCConfigDataServiceChangeDelay | read-write | current | The attribute specifies the service status delay time for changes in line service status. This attribute is specified in seconds. The default value 0 specifies… |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.19 | ColumnzxGponMGCConfigDataTerminationIDbase | read-write | current | The attribute specifies the base string for the H.248 physical termination id(s) for this ONT. This string is intended to uniquely identify an ONT. Vendor spec… |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.20 | ColumnzxGponMGCConfigDataSSVendor | read-write | current | This attribute identifies the gateway softswitch vendor. The format is four ASCII coded alphabetic characters [A..Z] as defined in ANSI T1.220. A value of four… |
| 1.3.6.1.4.1.3902.1012.3.50.17.7.1.21 | ColumnzxGponMGCConfigDataEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.17.8 | TablezxGponSipUserTable | not-accessible | current | This table includes sip user configuration. |
| 1.3.6.1.4.1.3902.1012.3.50.17.8.1 | RowzxGponSipUserEntry | not-accessible | current | It is entry in the zxGponSipUserTable. |
| 1.3.6.1.4.1.3902.1012.3.50.17.8.1.1 | ColumnzxGponSipUserProfileId | read-create | current | This object indicates the profile ID. |
| 1.3.6.1.4.1.3902.1012.3.50.17.8.1.2 | ColumnzxGponSipUserPartAor | read-create | current | This attribute points to a large string that contains the user identification part of the address of record. This can take the form of an alphanumeric string o… |
| 1.3.6.1.4.1.3902.1012.3.50.17.8.1.3 | ColumnzxGponSipUsername | read-create | current | This string attribute is the user name. |
| 1.3.6.1.4.1.3902.1012.3.50.17.8.1.4 | ColumnzxGponSipUserPassword | read-create | current | This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.17.8.1.5 | ColumnzxGponSipUserDisplayName | read-create | current | This attribute defines the Customer ID used for outgoing SIP messages display attribute in ASCII string format.Default value shall be null (all zeros). (R, W) … |
| 1.3.6.1.4.1.3902.1012.3.50.17.8.1.6 | ColumnzxGponSipUserVMailServerUri | read-create | current | This attribute provides a pointer to a Network Address ME that contains the name (IP address or URI) of the SIP Voice Mail Server for SIP signaling messages. A… |
| 1.3.6.1.4.1.3902.1012.3.50.17.8.1.7 | ColumnzxGponSipUserVMailValidScheme | read-create | current | This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Val… |
| 1.3.6.1.4.1.3902.1012.3.50.17.8.1.8 | ColumnzxGponSipUserVMailUsername | read-create | current | This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note). (R, W) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.17.8.1.9 | ColumnzxGponSipUserVMailPassword | read-create | current | This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.17.8.1.10 | ColumnzxGponSipUserVMailRealm | read-create | current | This string attribute specifies the realm used in digest authentication. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory)… |
| 1.3.6.1.4.1.3902.1012.3.50.17.8.1.11 | ColumnzxGponSipUserVMailSubsExpTime | read-create | current | This attribute defines the Voice Mail server subscription Expiration Time in seconds. If this value is zero, the SIP Agent will use the implementation specific… |
| 1.3.6.1.4.1.3902.1012.3.50.17.8.1.12 | ColumnzxGponSipUserMediaProfile | read-create | current | This attribute refers to the name of table 'zxGponVoIPMediaProfileTable'. |
| 1.3.6.1.4.1.3902.1012.3.50.17.8.1.13 | ColumnzxGponSipUserVoiceCTPSignalCode | read-create | current | This attribute specifies whether 'loop start' (0x01), 'ground start' (0x02), 'loop reverse battery' (0x03), 'coin first' (0x04), 'dial tone first' (0x05), 'mul… |
| 1.3.6.1.4.1.3902.1012.3.50.17.8.1.30 | ColumnzxGponSipUserRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.17.9 | TablezxGponMgcUserTable | not-accessible | current | This table includes mgc user configuration. |
| 1.3.6.1.4.1.3902.1012.3.50.17.9.1 | RowzxGponMgcUserEntry | not-accessible | current | It is entry in the zxGponMGCTable. |
| 1.3.6.1.4.1.3902.1012.3.50.17.9.1.1 | ColumnzxGponMgcUserProfileId | read-create | current | This Object indicates the MGC Profile index. |
| 1.3.6.1.4.1.3902.1012.3.50.17.9.1.2 | ColumnzxGponMgcUserMediaProfile | read-create | current | This attribute refers to the name of table 'zxGponVoIPMediaProfileTable'. |
| 1.3.6.1.4.1.3902.1012.3.50.17.9.1.3 | ColumnzxGponMgcUserVoiceCTPSignalCode | read-create | current | This attribute specifies whether 'loop start' (0x01), 'ground start' (0x02), 'loop reverse battery' (0x03), 'coin first' (0x04), 'dial tone first' (0x05), 'mul… |
| 1.3.6.1.4.1.3902.1012.3.50.17.9.1.30 | ColumnzxGponMgcUserRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.17.10 | TablezxGponPotsTestTable | not-accessible | current | It is table for ONU UNI POTS test. |
| 1.3.6.1.4.1.3902.1012.3.50.17.10.1 | RowzxGponPotsTestEntry | not-accessible | current | It is entry in the zxGponPotsTestTable. |
| 1.3.6.1.4.1.3902.1012.3.50.17.10.1.1 | ColumnzxGponPotsTestMode | read-write | current | The test mode are defined as described below normal(1) force(2) |
| 1.3.6.1.4.1.3902.1012.3.50.17.10.1.2 | ColumnzxGponPotsTestItem | read-write | current | POTS test item as described below allMltTests hazardousPotential foreignEmf resistiveFaults receiverOffHook ringer nt1DcSignatureTest selfTest dialToneMakeBrea… |
| 1.3.6.1.4.1.3902.1012.3.50.17.10.1.3 | ColumnzxGponPotsTestAction | read-write | current | The test action are defined as described below start stop Before start action,need to ensure that zxGponPotsTestStatus is not in 'inProgress' state. |
| 1.3.6.1.4.1.3902.1012.3.50.17.11 | TablezxGponPotsTestResultTable | not-accessible | current | It is table for ONU UNI POTS test result. |
| 1.3.6.1.4.1.3902.1012.3.50.17.11.1 | RowzxGponPotsTestResultEntry | not-accessible | current | It is entry in the zxGponPotsTestResultTable. |
| 1.3.6.1.4.1.3902.1012.3.50.17.11.1.1 | ColumnzxGponPotsTestStatus | read-only | current | The status of POTS UNI test. |
| 1.3.6.1.4.1.3902.1012.3.50.17.11.1.2 | ColumnzxGponPotsTestResult | read-only | current | The result of POTS UNI Test which returns in text format. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12 | TablezxGponOnuVoipIpConfigTable | not-accessible | current | VoIP IP configuration table. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1 | RowzxGponOnuVoipIpConfigEntry | not-accessible | current | VoIP IP configuration entry. Entries in the zxGponOnuVoipIpConfigTable are created and deleted using the zxGponOnuVoipIpConfigRowStatus object. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.3 | ColumnzxGponOnuSlotId | not-accessible | current | This attribute indicates the index of slot in ONT. If slot ID is zero, it means the ONU is box-type, which can not plug card. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.4 | ColumnzxGponOnuMediaIndex | not-accessible | current | This attribute indicates the whether the separation of media and signaling.If 'media' is configured,The media will use a separation IP address,otherwise media … |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.5 | ColumnzxGponOnuVoipIpMode | read-create | current | IP address configuration mode. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.6 | ColumnzxGponOnuVoipIpProfile | read-create | current | This attribute refers to the name of table 'zxGponVoipIpProfileTable'.If no profile name is indicated, this attribute is set to a empty string. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.7 | ColumnzxGponOnuVoipVlanProfile | read-create | current | This attribute refers to the id of table 'zxGponVoipVlanProfileTable'.If no profile name is indicated, this attribute is set to a null string. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.8 | ColumnzxGponOnuVoipHostId | read-create | current | The ONU IP host ID,if no specify this attribute, system will used a available IP host id. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.9 | ColumnzxGponOnuVoipOnuIdentifier | read-create | current | This attribute is relation to 'zxGponOnuVoipIpMode'. This attribute is valid only when 'zxGponOnuVoipIpMode' is dhcp. A unique ONU identifier string. If set to… |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.10 | ColumnzxGponOnuVoipIpAddrType | read-create | current | The type of IP address denoted in zxGponOnuVoipIpAddr object. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.11 | ColumnzxGponOnuVoipIpAddr | read-create | current | This attribute is relation to 'zxGponOnuVoipIpMode'. This attribute is valid only when 'zxGponOnuVoipIpMode' is static. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.12 | ColumnzxGponOnuVoipIpAddrPfxLen | read-create | current | VoIP IP address prefix length. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.13 | ColumnzxGponOnuVoipPppoeMode | read-create | current | This attribute is relation to 'zxGponOnuVoipIpMode'. This attribute is valid only when 'zxGponOnuVoipIpMode' is pppoe. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.14 | ColumnzxGponOnuVoipPppoeUserName | read-create | current | This attribute is relation to 'zxGponOnuVoipIpMode'. This attribute is valid only when 'zxGponOnuVoipIpMode' is pppoe. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.15 | ColumnzxGponOnuVoipPppoePassWord | read-create | current | This attribute is relation to 'zxGponOnuVoipIpMode'. This attribute is valid only when 'zxGponOnuVoipIpMode' is pppoe. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.16 | ColumnzxGponOnuVoipCurrentIpAddrType | read-only | current | The type of IP address denoted in zxGponOnuVoipCurrentIpAddr object. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.17 | ColumnzxGponOnuVoipCurrentIpAddr | read-only | current | The current IP address. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.18 | ColumnzxGponOnuVoipCurrentIpAddrPfxLen | read-only | current | The current IP address prefix length. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.19 | ColumnzxGponOnuVoipCurrentGatewayType | read-only | current | The type of IP address denoted in zxGponOnuVoipCurrentGateway object. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.20 | ColumnzxGponOnuVoipCurrentGateway | read-only | current | The current gateway. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.21 | ColumnzxGponOnuVoipCurrentPriDnsType | read-only | current | The type of IP address denoted in zxGponOnuVoipCurrentPriDns object. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.22 | ColumnzxGponOnuVoipCurrentPriDns | read-only | current | The current primary DNS. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.23 | ColumnzxGponOnuVoipCurrentSecDnsType | read-only | current | The type of IP address denoted in zxGponOnuVoipCurrentSecDns object. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.24 | ColumnzxGponOnuVoipCurrentSecDns | read-only | current | The current second DNS. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.25 | ColumnzxGponOnuVoipDomainName | read-only | current | If DHCP indicates a domain name, it is presented here. If no domain name is indicated, this attribute is set to a null string. If the string is shorter than 25… |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.26 | ColumnzxGponOnuVoipHostName | read-only | current | If DHCP indicates a host name, it is presented here. If no host name is indicated, this attribute is set to a null string.If the string is shorter than 25 byte… |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.27 | ColumnzxGponOnuVoipMacAddress | read-only | current | This attribute indicates the MAC address used by the IP node. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.28 | ColumnzxGponOnuVoipResponsePing | read-create | current | This attribute indicates whether respond to pings. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.29 | ColumnzxGponOnuVoipResponseTraceRoute | read-create | current | This attribute indicates whether respond to trace route. |
| 1.3.6.1.4.1.3902.1012.3.50.17.12.1.50 | ColumnzxGponOnuVoipIpConfigRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1012.3.50.18 | NodezxGponRmTDMMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.18.1 | TablezxGponPptpCESUNITable | not-accessible | current | his managed entity represents the point at a CES UNI in the ONT where the physical path terminates and physical level functions are performed. |
| 1.3.6.1.4.1.3902.1012.3.50.18.1.1 | RowzxGponPptpCESUNIEntry | not-accessible | current | It is entry in the zxGponPptpCESUNITable. |
| 1.3.6.1.4.1.3902.1012.3.50.18.1.1.1 | ColumnzxGponPptpCESUNIExpectedType | read-write | current | The following coding is used for this attribute: 0 Autosense 1 to 254 One of the values from table 9.1.5-1/G.984.4 that is compatible with a CES circuit pack.(… |
| 1.3.6.1.4.1.3902.1012.3.50.18.1.1.2 | ColumnzxGponPptpCESUNISensedType | read-only | current | If the value of expected type is not 0, then the value of sensed type equals the value of expected type. If expected type = 0, then the value of sensed type is… |
| 1.3.6.1.4.1.3902.1012.3.50.18.1.1.3 | ColumnzxGponPptpCESUNILoopback | read-write | current | This attribute specifies and reports the loopback configuration of the physical interface.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.18.1.1.4 | ColumnzxGponPptpCESUNIAdminState | read-write | current | This attribute is used to activate (unlock: value 0x00) and deactivate (lock: value 0x01) the functions performed by instances of this managed entity.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.18.1.1.5 | ColumnzxGponPptpCESUNIOperState | read-only | current | This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive … |
| 1.3.6.1.4.1.3902.1012.3.50.18.1.1.6 | ColumnzxGponPptpCESUNIDs1Framing | read-write | current | This attribute specifies the DS1 framing structure.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.18.1.1.7 | ColumnzxGponPptpCESUNIEncoding | read-write | current | This attribute specifies the line coding scheme.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.18.1.1.8 | ColumnzxGponPptpCESUNILineLength | read-write | current | This attribute specifies the length of the twisted pair cable from a DS1 physical UNI to the DSX-1 cross-connect point or the length of co-axial cable from a D… |
| 1.3.6.1.4.1.3902.1012.3.50.18.1.1.9 | ColumnzxGponPptpCESUNIDs1Mode | read-write | current | This attribute specifies the mode of a DS1.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.18.1.1.10 | ColumnzxGponPptpCESUNIARC | read-write | current | This attribute is used to control alarm reporting from this managed entity. See clause I.1.8/G.984.4.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.18.1.1.11 | ColumnzxGponPptpCESUNIARCInterval | read-write | current | This attribute provides a provisionable length of time. See clause I.1.8/G.984.4.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.18.1.1.12 | ColumnzxGponPptpCESUNILineType | read-write | current | This attribute specifies the line type used in a DS3 or E3 application.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.18.2 | TablezxGponCESoETHConfigTable | not-accessible | current | The Ethernet flow termination point contains the attributes necessary to originate and terminate Ethernet frames in the ONT. It is appropriate when transportin… |
| 1.3.6.1.4.1.3902.1012.3.50.18.2.1 | RowzxGponCESoETHConfigEntry | not-accessible | current | It is entry in the zxGponCESoETHConfigTable. |
| 1.3.6.1.4.1.3902.1012.3.50.18.2.1.1 | ColumnzxGponCESoETHBridgeIndex | read-write | current | This attribute indicates the index of MAC bridge in ONT, from 1 to M. The first byte specifies the slot Id associated with this MAC bridge; the second byte spe… |
| 1.3.6.1.4.1.3902.1012.3.50.18.2.1.2 | ColumnzxGponCESoETHTxPayloadECID | read-write | current | reference to Transmit circuit ID in G.984.4 9.8.5 Pseudowire termination point, This attribute is a pair of ECID (Ethernet circuit ID)values that the ONT trans… |
| 1.3.6.1.4.1.3902.1012.3.50.18.2.1.3 | ColumnzxGponCESoETHTxSignallingECID | read-write | current | reference to Transmit circuit ID in G.984.4 9.8.5 Pseudowire termination point, this is the second which is required only if signalling is to be carried in a d… |
| 1.3.6.1.4.1.3902.1012.3.50.18.2.1.4 | ColumnzxGponCESoETHExpPayloadECID | read-write | current | reference to Expected circuit ID in G.984.4 9.8.5 Pseudowire termination point, This attribute is a pair of ECID (Ethernet circuit ID) values that the ONT can … |
| 1.3.6.1.4.1.3902.1012.3.50.18.2.1.5 | ColumnzxGponCESoETHExpSignallingECID | read-write | current | reference to Expected circuit ID in G.984.4 9.8.5 Pseudowire termination point, This attribute is a pair of ECID (Ethernet circuit ID) values that the ONT can … |
| 1.3.6.1.4.1.3902.1012.3.50.18.2.1.6 | ColumnzxGponCESoETHRecvPayloadECID | read-only | current | reference to Received circuit ID in G.984.4 9.8.5 Pseudowire termination point, This attribute is a pair of ECID (Ethernet circuit ID) values that the ONT can … |
| 1.3.6.1.4.1.3902.1012.3.50.18.2.1.7 | ColumnzxGponCESoETHRecvSignallingECID | read-only | current | reference to Received circuit ID in G.984.4 9.8.5 Pseudowire termination point, This attribute is a pair of ECID (Ethernet circuit ID) values that the ONT can … |
| 1.3.6.1.4.1.3902.1012.3.50.18.2.1.8 | ColumnzxGponCESoETHTagPolicy | read-write | current | This attribute specifies the tagging policy to be applied to upstream Ethernet frames.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.18.2.1.9 | ColumnzxGponCESoETHVlanTagVal | read-write | current | If the tag policy calls for tagging of upstream Ethernet frames, this attribute specifies the tag control information, which includes the VLAN tag, P bits and … |
| 1.3.6.1.4.1.3902.1012.3.50.18.2.1.10 | ColumnzxGponCESoETHSrcMac | read-only | current | This attribute specifies the near-end MAC address. It is established by non-OMCI means (eg factory programmed into ONT flash memory) and included here for info… |
| 1.3.6.1.4.1.3902.1012.3.50.18.2.1.11 | ColumnzxGponCESoETHDstMac | read-write | current | This attribute specifies the MAC address of the destination Ethernet frames. (R, W, Set-by-create) (mandatory) (6 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.18.2.1.12 | ColumnzxGponCESoETHLoopback | read-write | current | This attribute sets the loopback configuration: 0 No loopback 1 Loopback of downstream traffic at MAC client(R, W) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.18.2.1.20 | ColumnzxGponCESoETHEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.18.3 | TablezxGponCESoIPConfigTable | not-accessible | current | The pseudowire termination point supports packetized (rather than TDM) G-PON transport of TDM services, transported either directly over Ethernet or over UDP/I… |
| 1.3.6.1.4.1.3902.1012.3.50.18.3.1 | RowzxGponCESoIPConfigEntry | not-accessible | current | It is entry in the zxGponCESoIPConfigTable. |
| 1.3.6.1.4.1.3902.1012.3.50.18.3.1.1 | ColumnzxGponCESoIPNearEndIp | read-write | current | When the pseudowire service is transported via IP, this attribute points to an instance of the TCP/UDP config data managed entity. The default value 0 is appli… |
| 1.3.6.1.4.1.3902.1012.3.50.18.3.1.2 | ColumnzxGponCESoIPHostId | read-write | current | (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.18.3.1.3 | ColumnzxGponCESoIPFarEndIp | read-write | current | When the pseudowire service is transported via IP, this attribute points to a large string managed entity that contains the URI of the far-end termination poin… |
| 1.3.6.1.4.1.3902.1012.3.50.18.3.1.10 | ColumnzxGponCESoIPEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.18.4 | TablezxGponPwTDMConfigTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.18.4.1 | RowzxGponPwTDMConfigEntry | not-accessible | current | It is entry in the zxGponPwTDMConfigTable. |
| 1.3.6.1.4.1.3902.1012.3.50.18.4.1.1 | ColumnzxGponPwTDMPayloadSize | read-write | current | Number of payload bytes per packet. Valid only if service type = unstructured or unstructured octet-aligned. Valid choices depend on the TDM service, but must … |
| 1.3.6.1.4.1.3902.1012.3.50.18.4.1.2 | ColumnzxGponPwTDMPayloadDelay | read-write | current | Number of 125 microsecond frames to be encapsulated in each pseudowire packet. Valid only if service type = structured. The minimum set of choices for various … |
| 1.3.6.1.4.1.3902.1012.3.50.18.4.1.3 | ColumnzxGponPwTDMTimingMode | read-write | current | This attribute selects the timing mode of the TDM service. If RTP is used, this attribute must be set to be consistent with the value of the RTP time stamp mod… |
| 1.3.6.1.4.1.3902.1012.3.50.18.4.1.4 | ColumnzxGponPwTDMProfile | read-write | current | This attribute points to an instance of the pseudowire maintenance profile managed entity. If the pointer has its default value 0, the ONT's internal defaults … |
| 1.3.6.1.4.1.3902.1012.3.50.18.4.1.5 | ColumnzxGponPwTDMTransport | read-write | current | Underlying transport: 0 Ethernet, MEF8 1 UDP/IP (R, W, Set-by-create) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.18.5 | TablezxGponPwOptionalConfigTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.18.5.1 | RowzxGponPwOptionalConfigEntry | not-accessible | current | It is entry in the zxGponPwTDMConfigTable. |
| 1.3.6.1.4.1.3902.1012.3.50.18.5.1.1 | ColumnzxGponPwOptionalServiceType | read-write | current | This attribute specifies the basic service type, either a transparent bit pipe or an encapsulation that recognizes the underlying structure of the payload. 0 B… |
| 1.3.6.1.4.1.3902.1012.3.50.18.5.1.2 | ColumnzxGponPwOptionalSignalling | read-write | current | 0 No signalling visible at this layer 1 CAS, to be carried in the same packet stream as the payload 2 CAS, to be carried in a separate signalling channel (R, W… |
| 1.3.6.1.4.1.3902.1012.3.50.18.5.1.3 | ColumnzxGponPwOptionalARC | read-write | current | See clause I.1.8/G.984.4. (R, W) (optional) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.18.5.1.4 | ColumnzxGponPwOptionalARCInterval | read-write | current | See clause I.1.8/G.984.4. (R, W) (optional) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.18.6 | TablezxGponPwRTPConfigTable | not-accessible | current | The pseudowire termination point supports packetized (rather than TDM) G-PON transport of TDM services, transported either directly over Ethernet or over UDP/I… |
| 1.3.6.1.4.1.3902.1012.3.50.18.6.1 | RowzxGponPwRTPConfigEntry | not-accessible | current | It is entry in the zxGponPwRTPConfigTable. |
| 1.3.6.1.4.1.3902.1012.3.50.18.6.1.1 | ColumnzxGponPwRTPTsMode | read-write | current | This attribute determines the mode in which RTP timestamps are generated in the TDM to PSN direction. 0 Unknown or not applicable (default) 1 Absolute. Timesta… |
| 1.3.6.1.4.1.3902.1012.3.50.18.6.1.2 | ColumnzxGponPwRTPPayloadPTYPE | read-write | current | PTYPE specifies the RTP payload type in the TDM to PSN direction. It comprises two values. The first is for the payload channel, the second, for the optional s… |
| 1.3.6.1.4.1.3902.1012.3.50.18.6.1.3 | ColumnzxGponPwRTPSignallingPTYPE | read-write | current | PTYPE specifies the RTP payload type in the TDM to PSN direction. It comprises two values. The first is for the payload channel, the second, for the optional s… |
| 1.3.6.1.4.1.3902.1012.3.50.18.6.1.4 | ColumnzxGponPwRTPExpPayloadPTYPE | read-write | current | Expected PTYPE specifies the RTP payload type in the PSN to TDM direction. The received payload type may be used to detect malformed packets. It comprises two … |
| 1.3.6.1.4.1.3902.1012.3.50.18.6.1.5 | ColumnzxGponPwRTPExpSignallingPTYPE | read-write | current | Expected PTYPE specifies the RTP payload type in the PSN to TDM direction. The received payload type may be used to detect malformed packets. It comprises two … |
| 1.3.6.1.4.1.3902.1012.3.50.18.6.1.6 | ColumnzxGponPwRTPPayloadSSRC | read-write | current | SSRC specifies the RTP synchronization source in the TDM to PSN direction. It comprises two values. The first is for the payload channel, the second, for the o… |
| 1.3.6.1.4.1.3902.1012.3.50.18.6.1.7 | ColumnzxGponPwRTPSignallingSSRC | read-write | current | SSRC specifies the RTP synchronization source in the TDM to PSN direction. It comprises two values. The first is for the payload channel, the second, for the o… |
| 1.3.6.1.4.1.3902.1012.3.50.18.6.1.8 | ColumnzxGponPwRTPExpPayloadSSRC | read-write | current | Expected SSRC specifies the RTP synchronization source in the PSN to TDM direction. The received SSRC may be used to detect misconnection (stray packets). It c… |
| 1.3.6.1.4.1.3902.1012.3.50.18.6.1.9 | ColumnzxGponPwRTPExpSignallingSSRC | read-write | current | Expected SSRC specifies the RTP synchronization source in the PSN to TDM direction. The received SSRC may be used to detect misconnection (stray packets). It c… |
| 1.3.6.1.4.1.3902.1012.3.50.18.6.1.10 | ColumnzxGponPwRTPClockReference | read-write | current | This attribute specifies the frequency of the common timing reference, in multiples of 8 kHz. The default value is 1 (8 kHz). (R, W, Set-by-create) (mandatory)… |
| 1.3.6.1.4.1.3902.1012.3.50.18.6.1.20 | ColumnzxGponPwRTPEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.19 | NodezxGponRmMiscMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.19.1 | TablezxGponPptpVideoUNITable | not-accessible | current | This managed entity represents the point at the video UNI in the ONT where physical paths terminate and physical path level functions are performed. One or mor… |
| 1.3.6.1.4.1.3902.1012.3.50.19.1.1 | RowzxGponPptpVideoUNIEntry | not-accessible | current | It is entry in the zxGponPptpVideoUNITable. |
| 1.3.6.1.4.1.3902.1012.3.50.19.1.1.1 | ColumnzxGponPptpVideoUNIAdminState | read-write | current | This attribute is used to activate (unlock: value 0x00) and deactivate (lock: value 0x01) the functions performed by instances of this managed entity.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.19.1.1.2 | ColumnzxGponPptpVideoUNIOperState | read-only | current | This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive … |
| 1.3.6.1.4.1.3902.1012.3.50.19.1.1.3 | ColumnzxGponPptpVideoUNIARC | read-write | current | This attribute is used to control alarm reporting from this managed entity. See I.1.8 for a complete description.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.19.1.1.4 | ColumnzxGponPptpVideoUNIARCInterval | read-write | current | This attribute provides a provisionable length of time. See I.1.8 for a complete description.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.19.1.1.5 | ColumnzxGponPptpVideoUNIPowerControl | read-write | current | This attribute controls whether power is provided to an external equipment over the Ethernet PPTP. Value 0x01 enables power over Ethernet. The default value 0x… |
| 1.3.6.1.4.1.3902.1012.3.50.19.3 | TablezxGponPptpVideoAniTable | not-accessible | current | This managed entity represents an RF video ANI in the ONU, where physical paths terminate and physical path level functions are performed. An instance of this … |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1 | RowzxGponPptpVideoAniEntry | not-accessible | current | It is entry in the zxGponPptpVideoAniTable. |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.1 | ColumnzxGponVideoAniAdminState | read-write | current | This attribute is used to activate (unlock: value 0x00) and deactivate (lock: value 0x01) the functions performed by instances of this managed entity.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.2 | ColumnzxGponVideoAniOperState | read-only | current | This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive … |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.3 | ColumnzxGponVideoAniArc | read-write | current | This attribute is used to control alarm reporting from this managed entity. See A.1.4.3 for a complete description.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.4 | ColumnzxGponVideoAniArcInterval | read-write | current | This attribute provides a provisionable length of time. The special value 255 means that the timer never expires. See A.1.4.3 for a complete description.(1 byt… |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.5 | ColumnzxGponVideoAniFreqRangeLow | read-only | current | This attribute indicates the lower of the two possible frequency ranges supported. Different frequency ranges are indicated by code points: noLowBand(1): No lo… |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.6 | ColumnzxGponVideoAniFreqRangeHigh | read-only | current | This attribute indicates the higher of the two frequency ranges supported. Different frequency ranges are indicated by code points: noHighBand(1): No high band… |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.7 | ColumnzxGponVideoAniSignalCapability | read-only | current | This attribute indicates the capability of the ONU to measure the video signal level. Capabilities are indicated by code points: noCapability(1): No signal lev… |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.8 | ColumnzxGponVideoAniOpticalSignalLevel | read-only | current | This attribute is an unsigned integer that returns the current measurement of the total optical signal level. If signal capability = 1, 3, 5 or 7, this attribu… |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.9 | ColumnzxGponVideoAniPilotSignalLevel | read-only | current | This attribute indicates the current measurement of the pilot signal level or broadband RF level. If signal capability = 1 or 2, then this attribute is undefin… |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.10 | ColumnzxGponVideoAniSignalLevelMin | read-only | current | This attribute indicates the minimum optical RF power per channel that results in a CNR of 47 dBc for a channel of 4.5 MHz bandwidth at a receive optical power… |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.11 | ColumnzxGponVideoAniSignalLevelMax | read-only | current | This attribute indicates the maximum optical RF power per channel that results in a CTB of -57 dBc for an 80-channel ensemble of carriers at a per-channel opti… |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.12 | ColumnzxGponVideoAniPilotFrequency | read-write | current | This attribute specifies the frequency of the pilot channel receiver. The unit of this attribute is Hz. If signal capability = 1, 2, 7 or 8, this attribute is … |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.13 | ColumnzxGponVideoAniAgcMode | read-write | current | This attribute allows the discovery and configuration of the ONU's AGC capabilities. The attribute contains a code point for several AGC types. The ONU display… |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.14 | ColumnzxGponVideoAniAgcValue | read-write | current | This attribute indicates the measurement offset that the ONU should use in AGC. The attribute has a step size of 0.1 dB, represented as a signed integer. |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.15 | ColumnzxGponVideoAniLowerOpticalThresh | read-write | current | This attribute specifies the optical level used to declare the video OOR low alarm. Valid values are -12 to +6 dBm in 0.1 dB increments, represented as a 2s co… |
| 1.3.6.1.4.1.3902.1012.3.50.19.3.1.16 | ColumnzxGponVideoAniUpperOpticalThresh | read-write | current | This attribute specifies the optical level used to declare the video OOR high alarm. Valid values are -12 to +6 dBm in 0.1 dB increments, represented as a 2s c… |
| 1.3.6.1.4.1.3902.1012.3.50.20 | NodezxGponRmProfileMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.20.1 | TablezxGponFilterRuleTable | not-accessible | current | This managed entity organizes data associated with VLAN tagging. Regardless of its point of attachment, the specified tagging operations refer to the upstream … |
| 1.3.6.1.4.1.3902.1012.3.50.20.1.1 | RowzxGponFilterRuleEntry | not-accessible | current | It is entry in the zxGponFilterRuleEntry. |
| 1.3.6.1.4.1.3902.1012.3.50.20.1.1.1 | ColumnzxGponFilterRuleId | not-accessible | current | This attribute provides a unique number for each instance of this managed entity. (R, Set-by-create) (mandatory) (4 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.1.1.2 | ColumnzxGponFilterRuleName | read-write | current | This attribute provides a unique name for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.1.1.3 | ColumnzxGponFilterRuleTagNum | read-write | current | This attribute provides the number of tag. (R, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.1.1.4 | ColumnzxGponFilterRuleEthType | read-write | current | The Ethertype value on which to filter received frames, as listed below. Note: This filter is recommended for use on untagged frames or frames with only priori… |
| 1.3.6.1.4.1.3902.1012.3.50.20.1.1.5 | ColumnzxGponFilterRuleInnerPrio | read-write | current | Filter received frames on this priority value(0-7).Do not filter on inner priority(8). This is the default filter when no other one-tag rule applies(14).This e… |
| 1.3.6.1.4.1.3902.1012.3.50.20.1.1.6 | ColumnzxGponFilterRuleInnerVID | read-write | current | Filter received frames on this VID value(0-4094).Do not filter on the inner VID(4096).(13 bits) |
| 1.3.6.1.4.1.3902.1012.3.50.20.1.1.7 | ColumnzxGponFilterRuleInnerTPID | read-write | current | Filter Inner TPID/DE: (3 bits) |
| 1.3.6.1.4.1.3902.1012.3.50.20.1.1.8 | ColumnzxGponFilterRuleOuterPrio | read-write | current | Filter received frames on this priority value(0-7).Do not filter on outer priority.(8). This is the default filter when no other two-tag rule applies(14).This … |
| 1.3.6.1.4.1.3902.1012.3.50.20.1.1.9 | ColumnzxGponFilterRuleOuterVID | read-write | current | Filter received frames on this VID value(0-4094).Do not filter on the outer VID(4096).(13 bits) |
| 1.3.6.1.4.1.3902.1012.3.50.20.1.1.10 | ColumnzxGponFilterRuleOuterTPID | read-write | current | Filter outer TPID/DE: (3 bits) |
| 1.3.6.1.4.1.3902.1012.3.50.20.1.1.11 | ColumnzxGponFilterRuleRefCnt | read-only | current | Forbidden to delete table entry if not equal zero. |
| 1.3.6.1.4.1.3902.1012.3.50.20.1.1.12 | ColumnzxGponFilterRuleEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.20.1.1.13 | ColumnzxGponFilterRuleFlowClassType | read-write | current | This attribute specifies the flow classification data type of this entry, 'notCare' means that data will not be filtered by specified data type, 'zxGponFilterR… |
| 1.3.6.1.4.1.3902.1012.3.50.20.1.1.14 | ColumnzxGponFilterRuleFlowClassData | read-write | current | This attribute specifies the filter data contend of this entry. If FilterDataType is ip, this attribute indicates the ip address using the first 4 bytes; If Fi… |
| 1.3.6.1.4.1.3902.1012.3.50.20.2 | TablezxGponTreatmentRuleTable | not-accessible | current | This managed entity organizes data associated with VLAN tagging. Regardless of its point of attachment, the specified tagging operations refer to the upstream … |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1 | RowzxGponTreatmentRuleEntry | not-accessible | current | It is entry in the zxGponTreatmentRuleEntry. |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.1 | ColumnzxGponTreatmentRuleId | not-accessible | current | This attribute provides a unique number for each instance of this managed entity. (R, Set-by-create) (mandatory) (4 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.2 | ColumnzxGponTreatmentRuleName | read-write | current | This attribute provides a unique name for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.3 | ColumnzxGponTreatmentRuleTagsRemove | read-write | current | This attribute provides the number of tags to remove(0~2).(R, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.4 | ColumnzxGponTreatmentRuleAddInnerTag | read-write | current | This Boolean attribute indicates whether or not a add inner tag is enabled. The value TRUE means enabled.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.5 | ColumnzxGponTreatmentRuleAddOuterTag | read-write | current | This Boolean attribute indicates whether or not a add outer tag is enabled. The value TRUE means enabled.(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.6 | ColumnzxGponTreatmentRuleInnerPrio | read-write | current | Treatment priority: (4 bits) |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.7 | ColumnzxGponTreatmentRuleInnerPrioInsert | read-write | current | Use this value as the priority to insert in the inner VLAN tag. (0-7)(4 bits) |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.8 | ColumnzxGponTreatmentRuleInnerVID | read-write | current | Treatment VID: (13 bits) |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.9 | ColumnzxGponTreatmentRuleInnerVIDInsert | read-write | current | Use this value as the VID in the inner VLAN tag. (0-4094)(13 bits) |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.10 | ColumnzxGponTreatmentRuleInnerTPID | read-write | current | Treatment inner TPID/DE: (3 bits) 000 Copy TPID (and DE, if present) from inner tag of received frame 001 Copy TPID (and DE, if present) from outer tag of rece… |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.11 | ColumnzxGponTreatmentRuleOuterPrio | read-write | current | Treatment priority: (4 bits) |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.12 | ColumnzxGponTreatmentRuleOuterPrioInsert | read-write | current | Use this value as the priority to insert in the outer VLAN tag. (0-7)(4 bits) |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.13 | ColumnzxGponTreatmentRuleOuterVID | read-write | current | Treatment VID: (13 bits) |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.14 | ColumnzxGponTreatmentRuleOuterVIDInsert | read-write | current | Use this value as the VID in the outer VLAN tag. (0-4094)(13 bits) |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.15 | ColumnzxGponTreatmentRuleOuterTPID | read-write | current | Treatment outer TPID/DE: (3 bits) 000 Copy TPID (and DE, if present) from inner tag of received frame 001 Copy TPID (and DE, if present) from outer tag of rece… |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.16 | ColumnzxGponTreatmentRuleRefCnt | read-only | current | Forbidden to delete table entry if not equal zero. |
| 1.3.6.1.4.1.3902.1012.3.50.20.2.1.17 | ColumnzxGponTreatmentRuleEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.20.3 | TablezxGponVoIPMediaProfileTable | not-accessible | current | An instance of this managed entity may be referenced by one or more VoIP Voice CTP managed entities. |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1 | RowzxGponVoIPMediaProfileEntry | not-accessible | current | It is entry in the zxGponVoIPMediaProfileTable. |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.1 | ColumnzxGponVoIPMediaProfileId | not-accessible | current | This attribute provides a unique number for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.2 | ColumnzxGponVoIPMediaProfileName | read-write | current | This attribute provides a unique number for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.3 | ColumnzxGponVoIPMediaProfileFaxMode | read-write | current | Selects the fax mode, values are 0 - passthru, 1 - ITU-T T.38. Default value is 0 (R, W, Set-by-create) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.4 | ColumnzxGponVoIPMediaProfileFirstCodecSelection | read-write | current | Specifies the codec selection as defined by RFC 3551. Default Value is 0-PCMU. (R, W, Set-by-create) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.5 | ColumnzxGponVoIPMediaProfileFirstPacketPeriodSelection | read-write | current | This attribute selects the Packet Period Selection interval in milliseconds. Default value is 10. Valid values are 10 - 30 ms. (R, W, Set-by-create) (mandatory… |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.6 | ColumnzxGponVoIPMediaProfileFirstSilenceSelection | read-write | current | This attribute indicates whether silence suppression is on or off. Valid values are 0 = off and 1 = on. (R, Set-by-create) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.7 | ColumnzxGponVoIPMediaProfileSecondCodecSelection | read-write | current | Specifies the codec selection as defined by RFC 3551. Default Value is 0-PCMU. (R, W, Set-by-create) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.8 | ColumnzxGponVoIPMediaProfileSecondPacketPeriodSelection | read-write | current | This attribute selects the Packet Period Selection interval in milliseconds. Default value is 10. Valid values are 10 - 30 ms. (R, W, Set-by-create) (mandatory… |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.9 | ColumnzxGponVoIPMediaProfileSecondSilenceSelection | read-write | current | This attribute indicates whether silence suppression is on or off. Valid values are 0 = off and 1 = on. (R, Set-by-create) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.10 | ColumnzxGponVoIPMediaProfileThirdCodecSelection | read-write | current | Specifies the codec selection as defined by RFC 3551. Default Value is 0-PCMU. (R, W, Set-by-create) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.11 | ColumnzxGponVoIPMediaProfileThirdPacketPeriodSelection | read-write | current | This attribute selects the Packet Period Selection interval in milliseconds. Default value is 10. Valid values are 10 - 30 ms. (R, W, Set-by-create) (mandatory… |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.12 | ColumnzxGponVoIPMediaProfileThirdSilenceSelection | read-write | current | This attribute indicates whether silence suppression is on or off. Valid values are 0 = off and 1 = on. (R, Set-by-create) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.13 | ColumnzxGponVoIPMediaProfileFourthCodecSelection | read-write | current | Specifies the codec selection as defined by RFC 3551. Default Value is 0-PCMU. (R, W, Set-by-create) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.14 | ColumnzxGponVoIPMediaProfileFourthPacketPeriodSelection | read-write | current | This attribute selects the Packet Period Selection interval in milliseconds. Default value is 10. Valid values are 10 - 30 ms. (R, W, Set-by-create) (mandatory… |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.15 | ColumnzxGponVoIPMediaProfileFourthSilenceSelection | read-write | current | This attribute indicates whether silence suppression is on or off. Valid values are 0 = off and 1 = on. (R, Set-by-create) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.16 | ColumnzxGponVoIPMediaProfileOOBDTMF | read-write | current | This attribute defines the Out-of-band DMTF Enable. When enabled (value = 1) , DTMF tones are carried out of band via RTP or the associated signaling protocol.… |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.17 | ColumnzxGponVoiceServiceProfileAALAnnouncementType | read-write | current | This attribute provides the announcement to the customer going off-hook when no call has been attempted. |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.18 | ColumnzxGponVoiceServiceProfileAALJitterTarget | read-write | current | This attribute provides the target value of the jitter buffer. The system will try to maintain the jitter buffer at the target value. Units are in milliseconds… |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.19 | ColumnzxGponVoiceServiceProfileAALJitterBufMax | read-write | current | This attribute provides the maximum depth of the jitter buffer associated with this service. Units are in milliseconds. (R, W, Set-by-create) (mandatory for AA… |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.20 | ColumnzxGponVoiceServiceProfileAALEchoCancelInd | read-write | current | This Boolean attribute indicates whether echo cancellation is on or off, where the value TRUE implies that it is on. (R, Set-by-create) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.21 | ColumnzxGponVoiceServiceProfileAALPSTNVariant | read-write | current | This attribute controls which variant of POTS signalling shall be used on the associated UNIs. The value used is equal to the 'country code'. (R, Set-by-Create… |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.22 | ColumnzxGponRTPProfileLocalPortMin | read-write | current | This attribute defines the base RTP port that should be used for voice traffic. Default is 50000 (R, W, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.23 | ColumnzxGponRTPProfileLocalPortMax | read-write | current | This attribute defines the top end range RTP port used for voice traffic. Default must be greater than LocalPortMin but is determined by vendor application. (R… |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.24 | ColumnzxGponRTPProfileDSCPMark | read-write | current | Diffserv code point to be used for outgoing RTP packets for this profile. Default value is Expedited Forwarding (EF) = 0x2E (0b00101110). (R, W, Set-by-create)… |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.25 | ColumnzxGponRTPProfilePiggybackEvents | read-write | current | Enables or disables RTP piggyback events. 0x0 = Disabled. 0x1 = Enabled. Default value is Disabled (0x0). (R, W, Set-by-create) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.26 | ColumnzxGponRTPProfileToneEvents | read-write | current | Enables or disables handling of tones via RTP Tone Events per RFC2833. 0x0 = Disabled. 0x1 = Enabled. Default value is Disabled (0x0). (R, W, Set-by-create) (m… |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.27 | ColumnzxGponRTPProfileDTMFEvents | read-write | current | Enables or disables handling of DTMF via RTP DTMF Events per RFC2833. This attribute is ignored unless the OOB DTMF attribute in the VoIP Media Profile ME is s… |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.28 | ColumnzxGponRTPProfileCASEvents | read-write | current | Enables or disables handling of CAS via RTP CAS Events per RFC2833. 0x0 = Disabled. 0x1 = Enabled. Default value is Disabled (0x0). (R, W, Set-by-create) (mand… |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.29 | ColumnzxGponVoIPMediaProfileRefCnt | read-only | current | Forbidden to modify table entry if not equal zero. |
| 1.3.6.1.4.1.3902.1012.3.50.20.3.1.30 | ColumnzxGponVoIPMediaProfileEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.20.4 | TablezxGponNetworkDialPlanTable | not-accessible | current | An instance of this managed entity may be associated with one or more instances of the SIP User Data managed entity. |
| 1.3.6.1.4.1.3902.1012.3.50.20.4.1 | RowzxGponNetworkDialPlanEntry | not-accessible | current | It is entry in the zxGponNetworkDialPlanTable. |
| 1.3.6.1.4.1.3902.1012.3.50.20.4.1.1 | ColumnzxGponNetworkDialPlanId | not-accessible | current | This attribute provides a unique number for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.4.1.2 | ColumnzxGponNetworkDialPlanName | read-write | current | This attribute indicates the name of the dial plan table. |
| 1.3.6.1.4.1.3902.1012.3.50.20.4.1.3 | ColumnzxGponNetworkDialPlanTableMaxSize | read-write | current | This attribute indicates the maximum number of dial plans that can be stored in the dial plan table. (R, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.4.1.4 | ColumnzxGponNetworkDialPlanCriticalDialTimeout | read-write | current | This attribute defines the critical dial timeout for digit map processing in milliseconds. Default value is 4000ms. (R, W, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.4.1.5 | ColumnzxGponNetworkDialPlanParticalDialTimeout | read-write | current | This attribute defines the partial dial timeout for digit map processing in milliseconds. Default value is 16000ms. (R, W, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.4.1.6 | ColumnzxGponNetworkDialPlanFormat | read-write | current | This attribute define the dial plan format standard that is supported in the ONT for VoIP. Valid values include 0 = not defined, 1 = H.248 format with specific… |
| 1.3.6.1.4.1.3902.1012.3.50.20.4.1.7 | ColumnzxGponNetworkDialPlanRefCnt | read-only | current | Forbidden to modify if not equal zero |
| 1.3.6.1.4.1.3902.1012.3.50.20.4.1.8 | ColumnzxGponNetworkDialPlanEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.20.5 | TablezxGponNetworkDialPlanOperationTable | not-accessible | current | An instance of this managed entity may be associated with one or more instances of the SIP User Data managed entity. Here, the operations of Dial Plan Table ar… |
| 1.3.6.1.4.1.3902.1012.3.50.20.5.1 | RowzxGponNetworkDialPlanOperationEntry | not-accessible | current | It is entry in the zxGponNetworkDialPlanOperationTable. |
| 1.3.6.1.4.1.3902.1012.3.50.20.5.1.1 | ColumnzxGponNetworkDialPlanOperationTableId | not-accessible | current | A unique identifier of a dial plan within the dial plan table (1 byte); |
| 1.3.6.1.4.1.3902.1012.3.50.20.5.1.2 | ColumnzxGponNetworkDialPlanOperationToken | read-write | current | Token used by the VoIP service to process dial plans. This ASCII string is typically delimited by ':'. (R, W) (conditionally required) (28 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.5.1.3 | ColumnzxGponNetworkDialPlanOperationEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.20.6 | TablezxGponPwProfileTable | not-accessible | current | The pseudowire maintenance profile permits the configuration of pseudowire service exception handling. It is created and deleted by the OLT. |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1 | RowzxGponPwProfileEntry | not-accessible | current | It is entry in the zxGponPwProfileTable. |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.1 | ColumnzxGponPwProfileId | not-accessible | current | This attribute provides a unique number for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.2 | ColumnzxGponPwProfileName | read-write | current | This attribute provides a unique name for each instance of this managed entity. (R, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.3 | ColumnzxGponPwProfileJtrBfrMaxDepth | read-write | current | This attribute specifies the desired maximum depth of the playout buffer in the PSN to TDM direction. The value is expressed as a multiple of the 125 us frame … |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.4 | ColumnzxGponPwProfileJtrBfrDesireDepth | read-write | current | This attribute specifies the desired nominal fill depth of the playout buffer in the PSN to TDM direction. The value is expressed as a multiple of the 125 us f… |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.5 | ColumnzxGponPwProfileFillPolicy | read-write | current | TThis attribute defines the payload bit pattern to be applied toward the TDM service if no payload packet is available to play out. The default value 0 specifi… |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.6 | ColumnzxGponPwProfileMisconnectPacketDeclr | read-write | current | The alarm declaration policy attribute defines the anomaly rate that causes the corresponding alarm to be declared. It is an integer percentage between 1..100.… |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.7 | ColumnzxGponPwProfileMisconnectPacketClr | read-write | current | The alarm clear policy attribute defines the anomaly rate that causes the corresponding alarm to be cleared. It is an integer percentage between 0..99. If no m… |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.8 | ColumnzxGponPwProfileLossPacketDeclr | read-write | current | (R, W, Set-by-create) (optional) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.9 | ColumnzxGponPwProfileLossPacketClr | read-write | current | (R, W, Set-by-create) (optional) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.10 | ColumnzxGponPwProfileBfrDeclr | read-write | current | (R, W, Set-by-create) (optional) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.11 | ColumnzxGponPwProfileBfrClr | read-write | current | (R, W, Set-by-create) (optional) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.12 | ColumnzxGponPwProfileMalformedPacketDeclr | read-write | current | (R, W, Set-by-create) (optional) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.13 | ColumnzxGponPwProfileMalformedPacketClr | read-write | current | (R, W, Set-by-create) (optional) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.14 | ColumnzxGponPwProfileRbitTxset | read-write | current | This attribute defines the number of consecutive lost packets that causes the transmitted R bit to be set in the TDM to PSN direction, indicating lost packets … |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.15 | ColumnzxGponPwProfileRbitTxClr | read-write | current | This attribute defines the number of consecutive valid packets that causes the transmitted R bit to be cleared in the TDM to PSN direction, removing the remote… |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.16 | ColumnzxGponPwProfileRbitRecieve | read-write | current | This attribute defines the action toward the Nx64 TDM interface when remote failure is indicated on packets received from the PSN (either R bit set or M = 0b10… |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.17 | ColumnzxGponPwProfileLbitRecieve | read-write | current | This attribute defines the action toward the TDM interface when far end TDM failure is indicated on packets received from the PSN (L bit set). 0 Play out servi… |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.18 | ColumnzxGponPwProfileSesThreshold | read-write | current | Number of lost, malformed or otherwise unusable packets expected in the PSN to TDM direction within a one-second interval that causes a severely errored second… |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.19 | ColumnzxGponPwProfileRefCnt | read-only | current | Forbidden to delete table entry if not equal zero. |
| 1.3.6.1.4.1.3902.1012.3.50.20.6.1.30 | ColumnzxGponPwProfileEntryStatus | read-write | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.20.7 | TablezxGponVoipAppServiceProfileTable | not-accessible | current | An instance of this managed entity is referenced by the SIP User Data ME. |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1 | RowzxGponVoipAppServiceProfileEntry | not-accessible | current | It is entry in the zxGponVoipAppServiceProfileTable. |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.1 | ColumnzxGponVoipAppServiceProfileName | not-accessible | current | The profile name of VoIP application service. |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.2 | ColumnzxGponVoipAppServiceProfileCIDFeature | read-create | current | This attribute contains a bitmap of caller ID features. Bit clear is disabled and bit set is enabled. The bit position values are: 0x01 Calling Number 0x02 Cal… |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.3 | ColumnzxGponVoipAppServiceProfileCallWaitingFeature | read-create | current | This attribute contains a bitmap of caller waiting features. Bit clear is disabled and bit set is enabled. The bit position values are: 0x01 call waiting 0x02 … |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.4 | ColumnzxGponVoipAppServiceProfileCallProgressFeature | read-create | current | This attribute contains a bitmap of call processing features. Bit clear is disabled and bit set is enabled. The bit position values are: 0x0001 3way 0x0002 cal… |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.5 | ColumnzxGponVoipAppServiceProfileCallPresentationFeature | read-create | current | This attribute contains a bitmap of call presentation features. Bit clear is disabled and bit set is enabled. The bit position values are: 0x0001 Message Waiti… |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.6 | ColumnzxGponVoipAppServiceProfileDirectConnectFeature | read-create | current | This attribute contains a bitmap of characteristics associated with the direct connect feature. Bit clear is disabled and bit set is enabled. The bit position … |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.7 | ColumnzxGponVoipAppServiceProfileDirectConnectURI | read-create | current | This attribute points to a Network Address managed entity. If this attribute is set to 0xFFFF, no URI is defined. If this attribute is set to any other value, … |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.8 | ColumnzxGponVoipAppDcUriAuthMode | read-create | current | This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Val… |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.9 | ColumnzxGponVoipAppDcUriUsername | read-create | current | This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note). (R, W) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.10 | ColumnzxGponVoipAppDcUriPassword | read-create | current | This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.11 | ColumnzxGponVoipAppDcUriRealm | read-create | current | This string attribute specifies the realm used in digest authentication. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory)… |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.12 | ColumnzxGponVoipAppServiceProfileBridgeLineAgentURI | read-create | current | This attribute points to a Network Address managed entity. If this attribute is set to 0xFFFF, no URI is defined. If this attribute is set to any other value, … |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.13 | ColumnzxGponVoipAppBlaUriAuthMode | read-create | current | This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Val… |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.14 | ColumnzxGponVoipAppBlaUriUsername | read-create | current | This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note). (R, W) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.15 | ColumnzxGponVoipAppBlaUriPassword | read-create | current | This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.16 | ColumnzxGponVoipAppBlaUriRealm | read-create | current | This string attribute specifies the realm used in digest authentication. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory)… |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.17 | ColumnzxGponVoipAppServiceProfileConferenceFactoryURI | read-create | current | This attribute points to a Network Address managed entity. If this attribute is set to 0xFFFF, no URI is defined. If this attribute is set to any other value, … |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.18 | ColumnzxGponVoipAppCcUriAuthMode | read-create | current | This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Val… |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.19 | ColumnzxGponVoipAppCcUriUsername | read-create | current | This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note). (R, W) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.20 | ColumnzxGponVoipAppCcUriPassword | read-create | current | This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.21 | ColumnzxGponVoipAppCcUriRealm | read-create | current | This string attribute specifies the realm used in digest authentication. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory)… |
| 1.3.6.1.4.1.3902.1012.3.50.20.7.1.50 | ColumnzxGponVoipAppServiceProfileEntryStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1012.3.50.20.8 | TablezxGponVoipFeatureAccessCodeTable | not-accessible | current | An instance of this managed entity is referenced by the SIP User Data ME. Each access code is a string of characters from the set {0..9, *, #}, with trailing n… |
| 1.3.6.1.4.1.3902.1012.3.50.20.8.1 | RowzxGponVoipFeatureAccessCodeEntry | not-accessible | current | It is entry in the zxGponVoipFeatureAccessCodeTable. |
| 1.3.6.1.4.1.3902.1012.3.50.20.8.1.1 | ColumnzxGponFeatureAccessCodePrfName | not-accessible | current | The profile name of VoIP feature access codes. |
| 1.3.6.1.4.1.3902.1012.3.50.20.8.1.2 | ColumnzxGponVoipFeatureAccessCodeCancelCallWaiting | read-create | current | This attribute defines the feature access code for cancel call waiting. (R, W) (optional) (5 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.8.1.3 | ColumnzxGponVoipFeatureAccessCodeCallHold | read-create | current | This attribute defines the feature access code for call hold. (R, W) (optional) (5 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.8.1.4 | ColumnzxGponVoipFeatureAccessCodeCallPark | read-create | current | This attribute defines the feature access code for call park. (R, W) (optional) (5 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.8.1.5 | ColumnzxGponVoipFeatureAccessCodeCIDSActivate | read-create | current | This attribute defines the feature access code for CIDS activate. (R, W) (optional) (5 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.8.1.6 | ColumnzxGponVoipFeatureAccessCodeCIDSDeactivate | read-create | current | This attribute defines the feature access code for CIDS deactivate. (R, W) (optional) (5 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.8.1.7 | ColumnzxGponVoipFeatureAccessCodeDoNotDisturbActivation | read-create | current | This attribute defines the feature access code to activate do not disturb. (R, W) (optional) (5 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.8.1.8 | ColumnzxGponVoipFeatureAccessCodeDoNotDisturbDeactivation | read-create | current | This attribute defines the feature access code to deactivate do not disturb. (R, W) (optional) (5 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.8.1.9 | ColumnzxGponVoipFeatureAccessCodeDoNotDisturbPINChange | read-create | current | This attribute defines the feature access code for do not disturb. (R, W) (optional) (5 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.8.1.10 | ColumnzxGponVoipFeatureAccessCodeEmergencyServiceNumber | read-create | current | This attribute defines the emergency service number. Example: 911. (R, W) (optional) (5 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.8.1.11 | ColumnzxGponVoipFeatureAccessCodeIntercomService | read-create | current | This attribute defines the feature access code for in home intercom service. (R, W) (optional) (5 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.8.1.12 | ColumnzxGponVoipFacUnattendedCallTrans | read-create | current | This attribute defines the feature access code for unattended call trans. (R, W) (optional) (5 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.8.1.13 | ColumnzxGponVoipFacAttendedCallTrans | read-create | current | This attribute defines the feature access code for attended call trans. (R, W) (optional) (5 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.8.1.50 | ColumnzxGponVoipFeatureAccessCodeEntryStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1012.3.50.20.9 | TablezxGponTrafficSchedulerProfileTable | not-accessible | current | An instance of this managed entity is referenced by the TrafficSchedulerUNI. |
| 1.3.6.1.4.1.3902.1012.3.50.20.9.1 | RowzxGponTrafficSchedulerProfileEntry | not-accessible | current | It is entry in the zxGponTrafficSchedulerProfileTable. |
| 1.3.6.1.4.1.3902.1012.3.50.20.9.1.1 | ColumnzxGponTrafficSchedulerProfileId | not-accessible | current | Profile index. |
| 1.3.6.1.4.1.3902.1012.3.50.20.9.1.2 | ColumnzxGponTrafficSchedulerProfileName | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.20.9.1.3 | ColumnzxGponTrafficSchedulerProfileMode | read-write | current | This attribute defines the schedule mode. 'default(4)' means using the default mode of ONT. |
| 1.3.6.1.4.1.3902.1012.3.50.20.9.1.4 | ColumnzxGponTrafficSchedulerProfileQueueMap | read-write | current | This attribute defines the queue map of 802.1p prioriry. Each byte stands for the queue id(0~7). Default as: 802.1p priority cos queue id 0 0 1 0 2 1 3 1 4 2 5… |
| 1.3.6.1.4.1.3902.1012.3.50.20.9.1.5 | ColumnzxGponTrafficSchedulerProfileQueueWeight | read-write | current | This attribute defines the queue weight. Each byte stands for the weight(0~15) of queue. |
| 1.3.6.1.4.1.3902.1012.3.50.20.9.1.6 | ColumnzxGponTrafficSchedulerProfileRefCnt | read-write | current | This attribute defines the reference count of this profile. If the reference is nonzero, this profile cannot be deleted or modified. |
| 1.3.6.1.4.1.3902.1012.3.50.20.9.1.7 | ColumnzxGponTrafficSchedulerProfileEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.20.10 | TablezxGponIgmpProfileTable | not-accessible | current | This managed entity organizes data associated with IGMP profile. |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1 | RowzxGponIgmpProfileEntry | not-accessible | current | It is entry in the zxGponIgmpProfileEntry. |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.1 | ColumnzxGponIgmpProfileId | not-accessible | current | This attribute provides a unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.2 | ColumnzxGponIgmpProfileName | read-create | current | This attribute specifies the version of IGMP to be supported. |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.3 | ColumnzxGponIgmpVersion | read-create | current | This attribute specifies the version of IGMP to be supported. |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.4 | ColumnzxGponIgmpWorkMode | read-create | current | This attribute enables an IGMP function. The default value 1 specifies transparent IGMP snooping only. The value 2 specifies snooping with proxy reporting (SPR… |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.5 | ColumnzxGponIgmpFastLeaveEnable | read-create | current | This attribute enables the fast leave function. The default value false disables fast leave; true enables immediate leave. |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.6 | ColumnzxGponIgmpUpstreamTagMode | read-create | current | This attribute controls the upstream IGMP TCI attribute. |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.7 | ColumnzxGponIgmpUpstreamVlanTag | read-create | current | Under control of the upstream IGMP tag control attribute, the attribute defines a VLAN ID to add to upstream IGMP messages.While zxGponIgmpUpstreamTagMode is '… |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.8 | ColumnzxGponIgmpUpstreamPriority | read-create | current | Under control of the upstream IGMP tag control attribute, the attribute defines a priority to add to upstream IGMP messages. |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.9 | ColumnzxGponIgmpUpstreamMaxRate | read-create | current | This attribute limits the maximum rate of upstream IGMP traffic. The default value 0 imposes no rate limit on this traffic |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.10 | ColumnzxGponIgmpRobustness | read-create | current | This attribute allows tuning for possible packet loss in the network. default value 0 causes the ONT to follow the IETF recommendation to copy the robustness v… |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.11 | ColumnzxGponIgmpProxyAddressType | read-create | current | This attribute specifies the IP address typr to be used by a proxy querier. |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.12 | ColumnzxGponIgmpProxyIpAddress | read-create | current | This attribute specifies the IP address to be used by a proxy querier. Although it is not a legitimate IP address, the default value 0.0.0.0 is legal in this c… |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.13 | ColumnzxGponIgmpQueryInterval | read-create | current | This attribute specifies the interval between general queries in seconds. The default is 125 seconds. |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.14 | ColumnzxGponIgmpQueryMaxRspTime | read-create | current | This attribute is the max response time added by the proxy into general query messages directed to UNIs. It is expressed in tenths of seconds, with a default o… |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.15 | ColumnzxGponIgmpLastMembQueryInterval | read-create | current | This attribute specifies the max response time inserted into group-specific queries sent to UNIs in response to group leave messages. It is also the repetition… |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.16 | ColumnzxGponIgmpUnauthJoinFwdEnable | read-create | current | This object attribute specifies the ONT's behaviour when it receives an IGMP join request for a group that is not authorized in the dynamic addess control list… |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.17 | ColumnzxGponIptvDynamicPackageIdNames | read-create | current | This attribute specifies the IPTV dynamic package name list, such as 'AA,BB,CC,,,FF,,'. |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.18 | ColumnzxGponIptvStaticPackageIdNames | read-create | current | This attribute specifies the IPTV Static name list, such as 'AA'. |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.19 | ColumnzxGponIgmpRefCnt | read-only | current | Forbidden to delete table entry if not equal zero. |
| 1.3.6.1.4.1.3902.1012.3.50.20.10.1.50 | ColumnzxGponIgmpRowStatus | read-create | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.20.11 | TablezxGponSipProfileTable | not-accessible | current | This table includes sip profile configuration. |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1 | RowzxGponSipProfileEntry | not-accessible | current | It is entry in the zxGponSipProfileTable. |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.1 | ColumnzxGponSipProfileId | not-accessible | current | This object indicates the profile ID. |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.2 | ColumnzxGponSipProfileName | read-create | current | This object indicates the profile name. |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.3 | ColumnzxGponSipProxyServerAddress | read-create | current | This attribute points to a large string ME that contains the name (IP address or URI) of the SIP proxy server for SIP signalling messages. (R, W, Set-by-create… |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.4 | ColumnzxGponSipOutboundProxyAddress | read-create | current | This attribute points to a large string ME that contains the name (IP address or URI) of the outbound proxy server for SIP signalling messages. An outbound SIP… |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.5 | ColumnzxGponSipPrimaryDns | read-create | current | This attribute specifies the primary SIP DNS IP address. If this value is 0, no primary SIP DNS is defined. The default value is 0. (R, W, Set-by-create) (mand… |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.6 | ColumnzxGponSipSecondaryDns | read-create | current | This attribute specifies the secondary SIP DNS IP address. If this value is 0, no secondary SIP DNS is defined. The default value is 0. (R, W, Set-by-create) (… |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.7 | ColumnzxGponSipUdpPort | read-create | current | This attribute specifies the port number that offers the UDP service. (R, W, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.8 | ColumnzxGponSipIpHostId | read-create | current | This attribute points to the IP host config data ME associated with this TCP/UDP data. Any number of ports and protocols may be associated with an IP host. (R,… |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.9 | ColumnzxGponSipRegExpTime | read-create | current | This attribute defines the SIP Registration Expiration Time in seconds. If this value is zero, the SIP Agent will not add an expiration time to the registratio… |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.10 | ColumnzxGponSipReregHeadStartTime | read-create | current | This attribute provides the time in seconds prior to timeout that the SIP Agent should start the re-registration process. The default value used at Create shal… |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.11 | ColumnzxGponSipHostPartUri | read-create | current | This attribute provides a pointer to a LargeString ME that contains the host or domain part of the SIP Address of Record for users connected to this ONT. A 0xF… |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.12 | ColumnzxGponSipRegServer | read-create | current | This attribute provides a pointer to a Network Address ME that contains the name (IP address or resolved name) of the SIP Registrar Server for SIP signaling me… |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.13 | ColumnzxGponSipValidationScheme | read-create | current | This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Val… |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.14 | ColumnzxGponSipRegUsername | read-create | current | This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note). (R, W) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.15 | ColumnzxGponSipRegPassword | read-create | current | This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.16 | ColumnzxGponSipRealm | read-create | current | This string attribute specifies the realm used in digest authentication. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory)… |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.17 | ColumnzxGponSipSsVendor | read-create | current | This attribute identifies the SIP Gateway softswitch vendor. The format is four ASCII coded alphabetic characters [A - Z] as defined in ANSI T1.220, All NULL c… |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.18 | ColumnzxGponSipNetworkDialPlanPtr | read-create | current | Pointer to Network Dial Plan ME. A value of 0xFFFF indicates that no network dial plan is available. Default value is 0xFFFF. (R, W, Set-by-create) (mandatory)… |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.19 | ColumnzxGponSipReleaseTimer | read-create | current | This attribute contains a release timer defined in seconds. 0x0 = Use internal default, Default value is 10 sec. (R, W) (optional)(1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.20 | ColumnzxGponSipRohTimer | read-create | current | This attribute defines the length of time in seconds for the receiver off hook condition before ROH tone is applied. 0x0 = ROH is disabled. Default value is 15… |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.21 | ColumnzxGponSipTosDscpOption | read-create | current | The mode of QoS tag. 1:tos 2:dscp |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.22 | ColumnzxGponSipTosDscpValue | read-create | current | This attribute assocites with 'zxGponSipTosDscpOption'. Tos values: 0~7; Dscp values: 0~63. |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.23 | ColumnzxGponSipMediaUdpPort | read-create | current | This attribute specifies the port number that offers the UDP service. (R, W, Set-by-create) (mandatory) (2 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.24 | ColumnzxGponSipMediaTosDscpOption | read-create | current | The mode of QoS tag. 1:tos 2:dscp |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.25 | ColumnzxGponSipMediaTosDscpValue | read-create | current | This attribute assocites with 'zxGponSipMediaTosDscpOption'. Tos values: 0~7; Dscp values: 0~63. |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.26 | ColumnzxGponSipLinkTestEnable | read-create | current | Heart beat message type. |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.27 | ColumnzxGponSipLinkTestInterval | read-create | current | This attribute specifies Link Test Interval in seconds. Value 0 (not set). The default value is 20 seconds. |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.29 | ColumnzxGponSipRefCnt | read-only | current | Forbidden to delete table entry if not equal zero. |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.30 | ColumnzxGponSipRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.40 | ColumnzxGponVoipAppServicePrf | read-create | current | This attribute refers to the name of table '.zxGponVoipAppServiceProfileTable'. |
| 1.3.6.1.4.1.3902.1012.3.50.20.11.1.41 | ColumnzxGponVoipFeatureAccessCodePrf | read-create | current | This attribute refers to the name of table 'zxGponVoipFeatureAccessCodeTable'. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12 | TablezxGponMgcProfileTable | not-accessible | current | This table includes mgc profile configuration. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1 | RowzxGponMgcProfileEntry | not-accessible | current | It is entry in the zxGponMgcProfileTable. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.1 | ColumnzxGponMgcProfileId | not-accessible | current | This object indicates the profile ID. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.2 | ColumnzxGponMgcProfileName | read-create | current | This object indicates the profile name. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.3 | ColumnzxGponMgcPrimaryServer | read-create | current | This attribute points to a network address ME that contains the name (IP address or resolved name) of the primary MGC that controls the signalling messages. (R… |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.4 | ColumnzxGponMgcPrimaryValidScheme | read-create | current | This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Val… |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.5 | ColumnzxGponMgcPrimaryUsername | read-create | current | This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note). (R, W) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.6 | ColumnzxGponMgcPrimaryPassword | read-create | current | This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.7 | ColumnzxGponMgcPrimaryRealm | read-create | current | This string attribute specifies the realm used in digest authentication. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory)… |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.8 | ColumnzxGponMgcSecondaryServer | read-create | current | This attribute points to a network address ME that contains the name (IP address or resolved name) of the secondary or backup MGC that controls the signalling … |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.9 | ColumnzxGponMgcSecondaryValidScheme | read-create | current | This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Val… |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.10 | ColumnzxGponMgcSecondaryUsername | read-create | current | This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note). (R, W) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.11 | ColumnzxGponMgcSecondaryPassword | read-create | current | This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory) (25 bytes) |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.12 | ColumnzxGponMgcSecondaryRealm | read-create | current | This string attribute specifies the realm used in digest authentication. If the string is shorter than 25 bytes, it must be null terminated. (R, W) (mandatory)… |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.13 | ColumnzxGponMgcMessageFormat | read-create | current | This attribute defines the message format. Valid values are: 1 Text long 2 Text short 3 Binary The default value is 0. (R, W, Set-by-create) (mandatory) (1 byt… |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.14 | ColumnzxGponMgcUdpPort | read-create | current | This attribute specifies the port number that offers the TCP/UDP service. (R, W, Set-by-create) (mandatory) (2 bytes) The port is optional and defaults to 2944… |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.15 | ColumnzxGponMgcIpHostId | read-create | current | This attribute points to the IP host config data ME associated with this TCP/UDP data. Any number of ports and protocols may be associated with an IP host. (R,… |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.16 | ColumnzxGponMgcVersion | read-create | current | This integer attribute reports the version of the Megaco protocol in use. (R, W, Set-by-create) (mandatory) (1 byte) |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.17 | ColumnzxGponMgcMaxRetryTime | read-create | current | This attribute specifies the maximum retry time for MGC transactions, in seconds. The default value 0 specifies vendor-specific implementation (R, W) (optional… |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.18 | ColumnzxGponMgcMaxRetryAttempts | read-create | current | This attribute specifies the maximum number of times a message is retransmitted to the MGC. The default value 0 specifies vendor-specific implementation. (R, W… |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.19 | ColumnzxGponMgcServiceChangeDelay | read-create | current | The attribute specifies the service status delay time for changes in line service status. This attribute is specified in seconds. The default value 0 specifies… |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.20 | ColumnzxGponMgcSsVendor | read-create | current | This attribute identifies the gateway softswitch vendor. The format is four ASCII coded alphabetic characters [A..Z] as defined in [ATIS 0322000]. A value of f… |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.21 | ColumnzxGponMgcTidPrefix | read-create | current | The attribute specifies the base string for the H.248 physical termination id(s)for this ONT. This string is intended to uniquely identify an ONT. Vendor speci… |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.22 | ColumnzxGponMgcUserTidAssignPolicy | read-create | current | Default value '1' indicates User TID is assigned by ONT. The value '2' indicates that User TID is produced by the config data. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.23 | ColumnzxGponMgcUserTidPrefix | read-create | current | User TID Prefix. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.24 | ColumnzxGponMgcUserTidPostfixLen | read-create | current | Length of User TID Postfix |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.25 | ColumnzxGponMgcUserTidPostfixStartNum | read-create | current | Start Number of User TID Postfix. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.26 | ColumnzxGponMgcRtpTidAssignPolicy | read-create | current | Default value '1' indicates RTP TID is assigned by ONT. The value '2' indicates that RTP TID is produced by the config data. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.27 | ColumnzxGponMgcRtpTidPrefix | read-create | current | RTP TID Prefix. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.28 | ColumnzxGponMgcRtpTidPostfixLen | read-create | current | Length of RTP TID Postfix. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.29 | ColumnzxGponMgcRtpTidPostfixStartNum | read-create | current | Start number of RTP TID Postfix. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.30 | ColumnzxGponMgcTosDscpOption | read-create | current | The mode of QoS tag. 1:tos 2:dscp |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.31 | ColumnzxGponMgcTosDscpValue | read-create | current | This attribute assocites with 'zxGponMgcTosDscpOption'. Tos values: 0~7; Dscp values: 0~63. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.32 | ColumnzxGponMgcMediaUdpPort | read-create | current | This attribute specifies the port number that offers the TCP/UDP service. (R, W, Set-by-create) (mandatory) (2 bytes) The port is optional and defaults to 2944… |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.33 | ColumnzxGponMgcMediaTosDscpOption | read-create | current | The mode of QoS tag. 1:tos 2:dscp |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.34 | ColumnzxGponMgcMediaTosDscpValue | read-create | current | This attribute assocites with 'zxGponMgcMediaTosDscpOption'. Tos values: 0~7; Dscp values: 0~63. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.35 | ColumnzxGponMgcHeartBeatMsgType | read-create | current | Heart beat message type. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.36 | ColumnzxGponMgcHeartBeatInterval | read-create | current | This attribute defines the heart beat interval in milliseconds. The default value is 60000 ms. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.37 | ColumnzxGponMgcRtpLinkDetection | read-create | current | RTP link detection flag. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.38 | ColumnzxGponMgcNumShortestMatch | read-create | current | Number shortest match flag. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.39 | ColumnzxGponMgcDigitMapLongTimer | read-create | current | This attribute defines the DigitMap Long Timer for digit map processing in milliseconds. Valid values: 2000~60000. The default value is 20000 ms. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.40 | ColumnzxGponMgcDigitMapShortTimer | read-create | current | This attribute defines the DigitMap Short Timer for digit map processing in milliseconds. Valid values: 2000~60000 .The default value is 5000ms |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.41 | ColumnzxGponMgcDigitMapStartTimer | read-create | current | This attribute defines the DigitMap Start Timer for digit map processing in milliseconds. Valid values: 2000~60000 .The default value is 10000 ms. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.42 | ColumnzxGponMgcMinReregTimer | read-create | current | This attribute defines the ReReg Timer Min in milliseconds. Valid values: 0~500000 .The default value is 60000 ms. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.43 | ColumnzxGponMgcMaxReregTimer | read-create | current | This attribute defines the ReReg Timer Max in milliseconds. Valid values: 0~500000 .The default value is 120000 ms. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.44 | ColumnzxGponMgcRegMsgRetranTimer | read-create | current | This attribute defines the RegMsg Retran Timer in milliseconds. Valid values: 100~50000 .The default value is 2000 ms |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.45 | ColumnzxGponMgcTotalRetranTime | read-create | current | This attribute defines the Total Retran Time in milliseconds. Valid values: 100~500000 .The default value is 10000 ms. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.46 | ColumnzxGponMgcPassiveHeartBeatEnable | read-create | current | This attribute defines the MGC passive heart beat enable. The default value is disabled. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.47 | ColumnzxGponMgcMinAvalancheTimer | read-create | current | This attribute defines the avalanche timer minimum in milliseconds. Valid values: 0~500000. The default value is 10000 ms. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.48 | ColumnzxGponMgcMaxAvalancheTimer | read-create | current | This attribute defines the avalanche timer maximum in milliseconds. Valid values: 0~500000 .The default value is 60000 ms. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.49 | ColumnzxGponMgcRefCnt | read-only | current | Forbidden to delete table entry if not equal zero. |
| 1.3.6.1.4.1.3902.1012.3.50.20.12.1.50 | ColumnzxGponMgcRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.20.13 | TablezxGponDscp2CosProfileTable | not-accessible | current | This attribute specifies the profile that mapping from DSCP to P-bits. |
| 1.3.6.1.4.1.3902.1012.3.50.20.13.1 | RowzxGponDscp2CosProfileEntry | not-accessible | current | It is entry in the zxGponDscp2CosProfileEntry. |
| 1.3.6.1.4.1.3902.1012.3.50.20.13.1.1 | ColumnzxGponDscp2CosProfileId | not-accessible | current | This attribute provides a unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.50.20.13.1.2 | ColumnzxGponDscp2CosProfileName | read-create | current | This attribute provides a unique name for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.50.20.13.1.3 | ColumnzxGponDscp2CosMapping | read-create | current | This attribute specifies mapping from DSCP to P-bits. The attribute can be considered a bit string sequence of 64 3-bit groups. The 64 sequence entries represe… |
| 1.3.6.1.4.1.3902.1012.3.50.20.13.1.4 | ColumnzxGponDscp2CosProfileRefCnt | read-only | current | Forbidden to delete table entry if not equal zero. |
| 1.3.6.1.4.1.3902.1012.3.50.20.13.1.10 | ColumnzxGponDscp2CosProfileEntryStatus | read-create | current | This attribute specifies the action of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.20.14 | TablezxGponVoipIpProfileTable | not-accessible | current | VoIP IP profile table. |
| 1.3.6.1.4.1.3902.1012.3.50.20.14.1 | RowzxGponVoipIpProfileEntry | not-accessible | current | VoIP IP profile entry. Entries in the zxGponVoipIpProfileTable are created and deleted using the zxGponVoipVlanProfileRowStatus object. |
| 1.3.6.1.4.1.3902.1012.3.50.20.14.1.1 | ColumnzxGponVoipIpProfileName | not-accessible | current | The profile name is a display string. It is an index of this table. |
| 1.3.6.1.4.1.3902.1012.3.50.20.14.1.2 | ColumnzxGponVoipIpProfileGatewayType | read-create | current | The type of IP address denoted in zxGponVoipIpProfileGateway object. |
| 1.3.6.1.4.1.3902.1012.3.50.20.14.1.3 | ColumnzxGponVoipIpProfileGateway | read-create | current | The default gateway address used for IP host services, this attribute has default value 0 (not set). If this value is set, it overrides any values returned in … |
| 1.3.6.1.4.1.3902.1012.3.50.20.14.1.4 | ColumnzxGponVoipIpProfilePriDnsType | read-create | current | The type of IP address denoted in zxGponVoipIpProfilePriDns object. |
| 1.3.6.1.4.1.3902.1012.3.50.20.14.1.5 | ColumnzxGponVoipIpProfilePriDns | read-create | current | The address of the primary DNS server, this attribute has default value 0 (not set). If this value is set, it overrides any values returned in DHCP. The addres… |
| 1.3.6.1.4.1.3902.1012.3.50.20.14.1.6 | ColumnzxGponVoipIpProfileSecDnsType | read-create | current | The type of IP address denoted in zxGponVoipIpProfileSecDns object. |
| 1.3.6.1.4.1.3902.1012.3.50.20.14.1.7 | ColumnzxGponVoipIpProfileSecDns | read-create | current | The address of the secondary DNS server, this attribute has default value 0 (not set). If this value is set, it overrides any values returned in DHCP. The addr… |
| 1.3.6.1.4.1.3902.1012.3.50.20.14.1.30 | ColumnzxGponVoipIpProfileRefCnt | read-only | current | Forbidden to delete table entry if not equal zero. |
| 1.3.6.1.4.1.3902.1012.3.50.20.14.1.31 | ColumnzxGponVoipIpProfileRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1012.3.50.20.15 | TablezxGponVoipVlanProfileTable | not-accessible | current | VoIP VLAN Profile table. |
| 1.3.6.1.4.1.3902.1012.3.50.20.15.1 | RowzxGponVoipVlanProfileEntry | not-accessible | current | VoIP VLAN Profile entry. Entries in the zxGponVoipVlanProfileTable are created and deleted using the zxGponVoipVlanProfileRowStatus object. |
| 1.3.6.1.4.1.3902.1012.3.50.20.15.1.1 | ColumnzxGponVoipVlanProfileName | not-accessible | current | This object indicates the profile name. |
| 1.3.6.1.4.1.3902.1012.3.50.20.15.1.2 | ColumnzxGponVoipVlanProfileTagMode | read-create | current | VLAN tag mode. If mode is tag, zxGponVoipVlanProfileSVlanId need not be configuration. If mode is vlanStacking, zxGponVoipVlanProfileSVlanId should be configur… |
| 1.3.6.1.4.1.3902.1012.3.50.20.15.1.3 | ColumnzxGponVoipVlanProfileCVlanId | read-create | current | CVLAN tag ID. |
| 1.3.6.1.4.1.3902.1012.3.50.20.15.1.4 | ColumnzxGponVoipVlanProfileCVlanPri | read-create | current | CVLAN tag priority. |
| 1.3.6.1.4.1.3902.1012.3.50.20.15.1.5 | ColumnzxGponVoipVlanProfileSVlanId | read-create | current | SVLAN tag ID.The zero means invalid value. |
| 1.3.6.1.4.1.3902.1012.3.50.20.15.1.30 | ColumnzxGponVoipVlanProfileRefCnt | read-only | current | Forbidden to delete table entry if not equal zero. |
| 1.3.6.1.4.1.3902.1012.3.50.20.15.1.50 | ColumnzxGponVoipVlanProfileRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1012.3.50.20.16 | TablezxGponRmTrafficPrfTable | not-accessible | current | This table contains information of ONU traffic profile configuration. The traffic descriptor allows for traffic management. A priority controlled ONT can point… |
| 1.3.6.1.4.1.3902.1012.3.50.20.16.1 | RowzxGponRmTrafficPrfEntry | not-accessible | current | It is an entry in the zxGponRmTrafficPrfTable. |
| 1.3.6.1.4.1.3902.1012.3.50.20.16.1.1 | ColumnzxGponRmTrafficPrfName | not-accessible | current | Traffic profile name. |
| 1.3.6.1.4.1.3902.1012.3.50.20.16.1.2 | ColumnzxGponRmTrafficPrfCir | read-create | current | This attribute specifies committed information rate. |
| 1.3.6.1.4.1.3902.1012.3.50.20.16.1.3 | ColumnzxGponRmTrafficPrfPir | read-create | current | This attribute specifies peak information rate. The value 0 accepts the ONU's factory policy. |
| 1.3.6.1.4.1.3902.1012.3.50.20.16.1.4 | ColumnzxGponRmTrafficPrfCbs | read-create | current | This attribute specifies committed block size, in bytes. |
| 1.3.6.1.4.1.3902.1012.3.50.20.16.1.5 | ColumnzxGponRmTrafficPrfPbs | read-create | current | This attribute specifies peak block size, in bytes. The value 0 accepts the ONU's factory policy. |
| 1.3.6.1.4.1.3902.1012.3.50.20.16.1.6 | ColumnzxGponRmTrafficPrfColourMode | read-create | current | This attribute specifies whether the colour marking algorithm considers pre-existing marking on ingress packets (colour-aware) or ignores it (colour-blind). If… |
| 1.3.6.1.4.1.3902.1012.3.50.20.16.1.7 | ColumnzxGponRmTrafficPrfInColourMark | read-create | current | This attribute is meaningful in colour-aware mode. It specifies how the pre-existing drop precedence is marked on ingress packets. For DEI and PCP marking, a d… |
| 1.3.6.1.4.1.3902.1012.3.50.20.16.1.8 | ColumnzxGponRmTrafficPrfOutColourMark | read-create | current | This attribute specifies how drop precedence is to be marked by the ONT on egress packets. If set to internal marking only, the externally visible packet conte… |
| 1.3.6.1.4.1.3902.1012.3.50.20.16.1.9 | ColumnzxGponRmTrafficPrfMeterType | read-create | current | This attribute specifies the algorithm used to determine the colour of the packet. |
| 1.3.6.1.4.1.3902.1012.3.50.20.16.1.10 | ColumnzxGponRmTrafficPrfRefCnt | read-only | current | This attribute indicates the reference count of profile. |
| 1.3.6.1.4.1.3902.1012.3.50.20.16.1.50 | ColumnzxGponRmTrafficPrfRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot b… |
| 1.3.6.1.4.1.3902.1012.3.50.21 | NodezxGponRmServiceMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.21.1 | TablezxGponServiceTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.50.21.1.1 | RowzxGponServiceEntry | not-accessible | current | It is entry in the zxGponServiceTable. |
| 1.3.6.1.4.1.3902.1012.3.50.21.1.1.1 | ColumnzxGponServiceName | read-write | current | The white space can't be included in the name. |
| 1.3.6.1.4.1.3902.1012.3.50.21.1.1.2 | ColumnzxGponServiceType | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.21.1.1.3 | ColumnzxGponServiceIfId | read-write | current | 4bytes value contains:type(MSB 2bytes)/ifId(LSB 2bytes). type means 2 iphost |
| 1.3.6.1.4.1.3902.1012.3.50.21.1.1.4 | ColumnzxGponServiceGemPort | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.21.1.1.5 | ColumnzxGponServiceMapType | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.21.1.1.6 | ColumnzxGponServiceMapCos | read-write | current | 1 byte value stands for the list of 802.1p priority. MSB stands for priority 7, LSB stands for priority 0. |
| 1.3.6.1.4.1.3902.1012.3.50.21.1.1.7 | ColumnzxGponServiceMapVlan | read-write | current | Each 2 bytes stand for the vlan id related with this service. The first N*2 bytes are valid, until vlan id=0. |
| 1.3.6.1.4.1.3902.1012.3.50.21.1.1.8 | ColumnzxGponServiceMVlan | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.21.1.1.30 | ColumnzxGponServiceEntryStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.50.22 | NodezxGponRmFirewallMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.22.1 | TablezxGponOnuIpFilterTable | not-accessible | current | Gpon onu ip filter table. |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1 | RowzxGponOnuIpFilterEntry | not-accessible | current | It is entry in the zxGponOnuIpFilterTable. |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.1 | ColumnzxGponOnuIpFilterIndex | not-accessible | current | Gpon onu ip filter index |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.2 | ColumnzxGponOnuIpFilterState | read-create | current | Gpon onu ip filter state |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.3 | ColumnzxGponOnuIpFilterMode | read-create | current | Gpon onu ip filter mode. |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.4 | ColumnzxGponOnuIpFilterProtocol | read-create | current | Gpon onu ip filter protocol. |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.5 | ColumnzxGponOnuIpFilterStartSrcIpType | read-create | current | Gpon onu ip filter start source ip type. |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.6 | ColumnzxGponOnuIpFilterStartSrcIpAddr | read-create | current | Gpon onu ip filter start source ip.The configuration of zxGponOnuIpFilterStartSrcIpAddr is optional. |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.7 | ColumnzxGponOnuIpFilterEndSrcIpType | read-create | current | Gpon onu ip filter end source ip address type |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.8 | ColumnzxGponOnuIpFilterEndSrcIpAddr | read-create | current | Gpon onu ip filter end source ip address.When zxGponOnuIpFilterStartSrcIpAddr is not configured, zxGponOnuIpFilterEndSrcIpAddr can not be configured. |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.9 | ColumnzxGponOnuIpFilterStartDestIpType | read-create | current | Gpon onu ip filter start destination ip type. |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.10 | ColumnzxGponOnuIpFilterStartDestIpAddr | read-create | current | Gpon onu ip filter start destination ip.The configuration of zxGponOnuIpFilterStartDestIpAddr is optional. |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.11 | ColumnzxGponOnuIpFilterEndDestIpType | read-create | current | Gpon onu ip filter end destination ip type.. |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.12 | ColumnzxGponOnuIpFilterEndDestIpAddr | read-create | current | Gpon onu ip filter end destination ip address.When zxGponOnuIpFilterStartDestIpAddr is not configured, zxGponOnuIpFilterEndDestIpAddr can not be configured. |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.13 | ColumnzxGponOnuIpFilterStartSrcPort | read-create | current | Gpon onu ip filter start source port.The configuration of zxGponOnuIpFilterStartSrcPort is optional. |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.14 | ColumnzxGponOnuIpFilterEndSrcPort | read-create | current | Gpon onu ip filter end source port.The configuration of zxGponOnuIpFilterEndSrcPort is optional.When zxGponOnuIpFilterStartSrcPort is not configured, zxGponOnu… |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.15 | ColumnzxGponOnuIpFilterStartDestPort | read-create | current | Gpon onu ip filter start dest port.The configuration of zxGponOnuIpFilterEndSrcPort is optional. |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.16 | ColumnzxGponOnuIpFilterEndDestPort | read-create | current | Gpon onu ip filter end dest port.The configuration of zxGponOnuIpFilterEndSrcPort is optional.When zxGponOnuIpFilterStartDestPort is not configured, zxGponOnuI… |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.17 | ColumnzxGponOnuIpFilterIngressIfType | read-create | current | Gpon onu ip filter ingress type.The configuration of zxGponOnuIpFilterIngressIfType is optional. |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.18 | ColumnzxGponOnuIpFilterIngressIfId | read-create | current | The interface id which is related with this interface. It can be the IfId of lan,ethuni or iphost, according to the zxGponOnuIpFilterIngressType. The format as… |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.19 | ColumnzxGponOnuIpFilterEgressIfType | read-create | current | Gpon onu ip filter egress type.The configuration of zxGponOnuIpFilterEgressIfType is optional. |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.20 | ColumnzxGponOnuIpFilterEgressIfId | read-create | current | The interface id which is related with this interface. It can be the IfId of lan,ethuni or iphost, according to the zxGponOnuIpFilterEgressType. The format as … |
| 1.3.6.1.4.1.3902.1012.3.50.22.1.1.50 | ColumnzxGponOnuIpFilterEntryStatus | read-create | current | Entry status of zxGponOnuIpFilterTable. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2 | TablezxGponPortForwardTable | not-accessible | current | This table configure wan to lan port foward rules. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1 | RowzxGponPortForwardEntry | not-accessible | current | Gpon port forward table entry. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.1 | ColumnzxGponPortForwardIndex | not-accessible | current | Gpon port forward index. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.2 | ColumnzxGponPortForwardState | read-create | current | Disable or enable forward rule. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.3 | ColumnzxGponPortForwardProtocol | read-create | current | Gpon port forward protocol type. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.4 | ColumnzxGponPortForwardMappingType | read-create | current | Gpon port forward mapping type. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.5 | ColumnzxGponPortForwardIpHostId | read-create | current | Gpon port forward IpHost Id. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.6 | ColumnzxGponPortForwardLanHostIpType | read-create | current | This attribute specifies the LAN HostIp ip address type. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.7 | ColumnzxGponPortForwardLanHostIp | read-create | current | Gpon port forward LAN host ip. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.8 | ColumnzxGponPortForwardLanHostMac | read-create | current | Gpon port forward LAN host MAC address. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.9 | ColumnzxGponPortForwardLanStartPort | read-create | current | Gpon port forward LAN start port. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.10 | ColumnzxGponPortForwardLanEndPort | read-create | current | Gpon port forward LAN end port. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.11 | ColumnzxGponPortForwardWanStartPort | read-create | current | Gpon port forward WAN start port. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.12 | ColumnzxGponPortForwardWanEndPort | read-create | current | Gpon port forward WAN end port. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.13 | ColumnzxGponPortForwardWanStartIpType | read-create | current | Gpon port forward wan start ip address type. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.14 | ColumnzxGponPortForwardWanStartIp | read-create | current | Gpon port forward WAN start ip address. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.15 | ColumnzxGponPortForwardWanEndIpType | read-create | current | Gpon port forward wan end ip address type. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.16 | ColumnzxGponPortForwardWanEndIp | read-create | current | Gpon port forward wan end ip address. |
| 1.3.6.1.4.1.3902.1012.3.50.22.2.1.40 | ColumnzxGponPortForwardEntryStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.23 | NodezxGponRmSecurityMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.23.1 | TablezxGponOnuSecCtrlTable | not-accessible | current | This table includes ONU security information. |
| 1.3.6.1.4.1.3902.1012.3.50.23.1.1 | RowzxGponOnuSecCtrlEntry | not-accessible | current | An entry in zxGponOnuSecCtrlTable. |
| 1.3.6.1.4.1.3902.1012.3.50.23.1.1.1 | ColumnzxGponOnuSecCtrlEnhancedEnable | read-write | current | Enable or disable the ONU enhanced security control function. |
| 1.3.6.1.4.1.3902.1012.3.50.23.1.1.2 | ColumnzxGponOnuSecCtrlEnhancedPsk | read-write | current | A PSK of 128 bits simplifies the application of security algorithms based on AES-128 (e.g. AES-CMAC-128). A PSK is associated with a particular ONU and is stor… |
| 1.3.6.1.4.1.3902.1012.3.50.24 | NodezxGponRmQosMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.24.1 | TablezxGponUniTrafficTreatTable | not-accessible | current | This table includes ONU UNI traffic treat information. |
| 1.3.6.1.4.1.3902.1012.3.50.24.1.1 | RowzxGponUniTrafficTreatEntry | not-accessible | current | An entry in zxGponUniTrafficTreatTable. |
| 1.3.6.1.4.1.3902.1012.3.50.24.1.1.1 | ColumnzxGponUniTrafficVlan | not-accessible | current | The traffic VLAN, value 4096 means VLAN is not cared. VLAN 0 is a UNTAG message with priority. |
| 1.3.6.1.4.1.3902.1012.3.50.24.1.1.2 | ColumnzxGponUniTrafficPrio | not-accessible | current | The traffic priority, value 8 means priority is not cared. |
| 1.3.6.1.4.1.3902.1012.3.50.24.1.1.3 | ColumnzxGponUniTrafficEthernetType | not-accessible | current | The traffic Ethernet type. |
| 1.3.6.1.4.1.3902.1012.3.50.24.1.1.4 | ColumnzxGponUniTrafficCir | read-create | current | The committed information rate. |
| 1.3.6.1.4.1.3902.1012.3.50.24.1.1.5 | ColumnzxGponUniTrafficTreatMode | read-create | current | The traffic treat mode. When the value is rateLimit indicates rate limit to traffic, the value is prioRemark indicates remarking priority. |
| 1.3.6.1.4.1.3902.1012.3.50.24.1.1.6 | ColumnzxGponUniTrafficLowerPrioRemark | read-create | current | Remark the priority when traffic rate is lower than zxGponUniTrafficCir. This object is valid when zxGponUniTrafficTreatMode is prioRemark(2). |
| 1.3.6.1.4.1.3902.1012.3.50.24.1.1.7 | ColumnzxGponUniTrafficUpperPrioRemark | read-create | current | Remark the priority when traffic rate is upper than zxGponUniTrafficCir. This object is valid when zxGponUniTrafficTreatMode is prioRemark(2). |
| 1.3.6.1.4.1.3902.1012.3.50.24.1.1.8 | ColumnzxGponUniTrafficRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1012.3.50.24.2 | TablezxGponGemPortQosTable | not-accessible | current | This table contains information of ONU GEM port QoS configuration. One entry in this table reflects a configuration table defined by a manager which can be use… |
| 1.3.6.1.4.1.3902.1012.3.50.24.2.1 | RowzxGponGemPortQosEntry | not-accessible | current | An entry in zxGponGemPortQosTable. |
| 1.3.6.1.4.1.3902.1012.3.50.24.2.1.1 | ColumnzxGponGemPortUsTrafficProfile | read-write | current | This attribute points to the instance of the GEM traffic descriptor managed entity that contains the upstream traffic parameters used for this GEM port network… |
| 1.3.6.1.4.1.3902.1012.3.50.24.2.1.2 | ColumnzxGponGemPortDsTrafficProfile | read-write | current | This attribute points to the instance of the traffic descriptor managed entity that contains the downstream traffic parameters for this GEM port network CTP. I… |
| 1.3.6.1.4.1.3902.1012.3.50.24.2.1.3 | ColumnzxGponGemPortUsPrio0ToTcontQueue | read-write | current | This attribute points to the instance of the priority queue-G used for this GEM port with priority 0 in the upstream direction. |
| 1.3.6.1.4.1.3902.1012.3.50.24.2.1.4 | ColumnzxGponGemPortUsPrio1ToTcontQueue | read-write | current | This attribute points to the instance of the priority queue-G used for this GEM port with priority 1 in the upstream direction. |
| 1.3.6.1.4.1.3902.1012.3.50.24.2.1.5 | ColumnzxGponGemPortUsPrio2ToTcontQueue | read-write | current | This attribute points to the instance of the priority queue-G used for this GEM port with priority 2 in the upstream direction. |
| 1.3.6.1.4.1.3902.1012.3.50.24.2.1.6 | ColumnzxGponGemPortUsPrio3ToTcontQueue | read-write | current | This attribute points to the instance of the priority queue-G used for this GEM port with priority 3 in the upstream direction. |
| 1.3.6.1.4.1.3902.1012.3.50.24.2.1.7 | ColumnzxGponGemPortUsPrio4ToTcontQueue | read-write | current | This attribute points to the instance of the priority queue-G used for this GEM port with priority 4 in the upstream direction. |
| 1.3.6.1.4.1.3902.1012.3.50.24.2.1.8 | ColumnzxGponGemPortUsPrio5ToTcontQueue | read-write | current | This attribute points to the instance of the priority queue-G used for this GEM port with priority 5 in the upstream direction. |
| 1.3.6.1.4.1.3902.1012.3.50.24.2.1.9 | ColumnzxGponGemPortUsPrio6ToTcontQueue | read-write | current | This attribute points to the instance of the priority queue-G used for this GEM port with priority 6 in the upstream direction. |
| 1.3.6.1.4.1.3902.1012.3.50.24.2.1.10 | ColumnzxGponGemPortUsPrio7ToTcontQueue | read-write | current | This attribute points to the instance of the priority queue-G used for this GEM port with priority 7 in the upstream direction. |
| 1.3.6.1.4.1.3902.1012.3.50.24.2.1.11 | ColumnzxGponGemPortDsUniId | read-write | current | This attribute points to an Ethernet UNI where the physical path terminates and Ethernet physical level functions are performed. |
| 1.3.6.1.4.1.3902.1012.3.50.24.2.1.12 | ColumnzxGponGemPortDsToUniQueue | read-write | current | This attribute points to the instance of the priority queue-G used for this GEM port network CTP in the downstream direction. |
| 1.3.6.1.4.1.3902.1012.3.50.25 | NodezxGponRmVeipMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.25.2 | TablezxGponVeipTable | not-accessible | current | zxGponVeipTable table. This managed entity represents the data plane hand-off point in an ONU to a separate (non-OMCI) management domain. The virtual Ethernet … |
| 1.3.6.1.4.1.3902.1012.3.50.25.2.1 | RowzxGponVeipEntry | not-accessible | current | zxGponVeipEntry entry. GPON VEIP configuration entry. |
| 1.3.6.1.4.1.3902.1012.3.50.25.2.1.1 | ColumnzxGponVeipIndex | not-accessible | current | This attribute uniquely identifies each instance of this managed entity. To facilitate easy discovery, the ONU should assign IDs in the sequence 1, 2, .... The… |
| 1.3.6.1.4.1.3902.1012.3.50.25.2.1.2 | ColumnzxGponVeipAdminStatus | read-write | current | This attribute locks and unlocks the functions performed by this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.50.25.2.1.3 | ColumnzxGponVeipOperStatus | read-only | current | This attribute indicates whether or not the managed entity is capable of performing its function. Valid values are enabled and disabled. |
| 1.3.6.1.4.1.3902.1012.3.50.25.2.1.4 | ColumnzxGponVeipInterDomainName | read-write | current | This attribute is a character string that provides an optional way to identify the virtual Ethernet interface point to a non-OMCI management domain. The interf… |
| 1.3.6.1.4.1.3902.1012.3.50.25.2.1.5 | ColumnzxGponVeipIsPortAssigned | read-write | current | This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP conne… |
| 1.3.6.1.4.1.3902.1012.3.50.25.2.1.6 | ColumnzxGponVeipProtocolType | read-write | current | This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP conne… |
| 1.3.6.1.4.1.3902.1012.3.50.25.2.1.7 | ColumnzxGponVeipAssignedPort | read-write | current | This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP conne… |
| 1.3.6.1.4.1.3902.1012.3.50.25.2.1.8 | ColumnzxGponVeipHostId | read-write | current | This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP conne… |
| 1.3.6.1.4.1.3902.1012.3.50.25.2.1.9 | ColumnzxGponVeipIanaAssignedPort | read-only | current | This attribute contains the TCP or UDP port value as assigned by IANA for the management protocol associated with this virtual Ethernet interface. This attribu… |
| 1.3.6.1.4.1.3902.1012.3.50.26 | NodezxGponRmTr069Mgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.26.2 | TablezxGponTr069AcsTable | not-accessible | current | zxGponTr069AcsTable table. If functions within the ONU are managed by [BBF TR-69], this ME allows OMCI configuration of the ACS URL and related authentication … |
| 1.3.6.1.4.1.3902.1012.3.50.26.2.1 | RowzxGponTr069AcsEntry | not-accessible | current | zxGponTr069AcsEntry entry. GPON Tr069 management server configuration entry. |
| 1.3.6.1.4.1.3902.1012.3.50.26.2.1.1 | ColumnzxGponTr069AcsAdminStatus | read-write | current | This attribute locks and unlocks the functions performed by this managed entity. When the administrative state is locked, the functions of this ME are disabled… |
| 1.3.6.1.4.1.3902.1012.3.50.26.2.1.2 | ColumnzxGponTr069AcsUri | read-write | current | This attribute points to the large string ME that contains the network address. It may contain a fully qualified domain name, URI or IP address. The URI may al… |
| 1.3.6.1.4.1.3902.1012.3.50.26.2.1.3 | ColumnzxGponTr069AcsValidationScheme | read-write | current | This attribute specifies the validation scheme used when the ONT validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Val… |
| 1.3.6.1.4.1.3902.1012.3.50.26.2.1.4 | ColumnzxGponTr069AcsUsername | read-write | current | This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated (Note). |
| 1.3.6.1.4.1.3902.1012.3.50.26.2.1.5 | ColumnzxGponTr069AcsPassword | read-write | current | This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. |
| 1.3.6.1.4.1.3902.1012.3.50.26.2.1.6 | ColumnzxGponTr069AcsRealm | read-write | current | This string attribute specifies the realm used in md5 digest authentication. If the string is shorter than 25 bytes, it must be null terminated. |
| 1.3.6.1.4.1.3902.1012.3.50.26.2.1.7 | ColumnzxGponTr069AssociatedTag | read-write | current | This attribute is a TCI value for TR-69 management traffic passing through the virtual ethernet interface point. A TCI, comprising user priority, CFI and VID, … |
| 1.3.6.1.4.1.3902.1012.3.50.27 | NodezxGponRmTestMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.27.2 | TablezxGponIpHostTestTable | not-accessible | current | The test action for IP host config data entity class, including ping and traceroute. |
| 1.3.6.1.4.1.3902.1012.3.50.27.2.1 | RowzxGponIpHostTestEntry | not-accessible | current | It is the entry of zxGponIpHostTestTable. |
| 1.3.6.1.4.1.3902.1012.3.50.27.2.1.1 | ColumnzxGponIpHostTestAction | read-write | current | This attribute specifies the test action. It includes ping test and trace route test. |
| 1.3.6.1.4.1.3902.1012.3.50.27.2.1.2 | ColumnzxGponIpHostTestIpAddressType | read-write | current | This objects indicates the type of IP address stored in the corresponding zxGponIpHostTestIpAddress object. |
| 1.3.6.1.4.1.3902.1012.3.50.27.2.1.3 | ColumnzxGponIpHostTestIpAddress | read-write | current | This attribute specifies the IP address of target. |
| 1.3.6.1.4.1.3902.1012.3.50.27.3 | TablezxGponPingResultTable | not-accessible | current | Test result for IP host config data entity class, including ping and trace route. |
| 1.3.6.1.4.1.3902.1012.3.50.27.3.1 | RowzxGponPingResultEntry | not-accessible | current | It is the entry of the zxGponPingResultTable. |
| 1.3.6.1.4.1.3902.1012.3.50.27.3.1.1 | ColumnzxGponPingResultStatus | read-only | current | This attribute specifies the status of Ping test. notStarted:The test is not started, and the result is unavailable. inProgress:The test is in progress, and th… |
| 1.3.6.1.4.1.3902.1012.3.50.27.3.1.2 | ColumnzxGponPingResultSentProbes | read-only | current | The value of this object reflects the number of probes sent. The value of this object must be reported as 0 when no probes have been sent. |
| 1.3.6.1.4.1.3902.1012.3.50.27.3.1.3 | ColumnzxGponPingResultProbeResponses | read-only | current | Number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received. |
| 1.3.6.1.4.1.3902.1012.3.50.27.3.1.4 | ColumnzxGponPingResultMaxRtt | read-only | current | The maximum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.3902.1012.3.50.27.3.1.5 | ColumnzxGponPingResultMinRtt | read-only | current | The minimum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.3902.1012.3.50.27.3.1.6 | ColumnzxGponPingResultAverageRtt | read-only | current | The average ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.3902.1012.3.50.28 | NodezxGponRmWanMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.50.28.2 | TablezxGponRmWanConfTable | not-accessible | current | WAN configuration data table. |
| 1.3.6.1.4.1.3902.1012.3.50.28.2.1 | RowzxGponRmWanConfEntry | not-accessible | current | WAN configuration data entry. Entries in the zxGponRmWanConfTable are created and deleted using the zxGponRmWanConfRowStatus object. |
| 1.3.6.1.4.1.3902.1012.3.50.28.2.1.1 | ColumnzxGponRmWanIndex | not-accessible | current | This attribute refers to the index of WAN. |
| 1.3.6.1.4.1.3902.1012.3.50.28.2.1.2 | ColumnzxGponRmWanServiceType | read-create | current | This attribute contains a bitmap of service type. 1 indicates the service is transported over WAN. The bit position values are: bit0:Internet bit1:TR069 manage… |
| 1.3.6.1.4.1.3902.1012.3.50.28.2.1.3 | ColumnzxGponRmWanAssociatedIpHostId | read-create | current | The IP host WAN associated with. This attribute is related to 'zxGponRmWanServiceType'. This attribute is optional when 'zxGponRmWanServiceType' supports inter… |
| 1.3.6.1.4.1.3902.1012.3.50.28.2.1.4 | ColumnzxGponRmWanAssociatedEthUni | read-create | current | This attribute contains a bitmap of Ethernet UNI associated with WAN. A bit value of 1 indicates the service of the Ethernet UNI is transported over WAN, and t… |
| 1.3.6.1.4.1.3902.1012.3.50.28.2.1.5 | ColumnzxGponRmWanAssociatedSsid | read-create | current | This attribute contains a bitmap of SSID associated with WAN. A bit value of 1 indicates the SSID service is transported over WAN, and the default bit value is… |
| 1.3.6.1.4.1.3902.1012.3.50.28.2.1.6 | ColumnzxGponRmWanMVid | read-create | current | This attribute specifies the multicast VLAN associated with this WAN config data. This attribute is related to 'zxGponRmWanServiceType'. This attribute is vali… |
| 1.3.6.1.4.1.3902.1012.3.50.28.2.1.7 | ColumnzxGponRmWanMtu | read-create | current | This attribute specifies the MTU value. A value of 0 indicates ONU's internal default. |
| 1.3.6.1.4.1.3902.1012.3.50.28.2.1.8 | ColumnzxGponRmWanOnlineDuration | read-only | current | This attribute reports the time in second that this WAN is online. |
| 1.3.6.1.4.1.3902.1012.3.50.28.2.1.50 | ColumnzxGponRmWanConfRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1012.3.50.28.3 | TablezxAnGponRmOnuWanConfTable | not-accessible | current | WAN global control table of ONU. |
| 1.3.6.1.4.1.3902.1012.3.50.28.3.1 | RowzxAnGponRmOnuWanConfEntry | not-accessible | current | It is entry in the zxAnGponRmOnuWanConfTable. |
| 1.3.6.1.4.1.3902.1012.3.50.28.3.1.1 | ColumnzxAnGponRmOnuWanMaxUserNum | read-write | current | This attribute identifies the maximum user number of WAN. The value 254 means the ONU's internal policy. The value 255 means no limit. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| OntEquipmentId | OCTET STRING (SIZE (20)) | current | Represents the specific type of ONT. |
| OntSerialNumber | OCTET STRING (SIZE (8)) | current | Represents the unique for each ONT. |
| OntVendorId | OCTET STRING (SIZE (4)) | current | Represents the vendor of the ONT. |
| OntVersionId | OCTET STRING (SIZE (14)) | current | Represents the version of the ONT. |