VPLS-BGP-MIB
24 objects
Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). The initial version of this MIB module was published in RFC 7257; for full legal notices see the RFC itself. This MIB module contains managed object definitions for BGP signaled Virtual Private LAN Service as in RFC 4761. This MIB module enables the use of any underlying pseudowire network.
Imported Objects
| PW-STD-MIB | -- RFC 3411 pwIndex |
| SNMP-FRAMEWORK-MIB | -- RFC 2579 SnmpAdminString |
| SNMPv2-CONF | -- RFC 2578 MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE transmission Unsigned32 |
| SNMPv2-TC | -- RFC 2580 RowStatus StorageType |
| VPLS-GENERIC-MIB | -- RFC 5601 vplsConfigIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.276 | IdentityvplsBgpMIB | Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with o… | ||
| 1.3.6.1.2.1.10.276.1 | NodevplsBgpObjects | |||
| 1.3.6.1.2.1.10.276.1.1 | TablevplsBgpConfigTable | not-accessible | current | This table specifies information for configuring and monitoring BGP-specific parameters for Virtual Private LAN Service (VPLS). |
| 1.3.6.1.2.1.10.276.1.1.1 | RowvplsBgpConfigEntry | not-accessible | current | A row in this table represents BGP-specific information for Virtual Private LAN Service (VPLS) in a packet network. It is indexed by vplsConfigIndex, which uni… |
| 1.3.6.1.2.1.10.276.1.1.1.1 | ColumnvplsBgpConfigVERangeSize | read-write | current | Specifies the size of the range of VPLS Edge Identifier (VE ID) in this VPLS service. This number controls the size of the label block advertised for this VE b… |
| 1.3.6.1.2.1.10.276.1.2 | TablevplsBgpVETable | not-accessible | current | This table associates VPLS Edge devices to a VPLS service |
| 1.3.6.1.2.1.10.276.1.2.1 | RowvplsBgpVEEntry | not-accessible | current | An entry in this table is created for each VE ID configured on a PE for a particular VPLS service instance. Entries in this table may be created or deleted thr… |
| 1.3.6.1.2.1.10.276.1.2.1.1 | ColumnvplsBgpVEId | not-accessible | current | A secondary index identifying a VE within an instance of a VPLS service. The VE ID takes 2 octets in VPLS BGP NLRI according to RFC 4761. Hence, we have limite… |
| 1.3.6.1.2.1.10.276.1.2.1.2 | ColumnvplsBgpVEName | read-create | current | Descriptive name for the site or user-facing PE (U-PE) associated with this VE ID. |
| 1.3.6.1.2.1.10.276.1.2.1.3 | ColumnvplsBgpVEPreference | read-create | current | Specifies the preference of the VE ID on this Provider Edge (PE) if the site is multihomed and VE ID is reused. |
| 1.3.6.1.2.1.10.276.1.2.1.5 | ColumnvplsBgpVERowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. All other objects in this row must be set to valid values before this object can be… |
| 1.3.6.1.2.1.10.276.1.2.1.6 | ColumnvplsBgpVEStorageType | read-create | current | This variable indicates the storage type for this row. |
| 1.3.6.1.2.1.10.276.1.3 | TablevplsBgpPwBindTable | not-accessible | current | This table provides BGP-specific information for an association between a VPLS service and the corresponding pseudowires. A service can have more than one pseu… |
| 1.3.6.1.2.1.10.276.1.3.1 | RowvplsBgpPwBindEntry | not-accessible | current | Each row represents an association between a VPLS instance and one or more pseudowires defined in the pwTable. Each index is unique in describing an entry in t… |
| 1.3.6.1.2.1.10.276.1.3.1.1 | ColumnvplsBgpPwBindLocalVEId | read-only | current | Identifies the local VE with which this pseudowire is associated. The VE ID takes 2 octets in VPLS BGP NLRI according to RFC 4761. Hence, we have limited the r… |
| 1.3.6.1.2.1.10.276.1.3.1.2 | ColumnvplsBgpPwBindRemoteVEId | read-only | current | Identifies the remote VE with which this pseudowire is associated. The VE ID takes 2 octets in VPLS BGP NLRI according to RFC 4761. Hence, we have limited the … |
| 1.3.6.1.2.1.10.276.2 | NodevplsBgpConformance | |||
| 1.3.6.1.2.1.10.276.2.1 | NodevplsBgpCompliances | |||
| 1.3.6.1.2.1.10.276.2.1.1 | CompliancevplsBgpModuleFullCompliance | current | Compliance requirement for implementations that provide full support for VPLS-BGP-MIB. Such devices can then be monitored and configured using this MIB module. | |
| 1.3.6.1.2.1.10.276.2.1.2 | CompliancevplsBgpModuleReadOnlyCompliance | read-only | current | Compliance requirement for implementations that only provide read-only support for VPLS-BGP-MIB. Such devices can then be monitored but cannot be configured us… |
| 1.3.6.1.2.1.10.276.2.2 | NodevplsBgpGroups | |||
| 1.3.6.1.2.1.10.276.2.2.1 | GroupvplsBgpConfigGroup | current | The group of objects supporting configuration of L2VPN VPLS services using BGP. | |
| 1.3.6.1.2.1.10.276.2.2.2 | GroupvplsBgpVEGroup | current | The group of objects supporting management of VPLS Edge devices for L2VPN VPLS services using BGP. | |
| 1.3.6.1.2.1.10.276.2.2.3 | GroupvplsBgpPwBindGroup | current | The group of objects supporting management of pseudowires for L2VPN VPLS services using BGP. |