Security mode may be chosen from Disable, WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise , RADIUS-WEP or WPA_Auto. In WPA_Auto the unit will auto-detect between WPA and WPA2. All devices on the network must use the same security mode in order to communicate. If set to disabled(0): Open system. No authentication or encryption. If set to wep(1) then the following parameters must be set: Default Transmit Key (hitronWifiBssWepDefaultKey): Choose which Key to use. WEP Key Bit (hitronWifiBssWepSecurityMode): May select from 64-Bit or 128-Bit encryption. Key 1-4 (hitronWifiBssWep64BitKeyTable or hitronWifiBssWep128BitKeyTable): Enter a WEP key manually. Must use only hex character (0-9 and A-F). 64-bit WEP requires 10 hex characters, 128-Bit WEP requires the use of 26 hex characters. If set to wpaPsk(2) then the following parameters must be set: WPA Algorithm (hitronWifiBssWpaAlgorithm): TKIP or AES. WPA Pre-Shared Key (hitronWifiBssWpaPreSharedKey): Choose a unique key to authenticate with other devices on the network. The Pre-Shared Key must be between 8 and 63 characters in length. Group Key Renewal (hitronWifiBssWpaGroupRekeyInterval): This settingss determines how often the group key changes. If set to wpa2Psk(3) then the following parameters must be set: WPA2 Algorithm (hitronWifiBssWpaAlgorithm): AES or TKIP+AES. WPA2 Pre-Shared Key (hitronWifiBssWpaPreSharedKey): Choose a unique key to authenticate with other devices on the network. The Pre-Shared Key must be between 8 and 63 characters in length. Group Key Renewal (hitronWifiBssWpaGroupRekeyInterval): This settingss determines how often the group key changes. If set to wpaEnterprise(4) then the following parameters must be set: WPA Algorithm (hitronWifiBssWpaAlgorithm): TKIP or AES. RADIUS Server Address (hitronWifiBssRadiusIp): The IP address of the RADIUS server. RADIUS Server Port (hitronWifiBssRadiusPort): The port the RADIUS server uses. RADIUS Shared Secret (hitronWifiBssRadiusKey): The shared secret set on the RADIUS server. Key Renewal Timeout (hitronWifiRadiusReAuthInterval): Determines how often the keys should be renened. If set to wpa2Enterprise(5) then the following parameters must be set: WPA2 Algorithm (hitronWifiBssWpaAlgorithm): AES or TKIP+AES. RADIUS Server Address (hitronWifiBssRadiusIp): The IP address of the RADIUS server. RADIUS Server Port (hitronWifiBssRadiusPort): The port the RADIUS server uses. RADIUS Shared Secret (hitronWifiBssRadiusKey): The shared secret set on the RADIUS server. Key Renewal Timeout (hitronWifiRadiusReAuthInterval): Determines how often the keys should be renened. If set to radiusWep(6) then the following parameters must be set: RADIUS Server Address (hitronWifiBssRadiusAddressType / hitronWifiBssRadiusAddress): The IP address of the RADIUS server. RADIUS Server Port (hitronWifiBssRadiusPort): The port the RADIUS server uses. RADIUS Shared Secret (hitronWifiBssRadiusKey): The shared secret set on the RADIUS server. Default Transmit Key (hitronWifiBssWepDefaultKey): Choose which Key to use. WEP Key Bit (hitronWifiBssWepEncryptionMode): May select from 64-Bit or 128-Bit encryption. Key 1-4 (hitronWifiBssWep64BitKeyTable or hitronWifiBssWep128BitKeyTable): Enter a WEP key manually. Must use only hex character (0-9 and A-F). 64-bit WEP requires 10 hex characters, 128-Bit WEP requires the use of 26 hex characters. All other SSID, except for the primary SSID, are disabled. The primary SSID's default vlaue is wpaAuto.