MIB Viewer

MIB Viewer is a free SNMP MIB browser and database with over 12,000 MIBs and 1,600,000 OIDs. Search by name, OID, or number to look up any MIB object, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

iso/org/dod/internet/private/enterprises/.2011/huaweiMgmt/hwDatacomm/hwOspfv2MIB/hwOspfv2ProcessTable/hwOspfv2ProcessEntry/hwOspfv2LsaOrigHoldIntvl

hwOspfv2LsaOrigHoldIntvl

OBJECT-TYPE

1.3.6.1.4.1.2011.5.25.155.3.1.14

Access

read-create

Status

current

Source

HUAWEI-OSPFV2-MIB

Sub-identifiers

Description

This object indicates the Holdtime interval of intelligent-timer for updating OSPF LSAs. After an intelligent timer is enabled, the interval for updating LSAs is as follows: The initial interval for updating LSAs is specified by the parameter start-interval. The interval for updating LSAs for the nth (n>2) time is equal to hold-interval*2(n-1). When the interval specified by hold-interval*2(n-1) reaches the maximum interval specified by max-interval, OSPF updates LSAs at the maximum interval for three consecutive times. Then, OSPF updates LSAs at the initial interval specified by start-interval. When hwOspfv2LsaOrigHoldIntvl is specified, you need also specify hwOspfv2LsaOrigMaxIntvl and hwOspfv2LsaOrigStartIntvl, but you cannot specify hwOspfv2LsaOrigIntvl. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration.

Syntax

Integer32 (-1 | 1..5000)