ZXPW-TDM-MIB
43 objects
This MIB contains managed object definitions for encapsulating TDM (T1,E1, T3, E3, NxDS0) as pseudo-wires over packet-switching networks (PSN). This MIB supplements the ZXPW-STD-MIB as in: Zelig, D., Nadeau,T. 'Pseudo Wire (PW) Management Information Base'. The ZXPW-STD-MIB contains structures and MIB associations generic to Pseudo-Wire (PW) emulation. PW-specific MIBs (such as this) contain config and stats for specific PW types.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue |
| ZTE-MASTER-MIB | zxPwCTDM |
| ZXPW-STD-MIB | zxPwIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.1013.2.1.2 | IdentityzxPwCTDMMIB | This MIB contains managed object definitions for encapsulating TDM (T1,E1, T3, E3, NxDS0) as pseudo-wires over packet-switching networks (PSN). This MIB supple… | ||
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1 | NodezxPwCTDMObjects | |||
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.1 | TablezxPwCTDMTable | not-accessible | current | This table contains basic information including ifIndex, and pointers to entries in the relevant TDM config tables for this TDM PW. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.1.1 | RowzxPwCTDMEntry | not-accessible | current | This table is indexed by the same index that was created for the associated entry in the PW Table (in the ZXPW-STD-MIB). - The zxPwIndex. An entry is created i… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.1.1.1 | ColumnzxPwCTDMRate | read-write | current | The parameter represents the bit-rate of the TDM service in multiples of the 'basic' 64 Kbit/s rate. It complements the definition of zxPwType used in ZXPW-STD… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.1.1.2 | ColumnzxPwCTDMIfIndex | read-write | current | This is a unique index within the ifTable. It represents the interface index of the full link or the interface index for the bundle holding the group of time s… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.1.1.3 | ColumnzxPwCGenTDMCfgIndex | read-write | current | Index to the generic parameters in the TDM configuration table that appears in this MIB module. It is likely that multiple TDM PWs of the same characteristic w… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.1.1.4 | ColumnzxPwCRelTDMCfgIndex | read-write | current | Index to the relevant TDM configuration table entry that appears in one of the related MIB modules such as TDMoIP or CESoPSN. It is likely that multiple TDM PW… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.1.1.5 | ColumnzxPwCTDMConfigError | read-only | current | Any of the bits are set if the local configuration is not compatible with the peer configuration as available from the various parameters options. -tdmTypeInco… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.1.1.6 | ColumnzxPwCTDMTimeElapsed | read-only | current | The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adju… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.1.1.7 | ColumnzxPwCTDMValidIntervals | read-only | current | The number of previous 15-minute intervals for which data was collected. An agent with TDM capability must be capable of supporting at least n intervals. The m… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.1.1.8 | ColumnzxPwCTDMValidDayIntervals | read-only | current | The number of previous days for which data was collected. An agent with TDM capability must be capable of supporting at least n intervals. The minimum value of… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.1.1.9 | ColumnzxPwCTDMCurrentIndications | read-only | current | The following defects should be detected and reported upon request: -Stray packets MAY be detected by the PSN and multiplexing layers. Stray packets MUST be di… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.1.1.10 | ColumnzxPwCTDMLatchedIndications | read-only | current | The state of TDM indicators when the TDM PW last declared an error second (either as ES, SES or a second with errors inside a UAS) condition. At this time, onl… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.1.1.11 | ColumnzxPwCTDMLastEsTimeStamp | read-only | current | The value of sysUpTime at the most recent occasion at which the TDM PW entered the ES or SES state. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.2 | ScalarzxPwCTDMCfgIndexNext | read-only | current | This object contains the value to be used for zxPwCTDMCfgIndex when creating entries in the zxPwCTDMCfgTable. The value 0 indicates that no unassigned entries … |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3 | TablezxPwCTDMCfgTable | not-accessible | current | This table contains a set of parameters that may be referenced by one or more TDM PWs in zxPwCTDMTable. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1 | RowzxPwCTDMCfgEntry | not-accessible | current | These parameters define the characteristics of a TDM PW. They are grouped here to ease NMS burden. Once an entry is created here it may be re-used by many PWs. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.1 | ColumnzxPwCTDMCfgIndex | not-accessible | current | Index to an entry in this table. The value is a copy of the assigned zxPwCTDMCfgIndexNext |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.2 | ColumnzxPwCTDMCfgRowStatus | read-create | current | Object used for creating, modifying, and deleting a row from this table. The following objects should not be modified if the entry is in used and the status is… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.3 | ColumnzxPwCTDMCfgConfErr | read-only | current | Various configuration errors. Illegal settings within the zxPwCTDMCfg table. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.4 | ColumnzxPwCTDMCfgPayloadSize | read-create | current | The value of this object indicates the PayLoad Size (in bytes) to be defined during the PW setUp. Upon TX, implementation must be capable of carrying that amou… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.5 | ColumnzxPwCTDMCfgPktReorder | read-create | current | If set True: as CE bound packets are queued in the jitter buffer, out of order packets are re-ordered. The maximum sequence number differential (i.e., the rang… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.6 | ColumnzxPwCTDMCfgRtpHdrUsed | read-create | current | If set to False: an RTP header is not pre-pended to the TDM packet. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.7 | ColumnzxPwCTDMCfgJtrBfrDepth | read-create | current | The size of this buffer SHOULD be locally configured to allow accommodation to the PSN-specific packet delay variation. If configured to a value not supported … |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.8 | ColumnzxPwCTDMCfgPayloadSuppression | read-create | current | Selecting 'enable' means: Payload suppression is allowed. Payload MAY be omitted in order to conserve bandwidth. Selecting 'disable' means: no suppresion under… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.9 | ColumnzxPwCTDMCfgConsecPktsInSynch | read-create | current | The number of consecutive packets with sequential sequence numbers that are required to exit the LOPS state. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.10 | ColumnzxPwCTDMCfgConsecMissPktsOutSynch | read-create | current | The number of consecutive missing packets that are required to enter the LOPS state. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.11 | ColumnzxPwCTDMCfgSetUp2SynchTimeOut | read-create | current | The amount of time the host should wait before declaring the pseudo wire in down state, if the number of consecutive TDM packets that have been received after … |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.12 | ColumnzxPwCTDMCfgPktReplacePolicy | read-create | current | This parameter determines the value to be played when CE bound packets have over/underflow the jitter buffer, or are missing for any reason. This byte pattern … |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.13 | ColumnzxPwCTDMCfgAvePktLossTimeWindow | read-create | current | The length of time over which the average packet loss rate should be computed to detect Excessive packet loss rate |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.14 | ColumnzxPwCTDMCfgExcessivePktLossThreshold | read-create | current | Excessive packet loss rate is detected by computing the average packetloss rate over a zxPwCTDMCfgAvePktLossTimeWindow amount of time and comparing it with thi… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.15 | ColumnzxPwCTDMCfgAlarmThreshold | read-create | current | Alarms are only reported when the defect state persists for the length of time specified by this object. The object's unit is millisec |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.16 | ColumnzxPwCTDMCfgClearAlarmThreshold | read-create | current | Alarm MUST be cleared after the corresponding defect is undetected for the amount of time specified by this object. The object's unit is millisec |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.17 | ColumnzxPwCTDMCfgMissingPktsToSes | read-create | current | Number of missing packets detected (consecutive or not) within a 1 second window to cause a Severely Error Second (SES) to be counted. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.18 | ColumnzxPwCTDMCfgTimestampMode | read-create | current | Timestamp generation MAY be used in one of the following modes: 1. Absolute mode: the PSN-bound IWF sets timestamps using the clock recovered from the incoming… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.19 | ColumnzxPwCTDMCfgQueueSize | read-create | current | The actual queue size is the 'zxPwCTDMCfgQueueSize' power of 2. The range of this object is from 1 to 10. But when resequencing, the maximum value is 7. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.20 | ColumnzxPwCTDMCfgName | read-create | current | |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.21 | ColumnzxPwCTDMCfgSSRC | read-create | current | This object must be set when zxPwCTDMCfgRtpHdrUsed is 'TRUE'. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.22 | ColumnzxPwCTDMCfgStorageType | read-create | current | This variable indicates the storage type for this row. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.50 | NodezxPwCTDMGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.1013.2.1.2.1.50.1 | ScalarzxPwCTDMCompatible | read-only | current | The PW TDM compatibility. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means support to config str… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PwTDMCfgIndex | Unsigned32 | current | Index into any of the relevant pwCXXXCfgTable. |