LUM-IFOTDR-MIB
25 objects
The MIB module for management, information and configuration of OTDR (Optical Time-Domain Reflectometer) boards. The tables contained in this MIB are: (1) The General contains some general attributes as time stamps and tables sizes. (2) The Fiber Span group contains information and configuration for the monitored fiber spans. (3) (monitor settings) (4) (conected ports) (5) (datasets) (Needs a rewrite? Inspiration taken from IfXcFlex mib) (Other info that could be important)
Imported Objects
| LUM-REG | lumIfOtdrMIB lumModules |
| LUM-TC | AdminStatusWithNA CommandString DisplayStringWithNA EnabledDisabledWithNA FaultStatusWithNA MgmtNameString OperStatusWithNA PortNumber SlotNumber SubrackNumber Unsigned32WithNA |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.72 | IdentityifOtdrMIBModule | The MIB module for management, information and configuration of OTDR (Optical Time-Domain Reflectometer) boards. The tables contained in this MIB are: (1) The … | ||
| 1.3.6.1.4.1.8708.2.72.1 | NodelumIfOtdrConfs | |||
| 1.3.6.1.4.1.8708.2.72.1.1 | NodelumIfOtdrGroups | |||
| 1.3.6.1.4.1.8708.2.72.1.1.1 | GroupifOtdrGeneralGroupV1 | current | The general objects. | |
| 1.3.6.1.4.1.8708.2.72.1.1.2 | GroupifOtdrFiberSpanGroupV1 | current | The ifOtdrFiberSpan objects (R31.0). | |
| 1.3.6.1.4.1.8708.2.72.1.2 | NodelumIfOtdrCompl | |||
| 1.3.6.1.4.1.8708.2.72.1.2.1 | CompliancelumIfOtdrComplV1 | current | Basic implementation requirements for the OTDR MIB. (R31.0) | |
| 1.3.6.1.4.1.8708.2.72.2 | NodelumIfOtdrMIBObjects | |||
| 1.3.6.1.4.1.8708.2.72.2.1 | NodeifOtdrGeneral | |||
| 1.3.6.1.4.1.8708.2.72.2.1.1 | ScalarifOtdrGeneralConfigLastChangeTime | read-only | current | The time when the configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.72.2.1.2 | ScalarifOtdrGeneralStateLastChangeTime | read-only | current | The time when the state and/or configuration of the MIB was last changed. |
| 1.3.6.1.4.1.8708.2.72.2.1.3 | ScalarifOtdrGeneralFiberSpanTableSize | read-only | current | Size of Fiber Span table |
| 1.3.6.1.4.1.8708.2.72.2.2 | NodeifOtdrFiberSpanList | |||
| 1.3.6.1.4.1.8708.2.72.2.2.1 | TableifOtdrFiberSpanTable | not-accessible | current | <description of table goes here> |
| 1.3.6.1.4.1.8708.2.72.2.2.1.1 | RowifOtdrFiberSpanEntry | not-accessible | current | An entry in the ifOtdrFiberSpan list. |
| 1.3.6.1.4.1.8708.2.72.2.2.1.1.1 | ColumnifOtdrFiberSpanIndex | read-only | current | An arbitrary index assigned to each entry. |
| 1.3.6.1.4.1.8708.2.72.2.2.1.1.2 | ColumnifOtdrFiberSpanName | read-only | current | The management name of the object. |
| 1.3.6.1.4.1.8708.2.72.2.2.1.1.3 | ColumnifOtdrFiberSpanFiberId | read-write | current | The fiber span ID. Only accepts alphanumeric input. On otdr8p the fiber span ID can be up to 16 characters long. |
| 1.3.6.1.4.1.8708.2.72.2.2.1.1.4 | ColumnifOtdrFiberSpanSessionType | read-write | current | Depending on choice of session type, measurements will be performed with different parameters. nearField - High resolution but limited range. Max range 5 km. f… |
| 1.3.6.1.4.1.8708.2.72.2.2.1.1.5 | ColumnifOtdrFiberSpanStartMeasurementCommand | read-only | current | Start a measurement. The result of the measurement is stored in a file under /tftpboot/otdr/, using the following syntax: otdr-[subrack]-[slot]-[interfaceNumbe… |
| 1.3.6.1.4.1.8708.2.72.2.2.1.1.6 | ColumnifOtdrFiberSpanConnIfBasicIfIndex | read-create | current | An index that describes to which index in ifBasicIf table this object is related. |
| 1.3.6.1.4.1.8708.2.72.2.2.1.1.7 | ColumnifOtdrFiberSpanSubrack | read-create | current | The number of the subrack where the OTDR board is located. |
| 1.3.6.1.4.1.8708.2.72.2.2.1.1.8 | ColumnifOtdrFiberSpanSlot | read-create | current | The number of the slot where the OTDR board is located. |
| 1.3.6.1.4.1.8708.2.72.2.2.1.1.9 | ColumnifOtdrFiberSpanPortNr | read-only | current | The number of the OTDR port. |
| 1.3.6.1.4.1.8708.2.72.2.2.1.1.10 | ColumnifOtdrFiberSpanState | read-only | current | Indicates the measurement status of the interface Inactive - No measurement is ongoing on this interface. Measuring - A measurement is ongoing on this interfac… |