MIB Viewer

MIB Viewer is a free SNMP MIB browser and database with over 12,000 MIBs and 1,600,000 OIDs. Search by name, OID, or number to look up any MIB object, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

iso/org/dod/internet/private/enterprises/.2011/huaweiMgmt/hwEthernetPort/.1/hwEthernetTable/hwEthernetEntry/hwifEthernetVlanDefault

hwifEthernetVlanDefault

OBJECT-TYPE

1.3.6.1.4.1.2011.5.14.1.4.1.13

Access

read-write

Status

current

Source

HUAWEI-ETHERLIKE-EXT-MIB

Sub-identifiers

Description

Describes the native VLAN of an Ethernet port. When you need to set the packets of the upstream Ethernet port with the VLAN tag, operate this leaf. After the native VLAN of the Ethernet port is configured successfully, If the VLAN ID of the Ethernet port is the same as that of the native VLAN, the packets of the upstream Ethernet port do not contain the VLAN tag, that is, the packets are untagged. If the VLAN ID of the Ethernet port is not the same as that of the native VLAN, the packets of the upstream Ethernet port contain the VLAN tag. Before specifying the native VLAN of a port, make sure that the port has been added to the VLAN. This does not work: when you set the native VLAN on a sub-port of an aggregated port. When you set the native on an aggregated master port, the configuration of all physical ports within the aggregated group is changed. Range: 1-4093 Default: 1

Syntax

Integer32 (-1 | 1..4093)