Security mode may be chosen from Disable, WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise, RADIUS-WEP, WPA-PSK_WPA2-PSK or WPA-Enterprise_WPA2-Enterprise. All devices on the network must use the same security mode in order to communicate. If set to disabled(0): Open system. No authentication or encryption. If set to wep(1) then the following parameters must be set: Default Transmit Key (cmdot11BssWepDefaultKey): Choose which Key to use. WEP Key Bit (cmdot11BssWepEncryptionMode): May select from 64-Bit or 128-Bit encryption. Passphrase (cmdot11BssWepPassPhrase): Enter a passphrase consisting of any keyboard character to be used to generate a hex WEP key. Key 1-4 (cmdot11BssWep64BitKeyTable or cmdot11BssWep128BitKeyTable): Enter a WEP key manually. Must use only hex character (0-9 and A-F). 64-bit WEP requires 10 hex characters, 128-Bit WEP requires the use of 26 hex characters. If set to wpaPsk(2) then the following parameters must be set: WPA Algorithm (cmdot11BssWpaAlgorithm): TKIP or AES. WPA Pre-Shared Key (cmdot11BssWpaPreSharedKey): Choose a unique key to authenticate with other devices on the network. The Pre-Shared Key must be between 8 and 63 characters in length. Group Key Renewal (cmdot11BssWpaGroupRekeyInterval): This settings determines how often the group key changes. If set to wpa2Psk(3) then the following parameters must be set: WPA2 Algorithm (cmdot11BssWpaAlgorithm): AES or TKIP+AES. WPA2 Pre-Shared Key (cmdot11BssWpaPreSharedKey): Choose a unique key to authenticate with other devices on the network. The Pre-Shared Key must be between 8 and 63 characters in length. Group Key Renewal (cmdot11BssWpaGroupRekeyInterval): This settings determines how often the group key changes. If set to wpaEnterprise(4) then the following parameters must be set: WPA Algorithm (cmdot11BssWpaAlgorithm): TKIP or AES. RADIUS Server Address (cmdot11BssRadiusAddress): The IP address of the RADIUS server. RADIUS Server Port (cmdot11BssRadiusPort): The port the RADIUS server uses. RADIUS Shared Secret (cmdot11BssRadiusKey): The shared secret set on the RADIUS server. Key Renewal Timeout (cmdot11BssRadiusReAuthInterval): Determines how often the keys should be renewed. If set to wpa2Enterprise(5) then the following parameters must be set: WPA2 Algorithm (cmdot11BssWpaAlgorithm): AES or TKIP+AES. RADIUS Server Address (cmdot11BssRadiusAddress): The IP address of the RADIUS server. RADIUS Server Port (cmdot11BssRadiusPort): The port the RADIUS server uses. RADIUS Shared Secret (cmdot11BssRadiusKey): The shared secret set on the RADIUS server. Key Renewal Timeout (cmdot11BssRadiusReAuthInterval): Determines how often the keys should be renewed. If set to radiusWep(6) then the following parameters must be set: RADIUS Server Address (cmdot11BssRadiusAddressType / cmdot11BssRadiusAddress): The IP address of the RADIUS server. RADIUS Server Port (cmdot11BssRadiusPort): The port the RADIUS server uses. RADIUS Shared Secret (cmdot11BssRadiusKey): The shared secret set on the RADIUS server. Default Transmit Key (cmdot11BssWepDefaultKey): Choose which Key to use. WEP Key Bit (cmdot11BssWepEncryptionMode): May select from 64-Bit or 128-Bit encryption. Passphrase (cmdot11BssWepPassPhrase): Enter a passphrase consisting of any keyboard character to be used to generate a hex WEP key. Key 1-4 (cmdot11BssWep64BitKeyTable or cmdot11BssWep128BitKeyTable): Enter a WEP key manually. Must use only hex character (0-9 and A-F). 64-bit WEP requires 10 hex characters, 128-Bit WEP requires the use of 26 hex characters. If set to wpaPsk-wpa2Psk(7) then the following parameters must be set: WPA or WPA2 Algorithm (cmdot11BssWpaAlgorithm): AES or TKIP+AES. WPA or WPA2 Pre-Shared Key (cmdot11BssWpaPreSharedKey): Choose a unique key to authenticate with other devices on the network. The Pre-Shared Key must be between 8 and 63 characters in length. Group Key Renewal (cmdot11BssWpaGroupRekeyInterval): This settings determines how often the group key changes. If set to wpaEnterprise-wpa2Enterprise(8) then the following parameters must be set: WPA2 Algorithm (cmdot11BssWpaAlgorithm): AES or TKIP+AES. RADIUS Server Address (cmdot11BssRadiusAddress): The IP address of the RADIUS server. RADIUS Server Port (cmdot11BssRadiusPort): The port the RADIUS server uses. RADIUS Shared Secret (cmdot11BssRadiusKey): The shared secret set on the RADIUS server. Key Renewal Timeout (cmdot11BssRadiusReAuthInterval): Determines how often the keys should be renewed.