MIB Viewer

MIB Viewer is a free SNMP MIB browser and database with over 12,000 MIBs and 1,600,000 OIDs. Search by name, OID, or number to look up any MIB object, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

VPLS-LDP-MIB

17 objects

Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). The initial version of this MIB module was published in RFC 7257; for full legal notices see the RFC itself. This MIB module contains managed object definitions for LDP-signaled Virtual Private LAN Services as in RFC 4762. This MIB module enables the use of any underlying pseudowire network.

Imported Objects

PW-STD-MIB	-- RFC 2579 pwIndex pwID
SNMPv2-CONF	-- RFC 2578 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI	MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission Unsigned32
SNMPv2-TC	-- RFC 2580 TruthValue
VPLS-GENERIC-MIB	-- RFC 5601 vplsConfigIndex vplsConfigName

OID	Name	Access	Status	Description
1.3.6.1.2.1.10.275	IdentityvplsLdpMIB			Copyright (c) 2014 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with o…
1.3.6.1.2.1.10.275.0	NodevplsLdpNotifications
1.3.6.1.2.1.10.275.0.1	NotificationvplsLdpPwBindMacTableFull		current	The vplsLdpPwBindMacTableFull notification is generated when the number of learned MAC addresses increases to the value specified in vplsLdpPwBindMacAddressLim…
1.3.6.1.2.1.10.275.1	NodevplsLdpObjects
1.3.6.1.2.1.10.275.1.1	TablevplsLdpConfigTable	not-accessible	current	This table specifies information for configuring and monitoring LDP-specific parameters for Virtual Private LAN Service (VPLS).
1.3.6.1.2.1.10.275.1.1.1	RowvplsLdpConfigEntry	not-accessible	current	A row in this table represents LDP-specific information for Virtual Private LAN Service (VPLS) in a packet network. It is indexed by vplsConfigIndex, which uni…
1.3.6.1.2.1.10.275.1.1.1.1	ColumnvplsLdpConfigMacAddrWithdraw	read-write	current	This object specifies if MAC address withdrawal is enabled in this service. If this object is 'true', then MAC address withdrawal is enabled. If 'false', then …
1.3.6.1.2.1.10.275.1.2	TablevplsLdpPwBindTable	not-accessible	current	This table provides LDP-specific information for an association between a VPLS service and the corresponding pseudowires. A service can have more than one pseu…
1.3.6.1.2.1.10.275.1.2.1	RowvplsLdpPwBindEntry	not-accessible	current	Each row represents an association between a VPLS instance and one or more pseudowires defined in the pwTable. Each index is unique in describing an entry in t…
1.3.6.1.2.1.10.275.1.2.1.1	ColumnvplsLdpPwBindMacAddressLimit	read-write	current	The value of this object specifies the maximum number of learned and static entries allowed in the Forwarding database for this PW Binding. The value 0 means t…
1.3.6.1.2.1.10.275.2	NodevplsLdpConformance
1.3.6.1.2.1.10.275.2.1	NodevplsLdpCompliances
1.3.6.1.2.1.10.275.2.1.1	CompliancevplsLdpModuleFullCompliance		current	Compliance requirement for implementations that provide full support for VPLS-LDP-MIB. Such devices can then be monitored and configured using this MIB module.
1.3.6.1.2.1.10.275.2.1.2	CompliancevplsLdpModuleReadOnlyCompliance	read-only	current	Compliance requirement for implementations that only provide read-only support for VPLS-LDP-MIB. Such devices can then be monitored but cannot be configured us…
1.3.6.1.2.1.10.275.2.2	NodevplsLdpGroups
1.3.6.1.2.1.10.275.2.2.1	GroupvplsLdpGroup		current	The group of objects supporting management of L2VPN VPLS services using LDP.
1.3.6.1.2.1.10.275.2.2.2	GroupvplsLdpNotificationGroup		current	The group of notifications supporting the Notifications generated for VPLS LDP Service.